1 /* 2 * VFIO API definition 3 * 4 * Copyright (C) 2012 Red Hat, Inc. All rights reserved. 5 * Author: Alex Williamson <alex.williamson@redhat.com> 6 * 7 * This program is free software; you can redistribute it and/or modify 8 * it under the terms of the GNU General Public License version 2 as 9 * published by the Free Software Foundation. 10 */ 11 #ifndef VFIO_H 12 #define VFIO_H 13 14 #include <linux/types.h> 15 #include <linux/ioctl.h> 16 17 #define VFIO_API_VERSION 0 18 19 20 /* Kernel & User level defines for VFIO IOCTLs. */ 21 22 /* Extensions */ 23 24 #define VFIO_TYPE1_IOMMU 1 25 #define VFIO_SPAPR_TCE_IOMMU 2 26 #define VFIO_TYPE1v2_IOMMU 3 27 /* 28 * IOMMU enforces DMA cache coherence (ex. PCIe NoSnoop stripping). This 29 * capability is subject to change as groups are added or removed. 30 */ 31 #define VFIO_DMA_CC_IOMMU 4 32 33 /* Check if EEH is supported */ 34 #define VFIO_EEH 5 35 36 /* Two-stage IOMMU */ 37 #define VFIO_TYPE1_NESTING_IOMMU 6 /* Implies v2 */ 38 39 #define VFIO_SPAPR_TCE_v2_IOMMU 7 40 41 /* 42 * The No-IOMMU IOMMU offers no translation or isolation for devices and 43 * supports no ioctls outside of VFIO_CHECK_EXTENSION. Use of VFIO's No-IOMMU 44 * code will taint the host kernel and should be used with extreme caution. 45 */ 46 #define VFIO_NOIOMMU_IOMMU 8 47 48 /* 49 * The IOCTL interface is designed for extensibility by embedding the 50 * structure length (argsz) and flags into structures passed between 51 * kernel and userspace. We therefore use the _IO() macro for these 52 * defines to avoid implicitly embedding a size into the ioctl request. 53 * As structure fields are added, argsz will increase to match and flag 54 * bits will be defined to indicate additional fields with valid data. 55 * It's *always* the caller's responsibility to indicate the size of 56 * the structure passed by setting argsz appropriately. 57 */ 58 59 #define VFIO_TYPE (';') 60 #define VFIO_BASE 100 61 62 /* 63 * For extension of INFO ioctls, VFIO makes use of a capability chain 64 * designed after PCI/e capabilities. A flag bit indicates whether 65 * this capability chain is supported and a field defined in the fixed 66 * structure defines the offset of the first capability in the chain. 67 * This field is only valid when the corresponding bit in the flags 68 * bitmap is set. This offset field is relative to the start of the 69 * INFO buffer, as is the next field within each capability header. 70 * The id within the header is a shared address space per INFO ioctl, 71 * while the version field is specific to the capability id. The 72 * contents following the header are specific to the capability id. 73 */ 74 struct vfio_info_cap_header { 75 __u16 id; /* Identifies capability */ 76 __u16 version; /* Version specific to the capability ID */ 77 __u32 next; /* Offset of next capability */ 78 }; 79 80 /* 81 * Callers of INFO ioctls passing insufficiently sized buffers will see 82 * the capability chain flag bit set, a zero value for the first capability 83 * offset (if available within the provided argsz), and argsz will be 84 * updated to report the necessary buffer size. For compatibility, the 85 * INFO ioctl will not report error in this case, but the capability chain 86 * will not be available. 