drm/print: drop include debugfs.h and include where needed

Surprisingly many places depend on debugfs.h to be included via
drm_print.h. Fix them.

v3: Also fix armada, ite-it6505, imagination, msm,

drm/print: drop include debugfs.h and include where needed

Surprisingly many places depend on debugfs.h to be included via
drm_print.h. Fix them.

v3: Also fix armada, ite-it6505, imagination, msm, sti, vc4, and xe

v2: Also fix ivpu and vmwgfx

Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240410141434.157908-1-jani.nikula@intel.com
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # drm/msm
Acked-by: Matt Coster <matt.coster@imgtec.com> # drm/imagination
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Robert Foss <rfoss@kernel.org> #drm/bridge
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240422121011.4133236-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

show more ...

drm/bridge: it6505: switch to ->edid_read callback

Prefer using the struct drm_edid based callback and functions.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Neil Armstrong <nei

drm/bridge: it6505: switch to ->edid_read callback

Prefer using the struct drm_edid based callback and functions.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/5d2579802e277cc562bde6c4e26a5b63ff0e02ae.1706038510.git.jani.nikula@intel.com

show more ...

drm/bridge: Fixed a DP link training bug

To have better compatibility for DP sink, there is a retry mechanism
for the link training process to switch between different training process.
The original

drm/bridge: Fixed a DP link training bug

To have better compatibility for DP sink, there is a retry mechanism
for the link training process to switch between different training process.
The original driver code doesn't reset the retry counter when training
state is pass. If the system triggers link training over 3 times,
there will be a chance to causes the driver to use the wrong training
method and return a training fail result.

To Fix this, we reset the retry counter when training state is pass
each time.

Signed-off-by: Allen Chen <allen.chen@ite.corp-partner.google.com>
Signed-off-by: xiazhengqiao <xiazhengqiao@huaqin.corp-partner.google.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231221093057.7073-1-xiazhengqiao@huaqin.corp-partner.google.com

show more ...

drm/bridge: it6505: Check power state with it6505->powered in IRQ handler

On system resume, the driver might call it6505_poweron directly if the
runtime PM hasn't been enabled. In such case, pm_runt

drm/bridge: it6505: Check power state with it6505->powered in IRQ handler

On system resume, the driver might call it6505_poweron directly if the
runtime PM hasn't been enabled. In such case, pm_runtime_get_if_in_use
will always return 0 because dev->power.runtime_status stays at
RPM_SUSPENDED, and the IRQ will never be handled.

Use it6505->powered from the driver struct fixes this because it always
gets updated when it6505_poweron is called.

Fixes: 5eb9a4314053 ("drm/bridge: it6505: Guard bridge power in IRQ handler")
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230727100131.2338127-1-treapking@chromium.org

show more ...

drm/bridge: Remove redundant i2c_client in anx7625/it6505

These two drivers embed a i2c_client in their private driver data, but
only strict device is actually needed. Replace the i2c_client referen

drm/bridge: Remove redundant i2c_client in anx7625/it6505

These two drivers embed a i2c_client in their private driver data, but
only strict device is actually needed. Replace the i2c_client reference
with a struct device one.

Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230718110407.1005200-1-wenst@chromium.org

show more ...

drm: Switch i2c drivers back to use .probe()

After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
03c835f498b5 ("i

drm: Switch i2c drivers back to use .probe()

After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
03c835f498b5 ("i2c: Switch .probe() to not take an id parameter") convert
back to (the new) .probe() to be able to eventually drop .probe_new() from
struct i2c_driver.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Martyn Welch <martyn.welch@collabora.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230526090709.1517297-1-u.kleine-koenig@pengutronix.de

show more ...

drm/bridge: it6505: Move a variable assignment behind a null pointer check in receive_timing_debugfs_show()

The address of a data structure member was determined before
a corresponding null pointer

drm/bridge: it6505: Move a variable assignment behind a null pointer check in receive_timing_debugfs_show()

The address of a data structure member was determined before
a corresponding null pointer check in the implementation of
the function “receive_timing_debugfs_show”.

