Improve support for health recovery in mlx5core.

This patch accumulates the following Linux commits:

- 04c0c1ab38e95105d950db5b84e727637e149ce7
net/mlx5: PCI error recovery health care simulation

Improve support for health recovery in mlx5core.

This patch accumulates the following Linux commits:

- 04c0c1ab38e95105d950db5b84e727637e149ce7
net/mlx5: PCI error recovery health care simulation
- 0179720d6be2096b8d0a4d143254ff9e77747daa
net/mlx5: Introduce trigger_health_work function
- 3fece5d676939f42f434c63dfe1bd42d7d94e6f0
net/mlx5: Continue health polling until it is explicitly stopped

Submitted by: Matthew Finlay <matt@mellanox.com>
MFC after: 1 week
Sponsored by: Mellanox Technologies

show more ...

Add call to setup firmware data dump structure during device load in
mlx5core.

Do not consider the inability to create a firmware dump fatal, but
inform about the situation and allow the driver to a

Add call to setup firmware data dump structure during device load in
mlx5core.

Do not consider the inability to create a firmware dump fatal, but
inform about the situation and allow the driver to attach. The device
might not implement the needed VSC, or we might not know the layout of
the registers map. In either case, only firmware dump functionality is
limited, the network operations should be fine.

Submitted by: kib@
MFC after: 1 week
Sponsored by: Mellanox Technologies

show more ...

Add kernel and userspace code to dump the firmware state of supported
ConnectX-4/5 devices in mlx5core.

The dump is obtained by reading a predefined register map from the
non-destructive crspace, ac

Add kernel and userspace code to dump the firmware state of supported
ConnectX-4/5 devices in mlx5core.

The dump is obtained by reading a predefined register map from the
non-destructive crspace, accessible by the vendor-specific PCIe
capability (VSC). The dump is stored in preallocated kernel memory and
managed by the mlx5tool(8), which communicates with the driver using a
character device node.

The utility allows to store the dump in format
<address> <value>
into a file, to reset the dump content, and to manually initiate the
dump.

A call to mlx5_fwdump() should be added at the places where a dump
must be fetched automatically. The most likely place is right before a
firmware reset request.

Submitted by: kib@
MFC after: 1 week
Sponsored by: Mellanox Technologies

show more ...

Use device_printf() instead of printf() when printing warnings and errors
to dmesg(8) in mlx5core.

Submitted by: Matthew Finlay <matt@mellanox.com>
MFC after: 1 week
Sponsored by: Mellanox Technolog

Use device_printf() instead of printf() when printing warnings and errors
to dmesg(8) in mlx5core.

Submitted by: Matthew Finlay <matt@mellanox.com>
MFC after: 1 week
Sponsored by: Mellanox Technologies

show more ...

Use the autogenerated interface file for all commands in mlx5core.

This patch accumulates the following Linux commits:
- 90b3e38d048f09b22fb50bcd460cea65fd00b2d7
mlx5_core: Modify CQ moderation pa

Use the autogenerated interface file for all commands in mlx5core.

This patch accumulates the following Linux commits:
- 90b3e38d048f09b22fb50bcd460cea65fd00b2d7
mlx5_core: Modify CQ moderation parameters
- 09a7d9eca1a6cf5eb4f9abfdf8914db9dbd96f08
mlx5_core: QP/XRCD commands via mlx5 ifc
- 1a412fb1caa2c1b77719ccb5ed8b0c3c2bc65da7
mlx5_core: Modify QP commands via mlx5 ifc
- ec22eb53106be1472ba6573dc900943f52f8fd1e
mlx5_core: MKey/PSV commands via mlx5 ifc
- 73b626c182dff06867ceba996a819e8372c9b2ce
mlx5_core: EQ commands via mlx5 ifc
- 20ed51c643b6296789a48adc3bc2cc875a1612cf
mlx5_core: Access register and MAD IFC commands via mlx5 ifc
- a533ed5e179cd15512d40282617909d3482a771c
mlx5_core: Pages management commands via mlx5 ifc
- b8a4ddb2e8f44f872fb93bbda2d541b27079fd2b
mlx5_core: Add MLX5_ARRAY_SET64 to fix BUILD_BUG_ON
- af1ba291c5e498973cc325c501dd8da80b234571
mlx5_core: Refactor internal SRQ API
- b06e7de8a9d8d1d540ec122bbdf2face2a211634
mlx5_core: Refactor device capability function
- c4f287c4a6ac489c18afc4acc4353141a8c53070
mlx5_core: Unify and improve command interface

