sys: Automated cleanup of cdefs and other formatting

Apply the following automated changes to try to eliminate
no-longer-needed sys/cdefs.h includes as well as now-empty
blank lines in a row.

Remov

sys: Automated cleanup of cdefs and other formatting

Apply the following automated changes to try to eliminate
no-longer-needed sys/cdefs.h includes as well as now-empty
blank lines in a row.

Remove /^#if.*\n#endif.*\n#include\s+<sys/cdefs.h>.*\n/
Remove /\n+#include\s+<sys/cdefs.h>.*\n+#if.*\n#endif.*\n+/
Remove /\n+#if.*\n#endif.*\n+/
Remove /^#if.*\n#endif.*\n/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/types.h>/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/param.h>/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/capsicum.h>/

Sponsored by: Netflix

show more ...

sys: Remove $FreeBSD$: one-line .c pattern

Remove /^[\s*]*__FBSDID\("\$FreeBSD\$"\);?\s*\n/

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.

Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix

show more ...

sys/kern: adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone

sys/kern: adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

show more ...

On multi-core, multi-threaded PPC systems, it is important that the threads
be brought up in the order they are enumerated in the device tree (in
particular, that thread 0 on each core be brought up

On multi-core, multi-threaded PPC systems, it is important that the threads
be brought up in the order they are enumerated in the device tree (in
particular, that thread 0 on each core be brought up first). The SLIST
through which we loop to start the CPUs has all of its entries added with
SLIST_INSERT_HEAD(), which means it is in reverse order of enumeration
and so AP startup would always fail in such situations (causing a machine
check or RTAS failure). Fix this by changing the SLIST into an STAILQ,
and inserting new CPUs at the end.

Reviewed by: jhb

show more ...

Split P_NOLOAD into a per-thread flag (TDF_NOLOAD).
This improvements aims for avoiding further cache-misses in scheduler
specific functions which need to keep track of average thread running
time an

Split P_NOLOAD into a per-thread flag (TDF_NOLOAD).
This improvements aims for avoiding further cache-misses in scheduler
specific functions which need to keep track of average thread running
time and further locking in places setting for this flag.

Reported by: jeff (originally), kris (currently)
Reviewed by: jhb
Tested by: Giuseppe Cocomazzi <sbudella at email dot it>

show more ...

In keeping with style(9)'s recommendations on macros, use a ';'
after each SYSINIT() macro invocation. This makes a number of
lightweight C parsers much happier with the FreeBSD kernel
source, inclu

In keeping with style(9)'s recommendations on macros, use a ';'
after each SYSINIT() macro invocation. This makes a number of
lightweight C parsers much happier with the FreeBSD kernel
source, including cflow's prcc and lxr.

MFC after: 1 month
Discussed with: imp, rink

show more ...

rename the process to 'idle' and 'intr' as per jhb.

Initialise the initial process pointer to NULL so that we know we don't
have an idle process yet.
I'm guessing that on my system this was always 0 already.

found by: Ed Schouten

oops, over optimised and broke non-SMP builds

Introduce a way to make pure kernal threads.
kthread_add() takes the same parameters as the old kthread_create()
plus a pointer to a process structure, and adds a kernel thread
to that process.

kpro

Introduce a way to make pure kernal threads.
kthread_add() takes the same parameters as the old kthread_create()
plus a pointer to a process structure, and adds a kernel thread
to that process.

kproc_kthread_add() takes the parameters for kthread_add,
plus a process name and a pointer to a pointer to a process instead of just
a pointer, and if the proc * is NULL, it creates the process to the
specifications required, before adding the thread to it.

All other old kthread_xxx() calls return, but act on (struct thread *)
instead of (struct proc *). One reason to change the name is so that
any old kernel modules that are lying around and expect kthread_create()
to make a process will not just accidentally link.

fix top to show kernel threads by their thread name in -SH mode
add a tdnam formatting option to ps to show thread names.

make all idle threads actual kthreads and put them into their own idled process.
make all interrupt threads kthreads and put them in an interd process
(mainly for aesthetic and accounting reasons)
rename proc 0 to be 'kernel' and it's swapper thread is now 'swapper'

man page fixes to follow.

show more ...

