1 /******************************************************************************* 2 * 3 * Module Name: utstrtoul64 - String-to-integer conversion support for both 4 * 64-bit and 32-bit integers 5 * 6 ******************************************************************************/ 7 8 /* 9 * Copyright (C) 2000 - 2022, Intel Corp. 10 * All rights reserved. 11 * 12 * Redistribution and use in source and binary forms, with or without 13 * modification, are permitted provided that the following conditions 14 * are met: 15 * 1. Redistributions of source code must retain the above copyright 16 * notice, this list of conditions, and the following disclaimer, 17 * without modification. 18 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 19 * substantially similar to the "NO WARRANTY" disclaimer below 20 * ("Disclaimer") and any redistribution must be conditioned upon 21 * including a substantially similar Disclaimer requirement for further 22 * binary redistribution. 23 * 3. Neither the names of the above-listed copyright holders nor the names 24 * of any contributors may be used to endorse or promote products derived 25 * from this software without specific prior written permission. 26 * 27 * Alternatively, this software may be distributed under the terms of the 28 * GNU General Public License ("GPL") version 2 as published by the Free 29 * Software Foundation. 30 * 31 * NO WARRANTY 32 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 33 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 34 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 35 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 36 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 37 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 38 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 39 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 40 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 41 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 42 * POSSIBILITY OF SUCH DAMAGES. 43 */ 44 45 #include "acpi.h" 46 #include "accommon.h" 47 48 #define _COMPONENT ACPI_UTILITIES 49 ACPI_MODULE_NAME ("utstrtoul64") 50 51 52 /******************************************************************************* 53 * 54 * This module contains the top-level string to 64/32-bit unsigned integer 55 * conversion functions: 56 * 57 * 1) A standard strtoul() function that supports 64-bit integers, base 58 * 8/10/16, with integer overflow support. This is used mainly by the 59 * iASL compiler, which implements tighter constraints on integer 60 * constants than the runtime (interpreter) integer-to-string conversions. 61 * 2) Runtime "Explicit conversion" as defined in the ACPI specification. 62 * 3) Runtime "Implicit conversion" as defined in the ACPI specification. 63 * 64 * Current users of this module: 65 * 66 * iASL - Preprocessor (constants and math expressions) 67 * iASL - Main parser, conversion of constants to integers 68 * iASL - Data Table Compiler parser (constants and math expressions) 69 * Interpreter - Implicit and explicit conversions, GPE method names 70 * Interpreter - Repair code for return values from predefined names 71 * Debugger - Command line input string conversion 72 * AcpiDump - ACPI table physical addresses 73 * AcpiExec - Support for namespace overrides 74 * 75 * Notes concerning users of these interfaces: 76 * 77 * AcpiGbl_IntegerByteWidth is used to set the 32/64 bit limit for explicit 78 * and implicit conversions. This global must be set to the proper width. 79 * For the core ACPICA code, the width depends on the DSDT version. For the 80 * AcpiUtStrtoul64 interface, all conversions are 64 bits. This interface is 81 * used primarily for iASL, where the default width is 64 bits for all parsers, 82 * but error checking is performed later to flag cases where a 64-bit constant 83 * is wrongly defined in a 32-bit DSDT/SSDT. 84 * 85 * In ACPI, the only place where octal numbers are supported is within 86 * the ASL language itself. This is implemented via the main AcpiUtStrtoul64 87 * interface. According the ACPI specification, there is no ACPI runtime 88 * support (explicit/implicit) for octal string conversions. 89 * 90 ******************************************************************************/ 91 92 93 /******************************************************************************* 94 * 95 * FUNCTION: AcpiUtStrtoul64 96 * 97 * PARAMETERS: String - Null terminated input string, 98 * must be a valid pointer 99 * ReturnValue - Where the converted integer is 100 * returned. Must be a valid pointer 101 * 102 * RETURN: Status and converted integer. Returns an exception on a 103 * 64-bit numeric overflow 104 * 105 * DESCRIPTION: Convert a string into an unsigned integer. Always performs a 106 * full 64-bit conversion, regardless of the current global 107 * integer width. Supports Decimal, Hex, and Octal strings. 