History log of /linux/arch/arm/mach-rpc/dma.c (Results 1 – 23 of 23)
Revision (<<< Hide revision tags) (Show revision tags >>>) Date Author Comments
Revision tags: v5.18-rc5, v5.18-rc4, v5.18-rc3, v5.18-rc2, v5.18-rc1, v5.17, v5.17-rc8, v5.17-rc7, v5.17-rc6, v5.17-rc5, v5.17-rc4, v5.17-rc3, v5.17-rc2, v5.17-rc1, v5.16, v5.16-rc8, v5.16-rc7, v5.16-rc6, v5.16-rc5, v5.16-rc4, v5.16-rc3, v5.16-rc2, v5.16-rc1, v5.15, v5.15-rc7, v5.15-rc6, v5.15-rc5, v5.15-rc4, v5.15-rc3, v5.15-rc2, v5.15-rc1, v5.14, v5.14-rc7, v5.14-rc6, v5.14-rc5, v5.14-rc4, v5.14-rc3, v5.14-rc2, v5.14-rc1, v5.13, v5.13-rc7, v5.13-rc6, v5.13-rc5, v5.13-rc4, v5.13-rc3, v5.13-rc2, v5.13-rc1, v5.12, v5.12-rc8, v5.12-rc7, v5.12-rc6, v5.12-rc5, v5.12-rc4, v5.12-rc3, v5.12-rc2, v5.12-rc1-dontuse, v5.11, v5.11-rc7, v5.11-rc6, v5.11-rc5, v5.11-rc4, v5.11-rc3, v5.11-rc2, v5.11-rc1, v5.10, v5.10-rc7, v5.10-rc6, v5.10-rc5, v5.10-rc4, v5.10-rc3, v5.10-rc2, v5.10-rc1, v5.9, v5.9-rc8, v5.9-rc7, v5.9-rc6, v5.9-rc5, v5.9-rc4, v5.9-rc3, v5.9-rc2, v5.9-rc1, v5.8, v5.8-rc7, v5.8-rc6, v5.8-rc5, v5.8-rc4, v5.8-rc3, v5.8-rc2, v5.8-rc1, v5.7, v5.7-rc7, v5.7-rc6, v5.7-rc5, v5.7-rc4, v5.7-rc3, v5.7-rc2, v5.7-rc1, v5.6, v5.6-rc7, v5.6-rc6, v5.6-rc5, v5.6-rc4, v5.6-rc3, v5.6-rc2, v5.6-rc1, v5.5, v5.5-rc7, v5.5-rc6, v5.5-rc5, v5.5-rc4, v5.5-rc3, v5.5-rc2, v5.5-rc1, v5.4, v5.4-rc8, v5.4-rc7, v5.4-rc6, v5.4-rc5, v5.4-rc4, v5.4-rc3, v5.4-rc2, v5.4-rc1, v5.3, v5.3-rc8, v5.3-rc7, v5.3-rc6, v5.3-rc5, v5.3-rc4, v5.3-rc3, v5.3-rc2, v5.3-rc1, v5.2, v5.2-rc7, v5.2-rc6, v5.2-rc5, v5.2-rc4
# d2912cb1 04-Jun-2019 Thomas Gleixner <tglx@linutronix.de>

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500

Based on 2 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of th

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500

Based on 2 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation #

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-only

has been chosen to replace the boilerplate/reference in 4122 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...


Revision tags: v5.2-rc3, v5.2-rc2, v5.2-rc1, v5.1
# 090a37ce 02-May-2019 Russell King <rmk+kernel@armlinux.org.uk>

ARM: riscpc: dma: use __iomem pointers for writing DMA

Use __iomem pointers for efficiency to write the DMA registers.
This avoids the compiler emitting several instructions for each access
to calcu

ARM: riscpc: dma: use __iomem pointers for writing DMA

Use __iomem pointers for efficiency to write the DMA registers.
This avoids the compiler emitting several instructions for each access
to calculate the register address.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

show more ...


