new-bus: Remove the 'rid' and 'type' arguments from BUS_RELEASE_RESOURCE

The public bus_release_resource() API still accepts both forms, but
the internal kobj method no longer passes the arguments.

new-bus: Remove the 'rid' and 'type' arguments from BUS_RELEASE_RESOURCE

The public bus_release_resource() API still accepts both forms, but
the internal kobj method no longer passes the arguments.
Implementations which need the rid or type now use rman_get_rid() or
rman_get_type() to fetch the value from the allocated resource.

Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D44131

show more ...

sys: Remove $FreeBSD$: one-line .c pattern

Remove /^[\s*]*__FBSDID\("\$FreeBSD\$"\);?\s*\n/

dpaa2: Avoid dpaa2_cmd race conditions

struct dpaa2_cmd is no longer malloc'ed, but can be allocated on stack
and initialized with DPAA2_CMD_INIT() on demand. Drivers stopped caching
their DPAA2 com

dpaa2: Avoid dpaa2_cmd race conditions

struct dpaa2_cmd is no longer malloc'ed, but can be allocated on stack
and initialized with DPAA2_CMD_INIT() on demand. Drivers stopped caching
their DPAA2 command objects (and associated tokens) in the software
contexts in order to avoid using them concurrently.

Reviewed by: bz
Approved by: bz (mentor)
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D39509

show more ...

Add initial DPAA2 support

DPAA2 is a hardware-level networking architecture found in some NXP
SoCs which contain hardware blocks including Management Complex
(MC, a command interface to manipulate D

Add initial DPAA2 support

DPAA2 is a hardware-level networking architecture found in some NXP
SoCs which contain hardware blocks including Management Complex
(MC, a command interface to manipulate DPAA2 objects), Wire Rate I/O
processor (WRIOP, packets distribution, queuing, drop decisions),
Queues and Buffers Manager (QBMan, Rx/Tx queues control, Rx buffer
pools) and the others.

The Management Complex runs NXP-supplied firmware which provides DPAA2
objects as an abstraction layer over those blocks to simplify an
access to the underlying hardware. Each DPAA2 object has its own
driver (to perform an initialization at least) and will be visible
as a separate device in the device tree.

Two new drivers (dpaa2_mc and dpaa2_rc) act like firmware buses in
order to form a hierarchy of the DPAA2 devices:

acpiX (or simplebusX)
dpaa2_mcX
dpaa2_rcX
dpaa2_mcp0
...
dpaa2_mcpN
dpaa2_bpX
dpaa2_macX
dpaa2_io0
...
dpaa2_ioM
dpaa2_niX

dpaa2_mc is suppossed to be a root of the hierarchy, comes in ACPI
and FDT flavours and implements helper interfaces to allocate and
assign bus resources, MSI and "managed" DPAA2 devices (NXP treats some
of the objects as resources for the other DPAA2 objects to let them
function properly). Almost all of the DPAA2 objects are assigned to
the resource containers (dpaa2_rc) to implement isolation.

The initial implementation focuses on the DPAA2 network interface
to be operational. It is the most complex object in terms of
dependencies which uses I/O objects to transmit/receive packets.

Approved by: bz (mentor)
Tested by: manu, bz
MFC after: 3 months
Differential Revision: https://reviews.freebsd.org/D36638

show more ...

new-bus: Remove the 'rid' and 'type' arguments from BUS_RELEASE_RESOURCE

The public bus_release_resource() API still accepts both forms, but
the internal kobj method no longer passes the arguments.

new-bus: Remove the 'rid' and 'type' arguments from BUS_RELEASE_RESOURCE

The public bus_release_resource() API still accepts both forms, but
the internal kobj method no longer passes the arguments.
Implementations which need the rid or type now use rman_get_rid() or
rman_get_type() to fetch the value from the allocated resource.

Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D44131

show more ...

sys: Remove $FreeBSD$: one-line .c pattern

Remove /^[\s*]*__FBSDID\("\$FreeBSD\$"\);?\s*\n/

dpaa2: Avoid dpaa2_cmd race conditions

struct dpaa2_cmd is no longer malloc'ed, but can be allocated on stack
and initialized with DPAA2_CMD_INIT() on demand. Drivers stopped caching
their DPAA2 com

dpaa2: Avoid dpaa2_cmd race conditions

struct dpaa2_cmd is no longer malloc'ed, but can be allocated on stack
and initialized with DPAA2_CMD_INIT() on demand. Drivers stopped caching
their DPAA2 command objects (and associated tokens) in the software
contexts in order to avoid using them concurrently.

