netlink: dump interface capabilities with other interface data.

This change exports interface capabilities using the standard
Netlink attribute type, bitset, and switches `ifconfig(8)` to use
it whe

netlink: dump interface capabilities with other interface data.

This change exports interface capabilities using the standard
Netlink attribute type, bitset, and switches `ifconfig(8)` to use
it when displaying interface data.
Bitset comes in two representations. The first one is "compact",
where the bits are exported via two arrays - "mask" listing the
"valid" bits and "values, providing the values for those bits.
The second one is more verbose, listing each bit as a separate item,
with its name, id and value. The latter option is handy when submitting
update requests.

The support for setting capabilities will be added in the upcoming diffs.

Differential Revision: https://reviews.freebsd.org/D40331

show more ...

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.

Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix

show more ...

netlink: provide original interface lladdr in the interface dump.

* Store lladdr in the FreeBSD-specific IFLAF_ORIG_HWADDR attr
* Do not export empty IFLA_ADDRESS for interfaces w/o lladdrs.

MFC af

netlink: provide original interface lladdr in the interface dump.

* Store lladdr in the FreeBSD-specific IFLAF_ORIG_HWADDR attr
* Do not export empty IFLA_ADDRESS for interfaces w/o lladdrs.

MFC after: 2 weeks

show more ...

netlink: sync interface IFLA attributes

MFC after: 2 weeks

netlink: improve interface handling

* Separate interface creation from interface modification code
* Support setting some interface attributes (ifdescr, mtu, up/down, promisc)
* Improve interaction

netlink: improve interface handling

* Separate interface creation from interface modification code
* Support setting some interface attributes (ifdescr, mtu, up/down, promisc)
* Improve interaction with the cloners requiring to parse/write custom
interface attributes
* Add bitmask-based way of checking if the attribute is present in the
message
* Don't use multipart RTM_GETLINK replies when searching for the
specific interface names
* Use ENODEV instead of ENOENT in case of failed RTM_GETLINK search
* Add python netlink test helpers
* Add some netlink interface tests

Differential Revision: https://reviews.freebsd.org/D37668

show more ...

netlink: add interface notification on link status / flags change.

* Add link-state change notifications by subscribing to ifnet_link_event.
In the Linux netlink model, link state is reported in 2

netlink: add interface notification on link status / flags change.

* Add link-state change notifications by subscribing to ifnet_link_event.
In the Linux netlink model, link state is reported in 2 places: first is
the IFLA_OPERSTATE, which stores state per RFC2863.
The second is an IFF_LOWER_UP interface flag. As many applications rely
on the latter, reserve 1 bit from if_flags, named as IFF_NETLINK_1.
This flag is mapped to IFF_LOWER_UP in the netlink headers. This is done
to avoid making applications think this flag is actually
supported / presented in non-netlink outputs.
* Add flag change notifications, by hooking into rt_ifmsg().
In the netlink model, notification should include the bitmask for the
change flags. Update rt_ifmsg() to include such bitmask.

Differential Revision: https://reviews.freebsd.org/D37597

show more ...

netlink: add netlink support

Netlinks is a communication protocol currently used in Linux kernel to modify,
read and subscribe for nearly all networking state. Interfaces, addresses, routes,
firew

netlink: add netlink support

Netlinks is a communication protocol currently used in Linux kernel to modify,
read and subscribe for nearly all networking state. Interfaces, addresses, routes,
firewall, fibs, vnets, etc are controlled via netlink.
It is async, TLV-based protocol, providing 1-1 and 1-many communications.

The current implementation supports the subset of NETLINK_ROUTE
family. To be more specific, the following is supported:
* Dumps:
- routes
- nexthops / nexthop groups
- interfaces
- interface addresses
- neighbors (arp/ndp)
* Notifications:
- interface arrival/departure
- interface address arrival/departure
- route addition/deletion
* Modifications:
- adding/deleting routes
- adding/deleting nexthops/nexthops groups
- adding/deleting neghbors
- adding/deleting interfaces (basic support only)
* Rtsock interaction
- route events are bridged both ways

The implementation also supports the NETLINK_GENERIC family framework.

Implementation notes:
Netlink is implemented via loadable/unloadable kernel module,
not touching many kernel parts.
Each netlink socket uses dedicated taskqueue to support async operations
that can sleep, such as interface creation. All message processing is
performed within these taskqueues.

Compatibility:
Most of the Netlink data models specified above maps to FreeBSD concepts
nicely. Unmodified ip(8) binary correctly works with
interfaces, addresses, routes, nexthops and nexthop groups. Some
software such as net/bird require header-only modifications to compile
and work with FreeBSD netlink.

Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D36002
MFC after: 2 months

show more ...

netlink: dump interface capabilities with other interface data.

This change exports interface capabilities using the standard
Netlink attribute type, bitset, and switches `ifconfig(8)` to use
it whe

netlink: dump interface capabilities with other interface data.

This change exports interface capabilities using the standard
Netlink attribute type, bitset, and switches `ifconfig(8)` to use
it when displaying interface data.
Bitset comes in two representations. The first one is "compact",
where the bits are exported via two arrays - "mask" listing the
"valid" bits and "values, providing the values for those bits.
The second one is more verbose, listing each bit as a separate item,
with its name, id and value. The latter option is handy when submitting
update requests.

