sys: Automated cleanup of cdefs and other formatting

Apply the following automated changes to try to eliminate
no-longer-needed sys/cdefs.h includes as well as now-empty
blank lines in a row.

Remov

sys: Automated cleanup of cdefs and other formatting

Apply the following automated changes to try to eliminate
no-longer-needed sys/cdefs.h includes as well as now-empty
blank lines in a row.

Remove /^#if.*\n#endif.*\n#include\s+<sys/cdefs.h>.*\n/
Remove /\n+#include\s+<sys/cdefs.h>.*\n+#if.*\n#endif.*\n+/
Remove /\n+#if.*\n#endif.*\n+/
Remove /^#if.*\n#endif.*\n/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/types.h>/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/param.h>/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/capsicum.h>/

Sponsored by: Netflix

show more ...

padlock: Switch to using FPU_KERN_NOCTX

Reviewed by: kib, markj
Differential Revision: https://reviews.freebsd.org/D41582

sys: Remove $FreeBSD$: one-line .c pattern

Remove /^[\s*]*__FBSDID\("\$FreeBSD\$"\);?\s*\n/

crypto: Remove unused devclass arguments to DRIVER_MODULE.

padlock(4): fix instapanics with geli authentication

cryptodev_process implementations are supposed to return 0

PR: 247986
Submitted by: jhb
MFC after: 1 week

Add a crypto capability flag for accelerated software drivers.

Use this in GELI to print out a different message when accelerated
software such as AESNI is used vs plain software crypto.

While here

Add a crypto capability flag for accelerated software drivers.

Use this in GELI to print out a different message when accelerated
software such as AESNI is used vs plain software crypto.

While here, simplify the logic in GELI a bit for determing which type
of crypto driver was chosen the first time by examining the
capabilities of the matched driver after a single call to
crypto_newsession rather than making separate calls with different
flags.

Reviewed by: delphij
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D25126

show more ...

Mark padlock(4) and cryptocteon(4) as software drivers.

Both already return the accelerated software priority from
cryptodev_probesession.

Sponsored by: Chelsio Communications
Differential Revision

Mark padlock(4) and cryptocteon(4) as software drivers.

Both already return the accelerated software priority from
cryptodev_probesession.

Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D25125

show more ...

Refactor driver and consumer interfaces for OCF (in-kernel crypto).

- The linked list of cryptoini structures used in session
initialization is replaced with a new flat structure: struct
crypto_

Refactor driver and consumer interfaces for OCF (in-kernel crypto).

- The linked list of cryptoini structures used in session
initialization is replaced with a new flat structure: struct
crypto_session_params. This session includes a new mode to define
how the other fields should be interpreted. Available modes
include:

- COMPRESS (for compression/decompression)
- CIPHER (for simply encryption/decryption)
- DIGEST (computing and verifying digests)
- AEAD (combined auth and encryption such as AES-GCM and AES-CCM)
- ETA (combined auth and encryption using encrypt-then-authenticate)

Additional modes could be added in the future (e.g. if we wanted to
support TLS MtE for AES-CBC in the kernel we could add a new mode
for that. TLS modes might also affect how AAD is interpreted, etc.)

The flat structure also includes the key lengths and algorithms as
before. However, code doesn't have to walk the linked list and
switch on the algorithm to determine which key is the auth key vs
encryption key. The 'csp_auth_*' fields are always used for auth
keys and settings and 'csp_cipher_*' for cipher. (Compression
algorithms are stored in csp_cipher_alg.)

- Drivers no longer register a list of supported algorithms. This
doesn't quite work when you factor in modes (e.g. a driver might
support both AES-CBC and SHA2-256-HMAC separately but not combined
for ETA). Instead, a new 'crypto_probesession' method has been
added to the kobj interface for symmteric crypto drivers. This
method returns a negative value on success (similar to how
device_probe works) and the crypto framework uses this value to pick
the "best" driver. There are three constants for hardware
(e.g. ccr), accelerated software (e.g. aesni), and plain software
(cryptosoft) that give preference in that order. One effect of this
is that if you request only hardware when creating a new session,
you will no longer get a session using accelerated software.
Another effect is that the default setting to disallow software
crypto via /dev/crypto now disables accelerated software.