# e659587c 02-May-2019 Russell King <rmk+kernel@armlinux.org.uk>

ARM: riscpc: dma: improve address/length writing

Rearrange writing the DMA addresses to generate more efficient code.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>


# 39694ed0 02-May-2019 Russell King <rmk+kernel@armlinux.org.uk>

ARM: riscpc: dma: make state a local variable

Make state a local variable to avoid rewriting it in the DMA loop.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>


# 8194468f 02-May-2019 Russell King <rmk+kernel@armlinux.org.uk>

ARM: riscpc: dma: eliminate "cur_sg" scatterlist usage

All we really need is the DMA address and size, we don't need the
baggage of a full scatterlist structure.

Signed-off-by: Russell King <rmk+ke

ARM: riscpc: dma: eliminate "cur_sg" scatterlist usage

All we really need is the DMA address and size, we don't need the
baggage of a full scatterlist structure.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

show more ...


# ffd9a1ba 02-May-2019 Russell King <rmk+kernel@armlinux.org.uk>

ARM: riscpc: fix DMA

DMA got broken a while back in two different ways:
1) a change in the behaviour of disable_irq() to wait for the interrupt
to finish executing causes us to deadlock at the en

ARM: riscpc: fix DMA

DMA got broken a while back in two different ways:
1) a change in the behaviour of disable_irq() to wait for the interrupt
to finish executing causes us to deadlock at the end of DMA.
2) a change to avoid modifying the scatterlist left the first transfer
uninitialised.

DMA is only used with expansion cards, so has gone unnoticed.

Fixes: fa4e99899932 ("[ARM] dma: RiscPC: don't modify DMA SG entries")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

show more ...


Revision tags: v5.1-rc7, v5.1-rc6, v5.1-rc5, v5.1-rc4, v5.1-rc3, v5.1-rc2, v5.1-rc1, v5.0, v5.0-rc8, v5.0-rc7, v5.0-rc6, v5.0-rc5, v5.0-rc4, v5.0-rc3, v5.0-rc2, v5.0-rc1, v4.20
# 5ab6a91a 21-Dec-2018 Christoph Hellwig <hch@lst.de>

arm: use a dummy struct device for ISA DMA use of the DMA API

This gets rid of the last NULL dev argument passed to the DMA API.

Signed-off-by: Christoph Hellwig <hch@lst.de>


Revision tags: v4.20-rc7, v4.20-rc6, v4.20-rc5, v4.20-rc4, v4.20-rc3, v4.20-rc2, v4.20-rc1, v4.19, v4.19-rc8, v4.19-rc7, v4.19-rc6, v4.19-rc5, v4.19-rc4, v4.19-rc3, v4.19-rc2, v4.19-rc1, v4.18, v4.18-rc8, v4.18-rc7, v4.18-rc6, v4.18-rc5, v4.18-rc4, v4.18-rc3, v4.18-rc2, v4.18-rc1, v4.17, v4.17-rc7, v4.17-rc6, v4.17-rc5, v4.17-rc4, v4.17-rc3, v4.17-rc2, v4.17-rc1, v4.16, v4.16-rc7, v4.16-rc6, v4.16-rc5, v4.16-rc4, v4.16-rc3, v4.16-rc2, v4.16-rc1, v4.15, v4.15-rc9, v4.15-rc8, v4.15-rc7, v4.15-rc6, v4.15-rc5, v4.15-rc4, v4.15-rc3, v4.15-rc2, v4.15-rc1, v4.14, v4.14-rc8, v4.14-rc7, v4.14-rc6, v4.14-rc5, v4.14-rc4, v4.14-rc3, v4.14-rc2, v4.14-rc1, v4.13, v4.13-rc7, v4.13-rc6, v4.13-rc5, v4.13-rc4, v4.13-rc3, v4.13-rc2, v4.13-rc1, v4.12, v4.12-rc7, v4.12-rc6, v4.12-rc5, v4.12-rc4, v4.12-rc3, v4.12-rc2, v4.12-rc1, v4.11, v4.11-rc8, v4.11-rc7, v4.11-rc6, v4.11-rc5, v4.11-rc4, v4.11-rc3, v4.11-rc2, v4.11-rc1, v4.10, v4.10-rc8, v4.10-rc7, v4.10-rc6, v4.10-rc5, v4.10-rc4, v4.10-rc3, v4.10-rc2, v4.10-rc1
# 7c0f6ba6 24-Dec-2016 Linus Torvalds <torvalds@linux-foundation.org>

