Bluetooth: HCI: Remove HCI_AMP support

Since BT_HS has been remove HCI_AMP controllers no longer has any use so
remove it along with the capability of creating AMP controllers.

Since we no longer n

Bluetooth: HCI: Remove HCI_AMP support

Since BT_HS has been remove HCI_AMP controllers no longer has any use so
remove it along with the capability of creating AMP controllers.

Since we no longer need to differentiate between AMP and Primary
controllers, as only HCI_PRIMARY is left, this also remove
hdev->dev_type altogether.

Fixes: e7b02296fb40 ("Bluetooth: Remove BT_HS")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

show more ...

Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init()

l2cap_le_flowctl_init() can cause both div-by-zero and an integer
overflow since hdev->le_mtu may not fall in the valid range.

Move MTU

Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init()

l2cap_le_flowctl_init() can cause both div-by-zero and an integer
overflow since hdev->le_mtu may not fall in the valid range.

Move MTU from hci_dev to hci_conn to validate MTU and stop the connection
process earlier if MTU is invalid.
Also, add a missing validation in read_buffer_size() and make it return
an error value if the validation fails.
Now hci_conn_add() returns ERR_PTR() as it can fail due to the both a
kzalloc failure and invalid MTU value.

divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI
CPU: 0 PID: 67 Comm: kworker/u5:0 Tainted: G W 6.9.0-rc5+ #20
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Workqueue: hci0 hci_rx_work
RIP: 0010:l2cap_le_flowctl_init+0x19e/0x3f0 net/bluetooth/l2cap_core.c:547
Code: e8 17 17 0c 00 66 41 89 9f 84 00 00 00 bf 01 00 00 00 41 b8 02 00 00 00 4c
89 fe 4c 89 e2 89 d9 e8 27 17 0c 00 44 89 f0 31 d2 <66> f7 f3 89 c3 ff c3 4d 8d
b7 88 00 00 00 4c 89 f0 48 c1 e8 03 42
RSP: 0018:ffff88810bc0f858 EFLAGS: 00010246
RAX: 00000000000002a0 RBX: 0000000000000000 RCX: dffffc0000000000
RDX: 0000000000000000 RSI: ffff88810bc0f7c0 RDI: ffffc90002dcb66f
RBP: ffff88810bc0f880 R08: aa69db2dda70ff01 R09: 0000ffaaaaaaaaaa
R10: 0084000000ffaaaa R11: 0000000000000000 R12: ffff88810d65a084
R13: dffffc0000000000 R14: 00000000000002a0 R15: ffff88810d65a000
FS: 0000000000000000(0000) GS:ffff88811ac00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000100 CR3: 0000000103268003 CR4: 0000000000770ef0
PKRU: 55555554
Call Trace:
<TASK>
l2cap_le_connect_req net/bluetooth/l2cap_core.c:4902 [inline]
l2cap_le_sig_cmd net/bluetooth/l2cap_core.c:5420 [inline]
l2cap_le_sig_channel net/bluetooth/l2cap_core.c:5486 [inline]
l2cap_recv_frame+0xe59d/0x11710 net/bluetooth/l2cap_core.c:6809
l2cap_recv_acldata+0x544/0x10a0 net/bluetooth/l2cap_core.c:7506
hci_acldata_packet net/bluetooth/hci_core.c:3939 [inline]
hci_rx_work+0x5e5/0xb20 net/bluetooth/hci_core.c:4176
process_one_work kernel/workqueue.c:3254 [inline]
process_scheduled_works+0x90f/0x1530 kernel/workqueue.c:3335
worker_thread+0x926/0xe70 kernel/workqueue.c:3416
kthread+0x2e3/0x380 kernel/kthread.c:388
ret_from_fork+0x5c/0x90 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---

Fixes: 6ed58ec520ad ("Bluetooth: Use LE buffers for LE traffic")
Suggested-by: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Signed-off-by: Sungwoo Kim <iam@sung-woo.kim>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

show more ...