Rename the kthread_xxx (e.g. kthread_create()) calls
to kproc_xxx as they actually make whole processes.
Thos makes way for us to add REAL kthread_create() and friends
that actually make theads. it t

Rename the kthread_xxx (e.g. kthread_create()) calls
to kproc_xxx as they actually make whole processes.
Thos makes way for us to add REAL kthread_create() and friends
that actually make theads. it turns out that most of these
calls actually end up being moved back to the thread version
when it's added. but we need to make this cosmetic change first.

I'd LOVE to do this rename in 7.0 so that we can eventually MFC the
new kthread_xxx() calls.

show more ...

Commit 14/14 of sched_lock decomposition.
- Use thread_lock() rather than sched_lock for per-thread scheduling
sychronization.
- Use the per-process spinlock rather than the sched_lock for per-p

Commit 14/14 of sched_lock decomposition.
- Use thread_lock() rather than sched_lock for per-thread scheduling
sychronization.
- Use the per-process spinlock rather than the sched_lock for per-process
scheduling synchronization.

Tested by: kris, current@
Tested on: i386, amd64, ULE, 4BSD, libthr, libkse, PREEMPTION, etc.
Discussed with: kris, attilio, kmacy, jhb, julian, bde (small parts each)

show more ...

- Remove setrunqueue and replace it with direct calls to sched_add().
setrunqueue() was mostly empty. The few asserts and thread state
setting were moved to the individual schedulers. sched_a

- Remove setrunqueue and replace it with direct calls to sched_add().
setrunqueue() was mostly empty. The few asserts and thread state
setting were moved to the individual schedulers. sched_add() was
chosen to displace it for naming consistency reasons.
- Remove adjustrunqueue, it was 4 lines of code that was ifdef'd to be
different on all three schedulers where it was only called in one place
each.
- Remove the long ifdef'd out remrunqueue code.
- Remove the now redundant ts_state. Inspect the thread state directly.
- Don't set TSF_* flags from kern_switch.c, we were only doing this to
support a feature in one scheduler.
- Change sched_choose() to return a thread rather than a td_sched. Also,
rely on the schedulers to return the idlethread. This simplifies the
logic in choosethread(). Aside from the run queue links kern_switch.c
mostly does not care about the contents of td_sched.

Discussed with: julian

- Move the idle thread loop into the per scheduler area. ULE wants to
do something different from the other schedulers.

Suggested by: jhb

Tested on: x86/amd64 sched_{4BSD, ULE, CORE}.

show more ...

Threading cleanup.. part 2 of several.

Make part of John Birrell's KSE patch permanent..
Specifically, remove:
Any reference of the ksegrp structure. This feature was
never fully utilised and made t

Threading cleanup.. part 2 of several.

Make part of John Birrell's KSE patch permanent..
Specifically, remove:
Any reference of the ksegrp structure. This feature was
never fully utilised and made things overly complicated.
All code in the scheduler that tried to make threaded programs
fair to unthreaded programs. Libpthread processes will already
do this to some extent and libthr processes already disable it.

Also:
Since this makes such a big change to the scheduler(s), take the opportunity
to rename some structures and elements that had to be moved anyhow.
This makes the code a lot more readable.

The ULE scheduler compiles again but I have no idea if it works.

The 4bsd scheduler still reqires a little cleaning and some functions that now do
ALMOST nothing will go away, but I thought I'd do that as a separate commit.

Tested by David Xu, and Dan Eischen using libthr and libpthread.

show more ...

Use mi_switch, this should fix loadavg calculation problem in NO_KSE case.

Make KSE a kernel option, turned on by default in all GENERIC
kernel configs except sun4v (which doesn't process signals properly
with KSE).

