IB/mlx5: Expose XDR speed through MAD

Under MAD query port, Report NDR speed when NDR is supported in the port
capability mask.

Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Mark Zh

IB/mlx5: Expose XDR speed through MAD

Under MAD query port, Report NDR speed when NDR is supported in the port
capability mask.

Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Mark Zhang <markzhang@nvidia.com>
Link: https://lore.kernel.org/r/d30bdec2a66a8a2edd1d84ee61453c58cf346b43.1695204156.git.leon@kernel.org
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>

show more ...

IB/mlx5: Expose NDR speed through MAD

Under MAD query port, Report NDR speed when NDR is supported in the port
capability mask.

Link: https://lore.kernel.org/r/a2ab630d2a634547db9b581faa9d65da2edb9

IB/mlx5: Expose NDR speed through MAD

Under MAD query port, Report NDR speed when NDR is supported in the port
capability mask.

Link: https://lore.kernel.org/r/a2ab630d2a634547db9b581faa9d65da2edb9d05.1639554831.git.leonro@nvidia.com
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

show more ...

IB/cm: Simplify ib_cancel_mad() and ib_modify_mad() calls

The mad_agent parameter is redundant since the struct ib_mad_send_buf
already has a pointer of it.

Link: https://lore.kernel.org/r/0987c784

IB/cm: Simplify ib_cancel_mad() and ib_modify_mad() calls

The mad_agent parameter is redundant since the struct ib_mad_send_buf
already has a pointer of it.

Link: https://lore.kernel.org/r/0987c784b25f7bfa72f78691f50cff066de587e1.1622629024.git.leonro@nvidia.com
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

show more ...

RDMA: Support more than 255 rdma ports

Current code uses many different types when dealing with a port of a RDMA
device: u8, unsigned int and u32. Switch to u32 to clean up the logic.

This allows u

RDMA: Support more than 255 rdma ports

Current code uses many different types when dealing with a port of a RDMA
device: u8, unsigned int and u32. Switch to u32 to clean up the logic.

This allows us to make (at least) the core view consistent and use the
same type. Unfortunately not all places can be converted. Many uverbs
functions expect port to be u8 so keep those places in order not to break
UAPIs. HW/Spec defined values must also not be changed.

With the switch to u32 we now can support devices with more than 255
ports. U32_MAX is reserved to make control logic a bit easier to deal
with. As a device with U32_MAX ports probably isn't going to happen any
time soon this seems like a non issue.

When a device with more than 255 ports is created uverbs will report the
RDMA device as having 255 ports as this is the max currently supported.

The verbs interface is not changed yet because the IBTA spec limits the
port size in too many places to be u8 and all applications that relies in
verbs won't be able to cope with this change. At this stage, we are
extending the interfaces that are using vendor channel solely

Once the limitation is lifted mlx5 in switchdev mode will be able to have
thousands of SFs created by the device. As the only instance of an RDMA
device that reports more than 255 ports will be a representor device and
it exposes itself as a RAW Ethernet only device CM/MAD/IPoIB and other
ULPs aren't effected by this change and their sysfs/interfaces that are
exposes to userspace can remain unchanged.

While here cleanup some alignment issues and remove unneeded sanity
checks (mainly in rdmavt),

Link: https://lore.kernel.org/r/20210301070420.439400-1-leon@kernel.org
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

show more ...

RDMA/include: Replace license text with SPDX tags

The header files in RDMA subsystem are dual licensed and can be
described by simple SPDX tag, so replace all of them at once
together with making th

RDMA/include: Replace license text with SPDX tags

The header files in RDMA subsystem are dual licensed and can be
described by simple SPDX tag, so replace all of them at once
together with making them use the same coding style for header
guard defines.

Link: https://lore.kernel.org/r/20200719072521.135260-1-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

show more ...

RDMA/mad: Remove snoop interface

Snoop interface is not used. Remove it.

Link: https://lore.kernel.org/r/20200413132408.931084-1-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Si

RDMA/mad: Remove snoop interface

Snoop interface is not used. Remove it.

Link: https://lore.kernel.org/r/20200413132408.931084-1-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

show more ...

RDMA/mad: Delete never implemented functions

Delete never implemented and used MAD functions.

Link: https://lore.kernel.org/r/20191029062745.7932-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <l

RDMA/mad: Delete never implemented functions

Delete never implemented and used MAD functions.

