en to en_GB translation catalogue (100 entries)

note: i18n: ectx: property (text), widget (QLabel, label)
en: <p>This dialog can be used to setup external command line applications as audio encoders. These can then be used by K3b to encode audio data (Tracks from an audio CD or the titles from an audio project) to formats that are normally not supported (i.e. no encoder plugin exists).
    <p>K3b comes with a selection of predefined external applications that depends on the installed applications.
en_GB: <p>This dialogue can be used to setup external command line applications as audio encoders. These can then be used by K3b to encode audio data (Tracks from an audio CD or the titles from an audio project) to formats that are normally not supported (i.e. no encoder plugin exists).
    <p>K3b comes with a selection of predefined external applications that depends on the installed applications.

note: i18n: ectx: property (whatsThis), widget (QCheckBox, m_checkSwapByteOrder)
en: <p> If this option is checked K3b will swap the byte order of the input data. Thus, the command has to read big endian audio frames.
    <p>If the resulting audio file sounds bad it is highly likely that the byte order is wrong and this option has to be checked.
en_GB: <p> If this option is ticked K3b will swap the byte order of the input data. Thus, the command has to read big endian audio frames.
    <p>If the resulting audio file sounds bad it is highly likely that the byte order is wrong and this option has to be ticked.

note: i18n: ectx: property (whatsThis), widget (QCheckBox, m_checkWriteWaveHeader)
en: <p>If this option is checked K3b will write a wave header. This is useful in case the encoder application cannot read plain raw audio data.
en_GB: <p>If this option is ticked K3b will write a wave header. This is useful in case the encoder application cannot read plain raw audio data.

note: i18n: ectx: property (whatsThis), widget (QCheckBox, m_checkISO)
en: <p>If this option is checked, LAME will enforce the 7680 bit limitation on total frame size.<br>
    This results in many wasted bits for high bitrate encodings but will ensure strict ISO compatibility. This compatibility might be important for hardware players.
en_GB: <p>If this option is ticked, LAME will enforce the 7680 bit limitation on total frame size.<br>
    This results in many wasted bits for high bitrate encodings but will ensure strict ISO compatibility. This compatibility might be important for hardware players.

note: i18n: ectx: property (whatsThis), widget (QCheckBox, m_checkError)
en: <p>If this option is checked, a cyclic redundancy check (CRC) code will be added to each frame, allowing transmission errors that could occur on the MP3 stream to be detected; however, it takes 16 bits per frame that would otherwise be used for encoding, thus slightly reducing the sound quality.
en_GB: <p>If this option is ticked, a cyclic redundancy check (CRC) code will be added to each frame, allowing transmission errors that could occur on the MP3 stream to be detected; however, it takes 16 bits per frame that would otherwise be used for encoding, thus slightly reducing the sound quality.

note: i18n: ectx: property (text), widget (QCheckBox, m_checkBitrateUpper)
en: &Upper bitrate:
en_GB: &Upper bit rate:

note: i18n: ectx: property (text), widget (QCheckBox, m_checkBitrateLower)
en: Lower &bitrate:
en_GB: Lower &bit rate:

note: i18n: ectx: property (text), widget (QCheckBox, m_checkBitrateNominal)
en: &Nominal bitrate:
en_GB: &Nominal bit rate:

note: i18n: ectx: property (whatsThis), widget (QComboBox, m_comboEncoding)
en: <p>The sample data encoding is signed linear (2's complement), unsigned linear, u-law (logarithmic), A-law (logarithmic), ADPCM, IMA_ADPCM, GSM, or Floating-point.</p>
    <p><b>U-law</b> (actually shorthand for mu-law) and <b>A-law</b> are the U.S. and international standards for logarithmic telephone sound compression. When uncompressed u-law has roughly the precision of 14-bit PCM audio and A-law has roughly the precision of 13-bit PCM audio. A-law and u-law data is sometimes encoded using a reversed bit-ordering (i.e. MSB becomes LSB).<br> <b>ADPCM </b> is a form of sound compression that has a good compromise between good sound quality and fast encoding/decoding time. It is used for telephone sound compression and places where full fidelity is not as important. When uncompressed it has roughly the precision of 16-bit PCM audio. Popular versions of ADPCM include G.726, MS ADPCM, and IMA ADPCM. It has different meanings in different file handlers. In .wav files it represents MS ADPCM files, in all others it means G.726 ADPCM. <br> <b>IMA ADPCM</b> is a specific form of ADPCM compression, slightly simpler and slightly lower fidelity than Microsoft's flavor of ADPCM. IMA ADPCM is also called DVI ADPCM.<br> <b>GSM</b> is a standard used for telephone sound compression in European countries and is gaining popularity because of its good quality. It is usually CPU intensive to work with GSM audio data.</p> <p><em>Description based on the SoX manpage</em></p>
en_GB: <p>The sample data encoding is signed linear (2's complement), unsigned linear, u-law (logarithmic), A-law (logarithmic), ADPCM, IMA_ADPCM, GSM, or Floating-point.</p>
    <p><b>U-law</b> (actually shorthand for µ-law) and <b>A-law</b> are the U.S. and international standards for logarithmic telephone sound compression. When uncompressed, µ-law has roughly the precision of 14-bit PCM audio and A-law has roughly the precision of 13-bit PCM audio. A-law and µ-law data is sometimes encoded using a reversed bit-ordering (i.e. MSB becomes LSB).<br> <b>ADPCM </b> is a form of sound compression that has a good compromise between good sound quality and fast encoding/decoding time. It is used for telephone sound compression and places where full fidelity is not as important. When uncompressed it has roughly the precision of 16-bit PCM audio. Popular versions of ADPCM include G.726, MS ADPCM, and IMA ADPCM. It has different meanings in different file handlers. In .wav files it represents MS ADPCM files, in all others it means G.726 ADPCM. <br> <b>IMA ADPCM</b> is a specific form of ADPCM compression, slightly simpler and slightly lower fidelity than Microsoft's flavour of ADPCM. IMA ADPCM is also called DVI ADPCM.<br> <b>GSM</b> is a standard used for telephone sound compression in European countries and is gaining popularity because of its good quality. It is usually CPU intensive to work with GSM audio data.</p> <p><em>Description based on the SoX manpage</em></p>

