1;/*
2;   vfdmsg.h
3;
4;   Virtual Floppy Drive for Windows
5;   Driver control program (console version)
6;   Message definition
7;
8;   Copyright (C) 2003-2005 Ken Kato
9;*/
10;
11;#ifndef _VFDMSG_H_
12;#define _VFDMSG_H_
13;
14;/*
15; __REACTOS__:
16; - Removed Japanese language.
17; + Added a second blank line between some entries.
18;*/
19
20MessageIdTypedef=DWORD
21LanguageNames=(English=0x409:MSG0409)
22
23;//==============================================
24;// Generic error messages
25;//==============================================
26;
27
28MessageId=
29SymbolicName=MSG_WRONG_PLATFORM
30Language=English
31Virtual Floppy Drive does not run on Windows 95/98/Me.
32.
33
34
35MessageId=
36SymbolicName=MSG_TOO_MANY_ARGS
37Language=English
38Too many command line parameters.
39.
40
41
42MessageId=
43SymbolicName=MSG_UNKNOWN_COMMAND
44Language=English
45Command '%1!s!' is unknown.
46.
47
48
49MessageId=
50SymbolicName=MSG_AMBIGUOUS_COMMAND
51Language=English
52Command '%1!s!' is ambiguous.
53.
54
55
56MessageId=
57SymbolicName=MSG_UNKNOWN_OPTION
58Language=English
59Option '%1!s!' is unknown.
60.
61
62
63MessageId=
64SymbolicName=MSG_DUPLICATE_ARGS
65Language=English
66Parameter %1!s! is used more than once.
67.
68
69
70;//==============================================
71;// Command result message
72;//==============================================
73;
74
75MessageId=
76SymbolicName=MSG_INSTALL_OK
77Language=English
78Installed the Virtual Floppy driver.
79.
80
81
82MessageId=
83SymbolicName=MSG_INSTALL_NG
84Language=English
85Failed to install the Virtual Floppy driver.
86.
87
88
89MessageId=
90SymbolicName=MSG_CONFIG_OK
91Language=English
92Configured the Virtual Floppy driver start method.
93.
94
95
96MessageId=
97SymbolicName=MSG_CONFIG_NG
98Language=English
99Failed to configure the Virtual Floppy driver start method.
100.
101
102
103MessageId=
104SymbolicName=MSG_REMOVE_OK
105Language=English
106Uninstalled the Virtual Floppy driver.
107.
108
109
110MessageId=
111SymbolicName=MSG_REMOVE_NG
112Language=English
113Failed to uninstall the Virtual Floppy driver.
114.
115
116
117MessageId=
118SymbolicName=MSG_REMOVE_PENDING
119Language=English
120The Virtual Floppy driver is going to be removed on the next system start up.
121You may need to restart the system before installing the driver again.
122.
123
124
125MessageId=
126SymbolicName=MSG_START_OK
127Language=English
128Started the Virtual Floppy driver.
129.
130
131
132MessageId=
133SymbolicName=MSG_START_NG
134Language=English
135Failed to start the Virtual Floppy driver.
136.
137
138
139MessageId=
140SymbolicName=MSG_STOP_OK
141Language=English
142Stopped the Virtual Floppy driver.
143.
144
145
146MessageId=
147SymbolicName=MSG_STOP_NG
148Language=English
149Failed to stop the Virtual Floppy driver.
150.
151
152
153MessageId=
154SymbolicName=MSG_STOP_PENDING
155Language=English
156Stop operation has succeeded, but something
157is preventing the driver from actually stopping.
158You may need to reboot the system before restarting the driver.
159.
160
161
162MessageId=
163SymbolicName=MSG_GET_SHELLEXT_NG
164Language=English
165Failed to get the shell extension status.
166.
167
168
169MessageId=
170SymbolicName=MSG_SET_SHELLEXT_NG
171Language=English
172Failed to set the shell extension status.
173.
174
175
176MessageId=
177SymbolicName=MSG_SHELLEXT_ENABLED
178Language=English
179Shell extension is enabled.
180.
181
182
183MessageId=
184SymbolicName=MSG_SHELLEXT_DISABLED
185Language=English
186Shell extension is disabled.
187.
188
189
190MessageId=
191SymbolicName=MSG_OPEN_NG
192Language=English
193Failed to open the image '%1!s!'.
194.
195
196
197MessageId=
198SymbolicName=MSG_CLOSE_OK
199Language=English
200Closed the image on the drive %1!c!.
201.
202
203
204MessageId=
205SymbolicName=MSG_CLOSE_NG
206Language=English
207Failed to close the image on the drive %1!c!.
208.
209
210
211MessageId=
212SymbolicName=MSG_SAVE_OK
213Language=English
214Saved the image on the drive %1!c! into '%2!s!'.
215.
216
217
218MessageId=
219SymbolicName=MSG_SAVE_NG
220Language=English
221Failed to save the image on the drive %1!c! into '%2!s!'.
222.
223
224
225MessageId=
226SymbolicName=MSG_PROTECT_NG
227Language=English
228Failed to set write protect state on the drive %1!c!.
229.
230
231
232MessageId=
233SymbolicName=MSG_FORMAT_OK
234Language=English
235Format complete.
236.
237
238
239MessageId=
240SymbolicName=MSG_FORMAT_NG
241Language=English
242Failed to format the drive %1!c!.
243.
