1 #ifndef _LINUX_VIRTIO_NET_H
2 #define _LINUX_VIRTIO_NET_H
3 /* This header is BSD licensed so anyone can use the definitions to implement
4  * compatible drivers/servers.
5  *
6  * Redistribution and use in source and binary forms, with or without
7  * modification, are permitted provided that the following conditions
8  * are met:
9  * 1. Redistributions of source code must retain the above copyright
10  *    notice, this list of conditions and the following disclaimer.
11  * 2. Redistributions in binary form must reproduce the above copyright
12  *    notice, this list of conditions and the following disclaimer in the
13  *    documentation and/or other materials provided with the distribution.
14  * 3. Neither the name of IBM nor the names of its contributors
15  *    may be used to endorse or promote products derived from this software
16  *    without specific prior written permission.
17  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
18  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
19  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
20  * ARE DISCLAIMED.  IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
21  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
22  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
23  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
24  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
25  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
26  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
27  * SUCH DAMAGE. */
28 #include "standard-headers/linux/types.h"
29 #include "standard-headers/linux/virtio_ids.h"
30 #include "standard-headers/linux/virtio_config.h"
31 #include "standard-headers/linux/virtio_types.h"
32 #include "standard-headers/linux/if_ether.h"
33 
34 /* The feature bitmap for virtio net */
35 #define VIRTIO_NET_F_CSUM	0	/* Host handles pkts w/ partial csum */
36 #define VIRTIO_NET_F_GUEST_CSUM	1	/* Guest handles pkts w/ partial csum */
37 #define VIRTIO_NET_F_CTRL_GUEST_OFFLOADS 2 /* Dynamic offload configuration. */
38 #define VIRTIO_NET_F_MTU	3	/* Initial MTU advice */
39 #define VIRTIO_NET_F_MAC	5	/* Host has given MAC address. */
40 #define VIRTIO_NET_F_GUEST_TSO4	7	/* Guest can handle TSOv4 in. */
41 #define VIRTIO_NET_F_GUEST_TSO6	8	/* Guest can handle TSOv6 in. */
42 #define VIRTIO_NET_F_GUEST_ECN	9	/* Guest can handle TSO[6] w/ ECN in. */
43 #define VIRTIO_NET_F_GUEST_UFO	10	/* Guest can handle UFO in. */
44 #define VIRTIO_NET_F_HOST_TSO4	11	/* Host can handle TSOv4 in. */
45 #define VIRTIO_NET_F_HOST_TSO6	12	/* Host can handle TSOv6 in. */
46 #define VIRTIO_NET_F_HOST_ECN	13	/* Host can handle TSO[6] w/ ECN in. */
47 #define VIRTIO_NET_F_HOST_UFO	14	/* Host can handle UFO in. */
48 #define VIRTIO_NET_F_MRG_RXBUF	15	/* Host can merge receive buffers. */
49 #define VIRTIO_NET_F_STATUS	16	/* virtio_net_config.status available */
50 #define VIRTIO_NET_F_CTRL_VQ	17	/* Control channel available */
51 #define VIRTIO_NET_F_CTRL_RX	18	/* Control channel RX mode support */
52 #define VIRTIO_NET_F_CTRL_VLAN	19	/* Control channel VLAN filtering */
53 #define VIRTIO_NET_F_CTRL_RX_EXTRA 20	/* Extra RX mode control support */
54 #define VIRTIO_NET_F_GUEST_ANNOUNCE 21	/* Guest can announce device on the
55 					 * network */
56 #define VIRTIO_NET_F_MQ	22	/* Device supports Receive Flow
57 					 * Steering */
58 #define VIRTIO_NET_F_CTRL_MAC_ADDR 23	/* Set MAC address */
59 #define VIRTIO_NET_F_VQ_NOTF_COAL 52	/* Device supports virtqueue notification coalescing */
60 #define VIRTIO_NET_F_NOTF_COAL	53	/* Device supports notifications coalescing */
61 #define VIRTIO_NET_F_GUEST_USO4	54	/* Guest can handle USOv4 in. */
62 #define VIRTIO_NET_F_GUEST_USO6	55	/* Guest can handle USOv6 in. */
63 #define VIRTIO_NET_F_HOST_USO	56	/* Host can handle USO in. */
64 #define VIRTIO_NET_F_HASH_REPORT  57	/* Supports hash report */
65 #define VIRTIO_NET_F_GUEST_HDRLEN  59	/* Guest provides the exact hdr_len value. */
66 #define VIRTIO_NET_F_RSS	  60	/* Supports RSS RX steering */
67 #define VIRTIO_NET_F_RSC_EXT	  61	/* extended coalescing info */
68 #define VIRTIO_NET_F_STANDBY	  62	/* Act as standby for another device
69 					 * with the same MAC.
