sys: Automated cleanup of cdefs and other formatting

Apply the following automated changes to try to eliminate
no-longer-needed sys/cdefs.h includes as well as now-empty
blank lines in a row.

Remov

sys: Automated cleanup of cdefs and other formatting

Apply the following automated changes to try to eliminate
no-longer-needed sys/cdefs.h includes as well as now-empty
blank lines in a row.

Remove /^#if.*\n#endif.*\n#include\s+<sys/cdefs.h>.*\n/
Remove /\n+#include\s+<sys/cdefs.h>.*\n+#if.*\n#endif.*\n+/
Remove /\n+#if.*\n#endif.*\n+/
Remove /^#if.*\n#endif.*\n/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/types.h>/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/param.h>/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/capsicum.h>/

Sponsored by: Netflix

show more ...

sys: Remove $FreeBSD$: one-line .c pattern

Remove /^[\s*]*__FBSDID\("\$FreeBSD\$"\);?\s*\n/

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.

Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix

show more ...

hpt*: Remove unused devclass arguments to DRIVER_MODULE.

hptiop: Store softc pointer in si_drv1 of cdev.

Rather than fetching the softc using the controller's unit number as
an index into the devclass.

Reviewed by: imp
Differential Revision: https://revi

hptiop: Store softc pointer in si_drv1 of cdev.

Rather than fetching the softc using the controller's unit number as
an index into the devclass.

Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D34993

show more ...

hptiop: Remove Giant locking around ioctls.

The methods have their own locking and don't require Giant.

MFC after: 2 weeks

Fix "set but not used" for hptiop

Sponsored by: Rubicon Communications, LLC ("Netgate")

cam: clear on-stack CCBs in last few drivers

This changes ahc(4), ahd(4), hptiop(4), hptnr(4), hptrr(4),
and ps3cdrom(4).

Reviewed By: imp
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
Diffe

cam: clear on-stack CCBs in last few drivers

This changes ahc(4), ahd(4), hptiop(4), hptnr(4), hptrr(4),
and ps3cdrom(4).

Reviewed By: imp
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D30305

show more ...

sys/dev: further adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error

sys/dev: further adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

show more ...

sys/dev: Replace zero with NULL for pointers.

Makes things easier to read, plus architectures may set NULL to something
different than zero.

Found with: devel/coccinelle
MFC after: 3 weeks

Always null-terminate ccb_pathinq.(sim_vid|hba_vid|dev_name)

The sim_vid, hba_vid, and dev_name fields of struct ccb_pathinq are
fixed-length strings. AFAICT the only place they're read is in
sbin/c

Always null-terminate ccb_pathinq.(sim_vid|hba_vid|dev_name)

The sim_vid, hba_vid, and dev_name fields of struct ccb_pathinq are
fixed-length strings. AFAICT the only place they're read is in
sbin/camcontrol/camcontrol.c, which assumes they'll be null-terminated.
However, the kernel doesn't null-terminate them. A bunch of copy-pasted code
uses strncpy to write them, and doesn't guarantee null-termination. For at
least 4 drivers (mpr, mps, ciss, and hyperv), the hba_vid field actually
overflows. You can see the result by doing "camcontrol negotiate da0 -v".

This change null-terminates those fields everywhere they're set in the
kernel. It also shortens a few strings to ensure they'll fit within the
16-character field.

PR: 215474
Reported by: Coverity
CID: 1009997 1010000 1010001 1010002 1010003 1010004 1010005
CID: 1331519 1010006 1215097 1010007 1288967 1010008 1306000
CID: 1211924 1010009 1010010 1010011 1010012 1010013 1010014
CID: 1147190 1010017 1010016 1010018 1216435 1010020 1010021
CID: 1010022 1009666 1018185 1010023 1010025 1010026 1010027
CID: 1010028 1010029 1010030 1010031 1010033 1018186 1018187
CID: 1010035 1010036 1010042 1010041 1010040 1010039
Reviewed by: imp, sephe, slm
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D9037
Differential Revision: https://reviews.freebsd.org/D9038

show more ...

Use imin() macro from sys/libkern.h.

MFC after: 2 weeks.

etc: minor spelling fixes.

Mostly comments but also some user-visible strings.

MFC after: 2 weeks

Replace several bus_alloc_resource() calls using default arguments with bus_alloc_resource_any()

Since these calls only use default arguments, bus_alloc_resource_any() is the
right call.

Differenti

Replace several bus_alloc_resource() calls using default arguments with bus_alloc_resource_any()

Since these calls only use default arguments, bus_alloc_resource_any() is the
right call.

Differential Revision: https://reviews.freebsd.org/D5306

show more ...

