sys: Remove $FreeBSD$: two-line .h pattern

Remove /^\s*\*\n \*\s+\$FreeBSD\$$\n/

powerpc powermac: Remove unused devclass arguments to DRIVER_MODULE.

powerpc: Add opaque 'private data' to interrupt vectors

The XICS and XIVE need extra data beyond irq and vector. Rather than
performing a separate search, it's better for the general interrupt faci

powerpc: Add opaque 'private data' to interrupt vectors

The XICS and XIVE need extra data beyond irq and vector. Rather than
performing a separate search, it's better for the general interrupt facility
to hold a private pointer, since the search already must be done anyway at
that level.

show more ...

sys/powerpc: further adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - e

sys/powerpc: further adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

show more ...

Remove bogus __unused attribute from hrowpic_eoi().

Fix the interrupt code, broken 7 months ago. The interrupt framework
already supported nested PICs, but was limited to having a nested
AT-PIC only. With G5 support the need for nested OpenPIC control

Fix the interrupt code, broken 7 months ago. The interrupt framework
already supported nested PICs, but was limited to having a nested
AT-PIC only. With G5 support the need for nested OpenPIC controllers
needed to be added. This was done the wrong way and broke the MPC8555
eval system in the process.

OFW, as well as FDT, describe the interrupt routing in terms of a
controller and an interrupt pin on it. This needs to be mapped to a
flat and global resource: the IRQ. The IRQ is the same as the PCI
intline and as such needs to be representable in 8 bits. Secondly,
ISA support pretty much dictates that IRQ 0-15 should be reserved
for ISA interrupts, because of the internal workins of south bridges.
Both were broken.

This change reverts revision 209298 for a big part and re-implements
it simpler. In particular:
o The id() method of the PIC I/F is removed again. It's not needed.
o The openpic_attach() function has been changed to take the OFW
or FDT phandle of the controller as a second argument. All bus
attachments that previously used openpic_attach() as the attach
method of the device I/F now implement as bus-specific method
and pass the phandle_t to the renamed openpic_attach().
o Change powerpc_register_pic() to take a few more arguments. In
particular:
- Pass the number of IPIs specificly. The number of IRQs carved
out for a PIC is the sum of the number of int. pins and IPIs.
- Pass a flag indicating whether the PIC is an AT-PIC or not.
This tells the interrupt framework whether to assign IRQ 0-15
or some other range.
o Until we implement proper multi-pass bus enumeration, we have to
handle the case where we need to map from PIC+pin to IRQ *before*
the PIC gets registered. This is done in a similar way as before,
but rather than carving out 256 IRQs per PIC, we carve out 128
IRQs (124 pins + 4 IPIs). This is supposed to handle the G5 case,
but should really be fixed properly using multiple passes.
o Have the interrupt framework set root_pic in most cases and not
put that burden in PIC drivers (for the most part).
o Remove powerpc_ign_lookup() and replace it with powerpc_get_irq().
Remove IGN_SHIFT, INTR_INTLINE and INTR_IGN.

Related to the above, fix the Freescale PCI controller driver, broken
by the FDT code. Besides not attaching properly, bus numbers were
assigned improperly and enumeration was broken in general. This
prevented the AT PIC from being discovered and interrupt routing to
work properly. Consequently, the ata(4) controller stopped functioning.

Fix the driver, and FDT PCI support, enough to get the MPC8555CDS
going again. The FDT PCI code needs a whole lot more work.

No breakages are expected, but lackiong G5 hardware, it's possible
that there are unpleasant side-effects. At least MPC85xx support is
back to where it was 7 months ago -- it's amazing how badly support
can be broken in just 7 months...

Sponsored by: Juniper Networks

show more ...

MFC r198444:

Allow Heathrow-based machines to boot a kernel containing option SMP
without panicing.

Move the EOI logic when starting ithreads into intr_machdep instead of
relying on it as a side effect of PIC_MASK() in the PIC drivers, and add
an inmplementation of assign_cpu() for the kernel inter

Move the EOI logic when starting ithreads into intr_machdep instead of
relying on it as a side effect of PIC_MASK() in the PIC drivers, and add
an inmplementation of assign_cpu() for the kernel interrupt layer.

show more ...

Remove the unneeded header <machine/intr.h>.

Provide for multiple, cascaded PICs on PowerPC systems, and extend the
OFW interrupt map interface to also return the device's interrupt parent.

MFC after: 8.1-RELEASE

Allow Heathrow-based machines to boot a kernel containing option SMP
without panicing.

Convert PowerPC AIM PCI and nexus busses to standard OFW bus interface. This
simplifies certain device attachments (Kauai ATA, for instance), and makes
possible others on new hardware.

On G5 systems

Convert PowerPC AIM PCI and nexus busses to standard OFW bus interface. This
simplifies certain device attachments (Kauai ATA, for instance), and makes
possible others on new hardware.

On G5 systems, there are several otherwise standard PCI devices
(Serverworks SATA) that will not allow their interrupt properties to be
written, so this information must be supplied directly from Open Firmware.

Obtained from: sparc64

show more ...

Add PIC support for IPIs. When registering an interrupt handler,
the PIC also informs the platform at which IRQ level it can start
assigning IPIs, since this can depend on the number of IRQs
supporte

Add PIC support for IPIs. When registering an interrupt handler,
the PIC also informs the platform at which IRQ level it can start
assigning IPIs, since this can depend on the number of IRQs
supported for external interrupts.

show more ...