87 */ 88 89 /* -------- IOCTLs for VFIO file descriptor (/dev/vfio/vfio) -------- */ 90 91 /** 92 * VFIO_GET_API_VERSION - _IO(VFIO_TYPE, VFIO_BASE + 0) 93 * 94 * Report the version of the VFIO API. This allows us to bump the entire 95 * API version should we later need to add or change features in incompatible 96 * ways. 97 * Return: VFIO_API_VERSION 98 * Availability: Always 99 */ 100 #define VFIO_GET_API_VERSION _IO(VFIO_TYPE, VFIO_BASE + 0) 101 102 /** 103 * VFIO_CHECK_EXTENSION - _IOW(VFIO_TYPE, VFIO_BASE + 1, __u32) 104 * 105 * Check whether an extension is supported. 106 * Return: 0 if not supported, 1 (or some other positive integer) if supported. 107 * Availability: Always 108 */ 109 #define VFIO_CHECK_EXTENSION _IO(VFIO_TYPE, VFIO_BASE + 1) 110 111 /** 112 * VFIO_SET_IOMMU - _IOW(VFIO_TYPE, VFIO_BASE + 2, __s32) 113 * 114 * Set the iommu to the given type. The type must be supported by an 115 * iommu driver as verified by calling CHECK_EXTENSION using the same 116 * type. A group must be set to this file descriptor before this 117 * ioctl is available. The IOMMU interfaces enabled by this call are 118 * specific to the value set. 119 * Return: 0 on success, -errno on failure 120 * Availability: When VFIO group attached 121 */ 122 #define VFIO_SET_IOMMU _IO(VFIO_TYPE, VFIO_BASE + 2) 123 124 /* -------- IOCTLs for GROUP file descriptors (/dev/vfio/$GROUP) -------- */ 125 126 /** 127 * VFIO_GROUP_GET_STATUS - _IOR(VFIO_TYPE, VFIO_BASE + 3, 128 * struct vfio_group_status) 129 * 130 * Retrieve information about the group. Fills in provided 131 * struct vfio_group_info. Caller sets argsz. 132 * Return: 0 on succes, -errno on failure. 133 * Availability: Always 134 */ 135 struct vfio_group_status { 136 __u32 argsz; 137 __u32 flags; 138 #define VFIO_GROUP_FLAGS_VIABLE (1 << 0) 139 #define VFIO_GROUP_FLAGS_CONTAINER_SET (1 << 1) 140 }; 141 #define VFIO_GROUP_GET_STATUS _IO(VFIO_TYPE, VFIO_BASE + 3) 142 143 /** 144 * VFIO_GROUP_SET_CONTAINER - _IOW(VFIO_TYPE, VFIO_BASE + 4, __s32) 145 * 146 * Set the container for the VFIO group to the open VFIO file 147 * descriptor provided. Groups may only belong to a single 148 * container. Containers may, at their discretion, support multiple 149 * groups. Only when a container is set are all of the interfaces 150 * of the VFIO file descriptor and the VFIO group file descriptor 151 * available to the user. 152 * Return: 0 on success, -errno on failure. 153 * Availability: Always 154 */ 155 #define VFIO_GROUP_SET_CONTAINER _IO(VFIO_TYPE, VFIO_BASE + 4) 156 157 /** 158 * VFIO_GROUP_UNSET_CONTAINER - _IO(VFIO_TYPE, VFIO_BASE + 5) 159 * 160 * Remove the group from the attached container. This is the 161 * opposite of the SET_CONTAINER call and returns the group to 162 * an initial state. All device file descriptors must be released 163 * prior to calling this interface. When removing the last group 164 * from a container, the IOMMU will be disabled and all state lost, 165 * effectively also returning the VFIO file descriptor to an initial 166 * state. 167 * Return: 0 on success, -errno on failure. 168 * Availability: When attached to container 169 */ 170 #define VFIO_GROUP_UNSET_CONTAINER _IO(VFIO_TYPE, VFIO_BASE + 5) 171 172 /** 173 * VFIO_GROUP_GET_DEVICE_FD - _IOW(VFIO_TYPE, VFIO_BASE + 6, char) 174 * 175 * Return a new file descriptor for the device object described by 176 * the provided string. The string should match a device listed in 177 * the devices subdirectory of the IOMMU group sysfs entry. The 178 * group containing the device must already be added to this context. 