| #
b376d963 |
| 28-Sep-2022 |
Felix Fietkau <nbd@nbd.name> |
wifi: mt76: move mt76_rate_power from core to mt76x02 driver code
Its layout and code is mt76x02 specific
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
| #
633f77b5 |
| 21-Nov-2021 |
Lorenzo Bianconi <lorenzo@kernel.org> |
mt76: mt76x02: introduce SAR support
Add SAR spec support to mt76x02 driver to allow configuring SAR power
limitations on the frequency ranges from the userland.
Signed-off-by: Lorenzo Bianconi <lo
mt76: mt76x02: introduce SAR support
Add SAR spec support to mt76x02 driver to allow configuring SAR power
limitations on the frequency ranges from the userland.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
| #
049019c2 |
| 06-Feb-2020 |
Felix Fietkau <nbd@nbd.name> |
mt76: mt76x2: avoid starting the MAC too early
Do not set the tx/rx start bits in MT_MAC_SYS_CTRL from within initvals.
The driver sets these later when the hardware is ready
Signed-off-by: Felix F
mt76: mt76x2: avoid starting the MAC too early
Do not set the tx/rx start bits in MT_MAC_SYS_CTRL from within initvals.
The driver sets these later when the hardware is ready
Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
| #
0e3d6777 |
| 24-Jul-2019 |
Ryder Lee <ryder.lee@mediatek.com> |
mt76: switch to SPDX tag instead of verbose boilerplate text
No functional change intended.
Add SPDX identifiers to all remaining files in /mt76.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
mt76: switch to SPDX tag instead of verbose boilerplate text
No functional change intended.
Add SPDX identifiers to all remaining files in /mt76.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
| #
09952572 |
| 31-May-2019 |
Felix Fietkau <nbd@nbd.name> |
mt76: fix setting chan->max_power
When setting chan->max_power after registering the wiphy, chan->max_reg_power
needs to be used as a limit
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
| #
cee646d6 |
| 27-Mar-2019 |
Felix Fietkau <nbd@nbd.name> |
mt76: fix tx power issues
- tx power is stored in the channels after ieee80211_register_hw, so
chan->orig_mpwr needs to be updated as well
- for non-TSSI devices, mt76x2e needs to use a different
mt76: fix tx power issues
- tx power is stored in the channels after ieee80211_register_hw, so
chan->orig_mpwr needs to be updated as well
- for non-TSSI devices, mt76x2e needs to use a different target power value
from the EEPROM
- fix a rounding error in a few places (need to round up, not down)
Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
| #
7dfc45e6 |
| 12-Mar-2019 |
Stanislaw Gruszka <sgruszka@redhat.com> |
mt76x02: do not enable RTS/CTS by default
My commit 26a7b5473191 ("mt76x02: set protection according to ht
operation element") enabled by default RTS/CTS protection for OFDM
and CCK traffic, because
mt76x02: do not enable RTS/CTS by default
My commit 26a7b5473191 ("mt76x02: set protection according to ht
operation element") enabled by default RTS/CTS protection for OFDM
and CCK traffic, because MT_TX_RTS_CFG_THRESH is configured to non
0xffff by initvals and .set_rts_threshold callback is not called by
mac80211 on initialization, only on user request or during
ieee80211_reconfig() (suspend/resuem or restart_hw).
Enabling RTS/CTS cause some problems when sending probe request
frames by hcxdumptool penetration tool, but I expect it can cause
other issues on different scenarios.
Restore previous setting of RTS/CTS being disabled by default for
OFDM/CCK by changing MT_TX_RTS_CFG_THRESH initvals to 0xffff.
Fixes: 26a7b5473191 ("mt76x02: set protection according to ht operation element")
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
show more ...
|
| #
3fd612df |
| 12-Dec-2018 |
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> |
mt76x2: init: set default value for MT_TX_LINK_CFG
Update default value for MT_TX_LINK_CFG according to vendor driver
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Fe
mt76x2: init: set default value for MT_TX_LINK_CFG
Update default value for MT_TX_LINK_CFG according to vendor driver
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
| #
5cbace02 |
| 20-Oct-2018 |
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> |
mt76: move mt76x02_init_device in mt76x02-lib module
Move mt76x02_init_device routine in mt76x02_util.c in order to be
reused by mt76x0 driver and remove duplicated code. Move interface
combo defini
mt76: move mt76x02_init_device in mt76x02-lib module
Move mt76x02_init_device routine in mt76x02_util.c in order to be
reused by mt76x0 driver and remove duplicated code. Move interface
combo definition supported by the driver in mt76x02_init_device routine
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
| #
70289adc |
| 15-Oct-2018 |
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> |
mt76x2u: introduce mac workqueue support
Add mac workqueue support to mt76x2u driver in order
to compute device statistics and add mac stuck routine
Signed-off-by: Lorenzo Bianconi <lorenzo.biancon
mt76x2u: introduce mac workqueue support
Add mac workqueue support to mt76x2u driver in order
to compute device statistics and add mac stuck routine
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
| #
f3727dae |
| 08-Oct-2018 |
Stanislaw Gruszka <sgruszka@redhat.com> |
mt76: reserve enough room for USB tx skbs
Reserve enough room for USB skb, so we don not need to check
the room every time we send frame.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Sign
mt76: reserve enough room for USB tx skbs
Reserve enough room for USB skb, so we don not need to check
the room every time we send frame.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
| #
e40803f2 |
| 04-Oct-2018 |
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> |
mt76x2: move mt76x2_dev in mt76x02_util.h
Move mt76x2_dev in mt76x02_util.h and rename it in mt76x02_dev
in order to be shared between mt76x2 and mt76x0 driver
Signed-off-by: Lorenzo Bianconi <lore
mt76x2: move mt76x2_dev in mt76x02_util.h
Move mt76x2_dev in mt76x02_util.h and rename it in mt76x02_dev
in order to be shared between mt76x2 and mt76x0 driver
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
| #
1613c621 |
| 01-Oct-2018 |
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> |
mt76x2: move mt76x2 source files to mt76x2 folder
Move mt76x2 and mt76x2u drivers to mt76x2 subfolder and
leave just shared code in mt76 root folder
Acked-by: Stanislaw Gruszka <sgruszka@redhat.com
mt76x2: move mt76x2 source files to mt76x2 folder
Move mt76x2 and mt76x2u drivers to mt76x2 subfolder and
leave just shared code in mt76 root folder
Acked-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|