note: i18n: ectx: property (text), item, widget (QComboBox, m_comboEncoding)
en: u-law (logarithmic)
en_GB: µ-law (logarithmic)

en: &Format/Erase rewritable disk...
en_GB: &Format/Erase rewritable disc...

en: Open the rewritable disk formatting/erasing dialog
en_GB: Open the rewritable disc formatting/erasing dialogue

en: Open the media copy dialog
en_GB: Open the media copy dialogue

en: Waiting for Disk
en_GB: Waiting for Disc

en: <p>Saves the current settings of the action dialog.<p>These settings can be loaded with the <em>Load saved settings</em> button.<p><b>The K3b defaults are not overwritten by this.</b>
en_GB: <p>Saves the current settings of the action dialogue.<p>These settings can be loaded with the <em>Load saved settings</em> button.<p><b>The K3b defaults are not overwritten by this.</b>

en: Canceled.
en_GB: Cancelled.

en: Make sure HAL daemon is running, it is used by K3b for finding devices.
en_GB: Make sure HAL dæmon is running, it is used by K3b for finding devices.

en: Since Linux kernel 2.6.8 %1 will not work when run suid root for security reasons anymore.
en_GB: Since Linux kernel 2.6.8 %1 will not work when run suid root for security reasons any more.

en: <em>Disk At Once</em> or more properly <em>Session At Once</em>. The laser is never turned off while writing the CD or DVD. This is the preferred mode to write audio CDs since it allows pregaps other than 2 seconds. Not all writers support DAO.<br>DVD-R(W)s written in DAO provide the best DVD-Video compatibility.
en_GB: <em>Disc At Once</em> or more properly <em>Session At Once</em>. The laser is never turned off while writing the CD or DVD. This is the preferred mode to write audio CDs since it allows pregaps other than 2 seconds. Not all writers support DAO.<br>DVD-R(W)s written in DAO provide the best DVD-Video compatibility.

en: Open the project burn dialog for the current project
en_GB: Open the project burn dialogue for the current project

en: Open the copy dialog, optionally specify the source device
en_GB: Open the copy dialogue, optionally specify the source device

en: Type of image file is not recognizable. Do you want to burn it anyway?
en_GB: Type of image file is not recognisable. Do you want to burn it anyway?

en: Calculation canceled
en_GB: Calculation cancelled

en: <p>If this option is checked K3b will disable the source drive's ECC/EDC error correction. This way sectors that are unreadable by intention can be read.<p>This may be useful for cloning CDs with copy protection based on corrupted sectors.
en_GB: <p>If this option is ticked K3b will disable the source drive's ECC/EDC error correction. This way sectors that are unreadable by intention can be read.<p>This may be useful for cloning CDs with copy protection based on corrupted sectors.

en: <p>If this option is checked K3b will search for CD-Text on the source CD. Disable it if your CD drive has problems with reading CD-Text or you want to stick to CDDB info.
en_GB: <p>If this option is ticked K3b will search for CD-Text on the source CD. Disable it if your CD drive has problems with reading CD-Text or you want to stick to CDDB info.

en: <p>If this option is checked and K3b is not able to read a data sector from the source medium it will be replaced with zeros on the resulting copy.
en_GB: <p>If this option is ticked and K3b is not able to read a data sector from the source medium it will be replaced with zeros on the resulting copy.

