1 /*
2  * Target definitions of errnos. These may be overridden by an
3  * architecture specific header if needed.
4  *
5  * Taken from asm-generic/errno-base.h and asm-generic/errno.h
6  */
7 
8 #ifndef GENERIC_TARGET_ERRNO_DEFS_H
9 #define GENERIC_TARGET_ERRNO_DEFS_H
10 
11 #define TARGET_EPERM            1      /* Operation not permitted */
12 #define TARGET_ENOENT           2      /* No such file or directory */
13 #define TARGET_ESRCH            3      /* No such process */
14 #define TARGET_EINTR            4      /* Interrupted system call */
15 #define TARGET_EIO              5      /* I/O error */
16 #define TARGET_ENXIO            6      /* No such device or address */
17 #define TARGET_E2BIG            7      /* Argument list too long */
18 #define TARGET_ENOEXEC          8      /* TARGET_Exec format error */
19 #define TARGET_EBADF            9      /* Bad file number */
20 #define TARGET_ECHILD          10      /* No child processes */
21 #define TARGET_EAGAIN          11      /* Try again */
22 #define TARGET_ENOMEM          12      /* Out of memory */
23 #define TARGET_EACCES          13      /* Permission denied */
24 #define TARGET_EFAULT          14      /* Bad address */
25 #define TARGET_ENOTBLK         15      /* Block device required */
26 #define TARGET_EBUSY           16      /* Device or resource busy */
27 #define TARGET_EEXIST          17      /* File exists */
28 #define TARGET_EXDEV           18      /* Cross-device link */
29 #define TARGET_ENODEV          19      /* No such device */
30 #define TARGET_ENOTDIR         20      /* Not a directory */
31 #define TARGET_EISDIR          21      /* Is a directory */
32 #define TARGET_EINVAL          22      /* Invalid argument */
33 #define TARGET_ENFILE          23      /* File table overflow */
34 #define TARGET_EMFILE          24      /* Too many open files */
35 #define TARGET_ENOTTY          25      /* Not a typewriter */
36 #define TARGET_ETXTBSY         26      /* Text file busy */
37 #define TARGET_EFBIG           27      /* File too large */
38 #define TARGET_ENOSPC          28      /* No space left on device */
39 #define TARGET_ESPIPE          29      /* Illegal seek */
40 #define TARGET_EROFS           30      /* Read-only file system */
41 #define TARGET_EMLINK          31      /* Too many links */
42 #define TARGET_EPIPE           32      /* Broken pipe */
43 #define TARGET_EDOM            33      /* Math argument out of domain of func */
44 #define TARGET_ERANGE          34      /* Math result not representable */
45 
46 #define TARGET_EDEADLK         35      /* Resource deadlock would occur */
47 #define TARGET_ENAMETOOLONG    36      /* File name too long */
48 #define TARGET_ENOLCK          37      /* No record locks available */
49 #define TARGET_ENOSYS          38      /* Function not implemented */
50 #define TARGET_ENOTEMPTY       39      /* Directory not empty */
51 #define TARGET_ELOOP           40      /* Too many symbolic links encountered */
52 
53 #define TARGET_ENOMSG          42      /* No message of desired type */
54 #define TARGET_EIDRM           43      /* Identifier removed */
55 #define TARGET_ECHRNG          44      /* Channel number out of range */
56 #define TARGET_EL2NSYNC        45      /* Level 2 not synchronized */
57 #define TARGET_EL3HLT          46      /* Level 3 halted */
58 #define TARGET_EL3RST          47      /* Level 3 reset */
59 #define TARGET_ELNRNG          48      /* Link number out of range */
60 #define TARGET_EUNATCH         49      /* Protocol driver not attached */
61 #define TARGET_ENOCSI          50      /* No CSI structure available */
62 #define TARGET_EL2HLT          51      /* Level 2 halted */
63 #define TARGET_EBADE           52      /* Invalid exchange */
64 #define TARGET_EBADR           53      /* Invalid request descriptor */
65 #define TARGET_EXFULL          54      /* TARGET_Exchange full */
66 #define TARGET_ENOANO          55      /* No anode */
67 #define TARGET_EBADRQC         56      /* Invalid request code */
68 #define TARGET_EBADSLT         57      /* Invalid slot */
69 
70 #define TARGET_EBFONT          59      /* Bad font file format */
71 #define TARGET_ENOSTR          60      /* Device not a stream */
72 #define TARGET_ENODATA         61      /* No data available */
73 #define TARGET_ETIME           62      /* Timer expired */
74 #define TARGET_ENOSR           63      /* Out of streams resources */
75 #define TARGET_ENONET          64      /* Machine is not on the network */
76 #define TARGET_ENOPKG          65      /* Package not installed */
77 #define TARGET_EREMOTE         66      /* Object is remote */
78 #define TARGET_ENOLINK         67      /* Link has been severed */
79 #define TARGET_EADV            68      /* Advertise error */
80 #define TARGET_ESRMNT          69      /* Srmount error */
81 #define TARGET_ECOMM           70      /* Communication error on send */
82 #define TARGET_EPROTO          71      /* Protocol error */
83 #define TARGET_EMULTIHOP       72      /* Multihop attempted */
84 #define TARGET_EDOTDOT         73      /* RFS specific error */
85 #define TARGET_EBADMSG         74      /* Not a data message */
86 #define TARGET_EOVERFLOW       75      /* Value too large for defined data type */
87 #define TARGET_ENOTUNIQ        76      /* Name not unique on network */
