sys: Automated cleanup of cdefs and other formatting

Apply the following automated changes to try to eliminate
no-longer-needed sys/cdefs.h includes as well as now-empty
blank lines in a row.

Remov

sys: Automated cleanup of cdefs and other formatting

Apply the following automated changes to try to eliminate
no-longer-needed sys/cdefs.h includes as well as now-empty
blank lines in a row.

Remove /^#if.*\n#endif.*\n#include\s+<sys/cdefs.h>.*\n/
Remove /\n+#include\s+<sys/cdefs.h>.*\n+#if.*\n#endif.*\n+/
Remove /\n+#if.*\n#endif.*\n+/
Remove /^#if.*\n#endif.*\n/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/types.h>/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/param.h>/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/capsicum.h>/

Sponsored by: Netflix

show more ...

sys: Remove $FreeBSD$: one-line .c pattern

Remove /^[\s*]*__FBSDID\("\$FreeBSD\$"\);?\s*\n/

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.

Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix

show more ...

Reset indentation of this flag. No functional change intended.
Found with gcc.

sys/dev/ata/chipsets/ata-siliconimage.c: In function 'ata_cmd_ch_attach':
sys/dev/ata/chipsets/ata-siliconimage.c:187:5

Reset indentation of this flag. No functional change intended.
Found with gcc.

sys/dev/ata/chipsets/ata-siliconimage.c: In function 'ata_cmd_ch_attach':
sys/dev/ata/chipsets/ata-siliconimage.c:187:5:
warning: this 'if' clause does not guard... [-Wmisleading-indentation]
if (ctlr->chip->cfg2 & SII_INTR)
^~
sys/dev/ata/chipsets/ata-siliconimage.c:190:2:
note: ...this statement, but the latter is misleadingly indented as if it were guarded by the 'if'
ch->flags |= ATA_NO_ATAPI_DMA;

show more ...

sys/dev: further adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error

sys/dev: further adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

show more ...

Remove from legacy ata(4) driver support for hardware, supported by newer
and more functional drivers ahci(4), siis(4) and mvs(4).

This removes about 3400 lines of code, unused since FreeBSD 9.0 rel

Remove from legacy ata(4) driver support for hardware, supported by newer
and more functional drivers ahci(4), siis(4) and mvs(4).

This removes about 3400 lines of code, unused since FreeBSD 9.0 release.

show more ...

Reduce priority of ATA/SATA drivers.

Legacy ata(4) -> BUS_PROBE_LOW_PRIORITY; more functional ahci(4), siis(4),
mvs(4) -> BUS_PROBE_DEFAULT; BUS_PROBE_VENDOR leave for vendor drivers.

MFC after:

Reduce priority of ATA/SATA drivers.

Legacy ata(4) -> BUS_PROBE_LOW_PRIORITY; more functional ahci(4), siis(4),
mvs(4) -> BUS_PROBE_DEFAULT; BUS_PROBE_VENDOR leave for vendor drivers.

MFC after: 2 weeks

show more ...

- With the demise of !ATA_CAM, ATA_STATIC_ID is the only ata(4) related
option left but actually consumed by ada(4), so move it to opt_ada.h
and get rid of opt_ata.h.
- Fix stand-alone build of a

- With the demise of !ATA_CAM, ATA_STATIC_ID is the only ata(4) related
option left but actually consumed by ada(4), so move it to opt_ada.h
and get rid of opt_ata.h.
- Fix stand-alone build of atacore(4) by adding opt_cam.h.
- Use __FBSDID.
- Use DEVMETHOD_END.
- Use NULL instead of 0 for pointers.

show more ...

Remove all legacy ATA code parts, not used since options ATA_CAM enabled in
most kernels before FreeBSD 9.0. Remove such modules and respective kernel
options: atadisk, ataraid, atapicd, atapifd, at

Remove all legacy ATA code parts, not used since options ATA_CAM enabled in
most kernels before FreeBSD 9.0. Remove such modules and respective kernel
options: atadisk, ataraid, atapicd, atapifd, atapist, atapicam. Remove the
atacontrol utility and some man pages. Remove useless now options ATA_CAM.

No objections: current@, stable@
MFC after: never

show more ...

Remove duplicate const specifiers in many drivers (I hope I got all of
them, please let me know if not). Most of these are of the form:

static const struct bzzt_type {
[...list of members...]
} co

Remove duplicate const specifiers in many drivers (I hope I got all of
them, please let me know if not). Most of these are of the form:

static const struct bzzt_type {
[...list of members...]
} const bzzt_devs[] = {
[...list of initializers...]
};

The second const is unnecessary, as arrays cannot be modified anyway,
and if the elements are const, the whole thing is const automatically
(e.g. it is placed in .rodata).

I have verified this does not change the binary output of a full kernel
build (except for build timestamps embedded in the object files).

Reviewed by: yongari, marius
MFC after: 1 week

show more ...

Implement CAM_ATAIO_NEEDRESULT (fetching full set of result registers) for
ata(4) driver in ATA_CAM mode. That slighty improves error reporting and
also should fix `smartctl -l scterc /dev/adaX` ope

Implement CAM_ATAIO_NEEDRESULT (fetching full set of result registers) for
ata(4) driver in ATA_CAM mode. That slighty improves error reporting and
also should fix `smartctl -l scterc /dev/adaX` operation.

MFC after: 3 weeks

show more ...