108 * 109 * Current users of this function: 110 * 111 * iASL - Preprocessor (constants and math expressions) 112 * iASL - Main ASL parser, conversion of ASL constants to integers 113 * iASL - Data Table Compiler parser (constants and math expressions) 114 * Interpreter - Repair code for return values from predefined names 115 * AcpiDump - ACPI table physical addresses 116 * AcpiExec - Support for namespace overrides 117 * 118 ******************************************************************************/ 119 120 ACPI_STATUS 121 AcpiUtStrtoul64 ( 122 char *String, 123 UINT64 *ReturnValue) 124 { 125 ACPI_STATUS Status = AE_OK; 126 UINT8 OriginalBitWidth; 127 UINT32 Base = 10; /* Default is decimal */ 128 129 130 ACPI_FUNCTION_TRACE_STR (UtStrtoul64, String); 131 132 133 *ReturnValue = 0; 134 135 /* A NULL return string returns a value of zero */ 136 137 if (*String == 0) 138 { 139 return_ACPI_STATUS (AE_OK); 140 } 141 142 if (!AcpiUtRemoveWhitespace (&String)) 143 { 144 return_ACPI_STATUS (AE_OK); 145 } 146 147 /* 148 * 1) Check for a hex constant. A "0x" prefix indicates base 16. 149 */ 150 if (AcpiUtDetectHexPrefix (&String)) 151 { 152 Base = 16; 153 } 154 155 /* 156 * 2) Check for an octal constant, defined to be a leading zero 157 * followed by sequence of octal digits (0-7) 158 */ 159 else if (AcpiUtDetectOctalPrefix (&String)) 160 { 161 Base = 8; 162 } 163 164 if (!AcpiUtRemoveLeadingZeros (&String)) 165 { 166 return_ACPI_STATUS (AE_OK); /* Return value 0 */ 167 } 168 169 /* 170 * Force a full 64-bit conversion. The caller (usually iASL) must 171 * check for a 32-bit overflow later as necessary (If current mode 172 * is 32-bit, meaning a 32-bit DSDT). 173 */ 174 OriginalBitWidth = AcpiGbl_IntegerBitWidth; 175 AcpiGbl_IntegerBitWidth = 64; 176 177 /* 178 * Perform the base 8, 10, or 16 conversion. A 64-bit numeric overflow 179 * will return an exception (to allow iASL to flag the statement). 180 */ 181 switch (Base) 182 { 183 case 8: 184 Status = AcpiUtConvertOctalString (String, ReturnValue); 185 break; 186 187 case 10: 188 Status = AcpiUtConvertDecimalString (String, ReturnValue); 189 break; 190 191 case 16: 192 default: 193 Status = AcpiUtConvertHexString (String, ReturnValue); 194 break; 195 } 196 197 /* Only possible exception from above is a 64-bit overflow */ 198 199 AcpiGbl_IntegerBitWidth = OriginalBitWidth; 200 return_ACPI_STATUS (Status); 201 } 202 203 204 /******************************************************************************* 205 * 206 * FUNCTION: AcpiUtImplicitStrtoul64 207 * 208 * PARAMETERS: String - Null terminated input string, 209 * must be a valid pointer 210 * 211 * RETURN: Converted integer 212 * 213 * DESCRIPTION: Perform a 64-bit conversion with restrictions placed upon 214 * an "implicit conversion" by the ACPI specification. Used by 215 * many ASL operators that require an integer operand, and support 216 * an automatic (implicit) conversion from a string operand 217 * to the final integer operand. The major restriction is that 218 * only hex strings are supported. 219 * 220 * ----------------------------------------------------------------------------- 221 * 222 * Base is always 16, either with or without the 0x prefix. Decimal and 223 * Octal strings are not supported, as per the ACPI specification. 224 * 225 * Examples (both are hex values): 226 * Add ("BA98", Arg0, Local0) 227 * Subtract ("0x12345678", Arg1, Local1) 228 * 229 * Conversion rules as extracted from the ACPI specification: 230 * 231 * The converted integer is initialized to the value zero. 232 * The ASCII string is always interpreted as a hexadecimal constant. 233 * 234 * 1) According to the ACPI specification, a "0x" prefix is not allowed. 235 * However, ACPICA allows this as an ACPI extension on general 236 * principle. (NO ERROR) 237 * 238 * 2) The conversion terminates when the size of an integer is reached 239 * (32 or 64 bits). There are no numeric overflow conditions. (NO ERROR) 240 * 241 * 3) The first non-hex character terminates the conversion and returns 242 * the current accumulated value of the converted integer (NO ERROR). 243 * 244 * 4) Conversion of a null (zero-length) string to an integer is 245 * technically not allowed. However, ACPICA allows this as an ACPI 246 * extension. The conversion returns the value 0. (NO ERROR) 247 * 248 * NOTE: There are no error conditions returned by this function. At 249 * the minimum, a value of zero is returned. 