179 * Return: new file descriptor on success, -errno on failure. 180 * Availability: When attached to container 181 */ 182 #define VFIO_GROUP_GET_DEVICE_FD _IO(VFIO_TYPE, VFIO_BASE + 6) 183 184 /* --------------- IOCTLs for DEVICE file descriptors --------------- */ 185 186 /** 187 * VFIO_DEVICE_GET_INFO - _IOR(VFIO_TYPE, VFIO_BASE + 7, 188 * struct vfio_device_info) 189 * 190 * Retrieve information about the device. Fills in provided 191 * struct vfio_device_info. Caller sets argsz. 192 * Return: 0 on success, -errno on failure. 193 */ 194 struct vfio_device_info { 195 __u32 argsz; 196 __u32 flags; 197 #define VFIO_DEVICE_FLAGS_RESET (1 << 0) /* Device supports reset */ 198 #define VFIO_DEVICE_FLAGS_PCI (1 << 1) /* vfio-pci device */ 199 #define VFIO_DEVICE_FLAGS_PLATFORM (1 << 2) /* vfio-platform device */ 200 #define VFIO_DEVICE_FLAGS_AMBA (1 << 3) /* vfio-amba device */ 201 __u32 num_regions; /* Max region index + 1 */ 202 __u32 num_irqs; /* Max IRQ index + 1 */ 203 }; 204 #define VFIO_DEVICE_GET_INFO _IO(VFIO_TYPE, VFIO_BASE + 7) 205 206 /* 207 * Vendor driver using Mediated device framework should provide device_api 208 * attribute in supported type attribute groups. Device API string should be one 209 * of the following corresponding to device flags in vfio_device_info structure. 210 */ 211 212 #define VFIO_DEVICE_API_PCI_STRING "vfio-pci" 213 #define VFIO_DEVICE_API_PLATFORM_STRING "vfio-platform" 214 #define VFIO_DEVICE_API_AMBA_STRING "vfio-amba" 215 216 /** 217 * VFIO_DEVICE_GET_REGION_INFO - _IOWR(VFIO_TYPE, VFIO_BASE + 8, 218 * struct vfio_region_info) 219 * 220 * Retrieve information about a device region. Caller provides 221 * struct vfio_region_info with index value set. Caller sets argsz. 222 * Implementation of region mapping is bus driver specific. This is 223 * intended to describe MMIO, I/O port, as well as bus specific 224 * regions (ex. PCI config space). Zero sized regions may be used 225 * to describe unimplemented regions (ex. unimplemented PCI BARs). 226 * Return: 0 on success, -errno on failure. 227 */ 228 struct vfio_region_info { 229 __u32 argsz; 230 __u32 flags; 231 #define VFIO_REGION_INFO_FLAG_READ (1 << 0) /* Region supports read */ 232 #define VFIO_REGION_INFO_FLAG_WRITE (1 << 1) /* Region supports write */ 233 #define VFIO_REGION_INFO_FLAG_MMAP (1 << 2) /* Region supports mmap */ 234 #define VFIO_REGION_INFO_FLAG_CAPS (1 << 3) /* Info supports caps */ 235 __u32 index; /* Region index */ 236 __u32 cap_offset; /* Offset within info struct of first cap */ 237 __u64 size; /* Region size (bytes) */ 238 __u64 offset; /* Region offset from start of device fd */ 239 }; 240 #define VFIO_DEVICE_GET_REGION_INFO _IO(VFIO_TYPE, VFIO_BASE + 8) 241 242 /* 243 * The sparse mmap capability allows finer granularity of specifying areas 244 * within a region with mmap support. When specified, the user should only 245 * mmap the offset ranges specified by the areas array. mmaps outside of the 246 * areas specified may fail (such as the range covering a PCI MSI-X table) or 247 * may result in improper device behavior. 248 * 249 * The structures below define version 1 of this capability. 