usbdevs: add Ralink RT7601 aka MT7601

This is a popular USB WiFi chip.
Unfortunately, it's not supported by FreeBSD yet.

usbdevs: add quirk for WD MyPassport Ultra External HDD

WD MyPassport Ultra External HDD needs quirk
UQ_MSC_NO_TEST_UNIT_READY to attach.

MFC after: 3 days

usb: add quirks for the Genesys GL3220 card reader

Without these, card hotplugging does not work on the GL3220.

PR: 263868
Fixes: 520b88860d7a79 ("usb(4): Automagically apply all quirks [...]")

usb: add necessary quirks for the NOREL Systems NS1081 SD reader

Without these, the Norelsys NS1081 is completely defunct.

PR: 263868
Fixes: 520b88860d7a79 ("usb(4): Automagically apply all quirks

usb: add necessary quirks for the NOREL Systems NS1081 SD reader

Without these, the Norelsys NS1081 is completely defunct.

PR: 263868
Fixes: 520b88860d7a79 ("usb(4): Automagically apply all quirks [...]")

show more ...

sys: Remove $FreeBSD$: one-line bare tag

Remove /^\s*\$FreeBSD\$$\n/

ure(4): add support for Thinkpad Hybrid USB-C with USB-A dock

Add support for LAN port found on Thinkpad Hybrid USB-C with USB-A dock.
While here fix a small typo
- s/UBS/USB/

Sponsored by: Techn

ure(4): add support for Thinkpad Hybrid USB-C with USB-A dock

Add support for LAN port found on Thinkpad Hybrid USB-C with USB-A dock.
While here fix a small typo
- s/UBS/USB/

Sponsored by: Technical University of Munich
Reviewed by: markj
MFC after: 2 weeks
Pull Request: https://github.com/freebsd/freebsd-src/pull/791

show more ...

usb: Fixed botched spacing

Fixes: d3a83456e1e3 ("Add vendor id for Quectel USB modem and align with quectel marketing names.")

Add vendor id for Quectel USB modem and align with quectel marketing names.

Reviewed by: imp
Pull Request: https://github.com/freebsd/freebsd-src/pull/750

bcm5974(4): add Magic Trackpad 2 (USB only) support

The MT2 uses a compact report format, but otherwise is similar in many
ways to the internal trackpads, it even uses the same mode switching
comman

bcm5974(4): add Magic Trackpad 2 (USB only) support

The MT2 uses a compact report format, but otherwise is similar in many
ways to the internal trackpads, it even uses the same mode switching
commands.

Reviewed by: wulf
MFC after: 1 month
Differential revision: https://reviews.freebsd.org/D34437

show more ...

u3g(4): Add device ID for the Quectel EM160R

Also add the EM160R to the man page, noting the work-around
required to make it function properly in PPP mode.

MFC-After: 1 week
Sponsored by: Metify In

u3g(4): Add device ID for the Quectel EM160R

Also add the EM160R to the man page, noting the work-around
required to make it function properly in PPP mode.

MFC-After: 1 week
Sponsored by: Metify Inc.
Sponsored by: Klara Inc.

show more ...

usbdevs: Add APC Smart-UPS1000

MFC after: 1 week

usbdevs: Remove duplicate APC entries

MFC after: 1 week

usb/u3g: Add support for QUECTEL EP06-E 4G modem

Add QUECTEL EP06-E modem support via USB for FreeBSD.
Tested and works like a ppp on FreeBSD-13.

Reviewed by: imp
PR: 269326

usb: Remove obsolete Huawei 3G from usbdevs

- remove Huawei 3G E3131 (E3131_INIT):
- frees up 0x1505/0x14fe shared IDs => product is EOL (since...)
- 3G networks are shutdown/scheduled
- E3131 de

usb: Remove obsolete Huawei 3G from usbdevs

- remove Huawei 3G E3131 (E3131_INIT):
- frees up 0x1505/0x14fe shared IDs => product is EOL (since...)
- 3G networks are shutdown/scheduled
- E3131 devices will still work the same via scsi_huawei_eject2
- new 4G devices will switch & report correctly now

Reviewed by: imp
Pull Request: https://github.com/freebsd/freebsd-src/pull/633

show more ...

usb: Add Huawei 4G Modem devices (2022) to usbdevs

ADD [sys/dev/usb/usbdevs]
- add new Huawei 4G E3372_NCM 0x1505
- add new Huawei 4G E3372v153_NCM 0x155f
- add new Huawei 4G E5573Cs322_NCM 0x155e

usb: Add Huawei 4G Modem devices (2022) to usbdevs

ADD [sys/dev/usb/usbdevs]
- add new Huawei 4G E3372_NCM 0x1505
- add new Huawei 4G E3372v153_NCM 0x155f
- add new Huawei 4G E5573Cs322_NCM 0x155e
- add new Huawei 4G E5573Cs322_ECM 0x14db
- add new Huawei 4G E5573Cs322_ACM 0x1442