The support for setting capabilities will be added in the upcoming diffs.

Differential Revision: https://reviews.freebsd.org/D40331

show more ...

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.

Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix

show more ...

netlink: provide original interface lladdr in the interface dump.

* Store lladdr in the FreeBSD-specific IFLAF_ORIG_HWADDR attr
* Do not export empty IFLA_ADDRESS for interfaces w/o lladdrs.

MFC af

netlink: provide original interface lladdr in the interface dump.

* Store lladdr in the FreeBSD-specific IFLAF_ORIG_HWADDR attr
* Do not export empty IFLA_ADDRESS for interfaces w/o lladdrs.

MFC after: 2 weeks

show more ...

netlink: sync interface IFLA attributes

MFC after: 2 weeks

netlink: improve interface handling

* Separate interface creation from interface modification code
* Support setting some interface attributes (ifdescr, mtu, up/down, promisc)
* Improve interaction

netlink: improve interface handling

* Separate interface creation from interface modification code
* Support setting some interface attributes (ifdescr, mtu, up/down, promisc)
* Improve interaction with the cloners requiring to parse/write custom
interface attributes
* Add bitmask-based way of checking if the attribute is present in the
message
* Don't use multipart RTM_GETLINK replies when searching for the
specific interface names
* Use ENODEV instead of ENOENT in case of failed RTM_GETLINK search
* Add python netlink test helpers
* Add some netlink interface tests

Differential Revision: https://reviews.freebsd.org/D37668

show more ...

netlink: add interface notification on link status / flags change.

* Add link-state change notifications by subscribing to ifnet_link_event.
In the Linux netlink model, link state is reported in 2

netlink: add interface notification on link status / flags change.

* Add link-state change notifications by subscribing to ifnet_link_event.
In the Linux netlink model, link state is reported in 2 places: first is
the IFLA_OPERSTATE, which stores state per RFC2863.
The second is an IFF_LOWER_UP interface flag. As many applications rely
on the latter, reserve 1 bit from if_flags, named as IFF_NETLINK_1.
This flag is mapped to IFF_LOWER_UP in the netlink headers. This is done
to avoid making applications think this flag is actually
supported / presented in non-netlink outputs.
* Add flag change notifications, by hooking into rt_ifmsg().
In the netlink model, notification should include the bitmask for the
change flags. Update rt_ifmsg() to include such bitmask.

Differential Revision: https://reviews.freebsd.org/D37597

show more ...

netlink: add netlink support

Netlinks is a communication protocol currently used in Linux kernel to modify,
read and subscribe for nearly all networking state. Interfaces, addresses, routes,
firew

netlink: add netlink support

Netlinks is a communication protocol currently used in Linux kernel to modify,
read and subscribe for nearly all networking state. Interfaces, addresses, routes,
firewall, fibs, vnets, etc are controlled via netlink.
It is async, TLV-based protocol, providing 1-1 and 1-many communications.

The current implementation supports the subset of NETLINK_ROUTE
family. To be more specific, the following is supported:
* Dumps:
- routes
- nexthops / nexthop groups
- interfaces
- interface addresses
- neighbors (arp/ndp)
* Notifications:
- interface arrival/departure
- interface address arrival/departure
- route addition/deletion
* Modifications:
- adding/deleting routes
- adding/deleting nexthops/nexthops groups
- adding/deleting neghbors
- adding/deleting interfaces (basic support only)
* Rtsock interaction
- route events are bridged both ways

The implementation also supports the NETLINK_GENERIC family framework.

Implementation notes:
Netlink is implemented via loadable/unloadable kernel module,
not touching many kernel parts.
Each netlink socket uses dedicated taskqueue to support async operations
that can sleep, such as interface creation. All message processing is
performed within these taskqueues.

Compatibility:
Most of the Netlink data models specified above maps to FreeBSD concepts
nicely. Unmodified ip(8) binary correctly works with
interfaces, addresses, routes, nexthops and nexthop groups. Some
software such as net/bird require header-only modifications to compile
and work with FreeBSD netlink.

Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D36002
MFC after: 2 months

show more ...

netlink: dump interface capabilities with other interface data.

This change exports interface capabilities using the standard
Netlink attribute type, bitset, and switches `ifconfig(8)` to use
it whe

netlink: dump interface capabilities with other interface data.

This change exports interface capabilities using the standard
Netlink attribute type, bitset, and switches `ifconfig(8)` to use
it when displaying interface data.
Bitset comes in two representations. The first one is "compact",
where the bits are exported via two arrays - "mask" listing the
"valid" bits and "values, providing the values for those bits.
The second one is more verbose, listing each bit as a separate item,
with its name, id and value. The latter option is handy when submitting
update requests.

The support for setting capabilities will be added in the upcoming diffs.

Differential Revision: https://reviews.freebsd.org/D40331

show more ...

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.

Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix

show more ...

netlink: provide original interface lladdr in the interface dump.