250 */ 251 #define VFIO_REGION_INFO_CAP_SPARSE_MMAP 1 252 253 struct vfio_region_sparse_mmap_area { 254 __u64 offset; /* Offset of mmap'able area within region */ 255 __u64 size; /* Size of mmap'able area */ 256 }; 257 258 struct vfio_region_info_cap_sparse_mmap { 259 struct vfio_info_cap_header header; 260 __u32 nr_areas; 261 __u32 reserved; 262 struct vfio_region_sparse_mmap_area areas[]; 263 }; 264 265 /* 266 * The device specific type capability allows regions unique to a specific 267 * device or class of devices to be exposed. This helps solve the problem for 268 * vfio bus drivers of defining which region indexes correspond to which region 269 * on the device, without needing to resort to static indexes, as done by 270 * vfio-pci. For instance, if we were to go back in time, we might remove 271 * VFIO_PCI_VGA_REGION_INDEX and let vfio-pci simply define that all indexes 272 * greater than or equal to VFIO_PCI_NUM_REGIONS are device specific and we'd 273 * make a "VGA" device specific type to describe the VGA access space. This 274 * means that non-VGA devices wouldn't need to waste this index, and thus the 275 * address space associated with it due to implementation of device file 276 * descriptor offsets in vfio-pci. 277 * 278 * The current implementation is now part of the user ABI, so we can't use this 279 * for VGA, but there are other upcoming use cases, such as opregions for Intel 280 * IGD devices and framebuffers for vGPU devices. We missed VGA, but we'll 281 * use this for future additions. 282 * 283 * The structure below defines version 1 of this capability. 284 */ 285 #define VFIO_REGION_INFO_CAP_TYPE 2 286 287 struct vfio_region_info_cap_type { 288 struct vfio_info_cap_header header; 289 __u32 type; /* global per bus driver */ 290 __u32 subtype; /* type specific */ 291 }; 292 293 #define VFIO_REGION_TYPE_PCI_VENDOR_TYPE (1 << 31) 294 #define VFIO_REGION_TYPE_PCI_VENDOR_MASK (0xffff) 295 296 /* 8086 Vendor sub-types */ 297 #define VFIO_REGION_SUBTYPE_INTEL_IGD_OPREGION (1) 298 #define VFIO_REGION_SUBTYPE_INTEL_IGD_HOST_CFG (2) 299 #define VFIO_REGION_SUBTYPE_INTEL_IGD_LPC_CFG (3) 300 301 /** 302 * VFIO_DEVICE_GET_IRQ_INFO - _IOWR(VFIO_TYPE, VFIO_BASE + 9, 303 * struct vfio_irq_info) 304 * 305 * Retrieve information about a device IRQ. Caller provides 306 * struct vfio_irq_info with index value set. Caller sets argsz. 307 * Implementation of IRQ mapping is bus driver specific. Indexes 308 * using multiple IRQs are primarily intended to support MSI-like 309 * interrupt blocks. Zero count irq blocks may be used to describe 310 * unimplemented interrupt types. 311 * 312 * The EVENTFD flag indicates the interrupt index supports eventfd based 313 * signaling. 314 * 315 * The MASKABLE flags indicates the index supports MASK and UNMASK 316 * actions described below. 317 * 318 * AUTOMASKED indicates that after signaling, the interrupt line is 319 * automatically masked by VFIO and the user needs to unmask the line 320 * to receive new interrupts. This is primarily intended to distinguish 321 * level triggered interrupts. 322 * 323 * The NORESIZE flag indicates that the interrupt lines within the index 324 * are setup as a set and new subindexes cannot be enabled without first 325 * disabling the entire index. This is used for interrupts like PCI MSI 326 * and MSI-X where the driver may only use a subset of the available 327 * indexes, but VFIO needs to enable a specific number of vectors 328 * upfront. In the case of MSI-X, where the user can enable MSI-X and 329 * then add and unmask vectors, it's up to userspace to make the decision 330 * whether to allocate the maximum supported number of vectors or tear 331 * down setup and incrementally increase the vectors as each is enabled. 