en: <p>If this option is checked K3b will format a DVD-RW even if it is empty. It may also be used to force K3b to format a DVD+RW, BD-RE or a DVD-RW in restricted overwrite mode.<p><b>Caution:</b> It is not recommended to format a DVD often as it may become unusable after only 10-20 reformat procedures.<p>DVD+RW and BD-RE media only needs to be formatted once. After that it just needs to be overwritten. The same applies to DVD-RW in restricted overwrite mode.
en_GB: <p>If this option is ticked K3b will format a DVD-RW even if it is empty. It may also be used to force K3b to format a DVD+RW, BD-RE or a DVD-RW in restricted overwrite mode.<p><b>Caution:</b> It is not recommended to format a DVD often as it may become unusable after only 10-20 reformat procedures.<p>DVD+RW and BD-RE media only needs to be formatted once. After that it just needs to be overwritten. The same applies to DVD-RW in restricted overwrite mode.

en: <p>If this option is checked K3b will tell the writer to perform a quick format.<p>Erasing a rewritable medium completely can take a very long time and some writers perform a full format even if quick format is enabled.
en_GB: <p>If this option is ticked K3b will tell the writer to perform a quick format.<p>Erasing a rewritable medium completely can take a very long time and some writers perform a full format even if quick format is enabled.

note: i18n: ectx: property (whatsThis), widget (KUrlRequester, m_editTempDir)
en: <p>This is the default temporary directory. This is where K3b will store temporary files such as iso images or decoded audio files.<p>Be aware that the temporary directory may also be changed in every project burn dialog.
en_GB: <p>This is the default temporary directory. This is where K3b will store temporary files such as iso images or decoded audio files.<p>Be aware that the temporary directory may also be changed in every project burn dialogue.

note: i18n: ectx: property (whatsThis), widget (QCheckBox, m_checkSystemConfig)
en: <p>If this option is checked K3b will check the system configuration for any problems on startup and when the user changes the settings.
en_GB: <p>If this option is ticked K3b will check the system configuration for any problems on startup and when the user changes the settings.

note: i18n: ectx: property (whatsThis), widget (QCheckBox, m_checkShowProgressOSD)
en: <p>If this option is checked K3b will display the progress in KDE notification area. If K3b is run outside KDE environment a separate progress window may be shown instead.</p>
en_GB: <p>If this option is ticked K3b will display the progress in KDE notification area. If K3b is run outside KDE environment a separate progress window may be shown instead.</p>

note: i18n: ectx: property (whatsThis), widget (QCheckBox, m_checkHideMainWindowWhileWriting)
en: <p>If this option is checked K3b will hide the main window while displaying the progress dialog.
en_GB: <p>If this option is ticked K3b will hide the main window while displaying the progress dialogue.

note: i18n: ectx: property (toolTip), widget (QCheckBox, m_checkKeepDialogsOpen)
en: Do not close action dialogs after finishing the process
en_GB: Do not close action dialogues after finishing the process

note: i18n: ectx: property (whatsThis), widget (QCheckBox, m_checkKeepDialogsOpen)
en: <p>If this option is checked K3b will not close action dialogs such as the CD Copy dialog after the process has been finished. It will be kept open to start a new process, for instance, copying another CD.
en_GB: <p>If this option is ticked K3b will not close action dialogues such as the CD Copy dialogue after the process has been finished. It will be kept open to start a new process, for instance, copying another CD.

note: i18n: ectx: property (text), widget (QCheckBox, m_checkKeepDialogsOpen)
en: &Keep action dialogs open
en_GB: &Keep action dialogues open

note: i18n: ectx: property (text), widget (QLabel, textLabel1_3)
en: &Default action dialog settings:
en_GB: &Default action dialogue settings:

note: i18n: ectx: property (toolTip), widget (K3b::IntMapComboBox, m_comboActionDialogSettings)
en: Settings to load when opening an action dialog
en_GB: Settings to load when opening an action dialogue

en: <p>If this option is checked additional GUI elements which allow one to influence the behavior of K3b are shown. This includes the manual selection of the used burning tool. (Choose between cdrecord and cdrdao when writing a CD or between cdrecord and growisofs when writing a DVD/BD.)<p><b>Be aware that K3b does not support all possible tools in all project types and actions.</b>
en_GB: <p>If this option is checked additional GUI elements which allow one to influence the behaviour of K3b are shown. This includes the manual selection of the used burning tool. (Choose between cdrecord and cdrdao when writing a CD or between cdrecord and growisofs when writing a DVD/BD.)<p><b>Be aware that K3b does not support all possible tools in all project types and actions.</b>

