arm64: dts: qcom: sm8350-hdk: add USB-C orientation GPIO

Define the USB-C orientation GPIO so that the USB-C port orientation is
known without having to resort to the altmode notifications.

Signed-

arm64: dts: qcom: sm8350-hdk: add USB-C orientation GPIO

Define the USB-C orientation GPIO so that the USB-C port orientation is
known without having to resort to the altmode notifications.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240409-hdk-orientation-gpios-v2-2-658efd993987@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

show more ...

arm64: dts: qcom: sm8350-hdk: add pmr735a regulators

The SM8350 HDK uses pmr735a to supply some of the voltages (e.g. to
WiFi/BT chip). Declare corresponding regulators together with voltage
boundar

arm64: dts: qcom: sm8350-hdk: add pmr735a regulators

The SM8350 HDK uses pmr735a to supply some of the voltages (e.g. to
WiFi/BT chip). Declare corresponding regulators together with voltage
boundaries.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230825214550.1650938-3-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

show more ...

arm64: dts: qcom: sm8350-hdk: add missing PMICs

Include configuration for several PMICs presend on the board.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybci

arm64: dts: qcom: sm8350-hdk: add missing PMICs

Include configuration for several PMICs presend on the board.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230825214550.1650938-2-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

show more ...

arm64: dts: qcom: sm8350-hdk: add UFS host controller supply

According to schematics the L9B regulator supplies VCCQ (already in DTS)
and the UFS controller pads (VDD_PX10, missing vdd-hba). Add th

arm64: dts: qcom: sm8350-hdk: add UFS host controller supply

According to schematics the L9B regulator supplies VCCQ (already in DTS)
and the UFS controller pads (VDD_PX10, missing vdd-hba). Add the
missing supply for full hardware description, even though it should not
have functional impact.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230906104744.163479-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

show more ...

arm64: dts: qcom: sm8350-hdk: add uSD card

Add uSD card to HDK8350.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: h

arm64: dts: qcom: sm8350-hdk: add uSD card

Add uSD card to HDK8350.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230719192809.434709-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

show more ...

arm64: dts: qcom: sm8350-hdk: include PMK8350

HDK8350 comes with PMK8350 PMIC, so include relevant DTSI. This also
allows to use reboot reason.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org

arm64: dts: qcom: sm8350-hdk: include PMK8350

HDK8350 comes with PMK8350 PMIC, so include relevant DTSI. This also
allows to use reboot reason.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230719192809.434709-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

show more ...

arm64: dts: qcom: sm8[1234]50-hdk: add chassis-type property

Qualcomm's Hardware Development Kits devices are embedded platforms,
set the chassis-type property to 'embedded'.

Signed-off-by: Neil Ar

arm64: dts: qcom: sm8[1234]50-hdk: add chassis-type property

Qualcomm's Hardware Development Kits devices are embedded platforms,
set the chassis-type property to 'embedded'.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230622-topic-sm8x50-upstream-chassis-type-v1-3-13f676eb71f3@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

show more ...

arm64: dts: qcom: sm8350-hdk: correct FSA4480 port

FSA4480 has only one port according to bindings:

sm8350-hdk.dtb: typec-mux@42: 'port' is a required property

Signed-off-by: Krzysztof Kozlowski

arm64: dts: qcom: sm8350-hdk: correct FSA4480 port

FSA4480 has only one port according to bindings:

sm8350-hdk.dtb: typec-mux@42: 'port' is a required property

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230618114442.140185-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

show more ...

arm64: dts: qcom: Drop undocumented "svid" property

The Linux typec_mux implementation required that a property named "svid"
was present in the remote node of the of_graph for a match to be found.

arm64: dts: qcom: Drop undocumented "svid" property

The Linux typec_mux implementation required that a property named "svid"
was present in the remote node of the of_graph for a match to be found.

With the introduction of commit '4aebc4f89f00 ("usb: typec: mux: Clean up
mux_fwnode_match()")', the implementation is aligned with the binding
and this property can be dropped - and the associated DeviceTree
validation warning resolved.

Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230531024944.4105769-1-quic_bjorande@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

show more ...

arm64: dts: qcom: sm8350-hdk: remove useless enablement of mdss_mdp

The MDP/DPU device is not disabled by default, so there is not point in
enabling it in the board DTS file.