332 */ 333 struct vfio_irq_info { 334 __u32 argsz; 335 __u32 flags; 336 #define VFIO_IRQ_INFO_EVENTFD (1 << 0) 337 #define VFIO_IRQ_INFO_MASKABLE (1 << 1) 338 #define VFIO_IRQ_INFO_AUTOMASKED (1 << 2) 339 #define VFIO_IRQ_INFO_NORESIZE (1 << 3) 340 __u32 index; /* IRQ index */ 341 __u32 count; /* Number of IRQs within this index */ 342 }; 343 #define VFIO_DEVICE_GET_IRQ_INFO _IO(VFIO_TYPE, VFIO_BASE + 9) 344 345 /** 346 * VFIO_DEVICE_SET_IRQS - _IOW(VFIO_TYPE, VFIO_BASE + 10, struct vfio_irq_set) 347 * 348 * Set signaling, masking, and unmasking of interrupts. Caller provides 349 * struct vfio_irq_set with all fields set. 'start' and 'count' indicate 350 * the range of subindexes being specified. 351 * 352 * The DATA flags specify the type of data provided. If DATA_NONE, the 353 * operation performs the specified action immediately on the specified 354 * interrupt(s). For example, to unmask AUTOMASKED interrupt [0,0]: 355 * flags = (DATA_NONE|ACTION_UNMASK), index = 0, start = 0, count = 1. 356 * 357 * DATA_BOOL allows sparse support for the same on arrays of interrupts. 358 * For example, to mask interrupts [0,1] and [0,3] (but not [0,2]): 359 * flags = (DATA_BOOL|ACTION_MASK), index = 0, start = 1, count = 3, 360 * data = {1,0,1} 361 * 362 * DATA_EVENTFD binds the specified ACTION to the provided __s32 eventfd. 363 * A value of -1 can be used to either de-assign interrupts if already 364 * assigned or skip un-assigned interrupts. For example, to set an eventfd 365 * to be trigger for interrupts [0,0] and [0,2]: 366 * flags = (DATA_EVENTFD|ACTION_TRIGGER), index = 0, start = 0, count = 3, 367 * data = {fd1, -1, fd2} 368 * If index [0,1] is previously set, two count = 1 ioctls calls would be 369 * required to set [0,0] and [0,2] without changing [0,1]. 370 * 371 * Once a signaling mechanism is set, DATA_BOOL or DATA_NONE can be used 372 * with ACTION_TRIGGER to perform kernel level interrupt loopback testing 373 * from userspace (ie. simulate hardware triggering). 374 * 375 * Setting of an event triggering mechanism to userspace for ACTION_TRIGGER 376 * enables the interrupt index for the device. Individual subindex interrupts 377 * can be disabled using the -1 value for DATA_EVENTFD or the index can be 378 * disabled as a whole with: flags = (DATA_NONE|ACTION_TRIGGER), count = 0. 379 * 380 * Note that ACTION_[UN]MASK specify user->kernel signaling (irqfds) while 381 * ACTION_TRIGGER specifies kernel->user signaling. 382 */ 383 struct vfio_irq_set { 384 __u32 argsz; 385 __u32 flags; 386 #define VFIO_IRQ_SET_DATA_NONE (1 << 0) /* Data not present */ 387 #define VFIO_IRQ_SET_DATA_BOOL (1 << 1) /* Data is bool (u8) */ 388 #define VFIO_IRQ_SET_DATA_EVENTFD (1 << 2) /* Data is eventfd (s32) */ 389 #define VFIO_IRQ_SET_ACTION_MASK (1 << 3) /* Mask interrupt */ 390 #define VFIO_IRQ_SET_ACTION_UNMASK (1 << 4) /* Unmask interrupt */ 391 #define VFIO_IRQ_SET_ACTION_TRIGGER (1 << 5) /* Trigger interrupt */ 392 __u32 index; 393 __u32 start; 394 __u32 count; 395 __u8 data[]; 396 }; 397 #define VFIO_DEVICE_SET_IRQS _IO(VFIO_TYPE, VFIO_BASE + 10) 398 399 #define VFIO_IRQ_SET_DATA_TYPE_MASK (VFIO_IRQ_SET_DATA_NONE | \ 400 VFIO_IRQ_SET_DATA_BOOL | \ 401 VFIO_IRQ_SET_DATA_EVENTFD) 402 #define VFIO_IRQ_SET_ACTION_TYPE_MASK (VFIO_IRQ_SET_ACTION_MASK | \ 403 VFIO_IRQ_SET_ACTION_UNMASK | \ 404 VFIO_IRQ_SET_ACTION_TRIGGER) 405 /** 406 * VFIO_DEVICE_RESET - _IO(VFIO_TYPE, VFIO_BASE + 11) 407 * 408 * Reset a device. 