Replace <asm/uaccess.h> with <linux/uaccess.h> globally

This was entirely automated, using the script by Al:

PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>'
sed -i -e "s!$PA

Replace <asm/uaccess.h> with <linux/uaccess.h> globally

This was entirely automated, using the script by Al:

PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>'
sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \
$(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h)

to do the replacement at the end of the merge window.

Requested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...


Revision tags: v4.9, v4.9-rc8, v4.9-rc7, v4.9-rc6, v4.9-rc5, v4.9-rc4, v4.9-rc3, v4.9-rc2, v4.9-rc1, v4.8, v4.8-rc8, v4.8-rc7, v4.8-rc6, v4.8-rc5, v4.8-rc4, v4.8-rc3, v4.8-rc2, v4.8-rc1, v4.7, v4.7-rc7, v4.7-rc6, v4.7-rc5, v4.7-rc4, v4.7-rc3, v4.7-rc2, v4.7-rc1, v4.6, v4.6-rc7, v4.6-rc6, v4.6-rc5, v4.6-rc4, v4.6-rc3, v4.6-rc2, v4.6-rc1, v4.5, v4.5-rc7, v4.5-rc6, v4.5-rc5, v4.5-rc4, v4.5-rc3, v4.5-rc2, v4.5-rc1, v4.4, v4.4-rc8, v4.4-rc7, v4.4-rc6, v4.4-rc5, v4.4-rc4, v4.4-rc3, v4.4-rc2, v4.4-rc1, v4.3, v4.3-rc7, v4.3-rc6, v4.3-rc5, v4.3-rc4, v4.3-rc3, v4.3-rc2, v4.3-rc1, v4.2, v4.2-rc8, v4.2-rc7, v4.2-rc6, v4.2-rc5, v4.2-rc4, v4.2-rc3, v4.2-rc2, v4.2-rc1, v4.1, v4.1-rc8, v4.1-rc7, v4.1-rc6, v4.1-rc5, v4.1-rc4, v4.1-rc3, v4.1-rc2, v4.1-rc1, v4.0, v4.0-rc7, v4.0-rc6, v4.0-rc5, v4.0-rc4, v4.0-rc3, v4.0-rc2, v4.0-rc1, v3.19, v3.19-rc7, v3.19-rc6, v3.19-rc5, v3.19-rc4, v3.19-rc3, v3.19-rc2, v3.19-rc1, v3.18, v3.18-rc7, v3.18-rc6, v3.18-rc5, v3.18-rc4, v3.18-rc3, v3.18-rc2, v3.18-rc1, v3.17, v3.17-rc7, v3.17-rc6, v3.17-rc5, v3.17-rc4, v3.17-rc3, v3.17-rc2, v3.17-rc1, v3.16, v3.16-rc7, v3.16-rc6, v3.16-rc5, v3.16-rc4, v3.16-rc3, v3.16-rc2, v3.16-rc1, v3.15, v3.15-rc8, v3.15-rc7, v3.15-rc6, v3.15-rc5, v3.15-rc4, v3.15-rc3, v3.15-rc2, v3.15-rc1, v3.14, v3.14-rc8, v3.14-rc7, v3.14-rc6
# 78f6db99 04-Mar-2014 Michael Opdenacker <michael@free-electrons.com>