Bluetooth: hci_conn, hci_sync: Use __counted_by() to avoid -Wfamnae warnings

Prepare for the coming implementation by GCC and Clang of the
__counted_by attribute. Flexible array members annotated wi

Bluetooth: hci_conn, hci_sync: Use __counted_by() to avoid -Wfamnae warnings

Prepare for the coming implementation by GCC and Clang of the
__counted_by attribute. Flexible array members annotated with
__counted_by can have their accesses bounds-checked at run-time
via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE
(for strcpy/memcpy-family functions).

Also, -Wflex-array-member-not-at-end is coming in GCC-14, and we are
getting ready to enable it globally.

So, use the `DEFINE_FLEX()` helper for multiple on-stack definitions
of a flexible structure where the size of the flexible-array member
is known at compile-time, and refactor the rest of the code,
accordingly.

Notice that, due to the use of `__counted_by()` in `struct
hci_cp_le_create_cis`, the for loop in function `hci_cs_le_create_cis()`
had to be modified. Once the index `i`, through which `cp->cis[i]` is
accessed, falls in the interval [0, cp->num_cis), `cp->num_cis` cannot
be decremented all the way down to zero while accessing `cp->cis[]`:

net/bluetooth/hci_event.c:4310:
4310 for (i = 0; cp->num_cis; cp->num_cis--, i++) {
...
4314 handle = __le16_to_cpu(cp->cis[i].cis_handle);

otherwise, only half (one iteration before `cp->num_cis == i`) or half
plus one (one iteration before `cp->num_cis < i`) of the items in the
array will be accessed before running into an out-of-bounds issue. So,
in order to avoid this, set `cp->num_cis` to zero just after the for
loop.

Also, make use of `aux_num_cis` variable to update `cmd->num_cis` after
a `list_for_each_entry_rcu()` loop.

With these changes, fix the following warnings:
net/bluetooth/hci_sync.c:1239:56: warning: structure containing a flexible
array member is not at the end of another structure
[-Wflex-array-member-not-at-end]
net/bluetooth/hci_sync.c:1415:51: warning: structure containing a flexible
array member is not at the end of another structure
[-Wflex-array-member-not-at-end]
net/bluetooth/hci_sync.c:1731:51: warning: structure containing a flexible
array member is not at the end of another structure
[-Wflex-array-member-not-at-end]
net/bluetooth/hci_sync.c:6497:45: warning: structure containing a flexible
array member is not at the end of another structure
[-Wflex-array-member-not-at-end]

Link: https://github.com/KSPP/linux/issues/202
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

show more ...

Bluetooth: ISO: Handle PA sync when no BIGInfo reports are generated

In case of a Broadcast Source that has PA enabled but no active BIG,
a Broadcast Sink needs to establish PA sync and parse BASE f

Bluetooth: ISO: Handle PA sync when no BIGInfo reports are generated

In case of a Broadcast Source that has PA enabled but no active BIG,
a Broadcast Sink needs to establish PA sync and parse BASE from PA
reports.

This commit moves the allocation of a PA sync hcon from the BIGInfo
advertising report event to the PA sync established event. After the
first complete PA report, the hcon is notified to the ISO layer. A
child socket is allocated and enqueued in the parent's accept queue.

BIGInfo reports also need to be processed, to extract the encryption
field and inform userspace. After the first BIGInfo report is received,
the PA sync hcon is notified again to the ISO layer. Since a socket will
be found this time, the socket state will transition to BT_CONNECTED and
the userspace will be woken up using sk_state_change.

Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

show more ...

Bluetooth: hci_event: Set DISCOVERY_FINDING on SCAN_ENABLED

This makes sure that discovery state is properly synchronized otherwise
reports may not generate MGMT DeviceFound events as it would be as

Bluetooth: hci_event: Set DISCOVERY_FINDING on SCAN_ENABLED

This makes sure that discovery state is properly synchronized otherwise
reports may not generate MGMT DeviceFound events as it would be assumed
that it was not initiated by a discovery session.

