Import dhcpcd-10.0.6 with the following changes:

* privsep: Stop proxying stderr to console and fix some detachment issues
* non-privsep: Fix launcher hangup
* DHCP6: Allow the invalid interface

Import dhcpcd-10.0.6 with the following changes:

* privsep: Stop proxying stderr to console and fix some detachment issues
* non-privsep: Fix launcher hangup
* DHCP6: Allow the invalid interface name - to mean don't assign an address from a delegated prefix
* DHCP6: Load the configuration for the interface being activated from prefix delegation

show more ...

Update to dhcpcd-10.0.1 with the following changes:

* privsep: keep resources open rather than open/close
* dhcp6: OPTION_NTP_SERVER is now preferred over OPTION_SNTP_SERVER
* Misc bug fixes main

Update to dhcpcd-10.0.1 with the following changes:

* privsep: keep resources open rather than open/close
* dhcp6: OPTION_NTP_SERVER is now preferred over OPTION_SNTP_SERVER
* Misc bug fixes mainly around privsep for many platforms.
* Fix for reading the some BSD routing table entries.
* Fix reading authtokens from config.

show more ...

Update to dhcpcd-9.4.1 with the following changes:

* BSD: Find the correct interface for tunnelled routes
* OpenBSD: Fix uniqueness of routes for matching priorities
* Linux: Support more platfor

Update to dhcpcd-9.4.1 with the following changes:

* BSD: Find the correct interface for tunnelled routes
* OpenBSD: Fix uniqueness of routes for matching priorities
* Linux: Support more platforms for seccomp (thanks to Fabrice Fontaine)
* eloop: Process all waiting fd's as they come in
* control: Unlink sockets when not in privsep
* privsep: Renamed Master to Manager
* privsep: Renamed Privilged Actioneer to Privileged Proxy
* privsep: Fix getting interface VLANID on BSD
* privsep: Enforce proper alignment of serialized struct cmsghdr
* IPv4LL: Don't remove statically assigned addresses
* routes: Fix route comparision for network prefixes with different masks
* DHCP6: Only send FQDN for SOLICIT, REQUEST, RENEW, or REBIND messages
* DHCP6: Don't spam the log when a RA repeatedly triggers an INFORM
* DHCP: Fix infinite INFORM messages

show more ...

Update to dhcpcd-9.4.0 with the following changes:

* DHCP: For anonymous, just use a generic ClientID
* link: Split hardware address randomisation out of anonymous option
* link: Only report hard

Update to dhcpcd-9.4.0 with the following changes:

* DHCP: For anonymous, just use a generic ClientID
* link: Split hardware address randomisation out of anonymous option
* link: Only report hardware changes for active interfaces
* link: Report errors obtaining recv buffer size on overflow
* hooks: Add NOCARRIER_ROAMING reason
* hooks: interface_order now reflects priorities again

show more ...

dhcpcd: Update to dhcpcd-9.3.3 with the following changes:

* dhcpcd: Don't create a launcher process if keeping in foreground
* dhcpcd: Add --noconfigure option
* control: Create an unpriv socket

dhcpcd: Update to dhcpcd-9.3.3 with the following changes:

* dhcpcd: Don't create a launcher process if keeping in foreground
* dhcpcd: Add --noconfigure option
* control: Create an unpriv socket for non master mode
* options: Don't log unknown ones when printing pidfile location

show more ...

Update to dhcpcd-9.2.0 with the following changes:

* route: ensure IPv4LL routes come last in priority
* DHCP: fix many issues with extending the last lease
* privsep: don't read control group fr

Update to dhcpcd-9.2.0 with the following changes:

* route: ensure IPv4LL routes come last in priority
* DHCP: fix many issues with extending the last lease
* privsep: don't read control group from config in privsep
* privsep: only the master process responds to signals
* privsep: use a socketpair for stderr/stdin rather than dupping /dev/null
* privsep: right limit stdin/stderr/stdout
* privsep: dumping a lease is now run in a sandbox
* options: check if kernel supports INET or INET6 before enabling default
* options: let clientid override a prior duid
* options: allow -1 to represent infinity for requested lease time
* dhcpcd: fix a crash initing a new interface after route overflow

show more ...