250 * 251 * Current users of this function: 252 * 253 * Interpreter - All runtime implicit conversions, as per ACPI specification 254 * iASL - Data Table Compiler parser (constants and math expressions) 255 * 256 ******************************************************************************/ 257 258 UINT64 259 AcpiUtImplicitStrtoul64 ( 260 char *String) 261 { 262 UINT64 ConvertedInteger = 0; 263 264 265 ACPI_FUNCTION_TRACE_STR (UtImplicitStrtoul64, String); 266 267 268 if (!AcpiUtRemoveWhitespace (&String)) 269 { 270 return_VALUE (0); 271 } 272 273 /* 274 * Per the ACPI specification, only hexadecimal is supported for 275 * implicit conversions, and the "0x" prefix is "not allowed". 276 * However, allow a "0x" prefix as an ACPI extension. 277 */ 278 AcpiUtRemoveHexPrefix (&String); 279 280 if (!AcpiUtRemoveLeadingZeros (&String)) 281 { 282 return_VALUE (0); 283 } 284 285 /* 286 * Ignore overflow as per the ACPI specification. This is implemented by 287 * ignoring the return status from the conversion function called below. 288 * On overflow, the input string is simply truncated. 289 */ 290 AcpiUtConvertHexString (String, &ConvertedInteger); 291 return_VALUE (ConvertedInteger); 292 } 293 294 295 /******************************************************************************* 296 * 297 * FUNCTION: AcpiUtExplicitStrtoul64 298 * 299 * PARAMETERS: String - Null terminated input string, 300 * must be a valid pointer 301 * 302 * RETURN: Converted integer 303 * 304 * DESCRIPTION: Perform a 64-bit conversion with the restrictions placed upon 305 * an "explicit conversion" by the ACPI specification. The 306 * main restriction is that only hex and decimal are supported. 307 * 308 * ----------------------------------------------------------------------------- 309 * 310 * Base is either 10 (default) or 16 (with 0x prefix). Octal (base 8) strings 311 * are not supported, as per the ACPI specification. 312 * 313 * Examples: 314 * ToInteger ("1000") Decimal 315 * ToInteger ("0xABCD") Hex 316 * 317 * Conversion rules as extracted from the ACPI specification: 318 * 319 * 1) The input string is either a decimal or hexadecimal numeric string. 320 * A hex value must be prefixed by "0x" or it is interpreted as decimal. 321 * 322 * 2) The value must not exceed the maximum of an integer value 323 * (32 or 64 bits). The ACPI specification states the behavior is 324 * "unpredictable", so ACPICA matches the behavior of the implicit 325 * conversion case. There are no numeric overflow conditions. (NO ERROR) 326 * 327 * 3) Behavior on the first non-hex character is not defined by the ACPI 328 * specification (for the ToInteger operator), so ACPICA matches the 329 * behavior of the implicit conversion case. It terminates the 330 * conversion and returns the current accumulated value of the converted 331 * integer. (NO ERROR) 332 * 333 * 4) Conversion of a null (zero-length) string to an integer is 334 * technically not allowed. However, ACPICA allows this as an ACPI 335 * extension. The conversion returns the value 0. (NO ERROR) 336 * 337 * NOTE: There are no error conditions returned by this function. At the 338 * minimum, a value of zero is returned. 339 * 340 * Current users of this function: 341 * 342 * Interpreter - Runtime ASL ToInteger operator, as per the ACPI specification 343 * 344 ******************************************************************************/ 345 346 UINT64 347 AcpiUtExplicitStrtoul64 ( 348 char *String) 349 { 350 UINT64 ConvertedInteger = 0; 351 UINT32 Base = 10; /* Default is decimal */ 352 353 354 ACPI_FUNCTION_TRACE_STR (UtExplicitStrtoul64, String); 355 356 357 if (!AcpiUtRemoveWhitespace (&String)) 358 { 359 return_VALUE (0); 360 } 361 362 /* 363 * Only Hex and Decimal are supported, as per the ACPI specification. 364 * A "0x" prefix indicates hex; otherwise decimal is assumed. 365 */ 366 if (AcpiUtDetectHexPrefix (&String)) 367 { 368 Base = 16; 369 } 370 371 if (!AcpiUtRemoveLeadingZeros (&String)) 372 { 373 return_VALUE (0); 374 } 375 376 /* 377 * Ignore overflow as per the ACPI specification. This is implemented by 378 * ignoring the return status from the conversion functions called below. 379 * On overflow, the input string is simply truncated. 380 */ 381 switch (Base) 382 { 383 case 10: 384 default: 385 AcpiUtConvertDecimalString (String, &ConvertedInteger); 386 break; 387 388 case 16: 389 AcpiUtConvertHexString (String, &ConvertedInteger); 390 break; 391 } 392 393 return_VALUE (ConvertedInteger); 394 } 395