ARM: 8000/1: misc: remove deprecated IRQF_DISABLED

This patch removes the use of the IRQF_DISABLED flag
from miscellaneous code in mach-xxx and plat-xxx

This flag is a NOOP since 2.6.35 and it will

ARM: 8000/1: misc: remove deprecated IRQF_DISABLED

This patch removes the use of the IRQF_DISABLED flag
from miscellaneous code in mach-xxx and plat-xxx

This flag is a NOOP since 2.6.35 and it will be removed one day.

Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

show more ...


Revision tags: v3.14-rc5, v3.14-rc4, v3.14-rc3, v3.14-rc2, v3.14-rc1, v3.13, v3.13-rc8, v3.13-rc7, v3.13-rc6, v3.13-rc5, v3.13-rc4, v3.13-rc3, v3.13-rc2, v3.13-rc1, v3.12, v3.12-rc7, v3.12-rc6, v3.12-rc5, v3.12-rc4, v3.12-rc3, v3.12-rc2, v3.12-rc1, v3.11, v3.11-rc7, v3.11-rc6, v3.11-rc5, v3.11-rc4, v3.11-rc3, v3.11-rc2, v3.11-rc1, v3.10, v3.10-rc7, v3.10-rc6, v3.10-rc5, v3.10-rc4, v3.10-rc3, v3.10-rc2, v3.10-rc1, v3.9, v3.9-rc8, v3.9-rc7, v3.9-rc6, v3.9-rc5, v3.9-rc4, v3.9-rc3, v3.9-rc2, v3.9-rc1, v3.8, v3.8-rc7, v3.8-rc6, v3.8-rc5, v3.8-rc4, v3.8-rc3, v3.8-rc2, v3.8-rc1, v3.7, v3.7-rc8, v3.7-rc7, v3.7-rc6, v3.7-rc5, v3.7-rc4, v3.7-rc3, v3.7-rc2, v3.7-rc1, v3.6, v3.6-rc7, v3.6-rc6, v3.6-rc5, v3.6-rc4, v3.6-rc3, v3.6-rc2, v3.6-rc1, v3.5, v3.5-rc7, v3.5-rc6, v3.5-rc5, v3.5-rc4, v3.5-rc3, v3.5-rc2, v3.5-rc1, v3.4, v3.4-rc7, v3.4-rc6, v3.4-rc5, v3.4-rc4, v3.4-rc3, v3.4-rc2, v3.4-rc1, v3.3, v3.3-rc7, v3.3-rc6, v3.3-rc5, v3.3-rc4, v3.3-rc3, v3.3-rc2, v3.3-rc1, v3.2, v3.2-rc7, v3.2-rc6, v3.2-rc5, v3.2-rc4, v3.2-rc3, v3.2-rc2, v3.2-rc1, v3.1, v3.1-rc10, v3.1-rc9, v3.1-rc8, v3.1-rc7, v3.1-rc6, v3.1-rc5, v3.1-rc4, v3.1-rc3, v3.1-rc2, v3.1-rc1, v3.0, v3.0-rc7, v3.0-rc6, v3.0-rc5, v3.0-rc4, v3.0-rc3, v3.0-rc2, v3.0-rc1, v2.6.39, v2.6.39-rc7, v2.6.39-rc6, v2.6.39-rc5, v2.6.39-rc4, v2.6.39-rc3, v2.6.39-rc2, v2.6.39-rc1, v2.6.38, v2.6.38-rc8, v2.6.38-rc7, v2.6.38-rc6, v2.6.38-rc5, v2.6.38-rc4, v2.6.38-rc3, v2.6.38-rc2, v2.6.38-rc1, v2.6.37, v2.6.37-rc8, v2.6.37-rc7, v2.6.37-rc6, v2.6.37-rc5, v2.6.37-rc4, v2.6.37-rc3, v2.6.37-rc2, v2.6.37-rc1, v2.6.36, v2.6.36-rc8, v2.6.36-rc7, v2.6.36-rc6, v2.6.36-rc5, v2.6.36-rc4, v2.6.36-rc3, v2.6.36-rc2, v2.6.36-rc1, v2.6.35, v2.6.35-rc6, v2.6.35-rc5, v2.6.35-rc4, v2.6.35-rc3, v2.6.35-rc2, v2.6.35-rc1, v2.6.34, v2.6.34-rc7, v2.6.34-rc6, v2.6.34-rc5, v2.6.34-rc4, v2.6.34-rc3
# 5a0e3ad6 24-Mar-2010 Tejun Heo <tj@kernel.org>