Once a driver is chosen, 'crypto_newsession' is invoked as before.

- Crypto operations are now solely described by the flat 'cryptop'
structure. The linked list of descriptors has been removed.

A separate enum has been added to describe the type of data buffer
in use instead of using CRYPTO_F_* flags to make it easier to add
more types in the future if needed (e.g. wired userspace buffers for
zero-copy). It will also make it easier to re-introduce separate
input and output buffers (in-kernel TLS would benefit from this).

Try to make the flags related to IV handling less insane:

- CRYPTO_F_IV_SEPARATE means that the IV is stored in the 'crp_iv'
member of the operation structure. If this flag is not set, the
IV is stored in the data buffer at the 'crp_iv_start' offset.

- CRYPTO_F_IV_GENERATE means that a random IV should be generated
and stored into the data buffer. This cannot be used with
CRYPTO_F_IV_SEPARATE.

If a consumer wants to deal with explicit vs implicit IVs, etc. it
can always generate the IV however it needs and store partial IVs in
the buffer and the full IV/nonce in crp_iv and set
CRYPTO_F_IV_SEPARATE.

The layout of the buffer is now described via fields in cryptop.
crp_aad_start and crp_aad_length define the boundaries of any AAD.
Previously with GCM and CCM you defined an auth crd with this range,
but for ETA your auth crd had to span both the AAD and plaintext
(and they had to be adjacent).

crp_payload_start and crp_payload_length define the boundaries of
the plaintext/ciphertext. Modes that only do a single operation
(COMPRESS, CIPHER, DIGEST) should only use this region and leave the
AAD region empty.

If a digest is present (or should be generated), it's starting
location is marked by crp_digest_start.

Instead of using the CRD_F_ENCRYPT flag to determine the direction
of the operation, cryptop now includes an 'op' field defining the
operation to perform. For digests I've added a new VERIFY digest
mode which assumes a digest is present in the input and fails the
request with EBADMSG if it doesn't match the internally-computed
digest. GCM and CCM already assumed this, and the new AEAD mode
requires this for decryption. The new ETA mode now also requires
this for decryption, so IPsec and GELI no longer do their own
authentication verification. Simple DIGEST operations can also do
this, though there are no in-tree consumers.

To eventually support some refcounting to close races, the session
cookie is now passed to crypto_getop() and clients should no longer
set crp_sesssion directly.

- Assymteric crypto operation structures should be allocated via
crypto_getkreq() and freed via crypto_freekreq(). This permits the
crypto layer to track open asym requests and close races with a
driver trying to unregister while asym requests are in flight.

- crypto_copyback, crypto_copydata, crypto_apply, and
crypto_contiguous_subsegment now accept the 'crp' object as the
first parameter instead of individual members. This makes it easier
to deal with different buffer types in the future as well as
separate input and output buffers. It's also simpler for driver
writers to use.

- bus_dmamap_load_crp() loads a DMA mapping for a crypto buffer.
This understands the various types of buffers so that drivers that
use DMA do not have to be aware of different buffer types.

- Helper routines now exist to build an auth context for HMAC IPAD
and OPAD. This reduces some duplicated work among drivers.

- Key buffers are now treated as const throughout the framework and in
device drivers. However, session key buffers provided when a session
is created are expected to remain alive for the duration of the
session.

- GCM and CCM sessions now only specify a cipher algorithm and a cipher
key. The redundant auth information is not needed or used.

- For cryptosoft, split up the code a bit such that the 'process'
callback now invokes a function pointer in the session. This
function pointer is set based on the mode (in effect) though it
simplifies a few edge cases that would otherwise be in the switch in
'process'.

It does split up GCM vs CCM which I think is more readable even if there
is some duplication.