Submitted by: Matthew Finlay <matt@mellanox.com>
MFC after: 1 week
Sponsored by: Mellanox Technologies

show more ...

Updates for PCI and health monitor recovery in mlx5core.
This patch accumulates the following Linux commits:

mlx5_health.c
- 78ccb25861d76a8fc5c678d762180e6918834200
mlx5_core: Fix wrong name in s

Updates for PCI and health monitor recovery in mlx5core.
This patch accumulates the following Linux commits:

mlx5_health.c
- 78ccb25861d76a8fc5c678d762180e6918834200
mlx5_core: Fix wrong name in struct
- 171bb2c560f45c0427ca3776a4c8f4e26e559400
mlx5_core: Update health syndromes
- 0144a95e2ad53a40c62148f44fb0c1f9d2a0d1e9
mlx5_core: Use accessor functions to read from device memory
- ac6ea6e81a80172612e0c9ef93720f371b198918
mlx5_core: Use private health thread for each device
- fd76ee4da55abb21babfc69310d321b9cb9a32e0
mlx5_core: Fix internal error detection conditions
- 2241007b3d783cbdbaa78c30bdb1994278b6f9b9
mlx5: Clear health sick bit when starting health poll
- 712bfef60912d91033cb25739f7444d5b8d8c59f
mlx5: Fix version printout in case of health issue
- 89d44f0a6c732db23b219be708e2fe1e03ee4842
mlx5_core: Add pci error handlers to mlx5_core driver

mlx5_cmd.c
- be87544de8df2b1eb34bcb5e32691287d96f9ec4
mlx5_core: Fix async commands return code
- a31208b1e11df334d443ec8cace7636150bb8ce2
mlx5_core: New init and exit flow for mlx5_core
- 020446e01eebc9dbe7eda038e570ab9c7ab13586
mlx5_core: Prepare cmd interface to system errors handling
- 89d44f0a6c732db23b219be708e2fe1e03ee4842
mlx5_core: Add pci error handlers to mlx5_core driver
- 0d834442cc247c7b3f3bd6019512ae03e96dd99a
mlx5: Fix teardown errors that happen in pci error handler

mlx5_main.c
- 5fc7197d3a256d9c5de3134870304b24892a4908
mlx5: Add pci shutdown callback

Submitted by: Matthew Finlay <matt@mellanox.com>
MFC after: 1 week
Sponsored by: Mellanox Technologies

show more ...

Update the MLX5 core module:
- Add new firmware commands and update existing ones.
- Add more firmware related structures and update existing ones.
- Some minor fixes, like adding missing \n to some

Update the MLX5 core module:
- Add new firmware commands and update existing ones.
- Add more firmware related structures and update existing ones.
- Some minor fixes, like adding missing \n to some prints.

Sponsored by: Mellanox Technologies
MFC after: 1 week

show more ...

Add mlx5 and mlx5en driver(s) for ConnectX-4 and ConnectX-4LX cards
from Mellanox Technologies. The current driver supports ethernet
speeds up to and including 100 GBit/s. Infiniband support will be

Add mlx5 and mlx5en driver(s) for ConnectX-4 and ConnectX-4LX cards
from Mellanox Technologies. The current driver supports ethernet
speeds up to and including 100 GBit/s. Infiniband support will be
done later.

The code added is not compiled by default, which will be done by a
separate commit.

Sponsored by: Mellanox Technologies
MFC after: 2 weeks

show more ...