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

percpu.h is included by sched.h and module.h and thus ends up being
included when bu

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.

2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).

* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>

show more ...


Revision tags: v2.6.34-rc2, v2.6.34-rc1, v2.6.33, v2.6.33-rc8, v2.6.33-rc7, v2.6.33-rc6, v2.6.33-rc5, v2.6.33-rc4, v2.6.33-rc3, v2.6.33-rc2, v2.6.33-rc1, v2.6.32, v2.6.32-rc8, v2.6.32-rc7, v2.6.32-rc6, v2.6.32-rc5, v2.6.32-rc4, v2.6.32-rc3, v2.6.32-rc1, v2.6.32-rc2, v2.6.31, v2.6.31-rc9, v2.6.31-rc8, v2.6.31-rc7, v2.6.31-rc6, v2.6.31-rc5, v2.6.31-rc4, v2.6.31-rc3, v2.6.31-rc2, v2.6.31-rc1, v2.6.30, v2.6.30-rc8, v2.6.30-rc7, v2.6.30-rc6, v2.6.30-rc5, v2.6.30-rc4, v2.6.30-rc3, v2.6.30-rc2, v2.6.30-rc1, v2.6.29, v2.6.29-rc8, v2.6.29-rc7, v2.6.29-rc6
# fa4e9989 21-Feb-2009 Russell King <rmk@dyn-67.arm.linux.org.uk>

[ARM] dma: RiscPC: don't modify DMA SG entries

We should not be modifying the scatterlist passed to us from the
driver code; doing so breaks assumptions made by the DMA API code,
and could cause pro

[ARM] dma: RiscPC: don't modify DMA SG entries

We should not be modifying the scatterlist passed to us from the
driver code; doing so breaks assumptions made by the DMA API code,
and could cause problems if the driver retries a transfer using an
old scatterlist.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

show more ...


# 308d333a 21-Feb-2009 Russell King <rmk@dyn-67.arm.linux.org.uk>

[ARM] dma: move IOMD and floppy DMA structures to RiscPC DMA code

There's no point these being in a generic include file when they're
only used in arch/arm/mach-rpc/dma.c.

Signed-off-by: Russell Ki

[ARM] dma: move IOMD and floppy DMA structures to RiscPC DMA code

There's no point these being in a generic include file when they're
only used in arch/arm/mach-rpc/dma.c.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

show more ...


Revision tags: v2.6.29-rc5, v2.6.29-rc4, v2.6.29-rc3, v2.6.29-rc2, v2.6.29-rc1, v2.6.28, v2.6.28-rc9, v2.6.28-rc8
# 9e28d7e8 08-Dec-2008 Russell King <rmk@dyn-67.arm.linux.org.uk>

[ARM] dma: convert IOMD DMA to use sg_next()

... rather than incrementing the sg pointer.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>


# ad9dd94c 08-Dec-2008 Russell King <rmk@dyn-67.arm.linux.org.uk>

[ARM] dma: move RiscPC specific DMA data out of dma_struct

Separate the RiscPC specific (IOMD and floppy FIQ) data out of the core
DMA structure by making the IOMD and floppy DMA supersets.