Thus avoid the risk for undefined behaviour by moving the assignment
for the variable “vid” behind the null pointer check.

This issue was detected by using the Coccinelle software.

Fixes: b5c84a9edcd4 ("drm/bridge: add it6505 driver")
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Link: https://patchwork.freedesktop.org/patch/msgid/fa69384f-1485-142b-c4ee-3df54ac68a89@web.de
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>

show more ...

drm/bridge: it6505: Add range and selector_reg

There are 2 banks on it6505, and when writing to different bank,
REG_BANK_SEL needs to be set to the targeted bank. The current code set
this additiona

drm/bridge: it6505: Add range and selector_reg

There are 2 banks on it6505, and when writing to different bank,
REG_BANK_SEL needs to be set to the targeted bank. The current code set
this additionally, which causes a race condition when a process is
writing bank 0 registers while another process set the bank to 1. Set
ranges in regmap config so the regmap API would handle the bank changes.

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230327044804.3657551-1-hsinyi@chromium.org

show more ...

drm/bridge: Remove unnecessary include statements for drm_crtc_helper.h

Several source files include drm_crtc_helper.h without needing it or
only to get its transitive include statements; leading to

drm/bridge: Remove unnecessary include statements for drm_crtc_helper.h

Several source files include drm_crtc_helper.h without needing it or
only to get its transitive include statements; leading to unnecessary
compile-time dependencies.

Drop drm_crtc_helper.h where possible.

v2:
* update commit message (Sam)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230116131235.18917-8-tzimmermann@suse.de

show more ...

drm/bridge: add it6505 driver to read data-lanes and link-frequencies from dt

Add driver to read data-lanes and link-frequencies from dt property to
restrict output bandwidth.

Signed-off-by: allen

drm/bridge: add it6505 driver to read data-lanes and link-frequencies from dt

Add driver to read data-lanes and link-frequencies from dt property to
restrict output bandwidth.

Signed-off-by: allen chen <allen.chen@ite.com.tw>
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103091243.96036-3-allen.chen@ite.com.tw
Link: https://patchwork.freedesktop.org/patch/msgid/20221103091243.96036-2-allen.chen@ite.com.tw
Link: https://patchwork.freedesktop.org/patch/msgid/20221103091243.96036-3-allen.chen@ite.com.tw

show more ...

drm/bridge: it6505: Add caching for EDID

Add caching when EDID is read, and invalidate the cache until the
bridge detects HPD low or sink count changes on HPD_IRQ.

It takes 1.2s for IT6505 bridge t

drm/bridge: it6505: Add caching for EDID

Add caching when EDID is read, and invalidate the cache until the
bridge detects HPD low or sink count changes on HPD_IRQ.

It takes 1.2s for IT6505 bridge to read a 3-block EDID, and skipping
one EDID read would be a notable difference on user experience.

Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221115112720.911158-1-treapking@chromium.org

show more ...

drm/bridge: it6505: Guard bridge power in IRQ handler

Add a pair of pm_runtime_get_if_in_use and pm_runtime_put_sync in the
interrupt handler to make sure the bridge won't be powered off during
the

drm/bridge: it6505: Guard bridge power in IRQ handler

Add a pair of pm_runtime_get_if_in_use and pm_runtime_put_sync in the
interrupt handler to make sure the bridge won't be powered off during
the interrupt handlings. Also remove the irq_lock mutex because it's not
guarding anything now.

Fixes: ab28896f1a83 ("drm/bridge: it6505: Improve synchronization between extcon subsystem")
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221109095227.3320919-1-treapking@chromium.org

show more ...

drm/bridge: it6505: Convert to i2c's .probe_new()

The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König <u.kleine-ko

drm/bridge: it6505: Convert to i2c's .probe_new()

The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20221118224540.619276-21-uwe@kleine-koenig.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>

show more ...

drm/bridge: it6505: Fix return value check for pm_runtime_get_sync

`pm_runtime_get_sync` may return 1 on success. Fix the `if` statement
here to make the code less confusing, even though additional

drm/bridge: it6505: Fix return value check for pm_runtime_get_sync

`pm_runtime_get_sync` may return 1 on success. Fix the `if` statement
here to make the code less confusing, even though additional calls to
`it6505_poweron` doesn't break anything when it's already powered.