409 */ 410 #define VFIO_DEVICE_RESET _IO(VFIO_TYPE, VFIO_BASE + 11) 411 412 /* 413 * The VFIO-PCI bus driver makes use of the following fixed region and 414 * IRQ index mapping. Unimplemented regions return a size of zero. 415 * Unimplemented IRQ types return a count of zero. 416 */ 417 418 enum { 419 VFIO_PCI_BAR0_REGION_INDEX, 420 VFIO_PCI_BAR1_REGION_INDEX, 421 VFIO_PCI_BAR2_REGION_INDEX, 422 VFIO_PCI_BAR3_REGION_INDEX, 423 VFIO_PCI_BAR4_REGION_INDEX, 424 VFIO_PCI_BAR5_REGION_INDEX, 425 VFIO_PCI_ROM_REGION_INDEX, 426 VFIO_PCI_CONFIG_REGION_INDEX, 427 /* 428 * Expose VGA regions defined for PCI base class 03, subclass 00. 429 * This includes I/O port ranges 0x3b0 to 0x3bb and 0x3c0 to 0x3df 430 * as well as the MMIO range 0xa0000 to 0xbffff. Each implemented 431 * range is found at it's identity mapped offset from the region 432 * offset, for example 0x3b0 is region_info.offset + 0x3b0. Areas 433 * between described ranges are unimplemented. 434 */ 435 VFIO_PCI_VGA_REGION_INDEX, 436 VFIO_PCI_NUM_REGIONS = 9 /* Fixed user ABI, region indexes >=9 use */ 437 /* device specific cap to define content. */ 438 }; 439 440 enum { 441 VFIO_PCI_INTX_IRQ_INDEX, 442 VFIO_PCI_MSI_IRQ_INDEX, 443 VFIO_PCI_MSIX_IRQ_INDEX, 444 VFIO_PCI_ERR_IRQ_INDEX, 445 VFIO_PCI_REQ_IRQ_INDEX, 446 VFIO_PCI_NUM_IRQS 447 }; 448 449 /** 450 * VFIO_DEVICE_GET_PCI_HOT_RESET_INFO - _IORW(VFIO_TYPE, VFIO_BASE + 12, 451 * struct vfio_pci_hot_reset_info) 452 * 453 * Return: 0 on success, -errno on failure: 454 * -enospc = insufficient buffer, -enodev = unsupported for device. 455 */ 456 struct vfio_pci_dependent_device { 457 __u32 group_id; 458 __u16 segment; 459 __u8 bus; 460 __u8 devfn; /* Use PCI_SLOT/PCI_FUNC */ 461 }; 462 463 struct vfio_pci_hot_reset_info { 464 __u32 argsz; 465 __u32 flags; 466 __u32 count; 467 struct vfio_pci_dependent_device devices[]; 468 }; 469 470 #define VFIO_DEVICE_GET_PCI_HOT_RESET_INFO _IO(VFIO_TYPE, VFIO_BASE + 12) 471 472 /** 473 * VFIO_DEVICE_PCI_HOT_RESET - _IOW(VFIO_TYPE, VFIO_BASE + 13, 474 * struct vfio_pci_hot_reset) 475 * 476 * Return: 0 on success, -errno on failure. 477 */ 478 struct vfio_pci_hot_reset { 479 __u32 argsz; 480 __u32 flags; 481 __u32 count; 482 __s32 group_fds[]; 483 }; 484 485 #define VFIO_DEVICE_PCI_HOT_RESET _IO(VFIO_TYPE, VFIO_BASE + 13) 486 487 /* -------- API for Type1 VFIO IOMMU -------- */ 488 489 /** 490 * VFIO_IOMMU_GET_INFO - _IOR(VFIO_TYPE, VFIO_BASE + 12, struct vfio_iommu_info) 491 * 492 * Retrieve information about the IOMMU object. Fills in provided 493 * struct vfio_iommu_info. Caller sets argsz. 494 * 495 * XXX Should we do these by CHECK_EXTENSION too? 496 */ 497 struct vfio_iommu_type1_info { 498 __u32 argsz; 499 __u32 flags; 500 #define VFIO_IOMMU_INFO_PGSIZES (1 << 0) /* supported page sizes info */ 501 __u64 iova_pgsizes; /* Bitmap of supported page sizes */ 502 }; 503 504 #define VFIO_IOMMU_GET_INFO _IO(VFIO_TYPE, VFIO_BASE + 12) 505 506 /** 507 * VFIO_IOMMU_MAP_DMA - _IOW(VFIO_TYPE, VFIO_BASE + 13, struct vfio_dma_map) 508 * 509 * Map process virtual addresses to IO virtual addresses using the 510 * provided struct vfio_dma_map. Caller sets argsz. READ &/ WRITE required. 