Signed-

[ARM] dma: move RiscPC specific DMA data out of dma_struct

Separate the RiscPC specific (IOMD and floppy FIQ) data out of the core
DMA structure by making the IOMD and floppy DMA supersets.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

show more ...


# 2f757f2a 08-Dec-2008 Russell King <rmk@dyn-67.arm.linux.org.uk>

[ARM] dma: rejig DMA initialization

Rather than having the central DMA multiplexer call the architecture
specific DMA initialization function, have each architecture DMA
initialization function use

[ARM] dma: rejig DMA initialization

Rather than having the central DMA multiplexer call the architecture
specific DMA initialization function, have each architecture DMA
initialization function use core_initcall(), and register each DMA
channel separately with the multiplexer.

This removes the array of dma structures in the central multiplexer,
replacing it with an array of pointers instead; this is more flexible
since it allows the drivers to wrap the DMA structure (eventually
allowing us to transition non-ISA DMA drivers away.)

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

show more ...


# 1df81302 08-Dec-2008 Russell King <rmk@dyn-67.arm.linux.org.uk>

[ARM] dma: remove dmach_t typedef

Remove a pointless integer typedef.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>


Revision tags: v2.6.28-rc7, v2.6.28-rc6, v2.6.28-rc5, v2.6.28-rc4, v2.6.28-rc3, v2.6.28-rc2, v2.6.28-rc1, v2.6.27, v2.6.27-rc9, v2.6.27-rc8, v2.6.27-rc7, v2.6.27-rc6
# fced80c7 06-Sep-2008 Russell King <rmk@dyn-67.arm.linux.org.uk>

[ARM] Convert asm/io.h to linux/io.h

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>


Revision tags: v2.6.27-rc5, v2.6.27-rc4, v2.6.27-rc3, v2.6.27-rc2
# a09e64fb 05-Aug-2008 Russell King <rmk@dyn-67.arm.linux.org.uk>

[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach

This just leaves include/asm-arm/plat-* to deal with.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>


# be509729 04-Aug-2008 Russell King <rmk@dyn-67.arm.linux.org.uk>

[ARM] Remove asm/hardware.h, use asm/arch/hardware.h instead

Remove includes of asm/hardware.h in addition to asm/arch/hardware.h.
Then, since asm/hardware.h only exists to include asm/arch/hardware

[ARM] Remove asm/hardware.h, use asm/arch/hardware.h instead

Remove includes of asm/hardware.h in addition to asm/arch/hardware.h.
Then, since asm/hardware.h only exists to include asm/arch/hardware.h,
update everything to directly include asm/arch/hardware.h and remove
asm/hardware.h.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

show more ...


Revision tags: v2.6.27-rc1, v2.6.26, v2.6.26-rc9, v2.6.26-rc8, v2.6.26-rc7, v2.6.26-rc6, v2.6.26-rc5, v2.6.26-rc4, v2.6.26-rc3, v2.6.26-rc2, v2.6.26-rc1, v2.6.25, v2.6.25-rc9, v2.6.25-rc8, v2.6.25-rc7, v2.6.25-rc6, v2.6.25-rc5, v2.6.25-rc4, v2.6.25-rc3, v2.6.25-rc2, v2.6.25-rc1, v2.6.24, v2.6.24-rc8, v2.6.24-rc7, v2.6.24-rc6, v2.6.24-rc5, v2.6.24-rc4, v2.6.24-rc3, v2.6.24-rc2, v2.6.24-rc1, v2.6.23, v2.6.23-rc9, v2.6.23-rc8, v2.6.23-rc7, v2.6.23-rc6, v2.6.23-rc5, v2.6.23-rc4, v2.6.23-rc3, v2.6.23-rc2, v2.6.23-rc1, v2.6.22, v2.6.22-rc7, v2.6.22-rc6, v2.6.22-rc5, v2.6.22-rc4, v2.6.22-rc3, v2.6.22-rc2, v2.6.22-rc1, v2.6.21, v2.6.21-rc7, v2.6.21-rc6, v2.6.21-rc5, v2.6.21-rc4, v2.6.21-rc3, v2.6.21-rc2, v2.6.21-rc1, v2.6.20, v2.6.20-rc7, v2.6.20-rc6, v2.6.20-rc5, v2.6.20-rc4, v2.6.20-rc3, v2.6.20-rc2, v2.6.20-rc1, v2.6.19, v2.6.19-rc6, v2.6.19-rc5, v2.6.19-rc4, v2.6.19-rc3, v2.6.19-rc2
# 0cd61b68 06-Oct-2006 Linus Torvalds <torvalds@g5.osdl.org>