Various fixes to hptiop(4):
- Use callout(9) instead of timeout(9).
- Use the existing hba lock as the CAM sim lock instead of Giant.
- Mark interrupt handler MPSAFE.
- Reorder detach and destroy the

Various fixes to hptiop(4):
- Use callout(9) instead of timeout(9).
- Use the existing hba lock as the CAM sim lock instead of Giant.
- Mark interrupt handler MPSAFE.
- Reorder detach and destroy the hba lock in detach.

Reviewed by: Steve Chang <ychang@highpoint-tech.com>

show more ...

Adjust various SCSI drivers to handle either a 32-bit or 64-bit lun_id_t,
mostly by adjustments to debugging printf() format specifiers. For high
numbered LUNs, also switch to printing them in hex as

Adjust various SCSI drivers to handle either a 32-bit or 64-bit lun_id_t,
mostly by adjustments to debugging printf() format specifiers. For high
numbered LUNs, also switch to printing them in hex as per SAM-5.

MFC after: 2 weeks

show more ...

Re-do r255853. Along with adding back the API/ABI changes from the
original, this hides the contents of cam_compat.h from ktrace/kdump/truss,
avoiding problems there. There are no user-servicable p

Re-do r255853. Along with adding back the API/ABI changes from the
original, this hides the contents of cam_compat.h from ktrace/kdump/truss,
avoiding problems there. There are no user-servicable parts in there, so
no need for those tools to be groping around in there.

Approved by: re

show more ...

Revert r255853 pending fixes to build errors in usr.bin/kdump

Approved by: re (implicit)

Update the CAM API for FreeBSD 10:

- Remove the timeout_ch field. It's been deprecated since FreeBSD 7.0;
MPSAFE drivers should be managing their own timeout storage. The
remaining non-MPSAFE

Update the CAM API for FreeBSD 10:

- Remove the timeout_ch field. It's been deprecated since FreeBSD 7.0;
MPSAFE drivers should be managing their own timeout storage. The
remaining non-MPSAFE drivers have been modified to also manage their own
storage, and should be considered for updating to MPSAFE (or removal)
during the FreeBSD 10.x lifecycle.

- Add fields related to soft timeouts and quality of service, to be used
in upcoming work.

- Add room for more flags in the CCB header and path_inq structures.

- Begin support for extended 64-bit LUNs.

- Bump the CAM version number to 0x18, but add compat shims. Tested with
camcontrol and smartctl.

Reviewed by: nathanw, ken, kib
Approved by: re
Obtained from: Netflix

show more ...

Add PCI IDs for HighPoint RocketRAID 4521, 3620, 3622 and 3640
controllers. Update the hptiop(4) manual page to reflect this
as well as mentioning that some cards are already end-of-life.

Many than

Add PCI IDs for HighPoint RocketRAID 4521, 3620, 3622 and 3640
controllers. Update the hptiop(4) manual page to reflect this
as well as mentioning that some cards are already end-of-life.

Many thanks to Highpoint for providing this driver update.

MFC after: 1 day

show more ...

Remove ancient compatibility cruft.

Reviewed by: delphij

Add missing braces

Reviewed by: swildner@dragonflybsd.org
Reviewed by: delphij

Add missing braces.

Submitted by: Sascha Wildner <saw online de>
Obtained from: DragonFly
MFC after: 1 week

MFprojects/camlock r248982:
Stop abusing xpt_periph in random plases that really have no periph related
to CCB, for example, bus scanning. NULL value is fine in such cases and it
is correctly logged

MFprojects/camlock r248982:
Stop abusing xpt_periph in random plases that really have no periph related
to CCB, for example, bus scanning. NULL value is fine in such cases and it
is correctly logged in debug messages as "noperiph". If at some point we
need some real XPT periphs (alike to pmpX now), quite likely they will be
per-bus, and not a single global instance as xpt_periph now.

show more ...

Reform the busdma API so that new types may be added without modifying
every architecture's busdma_machdep.c. It is done by unifying the
bus_dmamap_load_buffer() routines so that they may be called

Reform the busdma API so that new types may be added without modifying
every architecture's busdma_machdep.c. It is done by unifying the
bus_dmamap_load_buffer() routines so that they may be called from MI
code. The MD busdma is then given a chance to do any final processing
in the complete() callback.

The cam changes unify the bus_dmamap_load* handling in cam drivers.

The arm and mips implementations are updated to track virtual
addresses for sync(). Previously this was done in a type specific
way. Now it is done in a generic way by recording the list of
virtuals in the map.

Submitted by: jeff (sponsored by EMC/Isilon)
Reviewed by: kan (previous version), scottl,
mjacob (isp(4), no objections for target mode changes)
Discussed with: ian (arm changes)
Tested by: marius (sparc64), mips (jmallet), isci(4) on x86 (jharris),
amd64 (Fabian Keil <freebsd-listen@fabiankeil.de>)

show more ...