Link: https://lore.kernel.org/r/20191029062745.7932-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

show more ...

RDMA: Use __packed annotation instead of __attribute__ ((packed))

"__attribute__" set of macros has been standardized, have became more
potentially portable and consistent code back in v2.6.21 by co

RDMA: Use __packed annotation instead of __attribute__ ((packed))

"__attribute__" set of macros has been standardized, have became more
potentially portable and consistent code back in v2.6.21 by commit
82ddcb040 ("[PATCH] extend the set of "__attribute__" shortcut macros").
Moreover, nowadays checkpatch.pl warns about using __attribute__((packed))
instead of __packed.

This patch converts all the "__attribute__ ((packed))" annotations to
"__packed" within the RDMA subsystem.

Signed-off-by: Erez Alfasi <ereza@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

show more ...

IB/core: Don't register each MAD agent for LSM notifier

When creating many MAD agents in a short period of time, receive packet
processing can be delayed long enough to cause timeouts while new agen

IB/core: Don't register each MAD agent for LSM notifier

When creating many MAD agents in a short period of time, receive packet
processing can be delayed long enough to cause timeouts while new agents
are being added to the atomic notifier chain with IRQs disabled. Notifier
chain registration and unregstration is an O(n) operation. With large
numbers of MAD agents being created and destroyed simultaneously the CPUs
spend too much time with interrupts disabled.

Instead of each MAD agent registering for it's own LSM notification,
maintain a list of agents internally and register once, this registration
already existed for handling the PKeys. This list is write mostly, so a
normal spin lock is used vs a read/write lock. All MAD agents must be
checked, so a single list is used instead of breaking them down per
device.

Notifier calls are done under rcu_read_lock, so there isn't a risk of
similar packet timeouts while checking the MAD agents security settings
when notified.

Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

show more ...

IB/core: Eliminate a hole in MAD agent struct

Move the security related fields above the u8s to eliminate a hole in the
struct.

pahole before:
struct ib_mad_agent {
...
u32 h

IB/core: Eliminate a hole in MAD agent struct

Move the security related fields above the u8s to eliminate a hole in the
struct.

pahole before:
struct ib_mad_agent {
...
u32 hi_tid; /* 48 4 */
u32 flags; /* 52 4 */
u8 port_num; /* 56 1 */
u8 rmpp_version; /* 57 1 */

/* XXX 6 bytes hole, try to pack */

/* --- cacheline 1 boundary (64 bytes) --- */
void * security; /* 64 8 */
bool smp_allowed; /* 72 1 */
bool lsm_nb_reg; /* 73 1 */

/* XXX 6 bytes hole, try to pack */

struct notifier_block lsm_nb; /* 80 24 */

/* XXX last struct has 4 bytes of padding */

/* size: 104, cachelines: 2, members: 14 */
...
};

pahole after:
struct ib_mad_agent {
...
u32 hi_tid; /* 48 4 */
u32 flags; /* 52 4 */
void * security; /* 56 8 */
/* --- cacheline 1 boundary (64 bytes) --- */
struct notifier_block lsm_nb; /* 64 24 */

/* XXX last struct has 4 bytes of padding */

u8 port_num; /* 88 1 */
u8 rmpp_version; /* 89 1 */
bool smp_allowed; /* 90 1 */
bool lsm_nb_reg; /* 91 1 */

/* size: 96, cachelines: 2, members: 14 */
...
};

Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

show more ...

IB/core: Add CapabilityMask2 to port attributes

CapabilityMask2 was added in IB Spec 1.3 under PortInfo attribute. The
new Capapbility mask is needed in order to expose the new 2X width and HDR
spe

IB/core: Add CapabilityMask2 to port attributes

CapabilityMask2 was added in IB Spec 1.3 under PortInfo attribute. The
new Capapbility mask is needed in order to expose the new 2X width and HDR
speed.

Signed-off-by: Michael Guralnik <michaelgur@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

show more ...

RDMA: Fix storage of PortInfo CapabilityMask in the kernel

The internal flag IP_BASED_GIDS was added to a field that was being used
to hold the port Info CapabilityMask without considering the effec

RDMA: Fix storage of PortInfo CapabilityMask in the kernel

The internal flag IP_BASED_GIDS was added to a field that was being used
to hold the port Info CapabilityMask without considering the effects this
will have. Since most drivers just use the value from the HW MAD it means
IP_BASED_GIDS will also become set on any HW that sets the IBA flag
IsOtherLocalChangesNoticeSupported - which is not intended.