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

show more ...

Bluetooth: HCI: Fix potential null-ptr-deref

Fix potential null-ptr-deref in hci_le_big_sync_established_evt().

Fixes: f777d8827817 (Bluetooth: ISO: Notify user space about failed bis connections)

Bluetooth: HCI: Fix potential null-ptr-deref

Fix potential null-ptr-deref in hci_le_big_sync_established_evt().

Fixes: f777d8827817 (Bluetooth: ISO: Notify user space about failed bis connections)
Signed-off-by: Sungwoo Kim <iam@sung-woo.kim>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

show more ...

Bluetooth: hci_event: Fix sending HCI_OP_READ_ENC_KEY_SIZE

The code shall always check if HCI_QUIRK_BROKEN_READ_ENC_KEY_SIZE has
been set before attempting to use HCI_OP_READ_ENC_KEY_SIZE.

Fixes: c

Bluetooth: hci_event: Fix sending HCI_OP_READ_ENC_KEY_SIZE

The code shall always check if HCI_QUIRK_BROKEN_READ_ENC_KEY_SIZE has
been set before attempting to use HCI_OP_READ_ENC_KEY_SIZE.

Fixes: c569242cd492 ("Bluetooth: hci_event: set the conn encrypted before conn establishes")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

show more ...

Bluetooth: hci_sync: Use advertised PHYs on hci_le_ext_create_conn_sync

The extended advertising reports do report the PHYs so this store then
in hci_conn so it can be later used in hci_le_ext_creat

Bluetooth: hci_sync: Use advertised PHYs on hci_le_ext_create_conn_sync

The extended advertising reports do report the PHYs so this store then
in hci_conn so it can be later used in hci_le_ext_create_conn_sync to
narrow the PHYs to be scanned since the controller will also perform a
scan having a smaller set of PHYs shall reduce the time it takes to
find and connect peers.

Fixes: 288c90224eec ("Bluetooth: Enable all supported LE PHY by default")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

show more ...

Bluetooth: hci_event: set the conn encrypted before conn establishes

We have a BT headset (Lenovo Thinkplus XT99), the pairing and
connecting has no problem, once this headset is paired, bluez will

Bluetooth: hci_event: set the conn encrypted before conn establishes

We have a BT headset (Lenovo Thinkplus XT99), the pairing and
connecting has no problem, once this headset is paired, bluez will
remember this device and will auto re-connect it whenever the device
is powered on. The auto re-connecting works well with Windows and
Android, but with Linux, it always fails. Through debugging, we found
at the rfcomm connection stage, the bluetooth stack reports
"Connection refused - security block (0x0003)".

For this device, the re-connecting negotiation process is different
from other BT headsets, it sends the Link_KEY_REQUEST command before
the CONNECT_REQUEST completes, and it doesn't send ENCRYPT_CHANGE
command during the negotiation. When the device sends the "connect
complete" to hci, the ev->encr_mode is 1.

So here in the conn_complete_evt(), if ev->encr_mode is 1, link type
is ACL and HCI_CONN_ENCRYPT is not set, we set HCI_CONN_ENCRYPT to
this conn, and update conn->enc_key_size accordingly.