Reviewed by: bz
Approved by: bz (mentor)
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D39509

show more ...

Add initial DPAA2 support

DPAA2 is a hardware-level networking architecture found in some NXP
SoCs which contain hardware blocks including Management Complex
(MC, a command interface to manipulate D

Add initial DPAA2 support

DPAA2 is a hardware-level networking architecture found in some NXP
SoCs which contain hardware blocks including Management Complex
(MC, a command interface to manipulate DPAA2 objects), Wire Rate I/O
processor (WRIOP, packets distribution, queuing, drop decisions),
Queues and Buffers Manager (QBMan, Rx/Tx queues control, Rx buffer
pools) and the others.

The Management Complex runs NXP-supplied firmware which provides DPAA2
objects as an abstraction layer over those blocks to simplify an
access to the underlying hardware. Each DPAA2 object has its own
driver (to perform an initialization at least) and will be visible
as a separate device in the device tree.

Two new drivers (dpaa2_mc and dpaa2_rc) act like firmware buses in
order to form a hierarchy of the DPAA2 devices:

acpiX (or simplebusX)
dpaa2_mcX
dpaa2_rcX
dpaa2_mcp0
...
dpaa2_mcpN
dpaa2_bpX
dpaa2_macX
dpaa2_io0
...
dpaa2_ioM
dpaa2_niX

dpaa2_mc is suppossed to be a root of the hierarchy, comes in ACPI
and FDT flavours and implements helper interfaces to allocate and
assign bus resources, MSI and "managed" DPAA2 devices (NXP treats some
of the objects as resources for the other DPAA2 objects to let them
function properly). Almost all of the DPAA2 objects are assigned to
the resource containers (dpaa2_rc) to implement isolation.

The initial implementation focuses on the DPAA2 network interface
to be operational. It is the most complex object in terms of
dependencies which uses I/O objects to transmit/receive packets.

Approved by: bz (mentor)
Tested by: manu, bz
MFC after: 3 months
Differential Revision: https://reviews.freebsd.org/D36638

show more ...

dpaa2: Avoid dpaa2_cmd race conditions

struct dpaa2_cmd is no longer malloc'ed, but can be allocated on stack
and initialized with DPAA2_CMD_INIT() on demand. Drivers stopped caching
their DPAA2 com

dpaa2: Avoid dpaa2_cmd race conditions

struct dpaa2_cmd is no longer malloc'ed, but can be allocated on stack
and initialized with DPAA2_CMD_INIT() on demand. Drivers stopped caching
their DPAA2 command objects (and associated tokens) in the software
contexts in order to avoid using them concurrently.

Reviewed by: bz
Approved by: bz (mentor)
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D39509

show more ...

Add initial DPAA2 support

DPAA2 is a hardware-level networking architecture found in some NXP
SoCs which contain hardware blocks including Management Complex
(MC, a command interface to manipulate D

Add initial DPAA2 support

DPAA2 is a hardware-level networking architecture found in some NXP
SoCs which contain hardware blocks including Management Complex
(MC, a command interface to manipulate DPAA2 objects), Wire Rate I/O
processor (WRIOP, packets distribution, queuing, drop decisions),
Queues and Buffers Manager (QBMan, Rx/Tx queues control, Rx buffer
pools) and the others.

The Management Complex runs NXP-supplied firmware which provides DPAA2
objects as an abstraction layer over those blocks to simplify an
access to the underlying hardware. Each DPAA2 object has its own
driver (to perform an initialization at least) and will be visible
as a separate device in the device tree.

Two new drivers (dpaa2_mc and dpaa2_rc) act like firmware buses in
order to form a hierarchy of the DPAA2 devices:

acpiX (or simplebusX)
dpaa2_mcX
dpaa2_rcX
dpaa2_mcp0
...
dpaa2_mcpN
dpaa2_bpX
dpaa2_macX
dpaa2_io0
...
dpaa2_ioM
dpaa2_niX

dpaa2_mc is suppossed to be a root of the hierarchy, comes in ACPI
and FDT flavours and implements helper interfaces to allocate and
assign bus resources, MSI and "managed" DPAA2 devices (NXP treats some
of the objects as resources for the other DPAA2 objects to let them
function properly). Almost all of the DPAA2 objects are assigned to
the resource containers (dpaa2_rc) to implement isolation.

The initial implementation focuses on the DPAA2 network interface
to be operational. It is the most complex object in terms of
dependencies which uses I/O objects to transmit/receive packets.