Signed-off-by: Dmitry

arm64: dts: qcom: sm8350-hdk: remove useless enablement of mdss_mdp

The MDP/DPU device is not disabled by default, so there is not point in
enabling it in the board DTS file.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230531011623.3808538-3-dmitry.baryshkov@linaro.org

show more ...

arm64: dts: qcom: sm8350-hdk: Add QMP & DP to SuperSpeed graph

With support for the QMP combo phy to react to USB Type-C switch events,
introduce it as the next hop for the SuperSpeed lanes of the T

arm64: dts: qcom: sm8350-hdk: Add QMP & DP to SuperSpeed graph

With support for the QMP combo phy to react to USB Type-C switch events,
introduce it as the next hop for the SuperSpeed lanes of the Type-C
connector, and connect the output of the DisplayPort controller
to the QMP combo phy.

This allows the TCPM to perform orientation switching of both USB and
DisplayPort signals.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230503-topic-sm8450-graphics-dp-next-v3-3-6c43d293995f@linaro.org

show more ...

arm64: dts: qcom: drop redundant line breaks

Remove trailing, redundant line breaks.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@li

arm64: dts: qcom: drop redundant line breaks

Remove trailing, redundant line breaks.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230306081430.28491-2-krzysztof.kozlowski@linaro.org

show more ...

arm64: dts: qcom: sm8350-hdk: add pmic glink node

Add the pmic glink node linked with the DWC3 USB controller
switched to OTG mode and tagged with usb-role-switch.

Signed-off-by: Neil Armstrong <ne

arm64: dts: qcom: sm8350-hdk: add pmic glink node

Add the pmic glink node linked with the DWC3 USB controller
switched to OTG mode and tagged with usb-role-switch.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230130-topic-sm8450-upstream-pmic-glink-v5-9-552f3b721f9e@linaro.org

show more ...

arm64: dts: qcom: sm8350-hdk: enable GPU

Enable the GPU on the SM8350-HDK device. The ZAP shader is required for
the GPU to function properly.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

arm64: dts: qcom: sm8350-hdk: enable GPU

Enable the GPU on the SM8350-HDK device. The ZAP shader is required for
the GPU to function properly.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230209133839.762631-7-dmitry.baryshkov@linaro.org

show more ...

arm64: dts: qcom: sm8350-hdk: correct LT9611 pin function

SM8350 pin controller does not have "normal" pin function, so use
"gpio".

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.or

arm64: dts: qcom: sm8350-hdk: correct LT9611 pin function

SM8350 pin controller does not have "normal" pin function, so use
"gpio".

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Fixes: d96d8f9192be ("arm64: dts: qcom: sm8350-hdk: Enable lt9611uxc dsi-hdmi bridge")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230201154321.276419-2-krzysztof.kozlowski@linaro.org

show more ...

arm64: dts: qcom: sm8350-hdk: align pin config node names with bindings

Bindings expect pins to be named with certain pattern.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Fi

arm64: dts: qcom: sm8350-hdk: align pin config node names with bindings

Bindings expect pins to be named with certain pattern.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Fixes: d96d8f9192be ("arm64: dts: qcom: sm8350-hdk: Enable lt9611uxc dsi-hdmi bridge")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230201154321.276419-1-krzysztof.kozlowski@linaro.org

show more ...

arm64: dts: qcom: sm8350: align RPMh regulator nodes with bindings

Device node names should be generic and bindings expect certain pattern
for RPMh regulator nodes.

Signed-off-by: Krzysztof Kozlows

arm64: dts: qcom: sm8350: align RPMh regulator nodes with bindings

Device node names should be generic and bindings expect certain pattern
for RPMh regulator nodes.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230127114347.235963-10-krzysztof.kozlowski@linaro.org

show more ...

arm64: dts: qcom: sm8350: Add mdss_ prefix to DSIn out labels

Add the mdss_ prefix to DSIn labels, so that the hardware blocks can
be organized near each other while retaining the alphabetical order

arm64: dts: qcom: sm8350: Add mdss_ prefix to DSIn out labels

Add the mdss_ prefix to DSIn labels, so that the hardware blocks can
be organized near each other while retaining the alphabetical order
in device DTs when referencing by label.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230120210101.2146852-7-konrad.dybcio@linaro.org

show more ...

arm64: dts: qcom: sm8350: Add &tlmm gpio-line-names

Add GPIO line names as described by the sm8350-hdk schematic.