244
245
246MessageId=
247SymbolicName=MSG_LINK_NG
248Language=English
249Failed to assign '%2!c!' to the drive %1!lu!.
250.
251
252
253MessageId=
254SymbolicName=MSG_UNLINK_NG
255Language=English
256Failed to unlink the letter from the drive %1!lu!.
257.
258
259
260;//==============================================
261;// Supplemental result message
262;//==============================================
263;
264
265MessageId=
266SymbolicName=MSG_GET_STAT_NG
267Language=English
268Failed to get the driver status.
269.
270
271
272MessageId=
273SymbolicName=MSG_GET_CONFIG_NG
274Language=English
275Failed to get the driver configuration.
276.
277
278
279MessageId=
280SymbolicName=MSG_GET_VERSION_NG
281Language=English
282Failed to get the driver version.
283.
284
285
286MessageId=
287SymbolicName=MSG_WRONG_DRIVER
288Language=English
289A wrong driver is installed.
290.
291
292
293MessageId=
294SymbolicName=MSG_QUERY_UPDATE
295Language=English
296Update now (y / n) ? %0
297.
298
299
300MessageId=
301SymbolicName=MSG_GET_MEDIA_NG
302Language=English
303Failed to get the current media status.
304.
305
306
307MessageId=
308SymbolicName=MSG_GET_FILE_NG
309Language=English
310Failed to get the image information.
311.
312
313
314MessageId=
315SymbolicName=MSG_GET_LINK_NG
316Language=English
317Failed to get the current drive letter.
318.
319
320
321MessageId=
322SymbolicName=MSG_LINK_FULL
323Language=English
324No drive letter is available.
325.
326
327
328MessageId=
329SymbolicName=MSG_ACCESS_NG
330Language=English
331Failed to access the drive %1!c!.
332.
333
334
335MessageId=
336SymbolicName=MSG_DRIVER_EXISTS
337Language=English
338The Virtual Floppy driver is already installed.
339.
340
341
342MessageId=
343SymbolicName=MSG_NOT_INSTALLED
344Language=English
345The Virtual Floppy driver is not installed.
346.
347
348
349MessageId=
350SymbolicName=MSG_ALREADY_RUNNING
351Language=English
352The Virtual Floppy driver is already running.
353.
354
355
356MessageId=
357SymbolicName=MSG_NOT_STARTED
358Language=English
359The Virtual Floppy driver is not running.
360.
361
362
363MessageId=
364SymbolicName=MSG_TARGET_NOTICE
365Language=English
366Using the default drive (%1!c!).
367.
368
369
370MessageId=
371SymbolicName=MSG_CREATE_NOTICE
372Language=English
373Creating a new image file.
374.
375
376
377MessageId=
378SymbolicName=MSG_CREATE_CONFIRM
379Language=English
380Create a new image file (Y:yes / N:no) ? %0
381.
382
383
384MessageId=
385SymbolicName=MSG_OVERWRITE_NOTICE
386Language=English
387Overwriting the existing file.
388.
389
390
391MessageId=
392SymbolicName=MSG_OVERWRITE_CONFIRM
393Language=English
394Overwrite the existing file (Y:yes / N:no) ? %0
395.
396
397
398MessageId=
399SymbolicName=MSG_CREATE_NG
400Language=English
401Failed to create the new image file '%1!s!'.
402.
403
404
405MessageId=
406SymbolicName=MSG_FILE_CREATED
407Language=English
408Created a new image file.
409.
410
411
412MessageId=
413SymbolicName=MSG_RAM_MEDIA_UNKNOWN
414Language=English
415A size is not specified for a new RAM image.
416.
417
418
419MessageId=
420SymbolicName=MSG_FILE_MEDIA_UNKNOWN
421Language=English
422A size is not specified for a new image file.
423.
424
425
426MessageId=
427SymbolicName=MSG_CREATE144_NOTICE
428Language=English
429Creating a 1.44MB image.
430.
431
432
433MessageId=
434SymbolicName=MSG_CREATE144_CONFIRM
435Language=English
436Create a 1.44MB image (Y:yes / N:no) ? %0
437.
438
439
440MessageId=
441SymbolicName=MSG_IMAGE_TOO_SMALL
442Language=English
443The image is too small.
444.
445
446
447MessageId=
448SymbolicName=MSG_NO_MATCHING_MEDIA
449Language=English
450The image size (%1!lu! bytes) does not match any supported media.
451.
452
453
454MessageId=
455SymbolicName=MSG_MEDIATYPE_NOTICE
456Language=English
457Opening as a %1!s! media (%2!lu! bytes).
458.
459
460
461MessageId=
462SymbolicName=MSG_MEDIATYPE_SUGGEST
463Language=English
464The largest possible media is %1!s! (%2!lu! bytes).
465.
466
467
468MessageId=
469SymbolicName=MSG_MEDIATYPE_CONFIRM
470Language=English
471Open as this media type (Y:yes / N:no) ? %0
472.
473
474
475MessageId=
476SymbolicName=MSG_RAM_MODE_NOTICE
477Language=English
478Opening the image in RAM mode.
479.
480
481
482MessageId=
483SymbolicName=MSG_RAM_MODE_ONLY
484Language=English
485This file must be opened in RAM mode.
486.
487
488
489MessageId=
490SymbolicName=MSG_RAM_MODE_CONFIRM
491Language=English
492Open in RAM mode (Y:yes / N:no) ? %0
493.