This was reported by Dan Carpenter <dan.carpenter@oracle.com> in
https://lore.kernel.org/all/Y1fMCs6VnxbDcB41@kili/

Fixes: 10517777d302 ("drm/bridge: it6505: Adapt runtime power management framework")
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221027032149.2739912-1-treapking@chromium.org

show more ...

drm/bridge: it6505: Improve synchronization between extcon subsystem

Originally, the it6505 relies on a short sleep in the IRQ handler and a
long sleep to make sure it6505->lane_swap and it6505->lan

drm/bridge: it6505: Improve synchronization between extcon subsystem

Originally, the it6505 relies on a short sleep in the IRQ handler and a
long sleep to make sure it6505->lane_swap and it6505->lane_count is
configured in it6505_extcon_work and it6505_detect, respectively.

Use completion and additional DPCD read to remove the unnecessary waits,
and use a different lock for it6505_extcon_work and the threaded IRQ
handler because they no longer need to run exclusively.

The wait time of the completion is usually less than 10ms in local
experiments, but leave it larger here just in case.

Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221013110411.1674359-4-treapking@chromium.org

show more ...

drm/bridge: it6505: Setup links in it6505_irq_hpd

Move the DPCD read and link setup steps to HPD IRQ handler to remove
an unnecessary dependency between .detect callback and the HPD IRQ
handler befo

drm/bridge: it6505: Setup links in it6505_irq_hpd

Move the DPCD read and link setup steps to HPD IRQ handler to remove
an unnecessary dependency between .detect callback and the HPD IRQ
handler before registering it6505 as a DRM bridge. This is safe because
there is always a .detect call after each HPD IRQ handler triggered by
the drm_helper_hpd_irq_event call.

Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221013110411.1674359-3-treapking@chromium.org

show more ...

drm/bridge: it6505: Initialize AUX channel in it6505_i2c_probe

During device boot, the HPD interrupt could be triggered before the DRM
subsystem registers it6505 as a DRM bridge. In such cases, the

drm/bridge: it6505: Initialize AUX channel in it6505_i2c_probe

During device boot, the HPD interrupt could be triggered before the DRM
subsystem registers it6505 as a DRM bridge. In such cases, the driver
tries to access AUX channel and causes NULL pointer dereference.
Initializing the AUX channel earlier to prevent such error.

Fixes: b5c84a9edcd4 ("drm/bridge: add it6505 driver")
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221013110411.1674359-2-treapking@chromium.org

show more ...

drm/bridge: it6505: Add pre_enable/post_disable callback

Add atomic_pre_enable and atomic_post_disable callback to make sure the
bridge is not powered off until atomic_post_disable is called. This
p

drm/bridge: it6505: Add pre_enable/post_disable callback

Add atomic_pre_enable and atomic_post_disable callback to make sure the
bridge is not powered off until atomic_post_disable is called. This
prevents a power leakage when it6505 is powered off, but the upstream
DRM bridge is still sending display signals.

Fixes: b5c84a9edcd4 ("drm/bridge: add it6505 driver")
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221004044943.2407781-3-treapking@chromium.org

show more ...

drm/bridge: it6505: Adapt runtime power management framework

Use pm_runtime_(get|put)_sync to control the bridge power, and add
SET_SYSTEM_SLEEP_PM_OPS with pm_runtime_force_(suspend|resume) to it65

drm/bridge: it6505: Adapt runtime power management framework

Use pm_runtime_(get|put)_sync to control the bridge power, and add
SET_SYSTEM_SLEEP_PM_OPS with pm_runtime_force_(suspend|resume) to it6505
driver. Without SET_SYSTEM_SLEEP_PM_OPS, the bridge will be powered on
unnecessarily when no external display is connected.