en: <p>Each medium has an official maximum capacity which is stored in a read-only area of the medium and is guaranteed by the vendor. However, this official maximum is not always the actual maximum. Many media have an actual total capacity that is slightly larger than the official amount.<p>If this option is checked K3b will disable a safety check that prevents burning beyond the official capacity.<p><b>Caution:</b> Enabling this option can cause failures in the end of the burning process if K3b attempts to write beyond the official capacity. It makes sense to first determine the actual maximum capacity of the media brand with a simulated burn.
en_GB: <p>Each medium has an official maximum capacity which is stored in a read-only area of the medium and is guaranteed by the vendor. However, this official maximum is not always the actual maximum. Many media have an actual total capacity that is slightly larger than the official amount.<p>If this option is ticked K3b will disable a safety check that prevents burning beyond the official capacity.<p><b>Caution:</b> Enabling this option can cause failures in the end of the burning process if K3b attempts to write beyond the official capacity. It makes sense to first determine the actual maximum capacity of the media brand with a simulated burn.

en: <p>If this option is checked K3b will automatically erase CD-RWs and format DVD-RWs if one is found instead of an empty media before writing.
en_GB: <p>If this option is ticked K3b will automatically erase CD-RWs and format DVD-RWs if one is found instead of an empty media before writing.

en: <p>K3b uses a software buffer during the burning process to avoid gaps in the data stream due to high system load. The default sizes used are %1 MB for CD and %2 MB for DVD burning.<p>If this option is checked the value specified will be used for both CD and DVD burning.
en_GB: <p>K3b uses a software buffer during the burning process to avoid gaps in the data stream due to high system load. The default sizes used are %1 MB for CD and %2 MB for DVD burning.<p>If this option is ticked the value specified will be used for both CD and DVD burning.

en: <p>If this option is checked K3b will not eject the medium once the burn process finishes. This can be helpful in case one leaves the computer after starting the burning and does not want the tray to be open all the time.<p>However, on Linux systems a freshly burned medium has to be reloaded. Otherwise the system will not detect the changes and still treat it as an empty medium.
en_GB: <p>If this option is ticked K3b will not eject the medium once the burn process finishes. This can be helpful in case one leaves the computer after starting the burning and does not want the tray to be open all the time.<p>However, on Linux systems a freshly burned medium has to be reloaded. Otherwise the system will not detect the changes and still treat it as an empty medium.

en: <p>If this option is checked K3b will continue in some situations which would otherwise be deemed as unsafe.<p>This setting for example disables the check for medium speed verification. Thus, one can force K3b to burn a high speed medium on a low speed writer.<p><b>Caution:</b> Enabling this option may result in damaged media.
en_GB: <p>If this option is ticked K3b will continue in some situations which would otherwise be deemed as unsafe.<p>This setting for example disables the check for medium speed verification. Thus, one can force K3b to burn a high speed medium on a low speed writer.<p><b>Caution:</b> Enabling this option may result in damaged media.

en: <p>If K3b finds more than one installed version of a program it will choose one as the <em>default</em>, which will be used to do the work. If you want to change the default, check desired version on the list.
en_GB: <p>If K3b finds more than one installed version of a program it will choose one as the <em>default</em>, which will be used to do the work. If you want to change the default, tick desired version on the list.

en: Load the K3b Defaults at dialog startup.
en_GB: Load the K3b Defaults at dialogue startup.

en: Load the settings saved by the user at dialog startup.
en_GB: Load the settings saved by the user at dialogue startup.

en: Load the last used settings at dialog startup.
en_GB: Load the last used settings at dialogue startup.

en: K3b handles three sets of settings in action dialogs (action dialogs include the CD Copy dialog or the Audio CD project dialog):
en_GB: K3b handles three sets of settings in action dialogues (action dialogues include the CD Copy dialogue or the Audio CD project dialogue):

en: One of these sets is loaded once an action dialog is opened. This setting defines which set it will be.
en_GB: One of these sets is loaded once an action dialogue is opened. This setting defines which set it will be.

note: i18n: ectx: property (whatsThis), widget (QCheckBox, m_checkPreservePermissions)
en: <p>If this option is checked, all files in the resulting file system will have exactly the same permissions as the source files. (Otherwise, all files will have equal permissions and be owned by root).
    <p>This is mainly useful for backups.<p><b>Caution:</b> The permissions may not make much sense on other file systems; for example, if a user that owns a file on the CD or DVD does not exist.
en_GB: <p>If this option is ticked, all files in the resulting file system will have exactly the same permissions as the source files. (Otherwise, all files will have equal permissions and be owned by root).
    <p>This is mainly useful for backups.<p><b>Caution:</b> The permissions may not make much sense on other file systems; for example, if a user that owns a file on the CD or DVD does not exist.