70 					 */
71 #define VIRTIO_NET_F_SPEED_DUPLEX 63	/* Device set linkspeed and duplex */
72 
73 #ifndef VIRTIO_NET_NO_LEGACY
74 #define VIRTIO_NET_F_GSO	6	/* Host handles pkts w/ any GSO type */
75 #endif /* VIRTIO_NET_NO_LEGACY */
76 
77 #define VIRTIO_NET_S_LINK_UP	1	/* Link is up */
78 #define VIRTIO_NET_S_ANNOUNCE	2	/* Announcement is needed */
79 
80 /* supported/enabled hash types */
81 #define VIRTIO_NET_RSS_HASH_TYPE_IPv4          (1 << 0)
82 #define VIRTIO_NET_RSS_HASH_TYPE_TCPv4         (1 << 1)
83 #define VIRTIO_NET_RSS_HASH_TYPE_UDPv4         (1 << 2)
84 #define VIRTIO_NET_RSS_HASH_TYPE_IPv6          (1 << 3)
85 #define VIRTIO_NET_RSS_HASH_TYPE_TCPv6         (1 << 4)
86 #define VIRTIO_NET_RSS_HASH_TYPE_UDPv6         (1 << 5)
87 #define VIRTIO_NET_RSS_HASH_TYPE_IP_EX         (1 << 6)
88 #define VIRTIO_NET_RSS_HASH_TYPE_TCP_EX        (1 << 7)
89 #define VIRTIO_NET_RSS_HASH_TYPE_UDP_EX        (1 << 8)
90 
91 struct virtio_net_config {
92 	/* The config defining mac address (if VIRTIO_NET_F_MAC) */
93 	uint8_t mac[ETH_ALEN];
94 	/* See VIRTIO_NET_F_STATUS and VIRTIO_NET_S_* above */
95 	__virtio16 status;
96 	/* Maximum number of each of transmit and receive queues;
97 	 * see VIRTIO_NET_F_MQ and VIRTIO_NET_CTRL_MQ.
98 	 * Legal values are between 1 and 0x8000
99 	 */
100 	__virtio16 max_virtqueue_pairs;
101 	/* Default maximum transmit unit advice */
102 	__virtio16 mtu;
103 	/*
104 	 * speed, in units of 1Mb. All values 0 to INT_MAX are legal.
105 	 * Any other value stands for unknown.
106 	 */
107 	uint32_t speed;
108 	/*
109 	 * 0x00 - half duplex
110 	 * 0x01 - full duplex
111 	 * Any other value stands for unknown.
112 	 */
113 	uint8_t duplex;
114 	/* maximum size of RSS key */
115 	uint8_t rss_max_key_size;
116 	/* maximum number of indirection table entries */
117 	uint16_t rss_max_indirection_table_length;
118 	/* bitmask of supported VIRTIO_NET_RSS_HASH_ types */
119 	uint32_t supported_hash_types;
120 } QEMU_PACKED;
121 
122 /*
123  * This header comes first in the scatter-gather list.  If you don't
124  * specify GSO or CSUM features, you can simply ignore the header.
125  *
126  * This is bitwise-equivalent to the legacy struct virtio_net_hdr_mrg_rxbuf,
127  * only flattened.
