1/*
2 * PROJECT:     ReactOS Mode Utility
3 * LICENSE:     GPL-2.0+ (https://spdx.org/licenses/GPL-2.0+)
4 * PURPOSE:     Chinese (Traditional) resource file
5 * TRANSLATORS: Copyright 2021 Chan Chilung <eason066@gmail.com>
6 */
7
8LANGUAGE LANG_CHINESE, SUBLANG_CHINESE_TRADITIONAL
9
10STRINGTABLE
11BEGIN
12    IDS_USAGE "設定系統裝置。\n\n\
13裝置狀態:      MODE [device] [/STATUS]\n\
14序列埠:        MODE COMm[:] [BAUD=b] [PARITY=p] [DATA=d] [STOP=s]\n\
15                            [to=on|off] [xon=on|off] [odsr=on|off]\n\
16                            [octs=on|off] [dtr=on|off|hs]\n\
17                            [rts=on|off|hs|tg] [idsr=on|off]\n\
18重新導向列印:  MODE LPTn[:]=COMm[:]\n\
19選取字碼頁:    MODE CON[:] CP SELECT=yyy\n\
20字碼頁狀態:    MODE CON[:] CP [/STATUS]\n\
21顯示模式:      MODE CON[:] [COLS=c] [LINES=n]\n\
22鍵盤速率:      MODE CON[:] [RATE=r DELAY=d]\n"
23
24    IDS_QUERY_SERIAL_FOUND "找到序列裝置 - %s\n"
25    IDS_QUERY_PRINTER_FOUND "找到印表機裝置 - %s\n"
26    IDS_QUERY_PARALLEL_FOUND "找到平行裝置 - %s\n"
27    IDS_QUERY_DOSDEV_FOUND "找到 DOS 裝置 - %s\n"
28    // IDS_QUERY_MISC_FOUND "Found other device - %s\n"
29
30    // IDS_QUERY_DEVICE_FOUND "Found %s device - %s\n"
31    // IDS_SERIAL  "serial"
32    // IDS_PRINTER "parallel"
33    // IDS_OTHER   "other"
34END
35
36STRINGTABLE
37BEGIN
38    IDS_DEVICE_STATUS_HEADER "裝置 %s 的狀態:"
39
40    IDS_COM_STATUS_BAUD             "    傳輸速率:      %ld\n"
41    IDS_COM_STATUS_PARITY           "    同位位元:      %s\n"
42    IDS_COM_STATUS_DATA_BITS        "    資料位元:      %d\n"
43    IDS_COM_STATUS_STOP_BITS        "    停止位元:      %s\n"
44    IDS_COM_STATUS_TIMEOUT          "    逾時:          %s\n"
45    IDS_COM_STATUS_XON_XOFF         "    XON/XOFF:      %s\n"
46    IDS_COM_STATUS_CTS_HANDSHAKING  "    CTS 交握:      %s\n"
47    IDS_COM_STATUS_DSR_HANDSHAKING  "    DSR 交握:      %s\n"
48    IDS_COM_STATUS_DSR_SENSITIVITY  "    DSR 敏感度:    %s\n"
49    IDS_COM_STATUS_DTR_CIRCUIT      "    DTR 電路:      %s\n"
50    IDS_COM_STATUS_RTS_CIRCUIT      "    RTS 電路:      %s\n"
51
52    IDS_CONSOLE_STATUS_LINES    "    行:           %d\n"
53    IDS_CONSOLE_STATUS_COLS     "    欄:           %d\n"
54    IDS_CONSOLE_KBD_RATE        "    鍵盤速率:     %ld\n"
55    IDS_CONSOLE_KBD_DELAY       "    鍵盤延遲:     %ld\n"
56    IDS_CONSOLE_CODEPAGE        "    字碼頁:       %d\n"
57
58    IDS_PRINTER_OUTPUT_NOT_REROUTED     "    印表機輸出尚未重新路由。\n"
59    IDS_PRINTER_OUTPUT_REROUTED_SERIAL  "    印表機輸出將重新路由到序列埠 %s。\n"
60END
61
62STRINGTABLE
63BEGIN
64    IDS_ERROR_QUERY_DEVICES "錯誤: 無法查詢 DOS 裝置 (0x%lx)。\n"
65    IDS_ERROR_QUERY_DEVICES_FORM "    QueryDosDeviceW(%s) 傳回了無法辨識的形態 %s。\n"
66    IDS_ERROR_SET_PARALLEL_STATE "錯誤: SetParallelState(%d) - DefineDosDevice(%s) (0x%lx)\n"
67    IDS_ERROR_INVALID_PARAMETER "無效的參數 - %s\n"
68    IDS_ERROR_ILLEGAL_DEVICE_NAME "不合法的裝置名稱 - %s (0x%lx)\n"
69    IDS_ERROR_DEVICE_NOT_AVAILABLE "裝置 %s 目前無法使用。\n"
70    IDS_ERROR_STATUS_GET_DEVICE "無法取得裝置 %s 的狀態:\n"
71    IDS_ERROR_STATUS_SET_DEVICE "無法設定裝置 %s 的狀態:\n"
72    IDS_ERROR_TIMEOUT_GET_DEVICE "無法取得裝置 %s 的逾時值:\n"
73    IDS_ERROR_TIMEOUT_SET_DEVICE "無法設定裝置 %s 的逾時值:\n"
74    IDS_ERROR_INVALID_PARITY_BITS "錯誤: 無效的同位位元值 %d:\n"
75    IDS_ERROR_INVALID_STOP_BITS "錯誤: 無效的停止位元值 %d:\n"
76    IDS_ERROR_NO_MEMORY "錯誤: 記憶體不足。\n"
77    IDS_ERROR_SCREEN_LINES_COL "螢幕無法設定為指定的行數和欄數。\n"
78    IDS_ERROR_INVALID_CODEPAGE "指定的字碼頁無效。\n"
79END
80