note: i18n: ectx: property (text), widget (QLabel, textLabel7)
en: &Disk id:
en_GB: &Disc id:

note: i18n: ectx: property (whatsThis), widget (QGroupBox, m_groupCdText)
en: <p><b>CD-Text</b>
    <p>If this option is checked K3b uses some otherwise unused space on the Audio CD to store additional information, such as the artist's name or the CD title.
    <p>CD-Text is an extension to the audio CD standard introduced by Sony.
    <p>CD-Text will only be usable on CD players that support this extension (mostly car CD players) and software like K3b, of course.
    <p>Since a CD-Text-enhanced Audio CD will work in any Hifi CD or DVD player even if the player does not support CD-Text explicitly, enabling it is never a bad idea (just remember to fill in the CD-Text information).
en_GB: <p><b>CD-Text</b>
    <p>If this option is ticked K3b uses some otherwise unused space on the Audio CD to store additional information, such as the artist's name or the CD title.
    <p>CD-Text is an extension to the audio CD standard introduced by Sony.
    <p>CD-Text will only be usable on CD players that support this extension (mostly car CD players) and software like K3b, of course.
    <p>Since a CD-Text-enhanced Audio CD will work in any Hifi CD or DVD player even if the player does not support CD-Text explicitly, enabling it is never a bad idea (just remember to fill in the CD-Text information).

note: i18n: ectx: property (text), widget (QLabel, textLabel2)
en: Boot catalog:
en_GB: Boot catalogue:

note: i18n: ectx: property (whatsThis), widget (QComboBox, m_comboSpaceHandling)
en: <p><b>No Change</b><br>
    If this option is checked, K3b will leave all spaces in filenames as they are.
    <p><b>Strip</b><br>
    If this option is checked, K3b will remove all spaces from all filenames.<br>
    Example: 'my good file.ext' becomes 'mygoodfile.ext'
    <p><b>Extended Strip</b><br>
    If this option is checked K3b will remove all spaces in all filenames and capitalize all letters following a space.<br>
    Example: 'my good file.ext' becomes 'myGoodFile.ext'
    <p><b>Replace</b><br>
    If this option is checked, K3b will replace all spaces in all filenames with the specified characters.<br>
    Example: 'my good file.ext' becomes 'my_good_file.ext'
en_GB: <p><b>No Change</b><br>
    If this option is ticked, K3b will leave all spaces in filenames as they are.
    <p><b>Strip</b><br>
    If this option is ticked, K3b will remove all spaces from all filenames.<br>
    Example: 'my good file.ext' becomes 'mygoodfile.ext'
    <p><b>Extended Strip</b><br>
    If this option is ticked K3b will remove all spaces in all filenames and capitalise all letters following a space.<br>
    Example: 'my good file.ext' becomes 'myGoodFile.ext'
    <p><b>Replace</b><br>
    If this option is ticked, K3b will replace all spaces in all filenames with the specified characters.<br>
    Example: 'my good file.ext' becomes 'my_good_file.ext'

note: i18n: ectx: property (whatsThis), widget (QCheckBox, m_checkRandomPlay)
en: <p>If this option is checked the order in which the files are played is determined randomly every time it is played.
en_GB: <p>If this option is ticked the order in which the files are played is determined randomly every time it is played.

note: i18n: ectx: property (whatsThis), widget (QCheckBox, m_checkNoDma)
en: <p>If this option is checked the resulting eMovix CD/DVD will not use DMA for accessing the drive. This will slow down reading from the CD/DVD but may be necessary on some systems that do not support DMA.</p>
en_GB: <p>If this option is ticked the resulting eMovix CD/DVD will not use DMA for accessing the drive. This will slow down reading from the CD/DVD but may be necessary on some systems that do not support DMA.</p>

note: i18n: ectx: property (title), widget (QGroupBox, groupBox3)
en: Startup Behavior
en_GB: Startup Behaviour

note: i18n: ectx: property (title), widget (QGroupBox, groupBox1)
en: Behavior After Playing
en_GB: Behaviour After Playing

note: i18n: ectx: property (toolTip), widget (QCheckBox, m_checkEject)
en: Eject the disk after playing has finished
en_GB: Eject the disc after playing has finished

note: i18n: ectx: property (whatsThis), widget (QCheckBox, m_checkEject)
en: <p>If this option is checked the disk will be ejected after MPlayer has finished.
en_GB: <p>If this option is ticked the disc will be ejected after MPlayer has finished.

note: i18n: ectx: property (text), widget (QCheckBox, m_checkEject)
en: E&ject disk
en_GB: E&ject disc

note: i18n: ectx: property (whatsThis), widget (QCheckBox, m_checkShutdown)
en: <p>If this option is checked the PC will be shut down after MPlayer has finished playing.
en_GB: <p>If this option is ticked the PC will be shut down after MPlayer has finished playing.