Approved by: bz (mentor)
Tested by: manu, bz
MFC after: 3 months
Differential Revision: https://reviews.freebsd.org/D36638

show more ...

dpaa2: Avoid dpaa2_cmd race conditions

struct dpaa2_cmd is no longer malloc'ed, but can be allocated on stack
and initialized with DPAA2_CMD_INIT() on demand. Drivers stopped caching
their DPAA2 com

dpaa2: Avoid dpaa2_cmd race conditions

struct dpaa2_cmd is no longer malloc'ed, but can be allocated on stack
and initialized with DPAA2_CMD_INIT() on demand. Drivers stopped caching
their DPAA2 command objects (and associated tokens) in the software
contexts in order to avoid using them concurrently.

Reviewed by: bz
Approved by: bz (mentor)
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D39509

show more ...

Add initial DPAA2 support

DPAA2 is a hardware-level networking architecture found in some NXP
SoCs which contain hardware blocks including Management Complex
(MC, a command interface to manipulate D

Add initial DPAA2 support

DPAA2 is a hardware-level networking architecture found in some NXP
SoCs which contain hardware blocks including Management Complex
(MC, a command interface to manipulate DPAA2 objects), Wire Rate I/O
processor (WRIOP, packets distribution, queuing, drop decisions),
Queues and Buffers Manager (QBMan, Rx/Tx queues control, Rx buffer
pools) and the others.

The Management Complex runs NXP-supplied firmware which provides DPAA2
objects as an abstraction layer over those blocks to simplify an
access to the underlying hardware. Each DPAA2 object has its own
driver (to perform an initialization at least) and will be visible
as a separate device in the device tree.

Two new drivers (dpaa2_mc and dpaa2_rc) act like firmware buses in
order to form a hierarchy of the DPAA2 devices:

acpiX (or simplebusX)
dpaa2_mcX
dpaa2_rcX
dpaa2_mcp0
...
dpaa2_mcpN
dpaa2_bpX
dpaa2_macX
dpaa2_io0
...
dpaa2_ioM
dpaa2_niX

dpaa2_mc is suppossed to be a root of the hierarchy, comes in ACPI
and FDT flavours and implements helper interfaces to allocate and
assign bus resources, MSI and "managed" DPAA2 devices (NXP treats some
of the objects as resources for the other DPAA2 objects to let them
function properly). Almost all of the DPAA2 objects are assigned to
the resource containers (dpaa2_rc) to implement isolation.

The initial implementation focuses on the DPAA2 network interface
to be operational. It is the most complex object in terms of
dependencies which uses I/O objects to transmit/receive packets.

Approved by: bz (mentor)
Tested by: manu, bz
MFC after: 3 months
Differential Revision: https://reviews.freebsd.org/D36638

show more ...

Add initial DPAA2 support

DPAA2 is a hardware-level networking architecture found in some NXP
SoCs which contain hardware blocks including Management Complex
(MC, a command interface to manipulate D

Add initial DPAA2 support

DPAA2 is a hardware-level networking architecture found in some NXP
SoCs which contain hardware blocks including Management Complex
(MC, a command interface to manipulate DPAA2 objects), Wire Rate I/O
processor (WRIOP, packets distribution, queuing, drop decisions),
Queues and Buffers Manager (QBMan, Rx/Tx queues control, Rx buffer
pools) and the others.

The Management Complex runs NXP-supplied firmware which provides DPAA2
objects as an abstraction layer over those blocks to simplify an
access to the underlying hardware. Each DPAA2 object has its own
driver (to perform an initialization at least) and will be visible
as a separate device in the device tree.

Two new drivers (dpaa2_mc and dpaa2_rc) act like firmware buses in
order to form a hierarchy of the DPAA2 devices:

acpiX (or simplebusX)
dpaa2_mcX
dpaa2_rcX
dpaa2_mcp0
...
dpaa2_mcpN
dpaa2_bpX
dpaa2_macX
dpaa2_io0
...
dpaa2_ioM
dpaa2_niX

dpaa2_mc is suppossed to be a root of the hierarchy, comes in ACPI
and FDT flavours and implements helper interfaces to allocate and
assign bus resources, MSI and "managed" DPAA2 devices (NXP treats some
of the objects as resources for the other DPAA2 objects to let them
function properly). Almost all of the DPAA2 objects are assigned to
the resource containers (dpaa2_rc) to implement isolation.

The initial implementation focuses on the DPAA2 network interface
to be operational. It is the most complex object in terms of
dependencies which uses I/O objects to transmit/receive packets.

Approved by: bz (mentor)
Tested by: manu, bz
MFC after: 3 months
Differential Revision: https://reviews.freebsd.org/D36638

show more ...