sockets: don't malloc/free sockaddr memory on getpeername/getsockname

Just like it was done for accept(2) in cfb1e92912b4, use same approach
for two simplier syscalls that return socket addresses.

sockets: don't malloc/free sockaddr memory on getpeername/getsockname

Just like it was done for accept(2) in cfb1e92912b4, use same approach
for two simplier syscalls that return socket addresses. Although,
these two syscalls aren't performance critical, this change generalizes
some code between 3 syscalls trimming code size.

Following example of accept(2), provide VNET-aware and INVARIANT-checking
wrappers sopeeraddr() and sosockaddr() around protosw methods.

Reviewed by: tuexen
Differential Revision: https://reviews.freebsd.org/D42694

show more ...

sockets: don't malloc/free sockaddr memory on accept(2)

Let the accept functions provide stack memory for protocols to fill it in.
Generic code should provide sockaddr_storage, specialized code may

sockets: don't malloc/free sockaddr memory on accept(2)

Let the accept functions provide stack memory for protocols to fill it in.
Generic code should provide sockaddr_storage, specialized code may provide
smaller structure.

While rewriting accept(2) make 'addrlen' a true in/out parameter, reporting
required length in case if provided length was insufficient. Our manual
page accept(2) and POSIX don't explicitly require that, but one can read
the text as they do. Linux also does that. Update tests accordingly.

Reviewed by: rscheff, tuexen, zlei, dchagin
Differential Revision: https://reviews.freebsd.org/D42635

show more ...

sys: Remove $FreeBSD$: one-line .h pattern

Remove /^\s*\*+\s*\$FreeBSD\$.*$\n/

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.

Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix

show more ...

protosw: change prototype for pr_control

For some reason protosw.h is used during world complation and userland
is not aware of caddr_t, a relic from the first version of C. Broken
buildworld is go

protosw: change prototype for pr_control

For some reason protosw.h is used during world complation and userland
is not aware of caddr_t, a relic from the first version of C. Broken
buildworld is good reason to get rid of yet another caddr_t in kernel.

Fixes: 886fc1e80490fb03e72e306774766cbb2c733ac6

show more ...

protocols: init with standard SYSINIT(9) or VNET_SYSINIT

The historical BSD network stack loop that rolls over domains and
over protocols has no advantages over more modern SYSINIT(9).
While doing t

protocols: init with standard SYSINIT(9) or VNET_SYSINIT

The historical BSD network stack loop that rolls over domains and
over protocols has no advantages over more modern SYSINIT(9).
While doing the sweep, split global and per-VNET initializers.

Getting rid of pr_init allows to achieve several things:
o Get rid of ifdef's that protect against double foo_init() when
both INET and INET6 are compiled in.
o Isolate initializers statically to the module they init.
o Makes code easier to understand and maintain.

Reviewed by: melifaro
Differential revision: https://reviews.freebsd.org/D33537

show more ...

net: clean up empty lines in .c and .h files

sys: general adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
pro

sys: general adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

No functional change intended.

show more ...

sys/netgraph: spelling fixes in comments.

No functional change.

Use callout(9) instead of timeout(9).

Reviewed by: emax

Get those pesky RFCOMM RPM data bits right. This is likely a noop.

MFC after: 1 month

Change semantics of socket close and detach. Add a new protocol switch
function, pru_close, to notify protocols that the file descriptor or
other consumer of a socket is closing the socket. pru_abo

Change semantics of socket close and detach. Add a new protocol switch
function, pru_close, to notify protocols that the file descriptor or
other consumer of a socket is closing the socket. pru_abort is now a
notification of close also, and no longer detaches. pru_detach is no
longer used to notify of close, and will be called during socket
tear-down by sofree() when all references to a socket evaporate after
an earlier call to abort or close the socket. This means detach is now
an unconditional teardown of a socket, whereas previously sockets could
persist after detach of the protocol retained a reference.

This faciliates sharing mutexes between layers of the network stack as
the mutex is required during the checking and removal of references at
the head of sofree(). With this change, pru_detach can now assume that
the mutex will no longer be required by the socket layer after
completion, whereas before this was not necessarily true.

Reviewed by: gnn

show more ...

Chance protocol switch method pru_detach() so that it returns void
rather than an error. Detaches do not "fail", they other occur or
the protocol flags SS_PROTOREF to take ownership of the socket.

Chance protocol switch method pru_detach() so that it returns void
rather than an error. Detaches do not "fail", they other occur or
the protocol flags SS_PROTOREF to take ownership of the socket.

soclose() no longer looks at so_pcb to see if it's NULL, relying
entirely on the protocol to decide whether it's time to free the
socket or not using SS_PROTOREF. so_pcb is now entirely owned and
managed by the protocol code. Likewise, no longer test so_pcb in
other socket functions, such as soreceive(), which have no business
digging into protocol internals.

Protocol detach routines no longer try to free the socket on detach,
this is performed in the socket code if the protocol permits it.

In rts_detach(), no longer test for rp != NULL in detach, and
likewise in other protocols that don't permit a NULL so_pcb, reduce
the incidence of testing for it during detach.

netinet and netinet6 are not fully updated to this change, which
will be in an upcoming commit. In their current state they may leak
memory or panic.

MFC after: 3 months

show more ...

Change protocol switch pru_abort() API so that it returns void rather
than an int, as an error here is not meaningful. Modify soabort() to
unconditionally free the socket on the return of pru_abort(

Change protocol switch pru_abort() API so that it returns void rather
than an int, as an error here is not meaningful. Modify soabort() to
unconditionally free the socket on the return of pru_abort(), and
modify most protocols to no longer conditionally free the socket,
since the caller will do this.