Fixes: b5c84a9edcd4 ("drm/bridge: add it6505 driver")
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221004044943.2407781-2-treapking@chromium.org

show more ...

drm/bridge: it6505: use drm_debug_enabled() in it6505_debug_print()

As made mention of in commit 9f0ac028410f ("drm/print: rename drm_debug
to __drm_debug to discourage use"), we shouldn't explicitl

drm/bridge: it6505: use drm_debug_enabled() in it6505_debug_print()

As made mention of in commit 9f0ac028410f ("drm/print: rename drm_debug
to __drm_debug to discourage use"), we shouldn't explicitly refer to
__drm_debug in this context. So, use drm_debug_enabled() instead.

Fixes: b5c84a9edcd4 ("drm/bridge: add it6505 driver")
Signed-off-by: Hamza Mahfooz <someguy@effective-light.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220910224816.15058-1-someguy@effective-light.com

show more ...

drm/bridge: it6505: Fix the order of DP_SET_POWER commands

Send DP_SET_POWER_D3 command to the downstream before stopping DP, so the
suspend process will not be interrupted by the HPD interrupt. Als

drm/bridge: it6505: Fix the order of DP_SET_POWER commands

Send DP_SET_POWER_D3 command to the downstream before stopping DP, so the
suspend process will not be interrupted by the HPD interrupt. Also modify
the order in .atomic_enable callback to make the callbacks symmetric.

Fixes: 46ca7da7f1e8 ("drm/bridge: it6505: Send DPCD SET_POWER to downstream")
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220830045756.1655954-1-treapking@chromium.org

show more ...

i2c: Make remove callback return void

The value returned by an i2c driver's remove function is mostly ignored.
(Only an error message is printed if the value is non-zero that the
error is ignored.)

i2c: Make remove callback return void

The value returned by an i2c driver's remove function is mostly ignored.
(Only an error message is printed if the value is non-zero that the
error is ignored.)

So change the prototype of the remove function to return no value. This
way driver authors are not tempted to assume that passing an error to
the upper layer is a good idea. All drivers are adapted accordingly.
There is no intended change of behaviour, all callbacks were prepared to
return 0 before.

Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com>
Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au>
Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Crt Mori <cmo@melexis.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/*
Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5
Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio
Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860
Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b
Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes
Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power
Acked-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

show more ...

drm/bridge: it6505: Modified video clock calculation and video debug message

Speed up video clock calculation and remove redundant video debug message.

Signed-off-by: Pin-Yen Lin <treapking@chromiu

drm/bridge: it6505: Modified video clock calculation and video debug message

Speed up video clock calculation and remove redundant video debug message.

Signed-off-by: Pin-Yen Lin <treapking@chromium.org>
Signed-off-by: Allen Chen <allen.chen@ite.com.tw>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220715024910.12578-4-allen.chen@ite.com.tw

show more ...

drm/bridge: it6505: Add i2c api power on check

Use i2c bus to read/write when it6505 power off will occur i2c error.
Add this check will prevent i2c error when it6505 power off.

Signed-off-by: Pin-

drm/bridge: it6505: Add i2c api power on check

Use i2c bus to read/write when it6505 power off will occur i2c error.
Add this check will prevent i2c error when it6505 power off.

Signed-off-by: Pin-Yen Lin <treapking@chromium.org>
Signed-off-by: Allen Chen <allen.chen@ite.com.tw>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220715024910.12578-3-allen.chen@ite.com.tw

show more ...

drm/bridge: it6505: Modified power sequence

Change power sequence to meet it6505 data sheet requirement when boot on.

Signed-off-by: Pin-Yen Lin <treapking@chromium.org>
Signed-off-by: Allen Chen <

drm/bridge: it6505: Modified power sequence

Change power sequence to meet it6505 data sheet requirement when boot on.

Signed-off-by: Pin-Yen Lin <treapking@chromium.org>
Signed-off-by: Allen Chen <allen.chen@ite.com.tw>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220715024910.12578-2-allen.chen@ite.com.tw

show more ...