494
495
496MessageId=
497SymbolicName=MSG_DEFAULT_PROTECT
498Language=English
499The media will be write protected by default.
500.
501
502
503MessageId=
504SymbolicName=MSG_DRIVE_BUSY
505Language=English
506An image is already opened.
507.
508
509
510MessageId=
511SymbolicName=MSG_TARGET_REQUIRED
512Language=English
513Specify a target file to save.
514.
515
516
517MessageId=
518SymbolicName=MSG_TARGET_UP_TO_DATE
519Language=English
520The image file is up to date.
521.
522
523
524MessageId=
525SymbolicName=MSG_OVERWRITE_PROMPT
526Language=English
527Overwrite the existing file
528(O: just overwrite / T: overwrite & truncate / C: cancel) ? %0
529.
530
531
532MessageId=
533SymbolicName=MSG_TARGET_IS_ZIP
534Language=English
535Cannot overwrite a ZIP compressed file.
536.
537
538
539MessageId=
540SymbolicName=MSG_SAVE_FORCE
541Language=English
542The save operation is forced to continue.
543.
544
545
546MessageId=
547SymbolicName=MSG_SAVE_QUIT
548Language=English
549The save operation is aborted.
550.
551
552
553MessageId=
554SymbolicName=MSG_FORMAT_FORCE
555Language=English
556The format operation is forced to continue.
557.
558
559
560MessageId=
561SymbolicName=MSG_FORMAT_QUIT
562Language=English
563The format operation is aborted.
564.
565
566
567MessageId=
568SymbolicName=MSG_MEDIA_MODIFIED
569Language=English
570RAM disk data on the drive %1!c!: is modified.
571.
572
573
574MessageId=
575SymbolicName=MSG_CLOSE_FORCE
576Language=English
577The close operation is forced to continue.
578.
579
580
581MessageId=
582SymbolicName=MSG_CLOSE_QUIT
583Language=English
584The close operation is aborted.
585.
586
587
588MessageId=
589SymbolicName=MSG_CLOSE_CONFIRM
590Language=English
591Close the image anyway (Y:yes / N:no) ? %0
592.
593
594
595MessageId=
596SymbolicName=MSG_RETRY_FORCE_CANCEL
597Language=English
598R:retry / F:force / C:cancel ? %0
599.
600
601
602MessageId=
603SymbolicName=MSG_RETRY_CANCEL
604Language=English
605R:retry / C:cancel ? %0
606.
607
608
609MessageId=
610SymbolicName=MSG_LOCK_NG
611Language=English
612Failed to lock the drive %1!c!.  Some programs may be using the drive.
613.
614
615
616MessageId=
617SymbolicName=MSG_STOP_FORCE
618Language=English
619Failed to close the all drives.  The operation is forced to continue.
620.
621
622
623MessageId=
624SymbolicName=MSG_STOP_QUIT
625Language=English
626Failed to close the all drives.  The operation is aborted.
627.
628
629
630MessageId=
631SymbolicName=MSG_STOP_WARN
632Language=English
633Failed to close the all drives.  The driver may not be able to unload
634properly.  Continue the stop operation?
635.
636
637
638MessageId=
639SymbolicName=MSG_REMOVE_FORCE
640Language=English
641Failed to stop the driver.  The operation is forced to continue;
642.
643
644
645MessageId=
646SymbolicName=MSG_REMOVE_QUIT
647Language=English
648Failed to stop the driver.  The operation is aborted.
649.
650
651
652MessageId=
653SymbolicName=MSG_REMOVE_WARN
654Language=English
655Failed to stop the driver.  The driver may not be removed completely
656until the system is restarted.  Continue the operation?
657.
658
659
660MessageId=
661SymbolicName=MSG_UNKNOWN_LONG
662Language=English
663Unknown (0x%1!08x!)
664.
665
666
667MessageId=
668SymbolicName=MSG_DRIVER_FILE
669Language=English
670Driver     : %1!s!
671.
672
673
674MessageId=
675SymbolicName=MSG_DRIVER_VERSION
676Language=English
677Version    : %1!d!.%2!d! %3!s!
678.
679
680
681MessageId=
682SymbolicName=MSG_START_TYPE
683Language=English
684Start Type : %0
685.
686
687
688MessageId=
689SymbolicName=MSG_START_AUTO
690Language=English
691AUTO
692.
693
694
695MessageId=
696SymbolicName=MSG_START_BOOT
697Language=English
698BOOT
699.
700
701
702MessageId=
703SymbolicName=MSG_START_DEMAND
704Language=English
705DEMAND
706.
707
708
709MessageId=
710SymbolicName=MSG_START_DISABLED
711Language=English
712DISABLED
713.
714
715
716MessageId=
717SymbolicName=MSG_START_SYSTEM
718Language=English
719SYSTEM
720.
721
722
723MessageId=
724SymbolicName=MSG_DRIVER_STATUS
725Language=English
726Status     : %0
727.
728
729
730MessageId=
731SymbolicName=MSG_STATUS_STOPPED
732Language=English
733STOPPED
734.
735
736
737MessageId=
738SymbolicName=MSG_STATUS_START_P
739Language=English
740START_PENDING
741.
742
743
744MessageId=
745SymbolicName=MSG_STATUS_STOP_P
746Language=English
747STOP_PENDING
748.
749
750
751MessageId=
752SymbolicName=MSG_STATUS_RUNNING
753Language=English
754RUNNING
755.