Reviewed by: imp
Pull Request: https://github.com/freebsd/freebsd-src/pull/633

show more ...

umodem: ignore CDC_CM descriptor for baltech smartcard reader

The CDC_CM descriptor points to the wrong interface for serial port use.
Ignore it to use the CDC_UNION descriptor.

usbconfig dump (spe

umodem: ignore CDC_CM descriptor for baltech smartcard reader

The CDC_CM descriptor points to the wrong interface for serial port use.
Ignore it to use the CDC_UNION descriptor.

usbconfig dump (spec at: https://usb.org/sites/default/files/CDC1.2_WMC1.1_012011.zip):
ugen0.2: <Baltech AG Smartcard Reader> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON (300mA)

bLength = 0x0012
bDescriptorType = 0x0001
bcdUSB = 0x0200
bDeviceClass = 0x0000 <Probed by interface class>
bDeviceSubClass = 0x0000
bDeviceProtocol = 0x0000
bMaxPacketSize0 = 0x0040
idVendor = 0x13ad
idProduct = 0xf019
bcdDevice = 0x0100
iManufacturer = 0x0001 <Baltech AG>
iProduct = 0x0002 <Smartcard Reader>
iSerialNumber = 0x0003 <45031910>
bNumConfigurations = 0x0001

Configuration index 0

bLength = 0x0009
bDescriptorType = 0x0002
wTotalLength = 0x0064
bNumInterfaces = 0x0003
bConfigurationValue = 0x0001
iConfiguration = 0x0000 <no string>
bmAttributes = 0x0080
bMaxPower = 0x0096

Interface 0
bLength = 0x0009
bDescriptorType = 0x0004
bInterfaceNumber = 0x0000
bAlternateSetting = 0x0000
bNumEndpoints = 0x0001
bInterfaceClass = 0x0003 <HID device>
bInterfaceSubClass = 0x0000
bInterfaceProtocol = 0x0000
iInterface = 0x0000 <no string>

Additional Descriptor

bLength = 0x09
bDescriptorType = 0x21
bDescriptorSubType = 0x11
RAW dump:
0x00 | 0x09, 0x21, 0x11, 0x01, 0x00, 0x01, 0x22, 0xd0,
0x08 | 0x00

Endpoint 0
bLength = 0x0007
bDescriptorType = 0x0005
bEndpointAddress = 0x0081 <IN>
bmAttributes = 0x0003 <INTERRUPT>
wMaxPacketSize = 0x0040
bInterval = 0x0001
bRefresh = 0x0000
bSynchAddress = 0x0000

Additional Descriptor

bLength = 0x08
bDescriptorType = 0x0b
bDescriptorSubType = 0x01
RAW dump:
0x00 | 0x08, 0x0b, 0x01, 0x02, 0x02, 0x02, 0x00, 0x00

Interface 1
bLength = 0x0009
bDescriptorType = 0x0004
bInterfaceNumber = 0x0001
bAlternateSetting = 0x0000
bNumEndpoints = 0x0001
bInterfaceClass = 0x0002 <Communication device>
bInterfaceSubClass = 0x0002
bInterfaceProtocol = 0x0000
iInterface = 0x0000 <no string>

Additional Descriptor

bLength = 0x05
bDescriptorType = 0x24
bDescriptorSubType = 0x00
RAW dump:
0x00 | 0x05, 0x24, 0x00, 0x10, 0x01

Additional Descriptor

bLength = 0x04
bDescriptorType = 0x24
bDescriptorSubType = 0x02
RAW dump:
0x00 | 0x04, 0x24, 0x02, 0x00

Additional Descriptor

bLength = 0x05
bDescriptorType = 0x24
bDescriptorSubType = 0x06
RAW dump:
0x00 | 0x05, 0x24, 0x06, 0x01, 0x02

Additional Descriptor

bLength = 0x05
bDescriptorType = 0x24
bDescriptorSubType = 0x01
RAW dump:
0x00 | 0x05, 0x24, 0x01, 0x00, 0x01

Endpoint 0
bLength = 0x0007
bDescriptorType = 0x0005
bEndpointAddress = 0x0085 <IN>
bmAttributes = 0x0003 <INTERRUPT>
wMaxPacketSize = 0x0008
bInterval = 0x0010
bRefresh = 0x0000
bSynchAddress = 0x0000