128  */
129 struct virtio_net_hdr_v1 {
130 #define VIRTIO_NET_HDR_F_NEEDS_CSUM	1	/* Use csum_start, csum_offset */
131 #define VIRTIO_NET_HDR_F_DATA_VALID	2	/* Csum is valid */
132 #define VIRTIO_NET_HDR_F_RSC_INFO	4	/* rsc info in csum_ fields */
133 	uint8_t flags;
134 #define VIRTIO_NET_HDR_GSO_NONE		0	/* Not a GSO frame */
135 #define VIRTIO_NET_HDR_GSO_TCPV4	1	/* GSO frame, IPv4 TCP (TSO) */
136 #define VIRTIO_NET_HDR_GSO_UDP		3	/* GSO frame, IPv4 UDP (UFO) */
137 #define VIRTIO_NET_HDR_GSO_TCPV6	4	/* GSO frame, IPv6 TCP */
138 #define VIRTIO_NET_HDR_GSO_UDP_L4	5	/* GSO frame, IPv4& IPv6 UDP (USO) */
139 #define VIRTIO_NET_HDR_GSO_ECN		0x80	/* TCP has ECN set */
140 	uint8_t gso_type;
141 	__virtio16 hdr_len;	/* Ethernet + IP + tcp/udp hdrs */
142 	__virtio16 gso_size;	/* Bytes to append to hdr_len per frame */
143 	union {
144 		struct {
145 			__virtio16 csum_start;
146 			__virtio16 csum_offset;
147 		};
148 		/* Checksum calculation */
149 		struct {
150 			/* Position to start checksumming from */
151 			__virtio16 start;
152 			/* Offset after that to place checksum */
153 			__virtio16 offset;
154 		} csum;
155 		/* Receive Segment Coalescing */
156 		struct {
157 			/* Number of coalesced segments */
158 			uint16_t segments;
159 			/* Number of duplicated acks */
160 			uint16_t dup_acks;
161 		} rsc;
162 	};
163 	__virtio16 num_buffers;	/* Number of merged rx buffers */
164 };
165 
166 struct virtio_net_hdr_v1_hash {
167 	struct virtio_net_hdr_v1 hdr;
168 	uint32_t hash_value;
169 #define VIRTIO_NET_HASH_REPORT_NONE            0
170 #define VIRTIO_NET_HASH_REPORT_IPv4            1
171 #define VIRTIO_NET_HASH_REPORT_TCPv4           2
172 #define VIRTIO_NET_HASH_REPORT_UDPv4           3
173 #define VIRTIO_NET_HASH_REPORT_IPv6            4
174 #define VIRTIO_NET_HASH_REPORT_TCPv6           5
175 #define VIRTIO_NET_HASH_REPORT_UDPv6           6
176 #define VIRTIO_NET_HASH_REPORT_IPv6_EX         7
177 #define VIRTIO_NET_HASH_REPORT_TCPv6_EX        8
178 #define VIRTIO_NET_HASH_REPORT_UDPv6_EX        9
179 	uint16_t hash_report;
180 	uint16_t padding;
181 };
182 
183 #ifndef VIRTIO_NET_NO_LEGACY
184 /* This header comes first in the scatter-gather list.
185  * For legacy virtio, if VIRTIO_F_ANY_LAYOUT is not negotiated, it must
186  * be the first element of the scatter-gather list.  If you don't
187  * specify GSO or CSUM features, you can simply ignore the header. */
188 struct virtio_net_hdr {
189 	/* See VIRTIO_NET_HDR_F_* */
190 	uint8_t flags;
191 	/* See VIRTIO_NET_HDR_GSO_* */
192 	uint8_t gso_type;
193 	__virtio16 hdr_len;		/* Ethernet + IP + tcp/udp hdrs */
194 	__virtio16 gso_size;		/* Bytes to append to hdr_len per frame */
195 	__virtio16 csum_start;	/* Position to start checksumming from */
196 	__virtio16 csum_offset;	/* Offset after that to place checksum */
197 };
198 
199 /* This is the version of the header to use when the MRG_RXBUF
200  * feature has been negotiated. */
201 struct virtio_net_hdr_mrg_rxbuf {
202 	struct virtio_net_hdr hdr;
203 	__virtio16 num_buffers;	/* Number of merged rx buffers */
204 };
205 #endif /* ...VIRTIO_NET_NO_LEGACY */
206 
207 /*
208  * Control virtqueue data structures
209  *
210  * The control virtqueue expects a header in the first sg entry
211  * and an ack/status response in the last entry.  Data for the
212  * command goes in between.