Revamp the interrupt handling in support of INTR_FILTER. This includes:
o Revamp the PIC I/F to only abstract the PIC hardware. The
resource handling has been moved to nexus, where it belongs.
o

Revamp the interrupt handling in support of INTR_FILTER. This includes:
o Revamp the PIC I/F to only abstract the PIC hardware. The
resource handling has been moved to nexus, where it belongs.
o Include EOI and MASK+EOI methods to the PIC I/F in support of
INTR_FILTER.
o With the allocation of interrupt resources and setup of
interrupt handlers in the common platform code we can delay
talking to the PIC hardware after enumeration of all devices.
Introduce a call to powerpc_intr_enable() in configure_final()
to achieve that and have powerpc_setup_intr() only program the
PIC when !cold.
o As a consequence of the above, remove all early_attach() glue
from the OpenPIC and Heathrow PIC drivers and have them
register themselves when they're found during enumeration.
o Decouple the interrupt vector from the interrupt request line.
Allocate vectors increasingly so that they can be used for
the intrcnt index as well. Extend the Heathrow PIC driver to
translate between IRQ and vector. The OpenPIC driver already
has the support for vectors in hardware.

Approved by: re (blanket)

show more ...

o break newbus api: add a new argument of type driver_filter_t to
bus_setup_intr()

o add an int return code to all fast handlers

o retire INTR_FAST/IH_FAST

For more info: http://docs.freebsd.org

o break newbus api: add a new argument of type driver_filter_t to
bus_setup_intr()

o add an int return code to all fast handlers

o retire INTR_FAST/IH_FAST

For more info: http://docs.freebsd.org/cgi/getmsg.cgi?fetch=465712+0+current/freebsd-current

Reviewed by: many
Approved by: re@

show more ...

Set the rid for any resource obtained from rman_resource_reserve.

/* -> /*- for license, minor formatting changes

Instead of "OpenFirmware", "openfirmware", etc. use the official spelling
"Open Firmware" from IEEE 1275 and OpenFirmware.org (no pun intended).

Ok'ed by: tmm

- Introduce an ofw_bus kobj-interface for retrieving the OFW node and a
subset ("compatible", "device_type", "model" and "name") of the standard
properties in drivers for devices on Open Firmware

- Introduce an ofw_bus kobj-interface for retrieving the OFW node and a
subset ("compatible", "device_type", "model" and "name") of the standard
properties in drivers for devices on Open Firmware supported busses. The
standard properties "reg", "interrupts" und "address" are not covered by
this interface because they are only of interest in the respective bridge
code. There's a remaining standard property "status" which is unclear how
to support properly but which also isn't used in FreeBSD at present.
This ofw_bus kobj-interface allows to replace the various (ebus_get_node(),
ofw_pci_get_node(), etc.) and partially inconsistent (central_get_type()
vs. sbus_get_device_type(), etc.) existing IVAR ones with a common one.
This in turn allows to simplify and remove code-duplication in drivers for
devices that can hang off of more than one OFW supported bus.
- Convert the sparc64 Central, EBus, FHC, PCI and SBus bus drivers and the
drivers for their children to use the ofw_bus kobj-interface. The IVAR-
interfaces of the Central, EBus and FHC are entirely replaced by this. The
PCI bus driver used its own kobj-interface and now also uses the ofw_bus
one. The IVARs special to the SBus, e.g. for retrieving the burst size,
remain.
Beware: this causes an ABI-breakage for modules of drivers which used the
IVAR-interfaces, i.e. esp(4), hme(4), isp(4) and uart(4), which need to be
recompiled.
The style-inconsistencies introduced in some of the bus drivers will be
fixed by tmm@ in a generic clean-up of the respective drivers later (he
requested to add the changes in the "new" style).
- Convert the powerpc MacIO bus driver and the drivers for its children to
use the ofw_bus kobj-interface. This invloves removing the IVARs related
to the "reg" property which were unused and a leftover from the NetBSD
origini of the code. There's no ABI-breakage caused by this because none
of these driver are currently built as modules.
There are other powerpc bus drivers which can be converted to the ofw_bus
kobj-interface, e.g. the PCI bus driver, which should be done together
with converting powerpc to use the OFW PCI code from sparc64.
- Make the SBus and FHC front-end of zs(4) and the sparc64 eeprom(4) take
advantage of the ofw_bus kobj-interface and simplify them a bit.

Reviewed by: grehan, tmm
Approved by: re (scottl)
Discussed with: tmm
Tested with: Sun AX1105, AXe, Ultra 2, Ultra 60; PPC cross-build on i386

show more ...

- Use the rman_get_* functions instead of reaching into struct resource.
- Remove __RMAN_RESORUCE_VISIBLE again. It's no longer required either
because of the above change or because struct rman is

- Use the rman_get_* functions instead of reaching into struct resource.
- Remove __RMAN_RESORUCE_VISIBLE again. It's no longer required either
because of the above change or because struct rman is no longer hidden.

Reviewed by: grehan
Tested by: cross-compile on i386

show more ...

Catch up with __RMAN_RESOURCE_VISIBLE change

Catchup to now-required <sys/module.h> for PowerPC

Convert callers to the new bus_alloc_resource_any(9) API.

Submitted by: Mark Santcroos <marks@ripe.net>
Reviewed by: imp, dfr, bde

Use a device identify entry point to attach to nexus, since the
nexus code no longer searches for interrupt controllers.

Widen the enable/disable helper function's argument in line with the
ithread_create() changes etc. This should be mostly a NOP.