syscon: Move syscon code in dev/syscon

We've removed kernel option EXT_RESOURCES almost two years ago.
While it was ok to have some code under a common 'extres' subdirectory
at first, we now have a

syscon: Move syscon code in dev/syscon

We've removed kernel option EXT_RESOURCES almost two years ago.
While it was ok to have some code under a common 'extres' subdirectory
at first, we now have a lot of consumer of it and we made it mandatory
so no need to have it under a cryptic name.

Reviewed by: mhorne
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D43196

show more ...

phy: Move phy code in dev/phy

We've removed kernel option EXT_RESOURCES almost two years ago.
While it was ok to have some code under a common 'extres' subdirectory
at first, we now have a lot of co

phy: Move phy code in dev/phy

We've removed kernel option EXT_RESOURCES almost two years ago.
While it was ok to have some code under a common 'extres' subdirectory
at first, we now have a lot of consumer of it and we made it mandatory
so no need to have it under a cryptic name.

Reviewed by: emaste, imp
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D43195

show more ...

clk: Move clock code in dev/clk

We've removed kernel option EXT_RESOURCES almost two years ago.
While it was ok to have some code under a common 'extres' subdirectory
at first, we now have a lot of

clk: Move clock code in dev/clk

We've removed kernel option EXT_RESOURCES almost two years ago.
While it was ok to have some code under a common 'extres' subdirectory
at first, we now have a lot of consumer of it and we made it mandatory
so no need to have it under a cryptic name.

Reviewed by: mhorne
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D43191

show more ...

sys: Automated cleanup of cdefs and other formatting

Apply the following automated changes to try to eliminate
no-longer-needed sys/cdefs.h includes as well as now-empty
blank lines in a row.

Remov

sys: Automated cleanup of cdefs and other formatting

Apply the following automated changes to try to eliminate
no-longer-needed sys/cdefs.h includes as well as now-empty
blank lines in a row.

Remove /^#if.*\n#endif.*\n#include\s+<sys/cdefs.h>.*\n/
Remove /\n+#include\s+<sys/cdefs.h>.*\n+#if.*\n#endif.*\n+/
Remove /\n+#if.*\n#endif.*\n+/
Remove /^#if.*\n#endif.*\n/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/types.h>/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/param.h>/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/capsicum.h>/

Sponsored by: Netflix

show more ...

sdhci: fdt: Correctly export clock per the binding

The binding says that we can have one or two clocks to export.
The first one is the actual sdclock while the second is the sample clock.
Both have

sdhci: fdt: Correctly export clock per the binding

The binding says that we can have one or two clocks to export.
The first one is the actual sdclock while the second is the sample clock.
Both have the same parent, clk_xin.
Correctly export the clocks for RK3399 and ZynqMP.
No need to use a high ID as before, we have our own clock domain so use
ids starting at 1 as all exported clocks should be.

Reviewed-by: bz
Differential Revision: https://reviews.freebsd.org/D41810
Sponsored by: Beckhoff Automation GmbH & Co. KG

show more ...

sdhci: fdt: Always try to get the phy and the syscon

Per the bindings the phy and the syscon can always be present not just
for RK3399.

Reviewed-by: bz
Differiential Revision: https://reviews.freeb

sdhci: fdt: Always try to get the phy and the syscon

Per the bindings the phy and the syscon can always be present not just
for RK3399.

Reviewed-by: bz
Differiential Revision: https://reviews.freebsd.org/D41809
Sponsored by: Beckhoff Automation GmbH & Co. KG

show more ...

sdhci: fdt: Always enable clock for ZynqMP and RK3399

Those two (in fact all of the supported one in this driver except RK3568) always
needs the clocks to be enabled.

Reviewed-by: bz
Differential R

sdhci: fdt: Always enable clock for ZynqMP and RK3399

Those two (in fact all of the supported one in this driver except RK3568) always
needs the clocks to be enabled.

Reviewed-by: bz
Differential Revision: https://reviews.freebsd.org/D41808
Sponsored by: Beckhoff Automation GmbH & Co. KG

show more ...

sdhci: fdt: Remove sdhci_generic compatible string

This was used when we had our own DTS, it's not used anymore.

Reviewed-by: bz
Differential Revision: https://reviews.freebsd.org/D41807
Sponsored

sdhci: fdt: Remove sdhci_generic compatible string

This was used when we had our own DTS, it's not used anymore.

Reviewed-by: bz
Differential Revision: https://reviews.freebsd.org/D41807
Sponsored by: Beckhoff Automation GmbH & Co. KG

show more ...

sys: Remove $FreeBSD$: one-line .c pattern

Remove /^[\s*]*__FBSDID\("\$FreeBSD\$"\);?\s*\n/

sdhci: Add support for disable-wp

Some platform needs it when the WP pin is broken.