Update to dhcpcd-9.1.2 with the following changes:

* BSD: Only mark static routes from dhcpcd.conf as static
* DHCP6: Ensure requested addresses are requested
* DHCP6: Fix prefix length calculati

Update to dhcpcd-9.1.2 with the following changes:

* BSD: Only mark static routes from dhcpcd.conf as static
* DHCP6: Ensure requested addresses are requested
* DHCP6: Fix prefix length calculation when no prefix specified

* privsep: Implement a resource limited sandbox

You will see a control proxy process now.
This is for the resource limited sandbox so that we can isolate
requests over the control socket.
For NetBSD, FreeBSD and derivatives such as DragonFlyBSD this is a massive win
as these OS now enjoy a similar level of protection as Capsicum or Pledge,
but without the syscall filtering.

show more ...

Update to dhcpcd-9.1.0 with the following changes:

* Leases are stored outside the chroot again
* The chroot directory can now be (and should be) empty [1]
* BPF: set write filters when supported

Update to dhcpcd-9.1.0 with the following changes:

* Leases are stored outside the chroot again
* The chroot directory can now be (and should be) empty [1]
* BPF: set write filters when supported
* ARP is now per address rather than per interface
* Filter allowed ioctls in the privileged actioneer
* Filter allowed UDP ports used by sendto(2) in the privileged actioneer
* Filter allowed file paths in the privileged actioneer
* route socket is now drained on overflow as it cannot be
re-opened by the unpriviledged user

* hostname can no longer be clobbered by SLAAC
* grep is no longer used by the test hook
* Interface hardware address type changes are now picked up
* Fixed some RA timing issues
* Fixed nd_* option parsing in dhcpcd.conf
* Allow SIGPIPE in scripts
* Default dhcpcd.conf no longer sends the current hostname
* Default dhcpcd.conf no longer sends a vendorclassid

show more ...

Import dhcpcd-9.0.0 with the following changes:

* inet: Allow forcing a host route from an interface without a lease
* dhcpcd: Don't wait for an address family to complete if not using it

* INET

Import dhcpcd-9.0.0 with the following changes:

* inet: Allow forcing a host route from an interface without a lease
* dhcpcd: Don't wait for an address family to complete if not using it

* INET6: Support a /128 prefix advertised via RA
* BSD: More address validation from route(4) messages
* DHCP: Fix a potential segfault on DaD failure
* IPv4LL: Fix a potential segfault when dropping IPv4LL addresses

* Decode interface complex interface names eth0.100:2 eth0i100:2.
This allows us to ignore some virtual interfaces by default
* ARP: Report L2 header address on conflict for more clarity
* DHCP: Support jumbo frames (untested)
* DHCP6: Clean up old lease on failure to confirm/rebind, etc
* RA: Prefer older routers
* INET6: Obscure prefixes are now calculated correctly

* Privilege Separation
* Default hostname is now a blank string
* Leases are now dumped over the control socket - you get RA's now as well.
* Better support for many IPv6 routers
* RA: Deprecate stale addresses by setting pltime 0
* DHCP6: Deprecate stale addresses by setting pltime 0

show more ...

Import dhcpcd-8.1.0 to vendor branch with the following changes:

* Fix carrier status after a route socket overflow
* Allow domain spaced options
* DHCP: Allow not sending Force Renew Nonce or Re

Import dhcpcd-8.1.0 to vendor branch with the following changes:

* Fix carrier status after a route socket overflow
* Allow domain spaced options
* DHCP: Allow not sending Force Renew Nonce or Reconf Accept
* IPv4LL: Now passes Apple Bonjour test versions 1.4 and 1.5
* ARP: Fix a typo and remove pragma (thus working with old gcc)
* DHCP6: Fix a cosmetic issue with infinite leases
* DHCP6: SLA 0 and Prefix Len 0 will now add a delegatd /64 address
* Ignore some virtual interfaces such as Tap and Bridge by default
* BPF: Move validation logic out of BPF and back into dhcpcd

show more ...