After this change, this BT headset could re-connect with Linux
successfully. This is the btmon log after applying the patch, after
receiving the "Connect Complete" with "Encryption: Enabled", will send
the command to read encryption key size:
> HCI Event: Connect Request (0x04) plen 10
Address: 8C:3C:AA:D8:11:67 (OUI 8C-3C-AA)
Class: 0x240404
Major class: Audio/Video (headset, speaker, stereo, video, vcr)
Minor class: Wearable Headset Device
Rendering (Printing, Speaker)
Audio (Speaker, Microphone, Headset)
Link type: ACL (0x01)
...
> HCI Event: Link Key Request (0x17) plen 6
Address: 8C:3C:AA:D8:11:67 (OUI 8C-3C-AA)
< HCI Command: Link Key Request Reply (0x01|0x000b) plen 22
Address: 8C:3C:AA:D8:11:67 (OUI 8C-3C-AA)
Link key: ${32-hex-digits-key}
...
> HCI Event: Connect Complete (0x03) plen 11
Status: Success (0x00)
Handle: 256
Address: 8C:3C:AA:D8:11:67 (OUI 8C-3C-AA)
Link type: ACL (0x01)
Encryption: Enabled (0x01)
< HCI Command: Read Encryption Key... (0x05|0x0008) plen 2
Handle: 256
< ACL Data TX: Handle 256 flags 0x00 dlen 10
L2CAP: Information Request (0x0a) ident 1 len 2
Type: Extended features supported (0x0002)
> HCI Event: Command Complete (0x0e) plen 7
Read Encryption Key Size (0x05|0x0008) ncmd 1
Status: Success (0x00)
Handle: 256
Key size: 16

Cc: stable@vger.kernel.org
Link: https://github.com/bluez/bluez/issues/704
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

show more ...

Bluetooth: Add new quirk for broken read key length on ATS2851

The ATS2851 controller erroneously reports support for the "Read
Encryption Key Length" HCI command. This makes it unable to connect
to

Bluetooth: Add new quirk for broken read key length on ATS2851

The ATS2851 controller erroneously reports support for the "Read
Encryption Key Length" HCI command. This makes it unable to connect
to any devices, since this command is issued by the kernel during the
connection process in response to an "Encryption Change" HCI event.

Add a new quirk (HCI_QUIRK_BROKEN_ENC_KEY_SIZE) to hint that the command
is unsupported, preventing it from interrupting the connection process.

This is the error log from btmon before this patch:

> HCI Event: Encryption Change (0x08) plen 4
Status: Success (0x00)
Handle: 2048 Address: ...
Encryption: Enabled with E0 (0x01)
< HCI Command: Read Encryption Key Size (0x05|0x0008) plen 2
Handle: 2048 Address: ...
> HCI Event: Command Status (0x0f) plen 4
Read Encryption Key Size (0x05|0x0008) ncmd 1
Status: Unknown HCI Command (0x01)

Signed-off-by: Vinicius Peixoto <nukelet64@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

show more ...

Bluetooth: hci_sync: Fix overwriting request callback

In a few cases the stack may generate commands as responses to events
which would happen to overwrite the sent_cmd, so this attempts to store
th

Bluetooth: hci_sync: Fix overwriting request callback

In a few cases the stack may generate commands as responses to events
which would happen to overwrite the sent_cmd, so this attempts to store
the request in req_skb so even if sent_cmd is replaced with a new
command the pending request will remain in stored in req_skb.

Fixes: 6a98e3836fa2 ("Bluetooth: Add helper for serialized HCI command execution")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

show more ...

Bluetooth: hci_event: Remove code to removed CONFIG_BT_HS

Commit cec9f3c5561d ("Bluetooth: Remove BT_HS") removes config BT_HS, but
misses two "ifdef BT_HS" blocks in hci_event.c.

Remove this dead

Bluetooth: hci_event: Remove code to removed CONFIG_BT_HS

Commit cec9f3c5561d ("Bluetooth: Remove BT_HS") removes config BT_HS, but
misses two "ifdef BT_HS" blocks in hci_event.c.

Remove this dead code from this removed config option.

Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

show more ...

Bluetooth: Remove pending ACL connection attempts

With the last commit we moved to using the hci_sync queue for "Create
Connection" requests, removing the need for retrying the paging after
finished

Bluetooth: Remove pending ACL connection attempts

With the last commit we moved to using the hci_sync queue for "Create
Connection" requests, removing the need for retrying the paging after
finished/failed "Create Connection" requests and after the end of
inquiries.

hci_conn_check_pending() was used to trigger this retry, we can remove it
now.

Note that we can also remove the special handling for COMMAND_DISALLOWED
errors in the completion handler of "Create Connection", because "Create
Connection" requests are now always serialized.