Initial blind fixup for arm for irq changes

Untested, but this should fix up the bulk of the totally mechanical
issues, and should make the actual detail fixing easier.

Signed-off-by: Linus Torvald

Initial blind fixup for arm for irq changes

Untested, but this should fix up the bulk of the totally mechanical
issues, and should make the actual detail fixing easier.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>

show more ...


Revision tags: v2.6.19-rc1, v2.6.18, v2.6.18-rc7, v2.6.18-rc6, v2.6.18-rc5, v2.6.18-rc4, v2.6.18-rc3, v2.6.18-rc2, v2.6.18-rc1
# 52e405ea 03-Jul-2006 Thomas Gleixner <tglx@linutronix.de>

[PATCH] ARM: fixup irqflags breakage after ARM genirq merge

The irgflags consolidation did conflict with the ARM to generic IRQ
conversion and was not applied for ARM. Fix it up.

Use the new IRQF_

[PATCH] ARM: fixup irqflags breakage after ARM genirq merge

The irgflags consolidation did conflict with the ARM to generic IRQ
conversion and was not applied for ARM. Fix it up.

Use the new IRQF_ constants and remove the SA_INTERRUPT define

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

show more ...


Revision tags: v2.6.17, v2.6.17-rc6, v2.6.17-rc5, v2.6.17-rc4, v2.6.17-rc3, v2.6.17-rc2, v2.6.17-rc1, v2.6.16, v2.6.16-rc6, v2.6.16-rc5, v2.6.16-rc4, v2.6.16-rc3, v2.6.16-rc2, v2.6.16-rc1
# 7cdad482 04-Jan-2006 Russell King <rmk@dyn-67.arm.linux.org.uk>

[ARM] Remove '__address' from scatterlist and convert to DMA API

The old __address element in struct scatterlist remained from older
kernels because the ARM DMA emulation code made use of it. Move

[ARM] Remove '__address' from scatterlist and convert to DMA API

The old __address element in struct scatterlist remained from older
kernels because the ARM DMA emulation code made use of it. Move
this field into struct dma_struct, and convert DMA emulation code
to setup a SG entry as required.

Also, convert DMA emulation code to use the new DMA API rather
than the PCI DMA API.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

show more ...


Revision tags: v2.6.15, v2.6.15-rc7, v2.6.15-rc6, v2.6.15-rc5, v2.6.15-rc4, v2.6.15-rc3, v2.6.15-rc2, v2.6.15-rc1, v2.6.14, v2.6.14-rc5, v2.6.14-rc4, v2.6.14-rc3, v2.6.14-rc2, v2.6.14-rc1, v2.6.13, v2.6.13-rc7, v2.6.13-rc6, v2.6.13-rc5, v2.6.13-rc4, v2.6.13-rc3, v2.6.13-rc2, v2.6.13-rc1, v2.6.12, v2.6.12-rc6, v2.6.12-rc5, v2.6.12-rc4, v2.6.12-rc3, v2.6.12-rc2
# 1da177e4 16-Apr-2005 Linus Torvalds <torvalds@ppc970.osdl.org>

Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in

Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

show more ...