Import dhcpcd-8.0.4 to vendor branch.

Import dhcpcd 7.0.8

Version: 7.0.8
Date: 2018 August 20
URL: https://github.com/rsmarples/dhcpcd/releases
Homepage: https://roy.marples.name/projects/dhcpcd

Update to dhcpcd-9.4.1 with the following changes:

* BSD: Find the correct interface for tunnelled routes
* OpenBSD: Fix uniqueness of routes for matching priorities
* Linux: Support more platfor

Update to dhcpcd-9.4.1 with the following changes:

* BSD: Find the correct interface for tunnelled routes
* OpenBSD: Fix uniqueness of routes for matching priorities
* Linux: Support more platforms for seccomp (thanks to Fabrice Fontaine)
* eloop: Process all waiting fd's as they come in
* control: Unlink sockets when not in privsep
* privsep: Renamed Master to Manager
* privsep: Renamed Privilged Actioneer to Privileged Proxy
* privsep: Fix getting interface VLANID on BSD
* privsep: Enforce proper alignment of serialized struct cmsghdr
* IPv4LL: Don't remove statically assigned addresses
* routes: Fix route comparision for network prefixes with different masks
* DHCP6: Only send FQDN for SOLICIT, REQUEST, RENEW, or REBIND messages
* DHCP6: Don't spam the log when a RA repeatedly triggers an INFORM
* DHCP: Fix infinite INFORM messages

show more ...

Update to dhcpcd-9.4.0 with the following changes:

* DHCP: For anonymous, just use a generic ClientID
* link: Split hardware address randomisation out of anonymous option
* link: Only report hard

Update to dhcpcd-9.4.0 with the following changes:

* DHCP: For anonymous, just use a generic ClientID
* link: Split hardware address randomisation out of anonymous option
* link: Only report hardware changes for active interfaces
* link: Report errors obtaining recv buffer size on overflow
* hooks: Add NOCARRIER_ROAMING reason
* hooks: interface_order now reflects priorities again

show more ...

dhcpcd: Update to dhcpcd-9.3.3 with the following changes:

* dhcpcd: Don't create a launcher process if keeping in foreground
* dhcpcd: Add --noconfigure option
* control: Create an unpriv socket

dhcpcd: Update to dhcpcd-9.3.3 with the following changes:

* dhcpcd: Don't create a launcher process if keeping in foreground
* dhcpcd: Add --noconfigure option
* control: Create an unpriv socket for non master mode
* options: Don't log unknown ones when printing pidfile location

show more ...

Update to dhcpcd-9.2.0 with the following changes:

* route: ensure IPv4LL routes come last in priority
* DHCP: fix many issues with extending the last lease
* privsep: don't read control group fr

Update to dhcpcd-9.2.0 with the following changes:

* route: ensure IPv4LL routes come last in priority
* DHCP: fix many issues with extending the last lease
* privsep: don't read control group from config in privsep
* privsep: only the master process responds to signals
* privsep: use a socketpair for stderr/stdin rather than dupping /dev/null
* privsep: right limit stdin/stderr/stdout
* privsep: dumping a lease is now run in a sandbox
* options: check if kernel supports INET or INET6 before enabling default
* options: let clientid override a prior duid
* options: allow -1 to represent infinity for requested lease time
* dhcpcd: fix a crash initing a new interface after route overflow

show more ...