This is somewhat reverting commit 4c67bc74f016 ("[Bluetooth] Support
concurrent connect requests").

With this, the BT_CONNECT2 state of ACL hci_conn objects should now be
back to meaning only one thing: That we received a "Connection Request"
from another device (see hci_conn_request_evt), but the response to that
is going to be deferred.

Signed-off-by: Jonas Dreßler <verdre@v0yd.nl>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

show more ...

Bluetooth: hci_event: Fix not indicating new connection for BIG Sync

BIG Sync (aka. Broadcast sink) requires to inform that the device is
connected when a data path is active otherwise userspace cou

Bluetooth: hci_event: Fix not indicating new connection for BIG Sync

BIG Sync (aka. Broadcast sink) requires to inform that the device is
connected when a data path is active otherwise userspace could attempt
to free resources allocated to the device object while scanning.

Fixes: 1d11d70d1f6b ("Bluetooth: ISO: Pass BIG encryption info through QoS")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

show more ...

Bluetooth: Remove BT_HS

High Speed, Alternate MAC and PHY (AMP) extension, has been removed from
Bluetooth Core specification on 5.3:

https://www.bluetooth.com/blog/new-core-specification-v5-3-feat

Bluetooth: Remove BT_HS

High Speed, Alternate MAC and PHY (AMP) extension, has been removed from
Bluetooth Core specification on 5.3:

https://www.bluetooth.com/blog/new-core-specification-v5-3-feature-enhancements/

Fixes: 244bc377591c ("Bluetooth: Add BT_HS config option")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

show more ...

Bluetooth: hci_event: Use HCI error defines instead of magic values

We have error defines already, so let's use them.

Signed-off-by: Jonas Dreßler <verdre@v0yd.nl>
Signed-off-by: Luiz Augusto von D

Bluetooth: hci_event: Use HCI error defines instead of magic values

We have error defines already, so let's use them.

Signed-off-by: Jonas Dreßler <verdre@v0yd.nl>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

show more ...

Bluetooth: Remove superfluous call to hci_conn_check_pending()

The "pending connections" feature was originally introduced with commit
4c67bc74f016 ("[Bluetooth] Support concurrent connect requests"

Bluetooth: Remove superfluous call to hci_conn_check_pending()

The "pending connections" feature was originally introduced with commit
4c67bc74f016 ("[Bluetooth] Support concurrent connect requests") and
6bd57416127e ("[Bluetooth] Handling pending connect attempts after
inquiry") to handle controllers supporting only a single connection request
at a time. Later things were extended to also cancel ongoing inquiries on
connect() with commit 89e65975fea5 ("Bluetooth: Cancel Inquiry before
Create Connection").

With commit a9de9248064b ("[Bluetooth] Switch from OGF+OCF to using only
opcodes"), hci_conn_check_pending() was introduced as a helper to
consolidate a few places where we check for pending connections (indicated
by the BT_CONNECT2 flag) and then try to connect.

This refactoring commit also snuck in two more calls to
hci_conn_check_pending():

- One is in the failure callback of hci_cs_inquiry(), this one probably
makes sense: If we send an "HCI Inquiry" command and then immediately
after a "Create Connection" command, the "Create Connection" command might
fail before the "HCI Inquiry" command, and then we want to retry the
"Create Connection" on failure of the "HCI Inquiry".

- The other added call to hci_conn_check_pending() is in the event handler
for the "Remote Name" event, this seems unrelated and is possibly a
copy-paste error, so remove that one.

Fixes: a9de9248064b ("[Bluetooth] Switch from OGF+OCF to using only opcodes")
Signed-off-by: Jonas Dreßler <verdre@v0yd.nl>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

show more ...

