wifi: mt76: connac: enable critical packet mode support for mt7992

For mt7992 chipsets, critical packet mode should be properly configured
to let the HW SDO module correctly fill the AC queue in TX

wifi: mt76: connac: enable critical packet mode support for mt7992

For mt7992 chipsets, critical packet mode should be properly configured
to let the HW SDO module correctly fill the AC queue in TX descriptors of
some higher priority packets such as ARP and ICMP.
Without this patch, HW queues may hang when running MU traffic.

Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

show more ...

wifi: mt76: connac: use peer address for station BMC entry

Set peer address and aid for the BMC wtbl of station interface. For some
functions such as parsing MU_EDCA parameters from beacon, firmware

wifi: mt76: connac: use peer address for station BMC entry

Set peer address and aid for the BMC wtbl of station interface. For some
functions such as parsing MU_EDCA parameters from beacon, firmware will
need the peer address to do correct parsing.
Without this patch, MU uplink traffic would get suffered.

Reported-by: Howard Hsu <howard-yh.hsu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

show more ...

wifi: mt76: mt7996: fix size of txpower MCU command

Fixes issues with scanning and low power output at some rates.

Fixes: f75e4779d215 ("wifi: mt76: mt7996: add txpower setting support")
Signed-off

wifi: mt76: mt7996: fix size of txpower MCU command

Fixes issues with scanning and low power output at some rates.

Fixes: f75e4779d215 ("wifi: mt76: mt7996: add txpower setting support")
Signed-off-by: Chad Monroe <chad@monroe.io>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

show more ...

wifi: mt76: mt7996: add locking for accessing mapped registers

A race condition was observed when accessing mapped registers, so add
locking to protect against concurrent access.

Signed-off-by: Sha

wifi: mt76: mt7996: add locking for accessing mapped registers

A race condition was observed when accessing mapped registers, so add
locking to protect against concurrent access.

Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

show more ...

wifi: mt76: mt7996: fix TWT issues

This patch fixes the following TWT issues:
- Change table_mask to u16 to support up to 16 TWT stations
- Reject TWT flows for duplicated establishment
- Fix possib

wifi: mt76: mt7996: fix TWT issues

This patch fixes the following TWT issues:
- Change table_mask to u16 to support up to 16 TWT stations
- Reject TWT flows for duplicated establishment
- Fix possible unaligned pointer
- Remove unsupported TWT_CONTROL_WAKE_DUR_UNIT flag
- The minimum TWT duration supported by mt7996 chipsets is 64. Reply
with TWT_SETUP_CMD_DICTATE if the min_twt_dur is smaller than 64

Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

show more ...

wifi: mt76: mt7996: adjust interface num and wtbl size for mt7992

MT7992 chipsets support up to 32 interfaces (with maximum 19 per-band)
and 512 station entries.
This is a preliminary patch for mt79

wifi: mt76: mt7996: adjust interface num and wtbl size for mt7992

MT7992 chipsets support up to 32 interfaces (with maximum 19 per-band)
and 512 station entries.
This is a preliminary patch for mt7992 chipsets support.

Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

show more ...

wifi: mt76: mt7996: support mt7992 eeprom loading

Add the default eeprom and 0x7992 check to mt7996_check_eeprom().
This is a preliminary patch for mt7992 chipsets support.

Signed-off-by: StanleyYP

wifi: mt76: mt7996: support mt7992 eeprom loading

Add the default eeprom and 0x7992 check to mt7996_check_eeprom().
This is a preliminary patch for mt7992 chipsets support.

Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

show more ...

wifi: mt76: mt7996: add DMA support for mt7992

Add DMA TX/RX queues and RRO init flow for mt7992 chipsets.
This is a preliminary patch for mt7992 chipsets support.

Co-developed-by: StanleyYP Wang <

wifi: mt76: mt7996: add DMA support for mt7992

Add DMA TX/RX queues and RRO init flow for mt7992 chipsets.
This is a preliminary patch for mt7992 chipsets support.

Co-developed-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com>
Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com>
Co-developed-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Benjamin Lin <benjamin-jw.lin@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

show more ...

wifi: mt76: connac: add firmware support for mt7992

Support firmware download and enable related AFE PLL for mt7992 chipsets.
This is a preliminary patch for mt7992 chipsets support.