note: i18n: ectx: property (whatsThis), widget (QCheckBox, m_checkReboot)
en: <p>If this option is checked the PC will be rebooted after MPlayer has finished playing.
en_GB: <p>If this option is ticked the PC will be rebooted after MPlayer has finished playing.

en: <p>If this option is checked K3b will <em>hide</em> the first track.<p>The audio CD standard uses pregaps before every track on the CD. By default these last for 2 seconds and are silent. In DAO mode it is possible to have longer pregaps that contain some audio. In this case the first pregap will contain the complete first track.<p>You will need to seek back from the beginning of the CD to listen to the first track. Try it, it is quite amusing.<p><b>This feature is only available in DAO mode when writing with cdrdao.
en_GB: <p>If this option is ticked K3b will <em>hide</em> the first track.<p>The audio CD standard uses pregaps before every track on the CD. By default these last for 2 seconds and are silent. In DAO mode it is possible to have longer pregaps that contain some audio. In this case the first pregap will contain the complete first track.<p>You will need to seek back from the beginning of the CD to listen to the first track. Try it, it is quite amusing.<p><b>This feature is only available in DAO mode when writing with cdrdao.

en: <p><b>External program <em>normalize</em> is not installed.</b><p>K3b uses <em>normalize</em> (http://normalize.nongnu.org/) to normalize audio tracks. In order to use this functionality, please install it first.
en_GB: <p><b>External program <em>normalize</em> is not installed.</b><p>K3b uses <em>normalize</em> (http://normalize.nongnu.org/) to normalise audio tracks. In order to use this functionality, please install it first.

en: <p>K3b is not able to normalize audio tracks when burning on-the-fly. The external program used for this task only supports normalizing a set of audio files.
en_GB: <p>K3b is not able to normalise audio tracks when burning on-the-fly. The external program used for this task only supports normalizing a set of audio files.

en: Disable normalization
en_GB: Disable normalisation

en: The file system is optimized for usage on Linux/Unix systems. This mainly means that it uses the Rock Ridge extensions to provide long filenames, symbolic links, and POSIX compatible file permissions.
en_GB: The file system is optimised for usage on Linux/Unix systems. This mainly means that it uses the Rock Ridge extensions to provide long filenames, symbolic links, and POSIX compatible file permissions.

en: The file system is optimized for compatibility with old systems. That means file names are restricted to 8.3 characters and no symbolic links or file permissions are supported.
en_GB: The file system is optimised for compatibility with old systems. That means file names are restricted to 8.3 characters and no symbolic links or file permissions are supported.

en: <p><b>Multisession Mode</b><p><b>Auto</b><br>Let K3b decide which mode to use. The decision will be based on the size of the project (does it fill the whole media) and the state of the inserted media (appendable or not).<p><b>No Multisession</b><br>Create a single-session CD or DVD and close the disk.<p><b>Start Multisession</b><br>Start a multisession CD or DVD, not closing the disk to allow further sessions to be appended.<p><b>Continue Multisession</b><br>Continue an appendable data CD (as for example created in <em>Start Multisession</em> mode) and add another session without closing the disk to allow further sessions to be appended.<p><b>Finish Multisession</b><br>Continue an appendable data CD (as for example created in <em>Start Multisession</em> mode), add another session, and close the disk.<p><em>In the case of DVD+RW and DVD-RW restricted overwrite media K3b will not actually create multiple sessions but grow the file system to include the new data.</em>
en_GB: <p><b>Multisession Mode</b><p><b>Auto</b><br>Let K3b decide which mode to use. The decision will be based on the size of the project (does it fill the whole media) and the state of the inserted media (appendable or not).<p><b>No Multisession</b><br>Create a single-session CD or DVD and close the disk.<p><b>Start Multisession</b><br>Start a multisession CD or DVD, not closing the disc to allow further sessions to be appended.<p><b>Continue Multisession</b><br>Continue an appendable data CD (as for example created in <em>Start Multisession</em> mode) and add another session without closing the disk to allow further sessions to be appended.<p><b>Finish Multisession</b><br>Continue an appendable data CD (as for example created in <em>Start Multisession</em> mode), add another session, and close the disc.<p><em>In the case of DVD+RW and DVD-RW restricted overwrite media K3b will not actually create multiple sessions but grow the file system to include the new data.</em>

en: <p>If this option is checked, the file or folder (and its entire contents) will be hidden on the ISO 9660 and RockRidge filesystem.</p><p>This is useful, for example, for having different README files for RockRidge and Joliet, which can be managed by hiding README.joliet on RockRidge and README.rr on the Joliet filesystem.</p>
en_GB: <p>If this option is ticked, the file or folder (and its entire contents) will be hidden on the ISO 9660 and RockRidge filesystem.</p><p>This is useful, for example, for having different README files for RockRidge and Joliet, which can be managed by hiding README.joliet on RockRidge and README.rr on the Joliet filesystem.</p>