- First pass at const'ifying ata(4) as appropriate.
- Use DEVMETHOD_END.
- Use NULL instead of 0 for pointers

MFC after: 1 week

Using ATA_CAM along with ATAPI DMA causes data corruption with ALI_NEW
and CMD controllers for reasons unknown so disable it.

PR: 164226

Convert files to UTF-8

In r225931 I've missed the only other driver using the pointer returned
by rman_get_virtual(9) to access device registers sparc64 currently cares
about.
Ideally ata(4) should just be converted to acc

In r225931 I've missed the only other driver using the pointer returned
by rman_get_virtual(9) to access device registers sparc64 currently cares
about.
Ideally ata(4) should just be converted to access these using bus_space(9)
read/write functions instead as there's really no reason to do it the
former way. However, this part of ata-siliconimage.c should go away in
favor of siis(4) sooner or later anyway and I don't have the hardware to
actually test the SX4 bits of ata-promise.c.
Also ideally the other architectures should also properly handle the
BUS_SPACE_MAP_LINEAR flag of bus_space_map(9) so this code wouldn't need
to be #ifdef'ed.

show more ...

Add missing bus_dmamap_sync() calls for the work DMA map.

MFC after: 2 weeks

Several chipset drivers alter parameters relevant for the DMA tag creation,
i.e. alignment, max_address, max_iosize and segsize (only max_address is
thought to have an negative impact regarding this

Several chipset drivers alter parameters relevant for the DMA tag creation,
i.e. alignment, max_address, max_iosize and segsize (only max_address is
thought to have an negative impact regarding this issue though), after
calling ata_dmainit() either directly or indirectly so these values have
no effect or at least no effect on the DMA tags and the defaults are used
for the latter instead. So change the drivers to set these parameters
up-front and ata_dmainit() to honor them.

Reviewd by: mav
MFC after: 1 month

show more ...

Set of legacy mode SATA enchancements:
- Implement proper combined mode decoding for Intel controllers to properly
identify SATA and PATA channels and associate ATA channels with SATA ports.
This fix

Set of legacy mode SATA enchancements:
- Implement proper combined mode decoding for Intel controllers to properly
identify SATA and PATA channels and associate ATA channels with SATA ports.
This fixes wrong reporting and in some cases hard resets to wrong SATA ports.
- Improve SATA registers support to handle hot-plug events and potentially
interface errors. For ICH5/6300ESB chipsets these registers accessible via
PCI config space. For later ones they may be accessible via PCI BAR(5).
- For controllers not generating interrupts on hot-plug events, implement
periodic status polling. Use it to detect hot-plug on Intel and VIA
controllers. Same probably could also be used for Serverworks and SIS.

show more ...

Add missing byteswap, works on big endian systems now (tested on Netlogic
XLS MIPS processor).

Submitted by: Sreekanth M. S. <kanthms at netlogicmicro dot com>
Reviewed by: mav

Add fix for SiI3114 and SiI3512 chips bug, which caused sending R_ERR in
response to DMA activate FIS under certain circumstances. This is
recommended fix from chip datasheet. If triggered, this bug

Add fix for SiI3114 and SiI3512 chips bug, which caused sending R_ERR in
response to DMA activate FIS under certain circumstances. This is
recommended fix from chip datasheet. If triggered, this bug most likely
cause write command timeout.

MFC after: 2 weeks

show more ...

SATA1.x SiliconImage controllers on power-on reset TFD Status register into
value 0xff. On hot-plug this value confuses ata_generic_reset() device
presence detection logic. As soon as we already know

SATA1.x SiliconImage controllers on power-on reset TFD Status register into
value 0xff. On hot-plug this value confuses ata_generic_reset() device
presence detection logic. As soon as we already know drive presence from
SATA hard reset, hint ata_generic_reset() to wait for device signature
until success or full timeout.

show more ...

MFC r203525:
Report SATA300 chips also as SATA.

MFC a number of changes from head for ISP (203478,203463,203444,202418,201758,
201408,201325,200089,198822,197373,197372,197214,196162). Since one of those
changes was a semicolon cleanup from somebo

MFC a number of changes from head for ISP (203478,203463,203444,202418,201758,
201408,201325,200089,198822,197373,197372,197214,196162). Since one of those
changes was a semicolon cleanup from somebody else, this touches a lot more.

show more ...

MFC r200171, r200182, r200275, r200295, r200359:
Introduce ATA_CAM kernel option, turning ata(4) controller drivers into
cam(4) interface modules. When enabled, this option deprecates all ata(4)
peri

MFC r200171, r200182, r200275, r200295, r200359:
Introduce ATA_CAM kernel option, turning ata(4) controller drivers into
cam(4) interface modules. When enabled, this option deprecates all ata(4)
peripheral drivers (ad, acd, ...) and interfaces and allows cam(4) drivers
(ada, cd, ...) and interfaces to be natively used instead.

As side effect of this, ata(4) mode setting code was completely rewritten
to make controller API more strict and permit above change. While doing
this, SATA revision was separated from PATA mode. It allows DMA-incapable
SATA devices to operate and makes hw.ata.(ata|atapi)_dma tunable work again.

Also allow ata(4) controller drivers (except some specific or broken ones)
to handle larger data transfers. Previous constraint of 64K was artificial
and is not really required by PCI ATA BM specification or hardware.

Submitted by: nwitehorn (powerpc part)

show more ...

MFC r198752:
Allow SATA1 SiI chips to do full-sized DMA. Specification tells that we may
release DMA constrants even more, but it require some additional handling.