Reviewed by: davidxu@

Divorce critical sections from spinlocks. Critical sections as denoted by
critical_enter() and critical_exit() are now solely a mechanism for
deferring kernel preemptions. They no longer have any a

Divorce critical sections from spinlocks. Critical sections as denoted by
critical_enter() and critical_exit() are now solely a mechanism for
deferring kernel preemptions. They no longer have any affect on
interrupts. This means that standalone critical sections are now very
cheap as they are simply unlocked integer increments and decrements for the
common case.

Spin mutexes now use a separate KPI implemented in MD code: spinlock_enter()
and spinlock_exit(). This KPI is responsible for providing whatever MD
guarantees are needed to ensure that a thread holding a spin lock won't
be preempted by any other code that will try to lock the same lock. For
now all archs continue to block interrupts in a "spinlock section" as they
did formerly in all critical sections. Note that I've also taken this
opportunity to push a few things into MD code rather than MI. For example,
critical_fork_exit() no longer exists. Instead, MD code ensures that new
threads have the correct state when they are created. Also, we no longer
try to fixup the idlethreads for APs in MI code. Instead, each arch sets
the initial curthread and adjusts the state of the idle thread it borrows
in order to perform the initial context switch.

This change is largely a big NOP, but the cleaner separation it provides
will allow for more efficient alternative locking schemes in other parts
of the kernel (bare critical sections rather than per-CPU spin mutexes
for per-CPU data for example).

Reviewed by: grehan, cognet, arch@, others
Tested on: i386, alpha, sparc64, powerpc, arm, possibly more

show more ...

Set the scheduling class of the idle threads to PRI_IDLE.
While there, set their priority with sched_prio() instead of changing it
'by hand'.

Reviewed by: jhb
Approved by: grehan (mentor)

Give the 4bsd scheduler the ability to wake up idle processors
when there is new work to be done.

MFC after: 5 days

Expand the generic, but bogusly formed, copyright notice to include
the license from /usr/src/COPYRIGHT. Since cvs annotate shows that
this was written by jasone, julian, jhb, peter, bmilekic and ob

Expand the generic, but bogusly formed, copyright notice to include
the license from /usr/src/COPYRIGHT. Since cvs annotate shows that
this was written by jasone, julian, jhb, peter, bmilekic and obrien.
cvs log shows that many others may have contributed to this file. As
such, go ahead and use the author of 'FreeBSD Project' for this file.
If this is a problem, please notify me.

# this eliminates the last file in the kernel with an indirect reference
# to /usr/src/COPYRIGHT in the kernel. A few more in userland remain.

show more ...

- Change mi_switch() and sched_switch() to accept an optional thread to
switch to. If a non-NULL thread pointer is passed in, then the CPU will
switch to that thread directly rather than calling

- Change mi_switch() and sched_switch() to accept an optional thread to
switch to. If a non-NULL thread pointer is passed in, then the CPU will
switch to that thread directly rather than calling choosethread() to pick
a thread to choose to.
- Make sched_switch() aware of idle threads and know to do
TD_SET_CAN_RUN() instead of sticking them on the run queue rather than
requiring all callers of mi_switch() to know to do this if they can be
called from an idlethread.
- Move constants for arguments to mi_switch() and thread_single() out of
the middle of the function prototypes and up above into their own
section.

show more ...

Adjust the priority of the idle threads to be the lowest possible
priority. This is just a comestic nit as the idle thread priorities aren't
used by the schedulers.

Reported by: bde

Always set a process' state to normal when it is fully constructed in
fork1() rather than only doing it for the RFSTOPPED case and then having
to fix it up in other places later on.

- Add a flags parameter to mi_switch. The value of flags may be SW_VOL or
SW_INVOL. Assert that one of these is set in mi_switch() and propery
adjust the rusage statistics. This is to simpli

- Add a flags parameter to mi_switch. The value of flags may be SW_VOL or
SW_INVOL. Assert that one of these is set in mi_switch() and propery
adjust the rusage statistics. This is to simplify the large number of
users of this interface which were previously all required to adjust the
proper counter prior to calling mi_switch(). This also facilitates more
switch and locking optimizations.
- Change all callers of mi_switch() to pass the appropriate paramter and
remove direct references to the process statistics.

show more ...