Fix this by keeping port_cap_flags only for the IBA CapabilityMask value
and store unrelated flags externally. Move the bit definitions for this to
ib_mad.h to make it clear what is happening.

To keep the uAPI unchanged define a new set of flags in the uapi header
that are only used by ib_uverbs_query_port_resp.port_cap_flags which match
the current flags supported in rdma-core, and the values exposed by the
current kernel.

Fixes: b4a26a27287a ("IB: Report using RoCE IP based gids in port caps")
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>

show more ...

IB/core: Enforce security on management datagrams

Allocate and free a security context when creating and destroying a MAD
agent. This context is used for controlling access to PKeys and sending
and

IB/core: Enforce security on management datagrams

Allocate and free a security context when creating and destroying a MAD
agent. This context is used for controlling access to PKeys and sending
and receiving SMPs.

When sending or receiving a MAD check that the agent has permission to
access the PKey for the Subnet Prefix of the port.

During MAD and snoop agent registration for SMI QPs check that the
calling process has permission to access the manage the subnet and
register a callback with the LSM to be notified of policy changes. When
notificaiton of a policy change occurs recheck permission and set a flag
indicating sending and receiving SMPs is allowed.

When sending and receiving MADs check that the agent has access to the
SMI if it's on an SMI QP. Because security policy can change it's
possible permission was allowed when creating the agent, but no longer
is.

Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Acked-by: Doug Ledford <dledford@redhat.com>
[PM: remove the LSM hook init code]
Signed-off-by: Paul Moore <paul@paul-moore.com>

show more ...

IB/SA: Add support to query OPA path records

When the bit 26 of capmask2 field in OPA classport info
query is set, SA will query for OPA path records instead
of querying for IB path records. Note th

IB/SA: Add support to query OPA path records

When the bit 26 of capmask2 field in OPA classport info
query is set, SA will query for OPA path records instead
of querying for IB path records. Note that OPA
path records can only be queried by kernel ULPs.
Userspace clients continue to query IB path records.

Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

show more ...

IB/core: Move opa_class_port_info definition to header file

Both opa_vnic and the hfi driver use the same opa_classport_info
definition. We will also have ib_sa capable of querying opa class
port in

IB/core: Move opa_class_port_info definition to header file

Both opa_vnic and the hfi driver use the same opa_classport_info
definition. We will also have ib_sa capable of querying opa class
port info and would need this definition. Move it to ib_mad.h
for everyone to use.

Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

show more ...

IB/core: change the return type to void

The function ib_unregister_mad_agent always returns zero. And
this returned value is not checked. As such, chane the return
type to void.

CC: Joe Jin <joe.ji

IB/core: change the return type to void

The function ib_unregister_mad_agent always returns zero. And
this returned value is not checked. As such, chane the return
type to void.

CC: Joe Jin <joe.jin@oracle.com>
CC: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Hal Rosenstock <hal@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

show more ...

IB/mad: Eliminate redundant SM class version defines for OPA

and rename class version define to indicate SM rather than SMP or SMI

Signed-off-by: Hal Rosenstock <hal@mellanox.com>
Reviewed-by: Ira

IB/mad: Eliminate redundant SM class version defines for OPA

and rename class version define to indicate SM rather than SMP or SMI

Signed-off-by: Hal Rosenstock <hal@mellanox.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

show more ...

IB/core: Introduce capabilitymask2 field in ClassPortInfo mad

Change struct ib_class_port_info to conform to IB Spec 1.3
That in order to get specific capability mask from ClassPortInfo mad.

>From

IB/core: Introduce capabilitymask2 field in ClassPortInfo mad

Change struct ib_class_port_info to conform to IB Spec 1.3
That in order to get specific capability mask from ClassPortInfo mad.

>From the IB Spec, ClassPortInfo section:
"CapabilityMask2 Bits 0-26: Additional class-specific capabilities...
RespTimeValue the rest 5 bits"

The new struct now has one field for capabilitymask2 (previously was the
reserved field) and the resp_time field.