Update to dhcpcd-9.1.2 with the following changes:

* BSD: Only mark static routes from dhcpcd.conf as static
* DHCP6: Ensure requested addresses are requested
* DHCP6: Fix prefix length calculati

Update to dhcpcd-9.1.2 with the following changes:

* BSD: Only mark static routes from dhcpcd.conf as static
* DHCP6: Ensure requested addresses are requested
* DHCP6: Fix prefix length calculation when no prefix specified

* privsep: Implement a resource limited sandbox

You will see a control proxy process now.
This is for the resource limited sandbox so that we can isolate
requests over the control socket.
For NetBSD, FreeBSD and derivatives such as DragonFlyBSD this is a massive win
as these OS now enjoy a similar level of protection as Capsicum or Pledge,
but without the syscall filtering.

show more ...

Update to dhcpcd-9.1.0 with the following changes:

* Leases are stored outside the chroot again
* The chroot directory can now be (and should be) empty [1]
* BPF: set write filters when supported

Update to dhcpcd-9.1.0 with the following changes:

* Leases are stored outside the chroot again
* The chroot directory can now be (and should be) empty [1]
* BPF: set write filters when supported
* ARP is now per address rather than per interface
* Filter allowed ioctls in the privileged actioneer
* Filter allowed UDP ports used by sendto(2) in the privileged actioneer
* Filter allowed file paths in the privileged actioneer
* route socket is now drained on overflow as it cannot be
re-opened by the unpriviledged user

* hostname can no longer be clobbered by SLAAC
* grep is no longer used by the test hook
* Interface hardware address type changes are now picked up
* Fixed some RA timing issues
* Fixed nd_* option parsing in dhcpcd.conf
* Allow SIGPIPE in scripts
* Default dhcpcd.conf no longer sends the current hostname
* Default dhcpcd.conf no longer sends a vendorclassid

show more ...

Import dhcpcd-9.0.0 with the following changes:

* inet: Allow forcing a host route from an interface without a lease
* dhcpcd: Don't wait for an address family to complete if not using it

* INET

Import dhcpcd-9.0.0 with the following changes:

* inet: Allow forcing a host route from an interface without a lease
* dhcpcd: Don't wait for an address family to complete if not using it

* INET6: Support a /128 prefix advertised via RA
* BSD: More address validation from route(4) messages
* DHCP: Fix a potential segfault on DaD failure
* IPv4LL: Fix a potential segfault when dropping IPv4LL addresses

* Decode interface complex interface names eth0.100:2 eth0i100:2.
This allows us to ignore some virtual interfaces by default
* ARP: Report L2 header address on conflict for more clarity
* DHCP: Support jumbo frames (untested)
* DHCP6: Clean up old lease on failure to confirm/rebind, etc
* RA: Prefer older routers
* INET6: Obscure prefixes are now calculated correctly

* Privilege Separation
* Default hostname is now a blank string
* Leases are now dumped over the control socket - you get RA's now as well.
* Better support for many IPv6 routers
* RA: Deprecate stale addresses by setting pltime 0
* DHCP6: Deprecate stale addresses by setting pltime 0

show more ...

Import dhcpcd-8.1.0 to vendor branch with the following changes:

* Fix carrier status after a route socket overflow
* Allow domain spaced options
* DHCP: Allow not sending Force Renew Nonce or Re

Import dhcpcd-8.1.0 to vendor branch with the following changes:

* Fix carrier status after a route socket overflow
* Allow domain spaced options
* DHCP: Allow not sending Force Renew Nonce or Reconf Accept
* IPv4LL: Now passes Apple Bonjour test versions 1.4 and 1.5
* ARP: Fix a typo and remove pragma (thus working with old gcc)
* DHCP6: Fix a cosmetic issue with infinite leases
* DHCP6: SLA 0 and Prefix Len 0 will now add a delegatd /64 address
* Ignore some virtual interfaces such as Tap and Bridge by default
* BPF: Move validation logic out of BPF and back into dhcpcd

show more ...

Import dhcpcd-8.0.4 to vendor branch.

Import dhcpcd 7.0.8

Version: 7.0.8
Date: 2018 August 20
URL: https://github.com/rsmarples/dhcpcd/releases
Homepage: https://roy.marples.name/projects/dhcpcd