88 #define TARGET_EBADFD          77      /* File descriptor in bad state */
89 #define TARGET_EREMCHG         78      /* Remote address changed */
90 #define TARGET_ELIBACC         79      /* Can not access a needed shared library */
91 #define TARGET_ELIBBAD         80      /* Accessing a corrupted shared library */
92 #define TARGET_ELIBSCN         81      /* .lib section in a.out corrupted */
93 #define TARGET_ELIBMAX         82      /* Attempting to link in too many shared libraries */
94 #define TARGET_ELIBEXEC        83      /* Cannot exec a shared library directly */
95 #define TARGET_EILSEQ          84      /* Illegal byte sequence */
96 #define TARGET_ERESTART        85      /* Interrupted system call should be restarted */
97 #define TARGET_ESTRPIPE        86      /* Streams pipe error */
98 #define TARGET_EUSERS          87      /* Too many users */
99 #define TARGET_ENOTSOCK        88      /* Socket operation on non-socket */
100 #define TARGET_EDESTADDRREQ    89      /* Destination address required */
101 #define TARGET_EMSGSIZE        90      /* Message too long */
102 #define TARGET_EPROTOTYPE      91      /* Protocol wrong type for socket */
103 #define TARGET_ENOPROTOOPT     92      /* Protocol not available */
104 #define TARGET_EPROTONOSUPPORT 93      /* Protocol not supported */
105 #define TARGET_ESOCKTNOSUPPORT 94      /* Socket type not supported */
106 #define TARGET_EOPNOTSUPP      95      /* Operation not supported on transport endpoint */
107 #define TARGET_EPFNOSUPPORT    96      /* Protocol family not supported */
108 #define TARGET_EAFNOSUPPORT    97      /* Address family not supported by protocol */
109 #define TARGET_EADDRINUSE      98      /* Address already in use */
110 #define TARGET_EADDRNOTAVAIL   99      /* Cannot assign requested address */
111 #define TARGET_ENETDOWN        100     /* Network is down */
112 #define TARGET_ENETUNREACH     101     /* Network is unreachable */
113 #define TARGET_ENETRESET       102     /* Network dropped connection because of reset */
114 #define TARGET_ECONNABORTED    103     /* Software caused connection abort */
115 #define TARGET_ECONNRESET      104     /* Connection reset by peer */
116 #define TARGET_ENOBUFS         105     /* No buffer space available */
117 #define TARGET_EISCONN         106     /* Transport endpoint is already connected */
118 #define TARGET_ENOTCONN        107     /* Transport endpoint is not connected */
119 #define TARGET_ESHUTDOWN       108     /* Cannot send after transport endpoint shutdown */
120 #define TARGET_ETOOMANYREFS    109     /* Too many references: cannot splice */
121 #define TARGET_ETIMEDOUT       110     /* Connection timed out */
122 #define TARGET_ECONNREFUSED    111     /* Connection refused */
123 #define TARGET_EHOSTDOWN       112     /* Host is down */
124 #define TARGET_EHOSTUNREACH    113     /* No route to host */
125 #define TARGET_EALREADY        114     /* Operation already in progress */
126 #define TARGET_EINPROGRESS     115     /* Operation now in progress */
127 #define TARGET_ESTALE          116     /* Stale NFS file handle */
128 #define TARGET_EUCLEAN         117     /* Structure needs cleaning */
129 #define TARGET_ENOTNAM         118     /* Not a XENIX named type file */
130 #define TARGET_ENAVAIL         119     /* No XENIX semaphores available */
131 #define TARGET_EISNAM          120     /* Is a named type file */
132 #define TARGET_EREMOTEIO       121     /* Remote I/O error */
133 #define TARGET_EDQUOT          122     /* Quota exceeded */
134 
135 #define TARGET_ENOMEDIUM       123     /* No medium found */
136 #define TARGET_EMEDIUMTYPE     124     /* Wrong medium type */
137 #define TARGET_ECANCELED       125     /* Operation Canceled */
138 #define TARGET_ENOKEY          126     /* Required key not available */
139 #define TARGET_EKEYEXPIRED     127     /* Key has expired */
140 #define TARGET_EKEYREVOKED     128     /* Key has been revoked */
141 #define TARGET_EKEYREJECTED    129     /* Key was rejected by service */
142 
143 /* for robust mutexes */
144 #define TARGET_EOWNERDEAD      130     /* Owner died */
145 #define TARGET_ENOTRECOVERABLE 131     /* State not recoverable */
146 
147 #define TARGET_ERFKILL         132     /* Operation not possible due to RF-kill */
148 #define TARGET_EHWPOISON       133     /* Memory page has hardware error */
149 
150 /* QEMU internal, not visible to the guest. This is returned when a
151  * system call should be restarted, to tell the main loop that it
152  * should wind the guest PC backwards so it will re-execute the syscall
153  * after handling any pending signals. They match with the ones the guest
154  * kernel uses for the same purpose.
155  */
156 #define TARGET_ERESTARTSYS     512     /* Restart system call (if SA_RESTART) */
157 
158 /* QEMU internal, not visible to the guest. This is returned by the
159  * do_sigreturn() code after a successful sigreturn syscall, to indicate
160  * that it has correctly set the guest registers and so the main loop
161  * should not touch them. We use the value the guest would use for
162  * ERESTART_NOINTR (which is kernel internal) to guarantee that we won't
163  * clash with a valid guest errno now or in the future.
164  */
165 #define TARGET_QEMU_ESIGRETURN 513     /* Return from signal */
166 
167 #endif
168