756
757
758MessageId=
759SymbolicName=MSG_STATUS_CONT_P
760Language=English
761CONTINUE_PENDING
762.
763
764
765MessageId=
766SymbolicName=MSG_STATUS_PAUSE_P
767Language=English
768PAUSE_PENDING
769.
770
771
772MessageId=
773SymbolicName=MSG_STATUS_PAUSED
774Language=English
775PAUSED
776.
777
778
779MessageId=
780SymbolicName=MSG_DRIVE_LETTER
781Language=English
782Drive %1!lu!    : %0
783.
784
785
786MessageId=
787SymbolicName=MSG_PERSISTENT
788Language=English
789%1!c! (Persistent) %0
790.
791
792
793MessageId=
794SymbolicName=MSG_EPHEMERAL
795Language=English
796%1!c! (Ephemeral) %0
797.
798
799
800MessageId=
801SymbolicName=MSG_IMAGE_NONE
802Language=English
803Image      : <none>
804.
805
806
807MessageId=
808SymbolicName=MSG_IMAGE_NAME
809Language=English
810Image      : %1!s!
811.
812
813
814MessageId=
815SymbolicName=MSG_FILE_DESC
816Language=English
817Description: %1!s!
818.
819
820
821MessageId=
822SymbolicName=MSG_DISKTYPE_FILE
823Language=English
824Type       : FILE
825.
826
827
828MessageId=
829SymbolicName=MSG_DISKTYPE_RAM_CLEAN
830Language=English
831Type       : RAM (not modified)
832.
833
834
835MessageId=
836SymbolicName=MSG_DISKTYPE_RAM_DIRTY
837Language=English
838Type       : RAM (modified)
839.
840
841
842MessageId=
843SymbolicName=MSG_MEDIA_TYPE
844Language=English
845Media      : %1!s!
846.
847
848
849MessageId=
850SymbolicName=MSG_MEDIA_WRITABLE
851Language=English
852Access     : Writable
853.
854
855
856MessageId=
857SymbolicName=MSG_MEDIA_PROTECTED
858Language=English
859Access     : Write Protected
860.
861
862
863;//
864;// Help message text
865;//
866MessageId=
867SymbolicName=MSG_HINT_INSTALL
868Language=English
869SYNTAX: %1!s!INSTALL [driver] [/AUTO | /A]
870Try '%1!s!HELP INSTALL' for more information.
871.
872
873
874MessageId=
875SymbolicName=MSG_HINT_REMOVE
876Language=English
877SYNTAX: %1!s!REMOVE [/FORCE | /F | /QUIT | /Q]
878Try '%1!s!HELP REMOVE' for more information.
879.
880
881
882MessageId=
883SymbolicName=MSG_HINT_CONFIG
884Language=English
885SYNTAX: %1!s!CONFIG {/AUTO | /A | /MANUAL | /M}
886Try '%1!s!HELP CONFIG' for more information.
887.
888
889
890MessageId=
891SymbolicName=MSG_HINT_START
892Language=English
893SYNTAX: %1!s!START
894Try '%1!s!HELP START' for more information.
895.
896
897
898MessageId=
899SymbolicName=MSG_HINT_STOP
900Language=English
901SYNTAX: %1!s!STOP [/FORCE | /F | /QUIT | /Q]
902Try '%1!s!HELP STOP' for more information.
903.
904
905
906MessageId=
907SymbolicName=MSG_HINT_SHELL
908Language=English
909SYNTAX: %1!s!SHELL [/ON | /OFF]
910Try '%1!s!HELP SHELL' for more information.
911.
912
913
914MessageId=
915SymbolicName=MSG_HINT_OPEN
916Language=English
917SYNTAX: %1!s!OPEN [drive:] [file] [/NEW] [/RAM] [/P | /W]
918            [ /160 | /180 | /320 | /360 | /640 | /720 | /820 | /120 | /1.20
919              | /144 | /1.44 | /168 | /1.68 | /172 | /1.72 | /288 | /2.88 ]
920            [ /5 | /525 | /5.25 ] [/F | /FORCE | /Q | QUIT]
921Try '%1!s!HELP OPEN' for more information.
922.
923
924
925MessageId=
926SymbolicName=MSG_HINT_CLOSE
927Language=English
928SYNTAX: %1!s!CLOSE [drive:] [/FORCE | /F | /QUIT | /Q]
929Try '%1!s!HELP CLOSE' for more information.
930.
931
932
933MessageId=
934SymbolicName=MSG_HINT_SAVE
935Language=English
936SYNTAX: %1!s!SAVE [drive:] [file] [/OVER | /O | /TRUNC | /T]
937                     [/FORCE | /F | /QUIT | /Q]
938Try '%1!s!HELP SAVE' for more information.
939.
940
941
942MessageId=
943SymbolicName=MSG_HINT_PROTECT
944Language=English
945SYNTAX: %1!s!PROTECT [drive:] [/ON | /OFF]
946Try '%1!s!HELP PROTECT' for more information.
947.
948
949
950MessageId=
951SymbolicName=MSG_HINT_FORMAT
952Language=English
953SYNTAX: %1!s!FORMAT [drive:] [/FORCE | /F | /QUIT | /Q]
954Try '%1!s!HELP FORMAT' for more information.
955.
956
957
958MessageId=
959SymbolicName=MSG_HINT_LINK
960Language=English
961SYNTAX: %1!s!LINK [number] [letter] [/L]
962Try '%1!s!HELP LINK' for more information.
963.