511 */ 512 struct vfio_iommu_type1_dma_map { 513 __u32 argsz; 514 __u32 flags; 515 #define VFIO_DMA_MAP_FLAG_READ (1 << 0) /* readable from device */ 516 #define VFIO_DMA_MAP_FLAG_WRITE (1 << 1) /* writable from device */ 517 __u64 vaddr; /* Process virtual address */ 518 __u64 iova; /* IO virtual address */ 519 __u64 size; /* Size of mapping (bytes) */ 520 }; 521 522 #define VFIO_IOMMU_MAP_DMA _IO(VFIO_TYPE, VFIO_BASE + 13) 523 524 /** 525 * VFIO_IOMMU_UNMAP_DMA - _IOWR(VFIO_TYPE, VFIO_BASE + 14, 526 * struct vfio_dma_unmap) 527 * 528 * Unmap IO virtual addresses using the provided struct vfio_dma_unmap. 529 * Caller sets argsz. The actual unmapped size is returned in the size 530 * field. No guarantee is made to the user that arbitrary unmaps of iova 531 * or size different from those used in the original mapping call will 532 * succeed. 533 */ 534 struct vfio_iommu_type1_dma_unmap { 535 __u32 argsz; 536 __u32 flags; 537 __u64 iova; /* IO virtual address */ 538 __u64 size; /* Size of mapping (bytes) */ 539 }; 540 541 #define VFIO_IOMMU_UNMAP_DMA _IO(VFIO_TYPE, VFIO_BASE + 14) 542 543 /* 544 * IOCTLs to enable/disable IOMMU container usage. 545 * No parameters are supported. 546 */ 547 #define VFIO_IOMMU_ENABLE _IO(VFIO_TYPE, VFIO_BASE + 15) 548 #define VFIO_IOMMU_DISABLE _IO(VFIO_TYPE, VFIO_BASE + 16) 549 550 /* -------- Additional API for SPAPR TCE (Server POWERPC) IOMMU -------- */ 551 552 /* 553 * The SPAPR TCE DDW info struct provides the information about 554 * the details of Dynamic DMA window capability. 555 * 556 * @pgsizes contains a page size bitmask, 4K/64K/16M are supported. 557 * @max_dynamic_windows_supported tells the maximum number of windows 558 * which the platform can create. 559 * @levels tells the maximum number of levels in multi-level IOMMU tables; 560 * this allows splitting a table into smaller chunks which reduces 561 * the amount of physically contiguous memory required for the table. 562 */ 563 struct vfio_iommu_spapr_tce_ddw_info { 564 __u64 pgsizes; /* Bitmap of supported page sizes */ 565 __u32 max_dynamic_windows_supported; 566 __u32 levels; 567 }; 568 569 /* 570 * The SPAPR TCE info struct provides the information about the PCI bus 571 * address ranges available for DMA, these values are programmed into 572 * the hardware so the guest has to know that information. 573 * 574 * The DMA 32 bit window start is an absolute PCI bus address. 575 * The IOVA address passed via map/unmap ioctls are absolute PCI bus 576 * addresses too so the window works as a filter rather than an offset 577 * for IOVA addresses. 578 * 579 * Flags supported: 580 * - VFIO_IOMMU_SPAPR_INFO_DDW: informs the userspace that dynamic DMA windows 581 * (DDW) support is present. @ddw is only supported when DDW is present. 582 */ 583 struct vfio_iommu_spapr_tce_info { 584 __u32 argsz; 585 __u32 flags; 586 #define VFIO_IOMMU_SPAPR_INFO_DDW (1 << 0) /* DDW supported */ 587 __u32 dma32_window_start; /* 32 bit window start (bytes) */ 588 __u32 dma32_window_size; /* 32 bit window size (bytes) */ 589 struct vfio_iommu_spapr_tce_ddw_info ddw; 590 }; 591 592 #define VFIO_IOMMU_SPAPR_TCE_GET_INFO _IO(VFIO_TYPE, VFIO_BASE + 12) 593 594 /* 595 * EEH PE operation struct provides ways to: 596 * - enable/disable EEH functionality; 597 * - unfreeze IO/DMA for frozen PE; 598 * - read PE state; 599 * - reset PE; 600 * - configure PE; 601 * - inject EEH error. 