213  */
214 struct virtio_net_ctrl_hdr {
215 	uint8_t class;
216 	uint8_t cmd;
217 } QEMU_PACKED;
218 
219 typedef uint8_t virtio_net_ctrl_ack;
220 
221 #define VIRTIO_NET_OK     0
222 #define VIRTIO_NET_ERR    1
223 
224 /*
225  * Control the RX mode, ie. promisucous, allmulti, etc...
226  * All commands require an "out" sg entry containing a 1 byte
227  * state value, zero = disable, non-zero = enable.  Commands
228  * 0 and 1 are supported with the VIRTIO_NET_F_CTRL_RX feature.
229  * Commands 2-5 are added with VIRTIO_NET_F_CTRL_RX_EXTRA.
230  */
231 #define VIRTIO_NET_CTRL_RX    0
232  #define VIRTIO_NET_CTRL_RX_PROMISC      0
233  #define VIRTIO_NET_CTRL_RX_ALLMULTI     1
234  #define VIRTIO_NET_CTRL_RX_ALLUNI       2
235  #define VIRTIO_NET_CTRL_RX_NOMULTI      3
236  #define VIRTIO_NET_CTRL_RX_NOUNI        4
237  #define VIRTIO_NET_CTRL_RX_NOBCAST      5
238 
239 /*
240  * Control the MAC
241  *
242  * The MAC filter table is managed by the hypervisor, the guest should
243  * assume the size is infinite.  Filtering should be considered
244  * non-perfect, ie. based on hypervisor resources, the guest may
245  * received packets from sources not specified in the filter list.
246  *
247  * In addition to the class/cmd header, the TABLE_SET command requires
248  * two out scatterlists.  Each contains a 4 byte count of entries followed
249  * by a concatenated byte stream of the ETH_ALEN MAC addresses.  The
250  * first sg list contains unicast addresses, the second is for multicast.
251  * This functionality is present if the VIRTIO_NET_F_CTRL_RX feature
252  * is available.
253  *
254  * The ADDR_SET command requests one out scatterlist, it contains a
255  * 6 bytes MAC address. This functionality is present if the
256  * VIRTIO_NET_F_CTRL_MAC_ADDR feature is available.
257  */
258 struct virtio_net_ctrl_mac {
259 	__virtio32 entries;
260 	uint8_t macs[][ETH_ALEN];
261 } QEMU_PACKED;
262 
263 #define VIRTIO_NET_CTRL_MAC    1
264  #define VIRTIO_NET_CTRL_MAC_TABLE_SET        0
265  #define VIRTIO_NET_CTRL_MAC_ADDR_SET         1
266 
267 /*
268  * Control VLAN filtering
269  *
270  * The VLAN filter table is controlled via a simple ADD/DEL interface.
271  * VLAN IDs not added may be filterd by the hypervisor.  Del is the
272  * opposite of add.  Both commands expect an out entry containing a 2
273  * byte VLAN ID.  VLAN filterting is available with the
274  * VIRTIO_NET_F_CTRL_VLAN feature bit.
275  */
276 #define VIRTIO_NET_CTRL_VLAN       2
277  #define VIRTIO_NET_CTRL_VLAN_ADD             0
278  #define VIRTIO_NET_CTRL_VLAN_DEL             1
279 
280 /*
281  * Control link announce acknowledgement
282  *
283  * The command VIRTIO_NET_CTRL_ANNOUNCE_ACK is used to indicate that
284  * driver has recevied the notification; device would clear the
285  * VIRTIO_NET_S_ANNOUNCE bit in the status field after it receives
286  * this command.
287  */
288 #define VIRTIO_NET_CTRL_ANNOUNCE       3
289  #define VIRTIO_NET_CTRL_ANNOUNCE_ACK         0
290 
291 /*
292  * Control Receive Flow Steering
293  */
294 #define VIRTIO_NET_CTRL_MQ   4
295 /*
296  * The command VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET
297  * enables Receive Flow Steering, specifying the number of the transmit and
298  * receive queues that will be used. After the command is consumed and acked by
299  * the device, the device will not steer new packets on receive virtqueues
300  * other than specified nor read from transmit virtqueues other than specified.
301  * Accordingly, driver should not transmit new packets  on virtqueues other than
302  * specified.
