Update the MFI driver to support new "1078" series of hardware. This
includes the upcoming Dell PERC6 series. Many thanks to LSI for
contributing this code.

Submitted by: LSI
Approved by: re

Teach the mfi(4) driver to handle requests from userland management
applications to add and remove volumes.

MFC after: 1 week
Approved by: re (bmah)
Reviewed by: ambrisko, scottl

Add in a couple of things:
- In the ioctl path let command get queued up and return
when complete _without_ blocking the driving waiting for
the response. This way the driver doesn't "lock u

Add in a couple of things:
- In the ioctl path let command get queued up and return
when complete _without_ blocking the driving waiting for
the response. This way the driver doesn't "lock up" for
~30s during a flash command. Submitted by scottl.
- Add a guard so that if a DCMD of 0 is sent down the ioctl
path don't send it to the controller. Return with a
status of OK. This is a little strange since MegaCli
doesn't seem to like something and will issue some DCMD
of 0. This doesn't happen under Linux. So the emulation
needs to be improved but I'm not sure what. Another strange
thing is that when a DCMD of 0 gets issued under i386 the
controller returns OK but in amd64 the context is messed
up.
- Add a guard so the context has to be with-in the legal
limit so we get a reasonable error assertion versus random
panic.

It's going to be a challenge to figure out why MegaCli is not totally
happy and then sends some bogus commands. This means that flashing
firmware via the Linux tool won't work since it generates a DCMD of
0 when it should be opening the firmware for a flash update. Without
this problem flashing works fine. This means there is no publicly
available tool to upgrade the RAID firmware under FreeBSD right now.

I plan to MFC all of the mfi changes to 6.X shortly. This might not
include the SCSI pass-through changes.

Submitted by: scottl
Reviewed by: scottl
MFC after: 3 days

show more ...

Catch up to driver changes required for the mfip sub-driver.

Collapse the mfi_ld object. Add an ioctl to help management apps map
array Id's to FreeBSD device names.

- Add a command validator for use in debugging.
- Fix the locking protocol to eliminate races between normal I/O and AENs.
- Various small improvements and usability tweaks.

Sponsored by: IronPort
P

- Add a command validator for use in debugging.
- Fix the locking protocol to eliminate races between normal I/O and AENs.
- Various small improvements and usability tweaks.

Sponsored by: IronPort
Portions Submitted by: Doug Ambrisko

show more ...

Add a command debugging module and a periodic watchdog timer.

Sponsored by: IronPort

Change some variable names and update some comments to help clarify some
confusing issues.

Instead of using scsi probes to do device discovery, use the firmware
commands to grab the device listing. This resolves issues using
multiple volumes, where each volume was actually internally poin

Instead of using scsi probes to do device discovery, use the firmware
commands to grab the device listing. This resolves issues using
multiple volumes, where each volume was actually internally pointing
to target 0.

show more ...

Add in a bunch of things to the mfi driver:
- Linux ioctl support, with the other Linux changes MegaCli
will run if you mount linprocfs & linsysfs then set
sysctl compat.linux.osrelease=2.6.1

Add in a bunch of things to the mfi driver:
- Linux ioctl support, with the other Linux changes MegaCli
will run if you mount linprocfs & linsysfs then set
sysctl compat.linux.osrelease=2.6.12 or similar. This works
on i386. It should work on amd64 but not well tested yet.
StoreLib may or may not work. Remember to kldload mfi_linux.
- Add in AEN (Async Event Notification) support so we can
get messages from the firmware when something happens.
Not all messages are in defined in event detail. Use
event_log to try to figure out what happened.
- Try to implement something like SIGIO for StoreLib. Since
mrmonitor doesn't work right I can't fully test it. StoreLib
works best with the rh9 base. In theory mrmonitor isn't
needed due to native driver support of AEN :-)
Now we can configure and monitor the RAID better.

Submitted by: IronPort Systems.

show more ...

