media: platform: replace of_graph_get_next_endpoint()

From DT point of view, in general, drivers should be asking for a
specific port number because their function is fixed in the binding.

of_graph

media: platform: replace of_graph_get_next_endpoint()

From DT point of view, in general, drivers should be asking for a
specific port number because their function is fixed in the binding.

of_graph_get_next_endpoint() doesn't match to this concept.

Simply replace

- of_graph_get_next_endpoint(xxx, NULL);
+ of_graph_get_endpoint_by_regs(xxx, 0, -1);

Link: https://lore.kernel.org/r/20240202174941.GA310089-robh@kernel.org
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

show more ...

media: videobuf2: core: Rename min_buffers_needed field in vb2_queue

Rename min_buffers_needed into min_queued_buffers and update
the documentation about it.

Signed-off-by: Benjamin Gaignard <benja

media: videobuf2: core: Rename min_buffers_needed field in vb2_queue

Rename min_buffers_needed into min_queued_buffers and update
the documentation about it.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: Drop the change where min_queued_buffers + 1 buffers would be]
[hverkuil: allocated. Now this patch only renames this field instead of making]
[hverkuil: a functional change as well.]
[hverkuil: Renamed 3 remaining min_buffers_needed occurrences.]

show more ...

media: stm32-dcmi: Drop unnecessary of_match_device() call

If probe is reached, we've already matched the device and in the case of
DT matching, the struct device_node pointer will be set. Therefore

media: stm32-dcmi: Drop unnecessary of_match_device() call

If probe is reached, we've already matched the device and in the case of
DT matching, the struct device_node pointer will be set. Therefore, there
is no need to call of_match_device() in probe.

Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

show more ...

media: stm32: dcmi: only call s_stream on the source subdev

Avoid calling s_stream on each subdev until reaching the sensor and
instead call s_stream on the source subdev only (which will in turn
do

media: stm32: dcmi: only call s_stream on the source subdev

Avoid calling s_stream on each subdev until reaching the sensor and
instead call s_stream on the source subdev only (which will in turn
do whatever needed to start the stream).

Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Reviewed-by: Hugues FRUCHET <hugues.fruchet@foss.st.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

show more ...

media: v4l: async: Set v4l2_device and subdev in async notifier init

Set the v4l2_device already in async notifier init, so struct device
related to it will be available before the notifier is regis

media: v4l: async: Set v4l2_device and subdev in async notifier init

Set the v4l2_device already in async notifier init, so struct device
related to it will be available before the notifier is registered. This
requires separating notifier initialisation into two functions, one that
takes v4l2_device as its argument, v4l2_async_nf_init and
v4l2_async_subdev_nf_init, for sub-device notifiers. Registering the
notifier will use a single function, v4l2_async_nf_register.

This is done in order to make struct device available earlier, during
construction of the async connections, for sensible debug prints.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp
Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x
Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

show more ...

media: v4l: async: Rename v4l2_async_subdev as v4l2_async_connection

Rename v4l2_async_subdev as v4l2_async_connection, in order to
differentiate between the sub-devices and their connections: one
s

media: v4l: async: Rename v4l2_async_subdev as v4l2_async_connection

Rename v4l2_async_subdev as v4l2_async_connection, in order to
differentiate between the sub-devices and their connections: one
sub-device can have many connections but the V4L2 async framework has so
far allowed just a single one. Connections in this context will later
translate into either MC ancillary or data links.

This patch prepares changing that relation by changing existing users of
v4l2_async_subdev to switch to v4l2_async_connection. Async sub-devices
themselves will not be needed anymore

Additionally, __v4l2_async_nf_add_subdev() has been renamed
__v4l2_async_nf_add_connection().

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp
Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x
Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

show more ...

media: stm32-dcmi: Use devm_platform_get_and_ioremap_resource()

Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exac

media: stm32-dcmi: Use devm_platform_get_and_ioremap_resource()

Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.

Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

show more ...

media: stm32-dcmi: Convert to platform remove callback returning void

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do e

media: stm32-dcmi: Convert to platform remove callback returning void

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

show more ...

media: stm32-dcmi: Enable incoherent buffer allocation

Set allow_cache_hints to 1 for the vb2_queue capture queue in the
STM32MP15xx DCMI V4L2 driver. This allows us to allocate buffers
with the V4L

media: stm32-dcmi: Enable incoherent buffer allocation

Set allow_cache_hints to 1 for the vb2_queue capture queue in the
STM32MP15xx DCMI V4L2 driver. This allows us to allocate buffers
with the V4L2_MEMORY_FLAG_NON_COHERENT set. On STM32MP15xx SoCs,
this enables caching for this memory, which improves performance
when being read from CPU.

This change should be safe from race conditions since videobuf2
already invalidates or flushes the appropriate cache lines in
its prepare() and finish() methods.

Tested on a STM32MP157F SoC. Resulted in 4x buffer access speedup.

Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

show more ...

media: Switch to use dev_err_probe() helper

In the probe path, dev_err() can be replaced with dev_err_probe()
which will check if error code is -EPROBE_DEFER.

Reviewed-by: Sean Young <sean@mess.org

media: Switch to use dev_err_probe() helper

In the probe path, dev_err() can be replaced with dev_err_probe()
which will check if error code is -EPROBE_DEFER.

Reviewed-by: Sean Young <sean@mess.org>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

show more ...

media: stm32: dcmi: Remove redundant dev_err call

devm_ioremap_resource() prints error message in itself. Remove the
dev_err call to avoid redundant error message.

Signed-off-by: Shang XiaoJing <sh

media: stm32: dcmi: Remove redundant dev_err call

devm_ioremap_resource() prints error message in itself. Remove the
dev_err call to avoid redundant error message.

Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Acked-by: Hugues Fruchet <hugues.fruchet@foss.st.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

show more ...

media: drivers: use video device pipeline start/stop

Convert the media drivers to use video device based pipeline start/stop
where possible.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboa

media: drivers: use video device pipeline start/stop

Convert the media drivers to use video device based pipeline start/stop
where possible.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

show more ...

media: mc-entity: Rename media_entity_remote_pad() to media_pad_remote_pad_first()

The media_entity_remote_pad() is misnamed, as it operates on a pad and
not an entity. Rename it to media_pad_remote

media: mc-entity: Rename media_entity_remote_pad() to media_pad_remote_pad_first()

The media_entity_remote_pad() is misnamed, as it operates on a pad and
not an entity. Rename it to media_pad_remote_pad_first() to clarify its
behaviour.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

show more ...

media: stm32: dcmi: Fix subdev op call with uninitialized state

stm32-dcmi calls its source subdev with v4l2_subdev_call() using a
v4l2_subdev_state constructed on stack. This means that init_cfg is

media: stm32: dcmi: Fix subdev op call with uninitialized state

stm32-dcmi calls its source subdev with v4l2_subdev_call() using a
v4l2_subdev_state constructed on stack. This means that init_cfg is
never called for that state, and a source subdev that depends on the
init_cfg call may break.

A new macro has been added for this particular purpose, which properly
initializes the state, so let's use v4l2_subdev_call_state_try() here.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Tested-by: Marek Vasut <marex@denx.de>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

show more ...

media: stm32-dcmi: add support of 1X16 serial pixel formats variant

Add support of 1X16 serial pixel formats in order to support
CSI-2 camera sensor exposing 1x16 pixel formats only.

Signed-off-by:

media: stm32-dcmi: add support of 1X16 serial pixel formats variant

Add support of 1X16 serial pixel formats in order to support
CSI-2 camera sensor exposing 1x16 pixel formats only.

Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

show more ...

media: stm32: dcmi: Drop always NULL sd_state from dcmi_pipeline_s_fmt()

The second argument is always NULL, stop passing it to the function.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alain Vo

media: stm32: dcmi: Drop always NULL sd_state from dcmi_pipeline_s_fmt()

The second argument is always NULL, stop passing it to the function.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alain Volmat <alain.volmat@foss.st.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Amelie DELAUNAY <amelie.delaunay@foss.st.com>
Cc: Hugues FRUCHET <hugues.fruchet@foss.st.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Philippe CORNU <philippe.cornu@foss.st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

show more ...

media: stm32: dcmi: Fill in remaining Bayer formats

Fill in 10, 12, 14 bit Bayer formats into the DCMI driver.
Those are useful e.g. when MT9P006 sensor is connected.

Signed-off-by: Marek Vasut <ma

media: stm32: dcmi: Fill in remaining Bayer formats

Fill in 10, 12, 14 bit Bayer formats into the DCMI driver.
Those are useful e.g. when MT9P006 sensor is connected.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alain Volmat <alain.volmat@foss.st.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Amelie DELAUNAY <amelie.delaunay@foss.st.com>
Cc: Hugues FRUCHET <hugues.fruchet@foss.st.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Philippe CORNU <philippe.cornu@foss.st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

show more ...

media: mc: Set bus_info in media_device_init()

Set bus_info field based on struct device in media_device_init() and
remove corresponding code from drivers.

Also update media_device_init() documenta

media: mc: Set bus_info in media_device_init()

Set bus_info field based on struct device in media_device_init() and
remove corresponding code from drivers.

Also update media_device_init() documentation: the dev field must be now
initialised before calling it.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

show more ...

media: platform: place stm32/ and sti/ under st/ dir

As the end goal is to have platform drivers split by vendor,
move both stm32/ and sti/ for them to be inside st/ directory.

Acked-by: Hugues Fru

media: platform: place stm32/ and sti/ under st/ dir

As the end goal is to have platform drivers split by vendor,
move both stm32/ and sti/ for them to be inside st/ directory.

Acked-by: Hugues Fruchet <hugues.fruchet@st.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

show more ...