This commit likely leaves parts of netinet and netinet6 in a situation
where they may panic or leak memory, as they have not are not fully
updated by this commit. This will be corrected shortly in followup
commits to these components.

MFC after: 3 months

show more ...

Push the assignment of a new or updated so_qlimit from solisten()
following the protocol pru_listen() call to solisten_proto(), so
that it occurs under the socket lock acquisition that also sets
SO_A

Push the assignment of a new or updated so_qlimit from solisten()
following the protocol pru_listen() call to solisten_proto(), so
that it occurs under the socket lock acquisition that also sets
SO_ACCEPTCONN. This requires passing the new backlog parameter
to the protocol, which also allows the protocol to be aware of
changes in queue limit should it wish to do something about the
new queue limit. This continues a move towards the socket layer
acting as a library for the protocol.

Bump __FreeBSD_version due to a change in the in-kernel protocol
interface. This change has been tested with IPv4 and UNIX domain
sockets, but not other protocols.

show more ...

Make default RFCOMM session MTU match default L2CAP MTU.

This is just a workaround for a know problem with Motorola E1000
phone. Something is wrong with the configuration of L2CAP/RFCOMM
channel. Ev

Make default RFCOMM session MTU match default L2CAP MTU.

This is just a workaround for a know problem with Motorola E1000
phone. Something is wrong with the configuration of L2CAP/RFCOMM
channel. Even though we set L2CAP MTU to 132 bytes (default RFCOMM
MTU 127 + 5 bytes RFCOMM frame header) and the phone accepts it,
the phone still sends oversized L2CAP packets. It appears that the
phone wants to use bigger (667 bytes) RFCOMM frames, but it does
not segment them according to the configured L2CAP MTU. The 667
bytes RFCOMM frame size corresponds to the default L2CAP MTU of
672 bytes (667 + 5 bytes RFCOMM frame header).

This problem only appears if connection was initiated from the
phone. I'm not sure who is at fault here, so for now just put
workaround in place. Quick look at the spec did not reveal any
anwser.

Tested by: Jes < jjess at freebsd dot polarhome dot com >
MFC after: 3 days

show more ...

/* -> /*- for license, minor formatting changes

Change double include protection style in headers to match
the rest of Netgraph code.

Reviewed by: imp, ru
Approved by: imp (mentor)

Part one of undating the bluetooth code to the newest version

Submitted by: Maksim Yevmenkin <m_evmenkin@yahoo.com>
Approved by: re@

sockets: don't malloc/free sockaddr memory on getpeername/getsockname

Just like it was done for accept(2) in cfb1e92912b4, use same approach
for two simplier syscalls that return socket addresses.

sockets: don't malloc/free sockaddr memory on getpeername/getsockname

Just like it was done for accept(2) in cfb1e92912b4, use same approach
for two simplier syscalls that return socket addresses. Although,
these two syscalls aren't performance critical, this change generalizes
some code between 3 syscalls trimming code size.

Following example of accept(2), provide VNET-aware and INVARIANT-checking
wrappers sopeeraddr() and sosockaddr() around protosw methods.

Reviewed by: tuexen
Differential Revision: https://reviews.freebsd.org/D42694

show more ...

sockets: don't malloc/free sockaddr memory on accept(2)

Let the accept functions provide stack memory for protocols to fill it in.
Generic code should provide sockaddr_storage, specialized code may

sockets: don't malloc/free sockaddr memory on accept(2)

Let the accept functions provide stack memory for protocols to fill it in.
Generic code should provide sockaddr_storage, specialized code may provide
smaller structure.

While rewriting accept(2) make 'addrlen' a true in/out parameter, reporting
required length in case if provided length was insufficient. Our manual
page accept(2) and POSIX don't explicitly require that, but one can read
the text as they do. Linux also does that. Update tests accordingly.

Reviewed by: rscheff, tuexen, zlei, dchagin
Differential Revision: https://reviews.freebsd.org/D42635

show more ...

sys: Remove $FreeBSD$: one-line .h pattern

Remove /^\s*\*+\s*\$FreeBSD\$.*$\n/

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.

Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix

show more ...

protosw: change prototype for pr_control

For some reason protosw.h is used during world complation and userland
is not aware of caddr_t, a relic from the first version of C. Broken
buildworld is go

protosw: change prototype for pr_control

For some reason protosw.h is used during world complation and userland
is not aware of caddr_t, a relic from the first version of C. Broken
buildworld is good reason to get rid of yet another caddr_t in kernel.

Fixes: 886fc1e80490fb03e72e306774766cbb2c733ac6

show more ...

protocols: init with standard SYSINIT(9) or VNET_SYSINIT

The historical BSD network stack loop that rolls over domains and
over protocols has no advantages over more modern SYSINIT(9).
While doing t

protocols: init with standard SYSINIT(9) or VNET_SYSINIT

The historical BSD network stack loop that rolls over domains and
over protocols has no advantages over more modern SYSINIT(9).
While doing the sweep, split global and per-VNET initializers.

Getting rid of pr_init allows to achieve several things:
o Get rid of ifdef's that protect against double foo_init() when
both INET and INET6 are compiled in.
o Isolate initializers statically to the module they init.
o Makes code easier to understand and maintain.

Reviewed by: melifaro
Differential revision: https://reviews.freebsd.org/D33537

show more ...