303  */
304 struct virtio_net_ctrl_mq {
305 	__virtio16 virtqueue_pairs;
306 };
307 
308  #define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET        0
309  #define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MIN        1
310  #define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MAX        0x8000
311 
312 /*
313  * The command VIRTIO_NET_CTRL_MQ_RSS_CONFIG has the same effect as
314  * VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET does and additionally configures
315  * the receive steering to use a hash calculated for incoming packet
316  * to decide on receive virtqueue to place the packet. The command
317  * also provides parameters to calculate a hash and receive virtqueue.
318  */
319 struct virtio_net_rss_config {
320 	uint32_t hash_types;
321 	uint16_t indirection_table_mask;
322 	uint16_t unclassified_queue;
323 	uint16_t indirection_table[1/* + indirection_table_mask */];
324 	uint16_t max_tx_vq;
325 	uint8_t hash_key_length;
326 	uint8_t hash_key_data[/* hash_key_length */];
327 };
328 
329  #define VIRTIO_NET_CTRL_MQ_RSS_CONFIG          1
330 
331 /*
332  * The command VIRTIO_NET_CTRL_MQ_HASH_CONFIG requests the device
333  * to include in the virtio header of the packet the value of the
334  * calculated hash and the report type of hash. It also provides
335  * parameters for hash calculation. The command requires feature
336  * VIRTIO_NET_F_HASH_REPORT to be negotiated to extend the
337  * layout of virtio header as defined in virtio_net_hdr_v1_hash.
338  */
339 struct virtio_net_hash_config {
340 	uint32_t hash_types;
341 	/* for compatibility with virtio_net_rss_config */
342 	uint16_t reserved[4];
343 	uint8_t hash_key_length;
344 	uint8_t hash_key_data[/* hash_key_length */];
345 };
346 
347  #define VIRTIO_NET_CTRL_MQ_HASH_CONFIG         2
348 
349 /*
350  * Control network offloads
351  *
352  * Reconfigures the network offloads that Guest can handle.
353  *
354  * Available with the VIRTIO_NET_F_CTRL_GUEST_OFFLOADS feature bit.
355  *
356  * Command data format matches the feature bit mask exactly.
357  *
358  * See VIRTIO_NET_F_GUEST_* for the list of offloads
359  * that can be enabled/disabled.
360  */
361 #define VIRTIO_NET_CTRL_GUEST_OFFLOADS   5
362 #define VIRTIO_NET_CTRL_GUEST_OFFLOADS_SET        0
363 
364 /*
365  * Control notifications coalescing.
366  *
367  * Request the device to change the notifications coalescing parameters.
368  *
369  * Available with the VIRTIO_NET_F_NOTF_COAL feature bit.
370  */
371 #define VIRTIO_NET_CTRL_NOTF_COAL		6
372 /*
373  * Set the tx-usecs/tx-max-packets parameters.
374  */
375 struct virtio_net_ctrl_coal_tx {
376 	/* Maximum number of packets to send before a TX notification */
377 	uint32_t tx_max_packets;
378 	/* Maximum number of usecs to delay a TX notification */
379 	uint32_t tx_usecs;
380 };
381 
382 #define VIRTIO_NET_CTRL_NOTF_COAL_TX_SET		0
383 
384 /*
385  * Set the rx-usecs/rx-max-packets parameters.
386  */
387 struct virtio_net_ctrl_coal_rx {
388 	/* Maximum number of packets to receive before a RX notification */
389 	uint32_t rx_max_packets;
390 	/* Maximum number of usecs to delay a RX notification */
391 	uint32_t rx_usecs;
392 };
393 
394 #define VIRTIO_NET_CTRL_NOTF_COAL_RX_SET		1
395 #define VIRTIO_NET_CTRL_NOTF_COAL_VQ_SET		2
396 #define VIRTIO_NET_CTRL_NOTF_COAL_VQ_GET		3
397 
398 struct virtio_net_ctrl_coal {
399 	uint32_t max_packets;
400 	uint32_t max_usecs;
401 };
402 
403 struct  virtio_net_ctrl_coal_vq {
404 	uint16_t vqn;
405 	uint16_t reserved;
406 	struct virtio_net_ctrl_coal coal;
407 };
408 
409 #endif /* _LINUX_VIRTIO_NET_H */
410