* Store lladdr in the FreeBSD-specific IFLAF_ORIG_HWADDR attr
* Do not export empty IFLA_ADDRESS for interfaces w/o lladdrs.

MFC af

netlink: provide original interface lladdr in the interface dump.

* Store lladdr in the FreeBSD-specific IFLAF_ORIG_HWADDR attr
* Do not export empty IFLA_ADDRESS for interfaces w/o lladdrs.

MFC after: 2 weeks

show more ...

netlink: sync interface IFLA attributes

MFC after: 2 weeks

netlink: improve interface handling

* Separate interface creation from interface modification code
* Support setting some interface attributes (ifdescr, mtu, up/down, promisc)
* Improve interaction

netlink: improve interface handling

* Separate interface creation from interface modification code
* Support setting some interface attributes (ifdescr, mtu, up/down, promisc)
* Improve interaction with the cloners requiring to parse/write custom
interface attributes
* Add bitmask-based way of checking if the attribute is present in the
message
* Don't use multipart RTM_GETLINK replies when searching for the
specific interface names
* Use ENODEV instead of ENOENT in case of failed RTM_GETLINK search
* Add python netlink test helpers
* Add some netlink interface tests

Differential Revision: https://reviews.freebsd.org/D37668

show more ...

netlink: add interface notification on link status / flags change.

* Add link-state change notifications by subscribing to ifnet_link_event.
In the Linux netlink model, link state is reported in 2

netlink: add interface notification on link status / flags change.

* Add link-state change notifications by subscribing to ifnet_link_event.
In the Linux netlink model, link state is reported in 2 places: first is
the IFLA_OPERSTATE, which stores state per RFC2863.
The second is an IFF_LOWER_UP interface flag. As many applications rely
on the latter, reserve 1 bit from if_flags, named as IFF_NETLINK_1.
This flag is mapped to IFF_LOWER_UP in the netlink headers. This is done
to avoid making applications think this flag is actually
supported / presented in non-netlink outputs.
* Add flag change notifications, by hooking into rt_ifmsg().
In the netlink model, notification should include the bitmask for the
change flags. Update rt_ifmsg() to include such bitmask.

Differential Revision: https://reviews.freebsd.org/D37597

show more ...

netlink: add netlink support

Netlinks is a communication protocol currently used in Linux kernel to modify,
read and subscribe for nearly all networking state. Interfaces, addresses, routes,
firew

netlink: add netlink support

Netlinks is a communication protocol currently used in Linux kernel to modify,
read and subscribe for nearly all networking state. Interfaces, addresses, routes,
firewall, fibs, vnets, etc are controlled via netlink.
It is async, TLV-based protocol, providing 1-1 and 1-many communications.

The current implementation supports the subset of NETLINK_ROUTE
family. To be more specific, the following is supported:
* Dumps:
- routes
- nexthops / nexthop groups
- interfaces
- interface addresses
- neighbors (arp/ndp)
* Notifications:
- interface arrival/departure
- interface address arrival/departure
- route addition/deletion
* Modifications:
- adding/deleting routes
- adding/deleting nexthops/nexthops groups
- adding/deleting neghbors
- adding/deleting interfaces (basic support only)
* Rtsock interaction
- route events are bridged both ways

The implementation also supports the NETLINK_GENERIC family framework.

Implementation notes:
Netlink is implemented via loadable/unloadable kernel module,
not touching many kernel parts.
Each netlink socket uses dedicated taskqueue to support async operations
that can sleep, such as interface creation. All message processing is
performed within these taskqueues.

Compatibility:
Most of the Netlink data models specified above maps to FreeBSD concepts
nicely. Unmodified ip(8) binary correctly works with
interfaces, addresses, routes, nexthops and nexthop groups. Some
software such as net/bird require header-only modifications to compile
and work with FreeBSD netlink.

Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D36002
MFC after: 2 months

show more ...

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.

Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix

show more ...

netlink: provide original interface lladdr in the interface dump.

* Store lladdr in the FreeBSD-specific IFLAF_ORIG_HWADDR attr
* Do not export empty IFLA_ADDRESS for interfaces w/o lladdrs.

MFC af

netlink: provide original interface lladdr in the interface dump.

* Store lladdr in the FreeBSD-specific IFLAF_ORIG_HWADDR attr
* Do not export empty IFLA_ADDRESS for interfaces w/o lladdrs.

MFC after: 2 weeks

show more ...

netlink: sync interface IFLA attributes

MFC after: 2 weeks

netlink: improve interface handling

* Separate interface creation from interface modification code
* Support setting some interface attributes (ifdescr, mtu, up/down, promisc)
* Improve interaction

netlink: improve interface handling

* Separate interface creation from interface modification code
* Support setting some interface attributes (ifdescr, mtu, up/down, promisc)
* Improve interaction with the cloners requiring to parse/write custom
interface attributes
* Add bitmask-based way of checking if the attribute is present in the
message
* Don't use multipart RTM_GETLINK replies when searching for the
specific interface names
* Use ENODEV instead of ENOENT in case of failed RTM_GETLINK search
* Add python netlink test helpers
* Add some netlink interface tests

Differential Revision: https://reviews.freebsd.org/D37668

show more ...