And it fixes up qib and srpt, use of the field repurposed to be used as
capabilitymask2:
IB/qib: Change pma_get_classportinfo
IB/srpt: Adjust the use of ib_class_port_info

Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Hal Rosenstock <hal@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

show more ...

IB/core: Documentation fix in the MAD header file

In ib_mad.h, ib_mad_snoop_handler uses send_buf rather than send_wr

Signed-off-by: Hal Rosenstock <hal@mellanox.com>
Reviewed-by: Ira Weiny <ira.we

IB/core: Documentation fix in the MAD header file

In ib_mad.h, ib_mad_snoop_handler uses send_buf rather than send_wr

Signed-off-by: Hal Rosenstock <hal@mellanox.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

show more ...

IB/mad: pass ib_mad_send_buf explicitly to the recv_handler

Stop abusing wr_id and just pass the parameter explicitly.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hal Rosenstock <hal

IB/mad: pass ib_mad_send_buf explicitly to the recv_handler

Stop abusing wr_id and just pass the parameter explicitly.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hal Rosenstock <hal@mellanox.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

show more ...

IB/mad: Require CM send method for everything except ClassPortInfo

Receipt of CM MAD with other than the Send method for an attribute
other than the ClassPortInfo attribute is invalid.

CM attribute

IB/mad: Require CM send method for everything except ClassPortInfo

Receipt of CM MAD with other than the Send method for an attribute
other than the ClassPortInfo attribute is invalid.

CM attributes other than ClassPortInfo only use the send method.

The SRP initiator does not maintain a timeout policy for CM connect
requests relies on the CM layer to do that. The result was that
the SRP initiator hung as the connect request never completed.

A new SRP target has been observed to respond to Send CM REQ
with GetResp of CM REQ with bad status. This is non conformant
with IBA spec but exposes a vulnerability in the current MAD/CM
code which will respond to the incoming GetResp of CM REQ as if
it was a valid incoming Send of CM REQ rather than tossing
this on the floor. It also causes the MAD layer not to
retransmit the original REQ even though it has not received a REP.

Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Hal Rosenstock <hal@mellanox.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

show more ...

IB/core: Move SM class defines from ib_mad.h to ib_smi.h

When the hfi1 driver was added these definitions were moved from the qib driver
to ib_mad.h to be used by both qib and hfi1. They should hav

IB/core: Move SM class defines from ib_mad.h to ib_smi.h

When the hfi1 driver was added these definitions were moved from the qib driver
to ib_mad.h to be used by both qib and hfi1. They should have been moved to
ib_smi.h instead.

Fixes: d4ab347005fb ("IB/core: Add core header changes needed for OPA")
Reviewed-by: Hal Rosenstock <hal@mellanox.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

show more ...

IB/core: Remove unnecessary defines from ib_mad.h

Remove the unused IB_NOTICE_REPRESS_* defines.

When the hfi1 driver was added these definitions were moved from the qib driver
to ib_mad.h. They s

IB/core: Remove unnecessary defines from ib_mad.h

Remove the unused IB_NOTICE_REPRESS_* defines.

When the hfi1 driver was added these definitions were moved from the qib driver
to ib_mad.h. They should have been removed instead.

Fixes: d4ab347005fb ("IB/core: Add core header changes needed for OPA")
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Hal Rosenstock <hal@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

show more ...

IB/mad: Remove ib_get_dma_mr calls

The pd now has a local_dma_lkey member which completely replaces
ib_get_dma_mr, use it instead.

Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
S

IB/mad: Remove ib_get_dma_mr calls

The pd now has a local_dma_lkey member which completely replaces
ib_get_dma_mr, use it instead.

Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

show more ...

IB/core: Add core header changes needed for OPA

This patch adds the value of the CNP opcode to the existing list of enumerated
opcodes in ib_pack.h

Add common OPA header definitions for driver
buil

IB/core: Add core header changes needed for OPA

This patch adds the value of the CNP opcode to the existing list of enumerated
opcodes in ib_pack.h

Add common OPA header definitions for driver
build:
- opa_port_info.h
- opa_smi.h
- hfi1_user.h

Additionally, ib_mad.h, has additional definitions
that are common to ib_drivers including:
- trap support
- cca support

The qib driver has the duplication removed in favor
those in ib_mad.h

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: John, Jubin <jubin.john@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

show more ...