en: <p>If this option is checked, the file or folder (and its entire contents) will be hidden on the Joliet filesystem.</p><p>This is useful, for example, for having different README files for RockRidge and Joliet, which can be managed by hiding README.joliet on RockRidge and README.rr on the Joliet filesystem.</p>
en_GB: <p>If this option is ticked, the file or folder (and its entire contents) will be hidden on the Joliet filesystem.</p><p>This is useful, for example, for having different README files for RockRidge and Joliet, which can be managed by hiding README.joliet on RockRidge and README.rr on the Joliet filesystem.</p>

en: <p>This value modifies the physical sort order of the files in the ISO 9660 filesystem. A higher weighting means that the file will be located closer to the beginning of the image (and the disk).<p>This option is useful in order to optimize the data layout on a medium.<p><b>Caution:</b> This does not sort the order of the file names that appear in the ISO 9660 folder. It sorts the order in which the file data is written to the image.
en_GB: <p>This value modifies the physical sort order of the files in the ISO 9660 filesystem. A higher weighting means that the file will be located closer to the beginning of the image (and the disk).<p>This option is useful in order to optimise the data layout on a medium.<p><b>Caution:</b> This does not sort the order of the file names that appear in the ISO 9660 folder. It sorts the order in which the file data is written to the image.

en: Do you also want to add system files (FIFOs, sockets, device files, and broken symlinks)?
en_GB: Do you also want to add system files (FIFOs, sockets, device files and broken symlinks)?

en: <em>Blue book CD</em><br>K3b will create a multisession CD with 2 sessions. The first session will contain all audio tracks and the second session will contain a mode 2 form 1 data track.<br>This mode is based on the <em>Blue book</em> standard (also known as <em>Extended Audio CD</em>, <em>CD-Extra</em>, or <em>CD Plus</em>) and has the advantage that a hifi audio CD player will only recognize the first session and ignore the second session with the data track.<br>If the CD is intended to be used in a hifi audio CD player this is the recommended mode.<br>Some older CD-ROMs may have problems reading a blue book CD since it is a multisession CD.
en_GB: <em>Blue book CD</em><br>K3b will create a multisession CD with 2 sessions. The first session will contain all audio tracks and the second session will contain a mode 2 form 1 data track.<br>This mode is based on the <em>Blue book</em> standard (also known as <em>Extended Audio CD</em>, <em>CD-Extra</em>, or <em>CD Plus</em>) and has the advantage that a hifi audio CD player will only recognise the first session and ignore the second session with the data track.<br>If the CD is intended to be used in a hifi audio CD player this is the recommended mode.<br>Some older CD-ROMs may have problems reading a blue book CD since it is a multisession CD.

en: Saves the settings to the project and closes the dialog.
en_GB: Saves the settings to the project and closes the dialogue.

en: Discards all changes made in the dialog and closes it.
en_GB: Discards all changes made in the dialogue and closes it.

en: This option allows customization of Gaps and Margins.
en_GB: This option allows customisation of Gaps and Margins.

en: <p>Configuration parameters only available for Video CD 2.0<p>The engine works perfectly well when used as-is.<p>You have the option to configure the VCD application.<p>You can adapt the color and/or the shape of the cursor and lots more.
en_GB: <p>Configuration parameters only available for Video CD 2.0<p>The engine works perfectly well when used as-is.<p>You have the option to configure the VCD application.<p>You can adapt the colour and/or the shape of the cursor and lots more.

en: <p>This option allows customization of Gaps and Margins.
en_GB: <p>This option allows customisation of Gaps and Margins.

en: Customize gaps and margins
en_GB: Customise gaps and margins

en: Open the burn dialog for the current project
en_GB: Open the burn dialogue for the current project

en: Open the properties dialog
en_GB: Open the properties dialogue

note: i18n: ectx: property (whatsThis), widget (QCheckBox, m_checkCreatePlaylist)
en: <p>If this option is checked K3b will create a playlist of the ripped files
    which can be used with programs like Amarok or JuK.
    <p>You may use the special strings to give the playlist a unique filename.
en_GB: <p>If this option is ticked K3b will create a playlist of the ripped files
    which can be used with programs like Amarok or JuK.
    <p>You may use the special strings to give the playlist a unique filename.

note: i18n: ectx: property (whatsThis), widget (QCheckBox, m_checkPlaylistRelative)
en: <p>If this option is checked, the entries in the playlist will be relative to its location.
    <p>Example: If your playlist is located in <em>/home/myself/music</em> and
    your audio files are in <em>/home/myself/music/cool</em>; then the entries in the
    playlist will look something like: <em>cool/track1.ogg</em>.
en_GB: <p>If this option is ticked, the entries in the playlist will be relative to its location.
    <p>Example: If your playlist is located in <em>/home/myself/music</em> and
    your audio files are in <em>/home/myself/music/cool</em>; then the entries in the
    playlist will look something like: <em>cool/track1.ogg</em>.