- I changed /dev/crypto to support GMAC requests using CRYPTO_AES_NIST_GMAC
as an auth algorithm and updated cryptocheck to work with it.

- Combined cipher and auth sessions via /dev/crypto now always use ETA
mode. The COP_F_CIPHER_FIRST flag is now a no-op that is ignored.
This was actually documented as being true in crypto(4) before, but
the code had not implemented this before I added the CIPHER_FIRST
flag.

- I have not yet updated /dev/crypto to be aware of explicit modes for
sessions. I will probably do that at some point in the future as well
as teach it about IV/nonce and tag lengths for AEAD so we can support
all of the NIST KAT tests for GCM and CCM.

- I've split up the exising crypto.9 manpage into several pages
of which many are written from scratch.

- I have converted all drivers and consumers in the tree and verified
that they compile, but I have not tested all of them. I have tested
the following drivers:

- cryptosoft
- aesni (AES only)
- blake2
- ccr

and the following consumers:

- cryptodev
- IPsec
- ktls_ocf
- GELI (lightly)

I have not tested the following:

- ccp
- aesni with sha
- hifn
- kgssapi_krb5
- ubsec
- padlock
- safe
- armv8_crypto (aarch64)
- glxsb (i386)
- sec (ppc)
- cesa (armv7)
- cryptocteon (mips64)
- nlmsec (mips64)

Discussed with: cem
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D23677

show more ...

OpenCrypto: Convert sessions to opaque handles instead of integers

Track session objects in the framework, and pass handles between the
framework (OCF), consumers, and drivers. Avoid redundancy and

OpenCrypto: Convert sessions to opaque handles instead of integers

Track session objects in the framework, and pass handles between the
framework (OCF), consumers, and drivers. Avoid redundancy and complexity in
individual drivers by allocating session memory in the framework and
providing it to drivers in ::newsession().

Session handles are no longer integers with information encoded in various
high bits. Use of the CRYPTO_SESID2FOO() macros should be replaced with the
appropriate crypto_ses2foo() function on the opaque session handle.

Convert OCF drivers (in particular, cryptosoft, as well as myriad others) to
the opaque handle interface. Discard existing session tracking as much as
possible (quick pass). There may be additional code ripe for deletion.

Convert OCF consumers (ipsec, geom_eli, krb5, cryptodev) to handle-style
interface. The conversion is largely mechnical.

The change is documented in crypto.9.

Inspired by
https://lists.freebsd.org/pipermail/freebsd-arch/2018-January/018835.html .

No objection from: ae (ipsec portion)
Reported by: jhb

show more ...

Remove unused error return from API that cannot fail

No implementation of fpu_kern_enter() can fail, and it was causing needless
error checking boilerplate and confusion. Change the return code to v

Remove unused error return from API that cannot fail

No implementation of fpu_kern_enter() can fail, and it was causing needless
error checking boilerplate and confusion. Change the return code to void to
match reality.

(This trivial change took nine days to land because of the commit hook on
sys/dev/random. Please consider removing the hook or otherwise lowering the
bar -- secteam never seems to have free time to review patches.)

Reported by: Lachlan McIlroy <Lachlan.McIlroy AT isilon.com>
Reviewed by: delphij
Approved by: secteam (delphij)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D14380

show more ...

Remove pc98 support completely.
I thank all developers and contributors for pc98.

Relnotes: yes

Add FPU_KERN_KTHR flag to fpu_kern_enter(9), which avoids saving FPU
context into memory for the kernel threads which called
fpu_kern_thread(9). This allows the fpu_kern_enter() callers to not
check

Add FPU_KERN_KTHR flag to fpu_kern_enter(9), which avoids saving FPU
context into memory for the kernel threads which called
fpu_kern_thread(9). This allows the fpu_kern_enter() callers to not
check for is_fpu_kern_thread() to get the optimization.

Apply the flag to padlock(4) and aesni(4). In aesni_cipher_process(),
do not leak FPU context state on error.

Sponsored by: The FreeBSD Foundation
MFC after: 1 week

show more ...