Add a driver for the new LSI MegaRAID SAS controller family. The 'MFI' name
is derived from the phrase 'MegaRAID Firmware Interface' used by LSI. This
driver provides a block interface to logical d

Add a driver for the new LSI MegaRAID SAS controller family. The 'MFI' name
is derived from the phrase 'MegaRAID Firmware Interface' used by LSI. This
driver provides a block interface to logical disks on the card and a minimal
management device. It is MPSAFE, INTR_FAST, and 64-bit capable.

Thanks to Dell for providing hardware to test with and IronPort for
sponsoring the work.

Sponsored by: Dell, Ironport
MFC After: 3 days

show more ...

spdx: Simplify BSD-2-Clause AND BSD-2-Clause

After removing the -FreeBSD and -NetBSD, we're left with a nuber of
BSD-2-Clause AND BSD-2-Clause, so tidy that up.

Discussed with: pfg
MFC After: 3 d

spdx: Simplify BSD-2-Clause AND BSD-2-Clause

After removing the -FreeBSD and -NetBSD, we're left with a nuber of
BSD-2-Clause AND BSD-2-Clause, so tidy that up.

Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix

show more ...

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.

Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix

show more ...

mfi: clean up empty lines in .c and .h files

sys/dev: further adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error

sys/dev: further adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

show more ...

Add support for the unmapped i/o to mfi(4).

Tested by: Nicholas Esborn <nick@desert.net>
Sponsored by: The FreeBSD Foundation
MFC after: 1 week

Add support for MegaRAID Fury cards. The main change needed to boot from a
9341-4i controller was to ensure that scatter/gather lists are ended with
an end-of-list marker. Both the mrsas and Linux me

Add support for MegaRAID Fury cards. The main change needed to boot from a
9341-4i controller was to ensure that scatter/gather lists are ended with
an end-of-list marker. Both the mrsas and Linux megaraid_sas drivers use
this marker with Invader cards as well, so we do the same thing, though
it is apparently not strictly necessary.

Reviewed by: ambrisko
Tested by: ambrisko (Invader card)
MFC after: 3 weeks
Sponsored by: Sandvine Inc.

show more ...

Add a tunable "hw.mfi.mrsas_enable" to allow mfi(4) to drop priority and
allow mrsas(4) from LSI to attach to newer LSI cards that are support by
mrsas(4). If mrsas(4) is not loaded into the system

Add a tunable "hw.mfi.mrsas_enable" to allow mfi(4) to drop priority and
allow mrsas(4) from LSI to attach to newer LSI cards that are support by
mrsas(4). If mrsas(4) is not loaded into the system at boot then mfi(4)
will always attach. If a modified mrsas(4) is loaded in the system. That
modification is return "-30" in it's probe since that is between
BUS_PROBE_DEFAULT and BUS_PROBE_LOW_PRIORITY.

This option is controller by a new probe flag "MFI_FLAGS_MRSAS" in mfi_ident
that denotes cards that should work with mrsas(4). New entries that should
have this option.

This is the first step to get mrsas(4) checked into FreeBSD and to avoid
collision with people that use mrsas(4) from LSI. Since mfi(4) takes
priority, then mrsas(4) users need to rebuild GENERIC. Using the
.disabled="1" method doesn't work since that blocks attaching and the
probe gave it to mfi(4).

Discussed with: LSI (Kashyap Desai)

show more ...

Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0
without first removing the command from the relavent queue.

This was causing panics in the queue functions which check to

Fixes queuing issues where mfi_release_command blindly sets the cm_flags = 0
without first removing the command from the relavent queue.

This was causing panics in the queue functions which check to ensure a command
is not on another queue.

Fixed some cases where the error from mfi_mapcmd was lost and where the command
was never released / dequeued in error cases.

Ensure that all failures to mfi_mapcmd are logged.

Fixed possible null pointer exception in mfi_aen_setup if mfi_get_log_state
failed.

Fixed mfi_parse_entries & mfi_aen_setup not returning possible errors.

Corrected MFI_DUMP_CMDS calls with invalid vars SC vs sc.

Commands which have timed out now set cm_error to ETIMEDOUT and call
mfi_complete which prevents them getting stuck in the busy queue forever.