Signed-off-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Bjorn Andersson

arm64: dts: qcom: sm8350: Add &tlmm gpio-line-names

Add GPIO line names as described by the sm8350-hdk schematic.

Signed-off-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230117112537.1016250-1-rfoss@kernel.org

show more ...

arm64: dts: qcom: sm8350-hdk: Enable lt9611uxc dsi-hdmi bridge

The sm8350-hdk ships with the LT9611 UXC DSI/HDMI bridge chip.

In order to toggle the board to enable the HDMI output,
switch #7 & #8

arm64: dts: qcom: sm8350-hdk: Enable lt9611uxc dsi-hdmi bridge

The sm8350-hdk ships with the LT9611 UXC DSI/HDMI bridge chip.

In order to toggle the board to enable the HDMI output,
switch #7 & #8 on the rightmost multi-switch package have
to be toggled to On.

Signed-off-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230117120223.1055225-4-rfoss@kernel.org

show more ...

arm64: dts: qcom: sm8350-hdk: Enable display & dsi nodes

Enable the display subsystem and the dsi0 output for
the sm8350-hdk board.

Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by:

arm64: dts: qcom: sm8350-hdk: Enable display & dsi nodes

Enable the display subsystem and the dsi0 output for
the sm8350-hdk board.

Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230117120223.1055225-3-rfoss@kernel.org

show more ...

arm64: dts: qcom: sm8350-hdk: enable PCIe devices

Enable PCIe0 and PCIe1 hosts found on SM8350 HDK board.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersso

arm64: dts: qcom: sm8350-hdk: enable PCIe devices

Enable PCIe0 and PCIe1 hosts found on SM8350 HDK board.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221118233242.2904088-9-dmitry.baryshkov@linaro.org

show more ...

arm64: dts: qcom: clean up 'regulator-allowed-modes' indentation

When recently adding the missing 'regulator-allowed-modes' properties it
appears that the binding example with its four-spaces indent

arm64: dts: qcom: clean up 'regulator-allowed-modes' indentation

When recently adding the missing 'regulator-allowed-modes' properties it
appears that the binding example with its four-spaces indentation
(corresponding to a single tab, which is still to little) was copied
verbatim.

Drop the unnecessary first line break after 'regulator-allowed-modes'
properties and indent the single remaining continuation line properly.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221116102054.4673-3-johan+linaro@kernel.org

show more ...

arm64: dts: qcom: sm8350-hdk: Specify which LDO modes are allowed

This board uses RPMH, specifies "regulator-allow-set-load" for LDOs,
but doesn't specify any modes with "regulator-allowed-modes".

arm64: dts: qcom: sm8350-hdk: Specify which LDO modes are allowed

This board uses RPMH, specifies "regulator-allow-set-load" for LDOs,
but doesn't specify any modes with "regulator-allowed-modes".

Prior to commit efb0cb50c427 ("regulator: qcom-rpmh: Implement
get_optimum_mode(), not set_load()") the above meant that we were able
to set either LPM or HPM mode. After that commit (and fixes [1]) we'll
be stuck at the initial mode. Discussion of this has resulted in the
decision that the old dts files were wrong and should be fixed to
fully restore old functionality.

Let's re-enable the old functionality by fixing the dts.

[1] https://lore.kernel.org/r/20220824142229.RFT.v2.2.I6f77860e5cd98bf5c67208fa9edda4a08847c304@changeid

Fixes: 9208c19f2124 ("arm64: dts: qcom: Introduce SM8350 HDK")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220829094903.v2.6.I6799be85cf36d3b494f803cba767a569080624f5@changeid

show more ...

arm64: dts: qcom: sm8350-hdk: Enable &gpi_dma1

Some versions of the firmware for the SM8350 Hardware Development Kit
(HDK) has FIFO mode disabled for i2c13 and must thus use GPI DMA. Enable
&gpi_dma

arm64: dts: qcom: sm8350-hdk: Enable &gpi_dma1

Some versions of the firmware for the SM8350 Hardware Development Kit
(HDK) has FIFO mode disabled for i2c13 and must thus use GPI DMA. Enable
&gpi_dma1 to allow this.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20220412215137.2385831-3-bjorn.andersson@linaro.org

show more ...