Co-developed-b

wifi: mt76: connac: add firmware support for mt7992

Support firmware download and enable related AFE PLL for mt7992 chipsets.
This is a preliminary patch for mt7992 chipsets support.

Co-developed-by: Benjamin Lin <benjamin-jw.lin@mediatek.com>
Signed-off-by: Benjamin Lin <benjamin-jw.lin@mediatek.com>
Co-developed-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

show more ...

wifi: mt76: mt7996: introduce mt7996_band_valid()

Replace dbdc_support and tbtc_support with mt7996_band_valid() to
support mt7996 variants with band0/band2 dual-band support.
This changes reduces a

wifi: mt76: mt7996: introduce mt7996_band_valid()

Replace dbdc_support and tbtc_support with mt7996_band_valid() to
support mt7996 variants with band0/band2 dual-band support.
This changes reduces ambiguity when checking supported bands on different
variants or new chipsets, as well as during the init configurations on
DMA TX/RX queues or irq masks.

Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

show more ...

wifi: mt76: connac: add beacon protection support for mt7996

Implement beacon protection feature for mt7996 chipsets, and also do
some cleanup on the set key routine.

Co-developed-by: Rudra Shahi <

wifi: mt76: connac: add beacon protection support for mt7996

Implement beacon protection feature for mt7996 chipsets, and also do
some cleanup on the set key routine.

Co-developed-by: Rudra Shahi <rudra.shahi@mediatek.com>
Signed-off-by: Rudra Shahi <rudra.shahi@mediatek.com>
Signed-off-by: Allen Ye <allen.ye@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

show more ...

wifi: mt76: mt7996: add txpower setting support

Add support for setting txpower from upper layer and configuring per-rate
txpower limit table.

Co-developed-by: Allen Ye <allen.ye@mediatek.com>
Sign

wifi: mt76: mt7996: add txpower setting support

Add support for setting txpower from upper layer and configuring per-rate
txpower limit table.

Co-developed-by: Allen Ye <allen.ye@mediatek.com>
Signed-off-by: Allen Ye <allen.ye@mediatek.com>
Co-developed-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com>
Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

show more ...

wifi: mt76: change txpower init to per-phy

Use per-phy structure for maximum txpower value initializing, since each
phy may have a different chainmask, which can impact the calculation of
power gain

wifi: mt76: change txpower init to per-phy

Use per-phy structure for maximum txpower value initializing, since each
phy may have a different chainmask, which can impact the calculation of
power gain.

Co-developed-by: Allen Ye <allen.ye@mediatek.com>
Signed-off-by: Allen Ye <allen.ye@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

show more ...

wifi: mt76: mt7996: handle IEEE80211_RC_SMPS_CHANGED

Make mt7996_mcu_set_fixed_field() non-static in order to handle
IEEE80211_RC_SMPS_CHANGED in mt7996_mac_sta_rc_work().

Signed-off-by: Peter Chiu

wifi: mt76: mt7996: handle IEEE80211_RC_SMPS_CHANGED

Make mt7996_mcu_set_fixed_field() non-static in order to handle
IEEE80211_RC_SMPS_CHANGED in mt7996_mac_sta_rc_work().

Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

show more ...

wifi: mt76: connac: add beacon duplicate TX mode support for mt7996

For connac3 chipsets, setting of spe_idx is moved from TX descriptor to
the fixed rate table. This patch implements the setting to

wifi: mt76: connac: add beacon duplicate TX mode support for mt7996

For connac3 chipsets, setting of spe_idx is moved from TX descriptor to
the fixed rate table. This patch implements the setting to support
duplicate TX mode for beacon.

Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

show more ...

wifi: mt76: connac: add thermal protection support for mt7996

Implement thermal protection commands and support Linux cooling device
control for mt7996 chipsets.

Signed-off-by: Howard Hsu <howard-y

wifi: mt76: connac: add thermal protection support for mt7996

Implement thermal protection commands and support Linux cooling device
control for mt7996 chipsets.

Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

show more ...

wifi: mt76: mt7996: add support for variants with auxiliary RX path

Add support to correctly configure the rx chainmask of variants that
have additional auxiliary RX path. e.g., 4T5R.
The auxiliary

wifi: mt76: mt7996: add support for variants with auxiliary RX path

Add support to correctly configure the rx chainmask of variants that
have additional auxiliary RX path. e.g., 4T5R.
The auxiliary RX path is transparent to driver, but driver needs to
correctly configure it in the set channel fw command.

Co-developed-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com>
Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

show more ...

wifi: mt76: mt7996: add wed rro delete session garbage collector

Introduce the capability to clear WED rro session configured in the hw
according to the event reported by the MCU firmware

Co-develo

wifi: mt76: mt7996: add wed rro delete session garbage collector

Introduce the capability to clear WED rro session configured in the hw
according to the event reported by the MCU firmware

Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Co-developed-by: Bo Jiao <Bo.Jiao@mediatek.com>
Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

show more ...

wifi: mt76: mt7996: add wed rx support

Similar to MT7915, enable Wireless Ethernet Ditpatcher for MT7996
to offload traffic received from the WLAN nic and transmitted on the
LAN one

Co-developed-by

wifi: mt76: mt7996: add wed rx support

Similar to MT7915, enable Wireless Ethernet Ditpatcher for MT7996
to offload traffic received from the WLAN nic and transmitted on the
LAN one

Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

show more ...

wifi: mt76: mt7996: use u16 for val field in mt7996_mcu_set_rro signature

This is a preliminary patch to introduce WED rx support for mt7996
driver.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.

wifi: mt76: mt7996: use u16 for val field in mt7996_mcu_set_rro signature

This is a preliminary patch to introduce WED rx support for mt7996
driver.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

show more ...

wifi: mt76: mt7996: add wed tx support

Similar to MT7915, enable Wireless Ethernet Ditpatcher for MT7996
to offload traffic received from the LAN nic and transmitted on the
WLAN one

Co-developed-by

wifi: mt76: mt7996: add wed tx support

Similar to MT7915, enable Wireless Ethernet Ditpatcher for MT7996
to offload traffic received from the LAN nic and transmitted on the
WLAN one

Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

show more ...

wifi: mt76: mt7996: remove periodic MPDU TXS request

Remove periodic MPDU TXS request. Get TID and FrameType from SKB
instead of TXWI, which is empty for Data Frame after MPDU TXS request
is removed

wifi: mt76: mt7996: remove periodic MPDU TXS request

Remove periodic MPDU TXS request. Get TID and FrameType from SKB
instead of TXWI, which is empty for Data Frame after MPDU TXS request
is removed, hence prohibiting the establishment of TX BA session.

Signed-off-by: Benjamin Lin <benjamin-jw.lin@mediatek.com>
Signed-off-by: Yi-Chia Hsieh <yi-chia.hsieh@mediatek.com>
Signed-off-by: Money Wang <Money.Wang@mediatek.com>
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Evelyn Tsai <evelyn.tsai@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

show more ...

wifi: mt76: mt7996: Add mcu commands for getting sta tx statistic

Per peer Tx/Rx statistic can only be obtained by querying WM when WED is
on. This patch switches to periodic event reporting in the

wifi: mt76: mt7996: Add mcu commands for getting sta tx statistic

Per peer Tx/Rx statistic can only be obtained by querying WM when WED is
on. This patch switches to periodic event reporting in the case of WED
being enabled.

Signed-off-by: Yi-Chia Hsieh <yi-chia.hsieh@mediatek.com>
Signed-off-by: Money Wang <Money.Wang@mediatek.com>
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Evelyn Tsai <evelyn.tsai@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

show more ...

wifi: mt76: mt76_connac3: move lmac queue enumeration in mt76_connac3_mac.h

This is a preliminary patch to introduce mt7925 chip support

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-

wifi: mt76: mt76_connac3: move lmac queue enumeration in mt76_connac3_mac.h

This is a preliminary patch to introduce mt7925 chip support

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

show more ...

wifi: mt76: move rate info in mt76_vif

This is a preliminary patch to introduce mt76_connac3 mac library used
by WiFi7 chipsets (e.g. mt7996).

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
S

wifi: mt76: move rate info in mt76_vif

This is a preliminary patch to introduce mt76_connac3 mac library used
by WiFi7 chipsets (e.g. mt7996).

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

show more ...