Fixed possible use of NULL pointer in mfi_tbolt_get_cmd.

Changed output formats to be more easily recognisable when debugging.

Optimised mfi_cmd_pool_tbolt cleanup.

Made information about driver limiting commands always display as for modern
cards this can be severe.

Fixed mfi_tbolt_alloc_cmd out of memory case which previously didnt return an
error.

Added malloc checks for request_desc_pool including free when subsiquent errors
are detected.

Fixed overflow error in SIMD reply descriptor check.

Fixed tbolt_cmd leak in mfi_build_and_issue_cmd if there's an error during IO
build.

Elimintated double checks on sc->mfi_aen_cm & sc->mfi_map_sync_cm in
mfi_shutdown.

Move local hdr calculation after error check in mfi_aen_complete.

Fixed wakeup on NULL in mfi_aen_complete.

Fixed mfi_aen_cm cleanup in mfi_process_fw_state_chg_isr not checking if it was
NULL.

Changed mfi_alloc_commands to error if bus_dmamap_create fails. Previously we
would try to continue with the number of allocated commands but lots of places
in the driver assume sc->mfi_max_fw_cmds is whats available so its unsafe to do
this without lots of changes.

Removed mfi_total_cmds as its no longer used due the above change.

Corrected mfi_tbolt_alloc_cmd to return ENOMEM where appropriate.

Fixed timeouts actually firing at double what they should.

Setting hw.mfi.max_cmds=-1 now configures to use the controller max.

A few style (9) fixes e.g. braced single line conditions and double blank lines

Cleaned up queuing macros

Removed invalid queuing tests for multiple queues

Trap and deal with errors when doing sends in mfi_data_cb

Refactored frame sending into one method with error checking of the return
code so we can ensure commands aren't left on the queue after error. This
ensures that mfi_mapcmd & mfi_data_cb leave the queue in a valid state.

Refactored how commands are cleaned up, mfi_release_command now ensures
that all queues and command state is maintained in a consistent state.

Prevent NULL pointer use in mfi_tbolt_complete_cmd

Fixed use of NULL sc->mfi_map_sync_cm in wakeup

Added defines to help with output of mfi_cmd and header flags.

Fixed mfi_tbolt_init_MFI_queue invalidating cm_index of the acquired mfi_cmd.

Reset now reinitialises sync map as well as AEN.

Fixed possible use of NULL pointer in mfi_build_and_issue_cmd

Fixed mfi_tbolt_init_MFI_queue call to mfi_process_fw_state_chg_isr causing
panic on failure.

Ensure that tbolt cards always initialise next_host_reply_index and
free_host_reply_index (based off mfi_max_fw_cmds) on both startup and
reset as per the linux driver.

Fixed mfi_tbolt_complete_cmd not acknowledging unknown commands so
it didn't clear the controller.

Prevent locks from being dropped and re-acquired in the following functions
which was allowing multiple threads to enter critical methods such as
mfi_tbolt_complete_cmd & mfi_process_fw_state_chg_isr:-
* mfi_tbolt_init_MFI_queue
* mfi_aen_complete / mfi_aen_register
* mfi_tbolt_sync_map_info
* mfi_get_log_state
* mfi_parse_entries

The locking for these functions was promoting to higher level methods. This
also fixed MFI_LINUX_SET_AEN_2 which was already acquiring the lock, so would
have paniced for recursive lock.

This also required changing malloc of ld_sync in mfi_tbolt_sync_map_info to
M_NOWAIT which can hence now fail but this was already expected as its return
was being tested.

Removed the assignment of cm_index in mfi_tbolt_init_MFI_queue which breaks
the world if the cmd returned by mfi_dequeue_free isn't the first cmd.

Fixed locking in mfi_data_cb, this is an async callback from bus_dmamap_load
which could hence be called after the caller has dropped the lock. If we
don't have the lock we aquire it and ensure we unlock before returning.

Fixed locking mfi_comms_init when mfi_dequeue_free fails.