Add support for the extended FPU states on amd64, both for native
64bit and 32bit ABIs. As a side-effect, it enables AVX on capable
CPUs.

In particular:

- Query the CPU support for XSAVE, list of

Add support for the extended FPU states on amd64, both for native
64bit and 32bit ABIs. As a side-effect, it enables AVX on capable
CPUs.

In particular:

- Query the CPU support for XSAVE, list of the supported extensions
and the required size of FPU save area. The hw.use_xsave tunable is
provided for disabling XSAVE, and hw.xsave_mask may be used to
select the enabled extensions.

- Remove the FPU save area from PCB and dynamically allocate the
(run-time sized) user save area on the top of the kernel stack,
right above the PCB. Reorganize the thread0 PCB initialization to
postpone it after BSP is queried for save area size.

- The dumppcb, stoppcbs and susppcbs now do not carry the FPU state as
well. FPU state is only useful for suspend, where it is saved in
dynamically allocated suspfpusave area.

- Use XSAVE and XRSTOR to save/restore FPU state, if supported and
enabled.

- Define new mcontext_t flag _MC_HASFPXSTATE, indicating that
mcontext_t has a valid pointer to out-of-struct extended FPU
state. Signal handlers are supplied with stack-allocated fpu
state. The sigreturn(2) and setcontext(2) syscall honour the flag,
allowing the signal handlers to inspect and manipilate extended
state in the interrupted context.

- The getcontext(2) never returns extended state, since there is no
place in the fixed-sized mcontext_t to place variable-sized save
area. And, since mcontext_t is embedded into ucontext_t, makes it
impossible to fix in a reasonable way. Instead of extending
getcontext(2) syscall, provide a sysarch(2) facility to query
extended FPU state.

- Add ptrace(2) support for getting and setting extended state; while
there, implement missed PT_I386_{GET,SET}XMMREGS for 32bit binaries.

- Change fpu_kern KPI to not expose struct fpu_kern_ctx layout to
consumers, making it opaque. Internally, struct fpu_kern_ctx now
contains a space for the extended state. Convert in-kernel consumers
of fpu_kern KPI both on i386 and amd64.

First version of the support for AVX was submitted by Tim Bird
<tim.bird am sony com> on behalf of Sony. This version was written
from scratch.

Tested by: pho (previous version), Yamagi Burmeister <lists yamagi org>
MFC after: 1 month

show more ...

MFaesni r215427:
Only save FPU context when not executing in the context of the crypto
thread.

Tested by: Mike Tancsa
MFC after: 1 week

Use the fpu_kern_enter() interface to properly separate usermode FPU
context from in-kernel execution of padlock instructions and to handle
spurious FPUDNA exceptions that sometime are raised when do

Use the fpu_kern_enter() interface to properly separate usermode FPU
context from in-kernel execution of padlock instructions and to handle
spurious FPUDNA exceptions that sometime are raised when doing padlock
calculations.

Globally mark crypto(9) kthread as using FPU.

Reviewed by: pjd
Hardware provided by: Sentex Communications
Tested by: pho
PR: amd64/135014
MFC after: 1 month

show more ...

identify routine takes driver_t *, not device_t *.

Connect padlock(4) to amd64 build for VIA Nano processors.

Fix a potential NULL-pointer dereference in padlock(4).

Spotted by: Coverity (via pjd)
MFC after: 1 week

Simplify session selection/allocation.

- Fix freeing session on newsession failure.
- Update copyright years.

Implify sessions freeing loop.

We don't have to drop a lock around malloc(M_NOWAIT).

When freeing session, restore its ID after zeroing memory.

Bug tracked down by: Patrick Lamaiziere <patfbsd@davenulle.org>

Sessions in-use are at the end of the queue, so use TAILQ_FOREACH_REVERSE()
when looking for them.

Idea from: Patrick Lamaiziere <patfbsd@davenulle.org>

Convert lock that protects sessions list from a mutex to a rwlock.
Now we can use read lock in fast path (padlock_process()).