964
965
966MessageId=
967SymbolicName=MSG_HINT_ULINK
968Language=English
969SYNTAX: %1!s!ULINK [drive]
970Try '%1!s!HELP ULINK' for more information.
971.
972
973
974MessageId=
975SymbolicName=MSG_HINT_STATUS
976Language=English
977SYNTAX: %1!s!STATUS
978Try '%1!s!HELP STATUS' for more information.
979.
980
981
982MessageId=
983SymbolicName=MSG_HINT_VERSION
984Language=English
985SYNTAX: %1!s!VERSION
986Print version information.
987.
988
989
990MessageId=
991SymbolicName=MSG_HELP_GENERAL
992Language=English
993Usage:
994  %1!s![command [options...]]
995
996Commands:
997  INSTALL   Install the Virtual Floppy driver.
998  REMOVE    Uninstall the Virtual Floppy driver.
999  CONFIG    Configure the Virtual Floppy driver.
1000  START     Start the Virtual Floppy driver.
1001  STOP      Stop the Virtual Floppy driver.
1002  SHELL     Enable/disable the shell extension.
1003  OPEN      Open a Virtual Floppy image.
1004  CLOSE     Close a Virtual Floppy image.
1005  SAVE      Save the current image into a file.
1006  PROTECT   Enable/disable drive write protect.
1007  FORMAT    Format the current Virtual Floppy media.
1008  LINK      Assign a drive letter to a Virtual Floppy drive.
1009  ULINK     Remove a drive letter from a Virtual Floppy drive.
1010  STATUS    Print the current status.
1011  HELP | ?  Print usage help.
1012  VERSION   Print version information
1013
1014If a command is not specified, the interactive console is started.
1015Type '%1!s!HELP CONSOLE' for more information about the interactive
1016console.
1017
1018All commands and options are case insensitive.
1019
1020Shorter command name can be used as long as the command can be
1021distinguished uniquely: I for INSTALL, REM for REMOVE, etc. are
1022accepted, but ST is invalid because it is ambiguous.  You have
1023to type as much as STAR, STO or STAT in order to distinguish them.
1024
1025'%1!s!command {/? | /h}' shows a brief hint about each command.
1026.
1027
1028
1029MessageId=
1030SymbolicName=MSG_HELP_INSTALL
1031Language=English
1032Install the Virtual Floppy driver.
1033
1034SYNTAX:
1035  %1!s!INSTALL [driver] [/AUTO | /A]
1036
1037OPTIONS:
1038  driver    Specifies the path to the Virtual Floppy driver file.
1039            Default is VFD.SYS in the same directory as the VFD
1040            console program (Note: *NOT* current directory).
1041
1042  /AUTO     Configures the driver to start at the system startup.
1043  /A        (Note: *NOT* to start the driver after installation.)
1044            By default the driver has to be started manually.
1045
1046Administrator rights are required to install a devide driver.
1047
1048Device drivers cannot be installed from network drives.
1049Make sure to place VFD.SYS on a local drive.
1050
1051It is advised to install the driver with the /AUTO option if the
1052Virtual Floppy drive is going to be used by users other than
1053Administrators and Power Users, who don't have enough rights to
1054start device drivers.
1055.
1056
1057
1058MessageId=
1059SymbolicName=MSG_HELP_CONFIG
1060Language=English
1061Configure the Virtual Floppy driver start method.
1062
1063SYNTAX:
1064  %1!s!CONFIG {/AUTO | /A | /MANUAL | /M}
1065
1066OPTIONS:
1067  /AUTO     Configures the driver to start at the system startup.
1068  /A
1069
1070  /MANUAL   Configures the driver to start on demand.
1071  /M
1072
1073The change takes effect the next system start up.
1074Administrator rights are required to configure a devide driver.
1075.
1076
1077
1078MessageId=
1079SymbolicName=MSG_HELP_REMOVE
1080Language=English
1081Uninstall the Virtual Floppy driver.
1082
1083SYNTAX:
1084  %1!s!REMOVE [/FORCE | /F | /QUIT | /Q]
1085
1086OPTIONS:
1087  /FORCE    Suppress prompting and forces the remove operation when
1088  /F        the driver cannot be stopped.
1089
1090  /QUIT     Suppress prompting and quits the remove operation when
1091  /Q        the driver cannot be stopped.
1092
1093Closes all images and stops the driver if necessary, then removes the
1094Virtual Floppy driver entries from the system registry.
1095This command does not delete the driver file from the local disk.
1096
1097There are cases, due to the condition of the system, when
1098uninstallation does not complete immediately and restarting of the
1099system is required.  In such cases you may not be able to install the
1100Virtual Floppy driver again until the system is restarted and
1101uninstallation process is complete.
1102
1103Administrator rights are required to uninstall a device driver.
1104.
1105
1106
1107MessageId=
1108SymbolicName=MSG_HELP_START
1109Language=English
1110Start the Virtual Floppy driver.
1111
1112SYNTAX:
1113  %1!s!START
1114
1115OPTIONS:
1116  NONE
1117
1118If the driver is not installed, this command attempts to install it
1119with thedefault options.
1120
1121At least Power User rights are required to start a device driver.
1122.
1123
1124
1125MessageId=
1126SymbolicName=MSG_HELP_STOP
1127Language=English
1128Stop the Virtual Floppy driver
1129
1130SYNTAX:
1131  %1!s!STOP [/FORCE | /F | /QUIT | /Q]
1132
1133OPTIONS:
1134  /FORCE    Suppress prompting and forces the stop operation when any
1135  /F        of the drives are in use and cannot be closed.