Interface 2
bLength = 0x0009
bDescriptorType = 0x0004
bInterfaceNumber = 0x0002
bAlternateSetting = 0x0000
bNumEndpoints = 0x0002
bInterfaceClass = 0x000a <CDC-data>
bInterfaceSubClass = 0x0000
bInterfaceProtocol = 0x0000
iInterface = 0x0000 <no string>

Endpoint 0
bLength = 0x0007
bDescriptorType = 0x0005
bEndpointAddress = 0x0086 <IN>
bmAttributes = 0x0002 <BULK>
wMaxPacketSize = 0x0040
bInterval = 0x0000
bRefresh = 0x0000
bSynchAddress = 0x0000

Endpoint 1
bLength = 0x0007
bDescriptorType = 0x0005
bEndpointAddress = 0x0006 <OUT>
bmAttributes = 0x0002 <BULK>
wMaxPacketSize = 0x0040
bInterval = 0x0000
bRefresh = 0x0000
bSynchAddress = 0x0000

Reviewed by: manu
MFC after: 1 week
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D37942

show more ...

Add Windows Dev Kit 2023 support to if_ure

The Windows Dev Kit 2023 has an if_ure NIC with custom vendor and
procuct IDs. Add them to the driver.

Tested by: Robert Clausecker <fuz@fuz.su>
Obtained

Add Windows Dev Kit 2023 support to if_ure

The Windows Dev Kit 2023 has an if_ure NIC with custom vendor and
procuct IDs. Add them to the driver.

Tested by: Robert Clausecker <fuz@fuz.su>
Obtained from: OpenBSD
Sponsored by: Arm Ltd

show more ...

ums(4): Disable vendor usage page button support

for all devices except Kensington Slimblade Trackball as it brokes
some other devices like Contour Rollermouse Red

Add a quirk for it as well.

Repo

ums(4): Disable vendor usage page button support

for all devices except Kensington Slimblade Trackball as it brokes
some other devices like Contour Rollermouse Red

Add a quirk for it as well.

Reported by: Atte Peltomäki <koston_AT_iki_DOT_fi>
PR: 267922
MFC after: 2 weeks

show more ...

USB: add 2 (3) more device IDs for rtw88-usb devices and a quirk

Add DLink DWA-182 rev D1 and generic Realtek RTW8821CU entry found on
a Tenda U10 USB WLAN Stick, AC 650 Mbps (and possibly more devi

USB: add 2 (3) more device IDs for rtw88-usb devices and a quirk

Add DLink DWA-182 rev D1 and generic Realtek RTW8821CU entry found on
a Tenda U10 USB WLAN Stick, AC 650 Mbps (and possibly more devices).
The latter first presents itself as a CD device with Windows drivers
(useless on FreeBSD) first so add a quirk for that we get the wireless
device right away.

MFC after: 2 weeks
While here sort some other Realtek entries by DeviceID.

show more ...

USB id of yet another Lenovo USB-C ethernet dongle.

u3g(4): Add more USB IDs.

Submitted by: malavon <benny.goemans@gmail.com>
MFC after: 1 week
PR: 263700
Sponsored by: NVIDIA Networking

uftdi(4): Add new USB ID.

PR: 265514
MFC after: 1 week
Sponsored by: NVIDIA Networking

Add USB ID and quirks for Huawei E3372

Set UQ_MSC_NO_INQUIRY and UQ_MSC_NO_GETMAXLUN quirks for mass storage,
which is the initial mode of this dongle.
The modem is shipped with at least two firmwar

Add USB ID and quirks for Huawei E3372

Set UQ_MSC_NO_INQUIRY and UQ_MSC_NO_GETMAXLUN quirks for mass storage,
which is the initial mode of this dongle.
The modem is shipped with at least two firmware versions: 10.X and 11.X,
without ability to update to the newer one.
The 11.X version works more or less fine, but the 10.X one resets after
receiving either an SCSI INQUIRY, or a get_max_lun command.
Since both of those are used for automatic quirk detection, this leads
to a reset cycle making the device somewhat unusable.

Sponsored by: Stormshield
Obtained from: Semihalf
Reviewed by: hps, wma
Differential Revision: https://reviews.freebsd.org/D35076

show more ...

ulpt(4): Add support for Epson TM-U220B.

Submitted by: Archimedes Gaviola <archimedes.gaviola@gmail.com>
MFC after: 1 week
Sponsored by: NVIDIA Networking

Add devices and quirks for some Olympus cameras.

Reviewed by: hps@
Fixes: Problems attaching Olympus cameras.
MFC after: 2 weeks