note: i18n: ectx: property (whatsThis), widget (QCheckBox, m_checkSingleFile)
en: <p>If this option is checked K3b will create only one
    audio file no matter how many tracks are ripped. This
    file will contain all tracks one after the other.
    <p>This might be useful to rip a live album or a radio play.
    <p><b>Caution:</b> The file will have the name made from playlist pattern.
en_GB: <p>If this option is ticked K3b will create only one
    audio file no matter how many tracks are ripped. This
    file will contain all tracks one after the other.
    <p>This might be useful to rip a live album or a radio play.
    <p><b>Caution:</b> The file will have the name made from playlist pattern.

en: Check Track
en_GB: Tick Track

en: Check Tracks
en_GB: Tick Tracks

en: Uncheck Track
en_GB: Untick Track

en: Uncheck Tracks
en_GB: Untick Tracks

en: Error while initializing audio ripping.
en_GB: Error while initialising audio ripping.

en: <p>If this option is checked K3b will not rip the audio data in the pregaps. Most audio tracks contain an empty pregap which does not belong to the track itself.</p><p>Although the default behavior of nearly all ripping software is to include the pregaps for most CDs, it makes more sense to ignore them. In any case, when creating a K3b audio project, the pregaps will be regenerated.</p>
en_GB: <p>If this option is ticked K3b will not rip the audio data in the pregaps. Most audio tracks contain an empty pregap which does not belong to the track itself.</p><p>Although the default behaviour of nearly all ripping software is to include the pregaps for most CDs, it makes more sense to ignore them. In any case, when creating a K3b audio project, the pregaps will be regenerated.</p>

en: Job canceled by user.
en_GB: Job cancelled by user.

en: <p>This option only makes sense if you are reading from a BIN CD disk image. This indicates to `vcdxrip' to assume a 2336-byte sector mode for image file.</p><b>Note: This option is slated to disappear.</b>
en_GB: <p>This option only makes sense if you are reading from a BIN CD disc image. This indicates to `vcdxrip' to assume a 2336-byte sector mode for image file.</p><b>Note: This option is slated to disappear.</b>

en: Check All
en_GB: Tick All

en: Uncheck All
en_GB: Untick All

note: i18n: ectx: property (whatsThis), widget (QCheckBox, m_checkTwoPassEncoding)
en: <p>If this option is checked K3b encodes the video titles in two passes. The first pass is used to gather information about the video in order to improve the distribution of bits in the second pass. The resulting video will have a higher quality using a variable bitrate.
    <p>If this option is not checked K3b will create video files with a constant bitrate and a lower quality.
    <p>2-pass encoding results in a doubled encoding time.
en_GB: <p>If this option is ticked K3b encodes the video titles in two passes. The first pass is used to gather information about the video in order to improve the distribution of bits in the second pass. The resulting video will have a higher quality using a variable bitrate.
    <p>If this option is not ticked K3b will create video files with a constant bitrate and a lower quality.
    <p>2-pass encoding results in a doubled encoding time.

note: i18n: ectx: property (whatsThis), widget (QCheckBox, m_checkAutoClipping)
en: <p>Most Video DVDs are encoded in a letterboxed format. <em>Letterboxed</em> refers to black bars used at the top and bottom (and sometimes at the sides) of the video to force it into one of the aspect ratios supported by the Video DVD standard.
    <p>If this option is checked K3b will automatically detect and remove these black bars from the resulting video.
    <p>Although this method is very reliable there may be problems if the source material is exceptionally short or dark.
en_GB: <p>Most Video DVDs are encoded in a letterboxed format. <em>Letterboxed</em> refers to black bars used at the top and bottom (and sometimes at the sides) of the video to force it into one of the aspect ratios supported by the Video DVD standard.
    <p>If this option is ticked K3b will automatically detect and remove these black bars from the resulting video.
    <p>Although this method is very reliable there may be problems if the source material is exceptionally short or dark.

note: i18n: ectx: property (whatsThis), widget (QCheckBox, m_checkAudioResampling)
en: <p>Video DVD audio streams normally are encoded with a sampling rate of 48000 Hz. Audio CDs on the other hand are encoded with a sampling rate of 44100 Hz.
    <p>If this option is checked K3b will change the sampling rate of the audio stream to 44100 Hz.
en_GB: <p>Video DVD audio streams normally are encoded with a sampling rate of 48000 Hz. Audio CDs on the other hand are encoded with a sampling rate of 44100 Hz.
    <p>If this option is ticked K3b will change the sampling rate of the audio stream to 44100 Hz.

en: Open the Video DVD ripping dialog
en_GB: Open the Video DVD ripping dialogue