1136
1137  /QUIT     Suppress prompting and quits the stop operation when any
1138  /Q        of the drives are in use and cannot be closed.
1139
1140This command closes all images before stopping the driver.
1141An image cannot be closed if the virtual drive is used by any other
1142programs.  Forcing the stop operation with a drive in use may leave
1143the driver in stop pending state.  In such cases the driver cannot be
1144restarted until all programs stop using the drive and the driver is
1145properly unloaded.
1146
1147At least Power User rights are required to stop a device driver.
1148.
1149
1150
1151MessageId=
1152SymbolicName=MSG_HELP_SHELL
1153Language=English
1154Enable / disable the Virtual Floppy drive shell extension.
1155
1156SYNTAX:
1157  %1!s!SHELL [/ON | /OFF]
1158
1159OPTIONS:
1160  /ON       Enables the shell extension.
1161
1162  /OFF      Disables the shell extension.
1163
1164If an option is not specified, this command prints the current state
1165of the shell extension.
1166.
1167
1168
1169;// __REACTOS__: s/read only/read-only/.
1170MessageId=
1171SymbolicName=MSG_HELP_OPEN
1172Language=English
1173Open a Virtual Floppy image.
1174
1175SYNTAX:
1176  %1!s!OPEN [drive:] [file] [/NEW] [/RAM] [/P | /W]
1177        [/size] [/media] [/F | /FORCE | /Q | /QUIT]
1178
1179OPTIONS:
1180  drive:    Specifies a target Virtual Floppy drive, either by a drive
1181            number or a drive letter, such as "0:", "1:", "B:", "X:".
1182            The trailing ':' is required.
1183            The drive 0 is assumed if not specified.
1184
1185  file      Specifies a Virtual Floppy image file to open.
1186            An empty RAM disk is created if not specified.
1187
1188  /NEW      Creates a new image file.
1189            Ignored if a file is not specified.
1190
1191  /RAM      RAM mode - mounts an on-memory copy of the image, instead
1192            of directly mounting the image file.
1193            Changes made to the virtual media are lost when the image
1194            is closed, unless the image is explicitly saved to a file
1195            with the 'SAVE' command.
1196            Ignored if a file is not specified.
1197
1198  /P        Opens the image as a write protected media.
1199            Write protection state can be chenged later with the
1200            'PROTECT' command.
1201
1202  /W        Opens the image as a writable media.
1203            Write protection state can be chenged later with the
1204            'PROTECT' command.
1205
1206  /size     Specifies a media size.  Acceptable options are:
1207
1208              /160 (160KB)    /820 (820KB)
1209              /180 (180KB)    /120 or /1.20 (1.20MB)
1210              /320 (320KB)    /144 or /1.44 (1.44MB)
1211              /360 (360KB)    /168 or /1.68 (1.68MB DMF)
1212              /640 (640KB)    /172 or /1.72 (1.72MB DMF)
1213              /720 (720KB)    /288 or /2.88 (2.88MB)
1214
1215  /5        Specifies a 5.25 inch media.  Takes effect only with
1216  /525      640KB, 720KB and 1.2MB media and otherwise ignored.
1217  /5.25     160KB, 180KB, 320KB and 360KB media are always 5.25".
1218            820KB, 1.44MB, 1.68MB, 1.72MB and 2.88MB media are always
1219            3.5".
1220
1221  /FORCE    Suppress prompring on minor conflicts and/or omission of
1222  /F        necessary parameters and continues the operation as best
1223            as possible, employing default values if necessary.
1224            See below for details.
1225
1226  /QUIT     Suppress prompring on minor conflicts and/or omission of
1227  /Q        necessary parameters and quits the operation on the first
1228            such occasion.
1229            See below for details.
1230
1231If the target drive does not have a drive letter, this command also
1232assigns a local drive letter (see '%1!s!HELP LINK') using the first
1233available letter.
1234
1235Read-only files, NTFS encrypted/compressed files and ZIP compressed
1236image files (such as WinImage IMZ file) cannot be mounted directly
1237and must be opened in RAM mode.
1238
1239Without a size option, size of a virtual media is decided from the
1240actual image size.  With an explicit size option you can mount a
1241file as a smaller media, in such cases surplus data at the end of
1242the image is ignored.
1243A virtual media size cannot exceed the actual image size.
1244
1245The /F and /Q options affect the behavior of the OPEN command in
1246many ways:
1247
1248  When the target file does not exist and the /NEW option
1249  is not present
1250
1251    (none) ask user whether to create the target
1252      /F   create the target without asking
1253      /Q   abort the operation without asking
1254
1255  The target file exists and the /NEW option is present
1256
1257    (none) ask user whether to overwrite the existing file
1258      /F   overwrite the file without asking
1259      /Q   abort the operation without asking
1260
1261  The target file cannot be mounted directly and the /RAM
1262  option is not present
1263
1264    (none) ask user whether to open in RAM mode
1265      /F   open in RAM mode without asking
1266      /Q   abort the operation without asking
1267
1268  A size option is not present for creating a new image
1269
1270    (none) ask user whether to create a 1.44MB (default) image
1271      /F   create a 1.44MB image without asking
1272      /Q   abort the operation without asking
1273
1274  A size option is not present and the target file size is
1275  not an exact match for any of supported media
1276
1277    (none) ask user whether to mount as a largest media to fit
1278           in the actual image
1279      /F   mount as a largest media to fit in the actual image
1280           without asking
1281      /Q   abort the operation without asking
1282.