Sponsored by: Beckhoff Automation GmbH & Co. KG
MFC after: 2 weeks

sdhci: xilinx: Add compatible and quirks for ZynqMP

Sponsored by: Beckhoff Automation GmbH & Co. KG
MFC after: 2 weeks

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.

Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix

show more ...

Add support for Rockchip RK3568 SDHCI controller.

sdhci: Remove unused devclass arguments to DRIVER_MODULE.

sdhci: Make ext_resources non-optional

EXT_RESOURCES have been introduced in 12-CURRENT and all supported
releases have it enabled in their kernel config.

MFC after: 1 month
Differential Revis

sdhci: Make ext_resources non-optional

EXT_RESOURCES have been introduced in 12-CURRENT and all supported
releases have it enabled in their kernel config.

MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D33824

show more ...

sdhci: clean up empty lines in .c and .h files

Add emmc support for Rockchip RK3399 SoC.
Tested on NanoPC-T4 board.

Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D20156

o Don't allocate resources for SDMA in sdhci(4) if the controller or the
front-end doesn't support SDMA or the latter implements a platform-
specific transfer method instead. While at it, factor

o Don't allocate resources for SDMA in sdhci(4) if the controller or the
front-end doesn't support SDMA or the latter implements a platform-
specific transfer method instead. While at it, factor out allocation
and freeing of SDMA resources to sdhci_dma_{alloc,free}() in order to
keep the code more readable when adding support for ADMA variants.

o Base the size of the SDMA bounce buffer on MAXPHYS up to the maximum
of 512 KiB instead of using a fixed 4-KiB-buffer. With the default
MAXPHYS of 128 KiB and depending on the controller and medium, this
reduces the number of SDHCI interrupts by a factor of ~16 to ~32 on
sequential reads while an increase of throughput of up to ~84 % was
seen.

Front-ends for broken controllers that only support an SDMA buffer
boundary of a specific size may set SDHCI_QUIRK_BROKEN_SDMA_BOUNDARY
and supply a size via struct sdhci_slot. According to Linux, only
Qualcomm MSM-type SDHCI controllers are affected by this, though.

Requested by: Shreyank Amartya (unconditional bump to 512 KiB)

o Introduce a SDHCI_DEPEND macro for specifying the dependency of the
front-end modules on the sdhci(4) one and bump the module version
of sdhci(4) to 2 via an also newly introduced SDHCI_VERSION in order
to ensure that all components are in sync WRT struct sdhci_slot.

o In sdhci(4):
- Make pointers const were applicable,
- replace a few device_printf(9) calls with slot_printf() for
consistency, and
- sync some local functions with their prototypes WRT static.

show more ...

arm64: GENERIC-MMCCAM: Fix build and module depend

Fix the build of the GENERIC-MMCCAM kernel config after the sdhci_xenon
driver was commited.
While here correct sdhci_fdt and tegra_sdhci, even wit

arm64: GENERIC-MMCCAM: Fix build and module depend

Fix the build of the GENERIC-MMCCAM kernel config after the sdhci_xenon
driver was commited.
While here correct sdhci_fdt and tegra_sdhci, even with MMCCAM they do
need to depend on sdhci(4)

Reported by: Reshetnikov Dmitriy <genserg@hotmail.com>
Approved by: re (kib)
Sponsored by: Rubicon Communications, LLC ("NetGate")

show more ...

Fix build when option MMCCAM is defined.

Add support for SDHCI controller found in Qualcomm Snapdragon 410e.

Tested on DragonBoard 410c.

Sponsored by: DARPA, AFRL

sys/dev: further adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error

sys/dev: further adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

show more ...

Add the Marvell SDHCI controller to the list of supported devices in
sdhci_fdt.

Enable the SDHCI controller, bus and devices on ARMADA38X kernel.

Tested on: ClearFog Pro
Reviewed by: Marcin Wojtas

Add the Marvell SDHCI controller to the list of supported devices in
sdhci_fdt.

Enable the SDHCI controller, bus and devices on ARMADA38X kernel.

Tested on: ClearFog Pro
Reviewed by: Marcin Wojtas <mw at semihalf.com>
Sponsored by: Rubicon Communications, LLC (Netgate)
Differential Revision: https://reviews.freebsd.org/D10606

show more ...

Add support for the no-1-8-v and wp-inverted properties in generic SDHCI
FDT glue.

MFC after: 2 weeks
Sponsored by: Rubicon Communications, LLC (Netgate)

Add and use a MMC_DECLARE_BRIDGE macro for declaring mmc(4) bridges
as kernel drivers and their dependency onto mmc(4); this allows for
incrementing the mmc(4) module version but also for entire omis

Add and use a MMC_DECLARE_BRIDGE macro for declaring mmc(4) bridges
as kernel drivers and their dependency onto mmc(4); this allows for
incrementing the mmc(4) module version but also for entire omission
of these bridge declarations for mmccam(4) in a single place, i. e.
in dev/mmc/bridge.h.

show more ...