602 */ 603 struct vfio_eeh_pe_err { 604 __u32 type; 605 __u32 func; 606 __u64 addr; 607 __u64 mask; 608 }; 609 610 struct vfio_eeh_pe_op { 611 __u32 argsz; 612 __u32 flags; 613 __u32 op; 614 union { 615 struct vfio_eeh_pe_err err; 616 }; 617 }; 618 619 #define VFIO_EEH_PE_DISABLE 0 /* Disable EEH functionality */ 620 #define VFIO_EEH_PE_ENABLE 1 /* Enable EEH functionality */ 621 #define VFIO_EEH_PE_UNFREEZE_IO 2 /* Enable IO for frozen PE */ 622 #define VFIO_EEH_PE_UNFREEZE_DMA 3 /* Enable DMA for frozen PE */ 623 #define VFIO_EEH_PE_GET_STATE 4 /* PE state retrieval */ 624 #define VFIO_EEH_PE_STATE_NORMAL 0 /* PE in functional state */ 625 #define VFIO_EEH_PE_STATE_RESET 1 /* PE reset in progress */ 626 #define VFIO_EEH_PE_STATE_STOPPED 2 /* Stopped DMA and IO */ 627 #define VFIO_EEH_PE_STATE_STOPPED_DMA 4 /* Stopped DMA only */ 628 #define VFIO_EEH_PE_STATE_UNAVAIL 5 /* State unavailable */ 629 #define VFIO_EEH_PE_RESET_DEACTIVATE 5 /* Deassert PE reset */ 630 #define VFIO_EEH_PE_RESET_HOT 6 /* Assert hot reset */ 631 #define VFIO_EEH_PE_RESET_FUNDAMENTAL 7 /* Assert fundamental reset */ 632 #define VFIO_EEH_PE_CONFIGURE 8 /* PE configuration */ 633 #define VFIO_EEH_PE_INJECT_ERR 9 /* Inject EEH error */ 634 635 #define VFIO_EEH_PE_OP _IO(VFIO_TYPE, VFIO_BASE + 21) 636 637 /** 638 * VFIO_IOMMU_SPAPR_REGISTER_MEMORY - _IOW(VFIO_TYPE, VFIO_BASE + 17, struct vfio_iommu_spapr_register_memory) 639 * 640 * Registers user space memory where DMA is allowed. It pins 641 * user pages and does the locked memory accounting so 642 * subsequent VFIO_IOMMU_MAP_DMA/VFIO_IOMMU_UNMAP_DMA calls 643 * get faster. 644 */ 645 struct vfio_iommu_spapr_register_memory { 646 __u32 argsz; 647 __u32 flags; 648 __u64 vaddr; /* Process virtual address */ 649 __u64 size; /* Size of mapping (bytes) */ 650 }; 651 #define VFIO_IOMMU_SPAPR_REGISTER_MEMORY _IO(VFIO_TYPE, VFIO_BASE + 17) 652 653 /** 654 * VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - _IOW(VFIO_TYPE, VFIO_BASE + 18, struct vfio_iommu_spapr_register_memory) 655 * 656 * Unregisters user space memory registered with 657 * VFIO_IOMMU_SPAPR_REGISTER_MEMORY. 658 * Uses vfio_iommu_spapr_register_memory for parameters. 659 */ 660 #define VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY _IO(VFIO_TYPE, VFIO_BASE + 18) 661 662 /** 663 * VFIO_IOMMU_SPAPR_TCE_CREATE - _IOWR(VFIO_TYPE, VFIO_BASE + 19, struct vfio_iommu_spapr_tce_create) 664 * 665 * Creates an additional TCE table and programs it (sets a new DMA window) 666 * to every IOMMU group in the container. It receives page shift, window 667 * size and number of levels in the TCE table being created. 668 * 669 * It allocates and returns an offset on a PCI bus of the new DMA window. 670 */ 671 struct vfio_iommu_spapr_tce_create { 672 __u32 argsz; 673 __u32 flags; 674 /* in */ 675 __u32 page_shift; 676 __u32 __resv1; 677 __u64 window_size; 678 __u32 levels; 679 __u32 __resv2; 680 /* out */ 681 __u64 start_addr; 682 }; 683 #define VFIO_IOMMU_SPAPR_TCE_CREATE _IO(VFIO_TYPE, VFIO_BASE + 19) 684 685 /** 686 * VFIO_IOMMU_SPAPR_TCE_REMOVE - _IOW(VFIO_TYPE, VFIO_BASE + 20, struct vfio_iommu_spapr_tce_remove) 687 * 688 * Unprograms a TCE table from all groups in the container and destroys it. 689 * It receives a PCI bus offset as a window id. 690 */ 691 struct vfio_iommu_spapr_tce_remove { 692 __u32 argsz; 693 __u32 flags; 694 /* in */ 695 __u64 start_addr; 696 }; 697 #define VFIO_IOMMU_SPAPR_TCE_REMOVE _IO(VFIO_TYPE, VFIO_BASE + 20) 698 699 /* ***************************************************************** */ 700 701 #endif /* VFIO_H */ 702