1283
1284
1285MessageId=
1286SymbolicName=MSG_HELP_CLOSE
1287Language=English
1288Close a Virtual Floppy image.
1289
1290SYNTAX:
1291  %1!s!CLOSE [drive:] [/FORCE | /F | /QUIT | /Q]
1292
1293OPTIONS:
1294  drive:    Specifies a target Virtual Floppy drive, either by a drive
1295            number or a drive letter, such as "0:", "1:", "B:", "X:".
1296            The trailing ':' is optional.
1297            "*" stands for both drives.
1298            The drive 0 is used if not specified.
1299
1300  /FORCE    Suppress prompting and forces the close operation when RAM
1301  /F        disk data is modified or the drive is in use.
1302            Forcing with the drive in use will work only on Windows
1303            2000 and later (not on NT).
1304
1305  /QUIT     Suppress prompting and quits the close operation when RAM
1306  /Q        disk data is modified or the drive is in use.
1307
1308If neither /Q nor /F is specified, the user has to choose whether to
1309retry, force, or quit.
1310
1311Unlike the previous versions of the VFD, this command does *NOT*
1312remove the drive letter of the target drive.
1313.
1314
1315
1316MessageId=
1317SymbolicName=MSG_HELP_SAVE
1318Language=English
1319Save the current image data into a file.
1320
1321SYNTAX:
1322  %1!s!SAVE [drive:] [file] [/O | /OVER | /T | /TRUNC]
1323        [/FORCE | /F | /QUIT | /Q]
1324
1325OPTIONS:
1326  drive:    Specifies a target Virtual Floppy drive, either by a drive
1327            number or a drive letter, such as "0:", "1:", "B:", "X:".
1328            The trailing ':' is required.
1329            The drive 0 is used if not specified.
1330
1331  file      Specifies a file name to save data.
1332            If not specified, the current image file name is used.
1333            Required if the current image is a pure RAM disk.
1334
1335  /OVER     Overwrite the file if the target file exists.
1336  /O        If the existing file is larger than the current image,
1337            file size is not changed and the surplus data at the end
1338            of the file is left unchanged.
1339            If the target is the current image file, this is the
1340            default behavior of this command.
1341            Ignored if the target does not exist.
1342
1343  /TRUNC    Overwrite the file if the target file exists.
1344  /T        If the existing file is larger than the current image,
1345            the file is truncated to the image size and the surplus
1346            data at the end of the file is discarded.
1347            Ignored if the target does not exist.
1348
1349  /FORCE    Suppress prompting when the target volume can not be
1350  /F        locked and forces the operation without locking.
1351
1352  /QUIT     Suppress prompting when the target volume can not be
1353  /Q        locked and quits the operation.
1354
1355If the target is the current image file, the file is always
1356overwritten without a question and the /O option is not necessary.
1357Otherwise this command fails if the target file exists and neither
1358/O or /T is present.
1359
1360If the existing file is smaller than the current image, the file
1361is always expanded to the current image size either with /O or /T.
1362
1363This program NEVER overwrites a ZIP compressed file regardless of /O
1364or /T option, or even if it is the current image file.
1365The SAVE command always fails if the target is a ZIP compressed file.
1366.
1367
1368
1369;// __REACTOS__: s/read only/read-only/.
1370MessageId=
1371SymbolicName=MSG_HELP_PROTECT
1372Language=English
1373Enable / disable drive write protect.
1374
1375SYNTAX:
1376  %1!s!PROTECT [drive:] [/ON | /OFF]
1377
1378OPTIONS:
1379  drive:    Specifies a target Virtual Floppy drive, either by a drive
1380            number or a drive letter, such as "0:", "1:", "B:", "X:".
1381            The trailing ':' is optional.
1382            The drive 0 is used if not specified.
1383
1384  /ON       Enables the drive write protect - the drive becomes read-only.
1385
1386  /OFF      Disables the drive write protect - the drive becomes writable.
1387
1388If an option is not specified, this command prints the current write
1389protect state of the drive.
1390
1391After write protection is disabled with this command, Windows may not
1392notice the change immediately and claim that the media is still write
1393protected.  Refreshing the Explorer or retrying the faild operation
1394will fix that.
1395.
1396
1397
1398MessageId=
1399SymbolicName=MSG_HELP_FORMAT
1400Language=English
1401Format a Virtual Floppy media with FAT.
1402
1403SYNTAX:
1404  %1!s!FORMAT [drive:] [/FORCE | /F | /QUIT | /Q]
1405
1406OPTIONS:
1407  drive:    Specifies a target Virtual Floppy drive, either by a drive
1408            number or a drive letter, such as "0:", "1:", "B:", "X:".
1409            The trailing ':' is optional.
1410            The drive 0 is used if not specified.
1411
1412  /FORCE    Suppress prompting when the target volume can not be
1413  /F        locked and forces the operation without locking.
1414
1415  /QUIT     Suppress prompting when the target volume can not be
1416  /Q        locked and quits the operation.
1417.
1418
1419
1420MessageId=
1421SymbolicName=MSG_HELP_LINK
1422Language=English
1423Assign a drive letter to a Virtual Floppy drive.