Fixed mfi_build_and_issue_cmd not returning tbolt cmds aquired to the pool
on error.

Fixed mfi_abort not dropping the io lock when mfi_dequeue_free fails.

Added hw.mfi.polled_cmd_timeout sysctl that enables tuning of polled
timeouts. This shouldn't be reduced below 50 seconds as its used for
firmware patching which can take quite some time.

Added hw.mfi.fw_reset_test sysctl which is avaliable when compiled with
MFI_DEBUG and allows the testing of controller reset that was provoking a
large number of the issues encountered here.

Reviewed by: Doug Ambrisko
Approved by: pjd (mentor)
MFC after: 1 month

show more ...

Reform the busdma API so that new types may be added without modifying
every architecture's busdma_machdep.c. It is done by unifying the
bus_dmamap_load_buffer() routines so that they may be called

Reform the busdma API so that new types may be added without modifying
every architecture's busdma_machdep.c. It is done by unifying the
bus_dmamap_load_buffer() routines so that they may be called from MI
code. The MD busdma is then given a chance to do any final processing
in the complete() callback.

The cam changes unify the bus_dmamap_load* handling in cam drivers.

The arm and mips implementations are updated to track virtual
addresses for sync(). Previously this was done in a type specific
way. Now it is done in a generic way by recording the list of
virtuals in the map.

Submitted by: jeff (sponsored by EMC/Isilon)
Reviewed by: kan (previous version), scottl,
mjacob (isp(4), no objections for target mode changes)
Discussed with: ian (arm changes)
Tested by: marius (sparc64), mips (jmallet), isci(4) on x86 (jharris),
amd64 (Fabian Keil <freebsd-listen@fabiankeil.de>)

show more ...

Add support for SCSI pass through devices to be attached and
detached.

PR: 172864
Submitted by: rstone@

- Extend the prior commit to use the generic SCSI command building
function use that for JBOD and Thunderbolt disk write command. Now
we only have one implementation in mfi.
- Fix dumping on Thu

- Extend the prior commit to use the generic SCSI command building
function use that for JBOD and Thunderbolt disk write command. Now
we only have one implementation in mfi.
- Fix dumping on Thunderbolt cards. Polled IO commands do not seem to
be normally acknowledged by changing cmd_status to MFI_STAT_OK.
In order to get acknowledgement of the IO is complete, the Thunderbolt
command queue needs to be run through. I added a flag MFI_CMD_SCSI
to indicate this command is being polled and to complete the
Thunderbolt wrapper and indicate the result. This flag needs to be
set in the JBOD case in case if that us using Thunderbolt card.
When in the polling loop check for completed commands.
- Remove mfi_tbolt_is_ldio and just do the check when needed.
- Fix an issue when attaching of disk device happens when a device is
already scheduled to be attached but hasn't attached.
- add a tunable to allow raw disk attachment to CAM via:
hw.mfi.allow_cam_disk_passthrough=1
- fixup aborting of commands (AEN and LD state change). Use a generic
abort function and only wait the command being aborted not both.
Thunderbolt cards don't seem to abort commands so the abort times
out.

show more ...

sys/dev/mfivar.h contains references to MFI_DEBUG, but it never gets turned on unless the file also includes opt_mfi.h.

Submitted by: Andrew Boyer aboyer@averesystems.com
MFC after: 2 weeks

Pointy hat to sleep deprived committer.

Use a *real* variable type instead of one I made up.

Background Music: Queen -- Bicycle Race

Reviewed by: BSDCAN 2012 Hacker Lounge Audience

Fix inappropriate data type for two bus_dmamap_t variables that were causing
PAE to insta-panic on startup. Remove one unused variable that was
commented out.

Reviewed by: ambrisko@
Obtained from:

Fix inappropriate data type for two bus_dmamap_t variables that were causing
PAE to insta-panic on startup. Remove one unused variable that was
commented out.

Reviewed by: ambrisko@
Obtained from: jhb@ peter@ bz@ and countless others during BSDCAN
MFC after: 3 days

show more ...