1424
1425SYNTAX:
1426  %1!s!LINK [number] [letter] [/L]
1427
1428OPTIONS:
1429  number    Specifies a target drive number.
1430            If not specified, drive 0 is used.
1431            "*" stands for both drives.
1432
1433  letter    Spesifies a drive letter to assign.
1434            If not specified, the first available letter is used.
1435            If the target is both drives, letters for each drives can
1436            be specified like "BF" (B for 0, F for 1).
1437
1438  /L        Assign an ephemeral / local drive letter.
1439            The default (without this option) is persistent / global.
1440
1441Persistent / global drive letters are reclaimed each time the driver
1442starts.
1443On Windows 2000 SP2 and later they are not deleted on user logoff.
1444On Terminal Servers they are globaly visible to all users on the
1445system.
1446
1447Ephemeral / local drive letters are not reclaimed on driver start up.
1448On Windows 2000 SP2 and later they are deleted on user logoff.
1449On Terminal Servers, they are visible only to the current user and
1450each user can assign different drive letter to the same drive.
1451.
1452
1453
1454MessageId=
1455SymbolicName=MSG_HELP_ULINK
1456Language=English
1457Remove a drive letter from a Virtual Floppy drive.
1458
1459SYNTAX:
1460  %1!s!ULINK [drive]
1461
1462OPTIONS:
1463  drive     Specifies a target Virtual Floppy drive, either by a drive
1464            number or a drive letter.
1465            If not specified, drive 0 is used.
1466            "*" stands for both drives.
1467
1468Drive letters can be removed even if the drive is being used.
1469Some applications such as Windows Explorer detects it and acts
1470accordingly, for example closes folder windows for the drive.
1471.
1472
1473
1474MessageId=
1475SymbolicName=MSG_HELP_STATUS
1476Language=English
1477Print the current status.
1478
1479SYNTAX:
1480  %1!s!STATUS
1481
1482OPTIONS:
1483  NONE
1484
1485This command prints the following information:
1486
1487  Driver file path
1488  Driver version
1489  Driver start type
1490  Driver running state
1491
1492  Shell extension status
1493
1494  Drive letter
1495  Image name
1496  Image description (file type, size, file attributes, etc.)
1497  Disk type (RAM or FILE)
1498  Write protection
1499.
1500
1501
1502MessageId=
1503SymbolicName=MSG_HELP_HELP
1504Language=English
1505Print the VFD console help.
1506
1507SYNTAX:
1508  %1!s!HELP [command | topic]
1509
1510OPTIONS:
1511  command   Specifies one of the following commands
1512
1513              INSTALL REMOVE  CONFIG  START   STOP
1514              SHELL   OPEN    CLOSE   SAVE    PROTECT
1515              FORMAT  LINK    ULINK   STATUS  HELP
1516              VERSION
1517
1518  topic     Specifies one of the following topics
1519
1520              CONSOLE
1521
1522If an option is not specified, the general help is printed.
1523.
1524
1525
1526MessageId=
1527SymbolicName=MSG_CONSOLE_HINT
1528Language=English
1529
1530    ********** the VFD interactive console **********
1531
1532you can use the following commands in addition to regular VFD commands:
1533
1534    ATTRIB  CD      CHDIR   <drive>:
1535    DIR     EXIT    QUIT    BYE
1536    .(period) + Windows command
1537
1538Type '? CONSOLE' or 'HELP CONSOLE' for more information
1539
1540.
1541
1542
1543MessageId=
1544SymbolicName=MSG_HELP_CONSOLE
1545Language=English
1546In the interactive console, you can use the following commands in
1547addition to regular VFD commands:
1548
1549  CD | CHDIR
1550            Displays the name of or changes the current directory.
1551            Similar to the Windows CD/CHDIR command.
1552
1553  <drive>:  Change the current directory to the root of the specified
1554            drive.  Similar to the Windows drive change command.
1555
1556  DIR       Executes the Windows DIR command.
1557            All options for the Windows DIR command are available.
1558
1559  ATTRIB    Executes the Windows ATTRIB command.
1560            All options for the Windows ATTRIB command are available.
1561
1562  EXIT | QUIT | BYE | <Ctrl+C>
1563            Quits the VFD interactive console.
1564
1565A command typed with a leading '.'(period) is executed by the Windows
1566command processor (cmd.exe).
1567
1568  e.g.) .FORMAT [options ...]
1569          Executes the Windows format.exe.  All options are passed to
1570          the format.exe.
1571
1572        FORMAT [options ...]
1573          Executes the VFD 'FORMAT' command.
1574
1575To execute an external command with spaces in its name, put the
1576'.' (period) outside the quoteation.
1577
1578  e.g.) ."C:\Program Files\My App\My Program.exe" [options ...]
1579
1580DIR and ATTRIB Windows commands are recognized without a period,
1581for they are used very frequently.
1582
1583Commands to affect current directory and environment variable have
1584effects only inside the Windows command processor.  You can execute
1585them but they have no effect on the VFD console.
1586
1587  .CD .CHDIR .<drive>: to change the current directory
1588  .PUSHD .POPD
1589  .PATH to change the search path
1590  .PROMPT
1591  .SET to change the value of an environment variable
1592.
1593
1594
1595MessageId=
1596SymbolicName=MSG_PAGER_PROMPT
1597Language=English
1598Press any key to continue ('Q' or <Ctrl+C> to quit) ...%0
1599.
1600
1601
1602;
1603;#endif // _VFDMSG_H_
1604