Bluetooth: Enforce validation on max value of connection interval

Right now Linux BT stack cannot pass test case "GAP/CONN/CPUP/BV-05-C
'Connection Parameter Update Procedure Invalid Parameters Cent

Bluetooth: Enforce validation on max value of connection interval

Right now Linux BT stack cannot pass test case "GAP/CONN/CPUP/BV-05-C
'Connection Parameter Update Procedure Invalid Parameters Central
Responder'" in Bluetooth Test Suite revision GAP.TS.p44. [0]

That was revoled by commit c49a8682fc5d ("Bluetooth: validate BLE
connection interval updates"), but later got reverted due to devices
like keyboards and mice may require low connection interval.

So only validate the max value connection interval to pass the Test
Suite, and let devices to request low connection interval if needed.

[0] https://www.bluetooth.org/docman/handlers/DownloadDoc.ashx?doc_id=229869

Fixes: 68d19d7d9957 ("Revert "Bluetooth: validate BLE connection interval updates"")
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

show more ...

Bluetooth: hci_event: Fix handling of HCI_EV_IO_CAPA_REQUEST

If we received HCI_EV_IO_CAPA_REQUEST while
HCI_OP_READ_REMOTE_EXT_FEATURES is yet to be responded assume the remote
does support SSP sin

Bluetooth: hci_event: Fix handling of HCI_EV_IO_CAPA_REQUEST

If we received HCI_EV_IO_CAPA_REQUEST while
HCI_OP_READ_REMOTE_EXT_FEATURES is yet to be responded assume the remote
does support SSP since otherwise this event shouldn't be generated.

Link: https://lore.kernel.org/linux-bluetooth/CABBYNZ+9UdG1cMZVmdtN3U2aS16AKMCyTARZZyFX7xTEDWcMOw@mail.gmail.com/T/#t
Fixes: c7f59461f5a7 ("Bluetooth: Fix a refcnt underflow problem for hci_conn")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

show more ...

Bluetooth: hci_event: Fix wrongly recorded wakeup BD_ADDR

hci_store_wake_reason() wrongly parses event HCI_Connection_Request
as HCI_Connection_Complete and HCI_Connection_Complete as
HCI_Connection

Bluetooth: hci_event: Fix wrongly recorded wakeup BD_ADDR

hci_store_wake_reason() wrongly parses event HCI_Connection_Request
as HCI_Connection_Complete and HCI_Connection_Complete as
HCI_Connection_Request, so causes recording wakeup BD_ADDR error and
potential stability issue, fix it by using the correct field.

Fixes: 2f20216c1d6f ("Bluetooth: Emit controller suspend and resume events")
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

show more ...

Bluetooth: Fix bogus check for re-auth no supported with non-ssp

This reverts 19f8def031bfa50c579149b200bfeeb919727b27
"Bluetooth: Fix auth_complete_evt for legacy units" which seems to be
working a

Bluetooth: Fix bogus check for re-auth no supported with non-ssp

This reverts 19f8def031bfa50c579149b200bfeeb919727b27
"Bluetooth: Fix auth_complete_evt for legacy units" which seems to be
working around a bug on a broken controller rather then any limitation
imposed by the Bluetooth spec, in fact if there ws not possible to
re-auth the command shall fail not succeed.

Fixes: 19f8def031bf ("Bluetooth: Fix auth_complete_evt for legacy units")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

show more ...

Bluetooth: Add more enc key size check

When we are slave role and receives l2cap conn req when encryption has
started, we should check the enc key size to avoid KNOB attack or BLUFFS
attack.
From SI

Bluetooth: Add more enc key size check

When we are slave role and receives l2cap conn req when encryption has
started, we should check the enc key size to avoid KNOB attack or BLUFFS
attack.
From SIG recommendation, implementations are advised to reject
service-level connections on an encrypted baseband link with key
strengths below 7 octets.
A simple and clear way to achieve this is to place the enc key size
check in hci_cc_read_enc_key_size()

The btmon log below shows the case that lacks enc key size check.

> HCI Event: Connect Request (0x04) plen 10
Address: BB:22:33:44:55:99 (OUI BB-22-33)
Class: 0x480104
Major class: Computer (desktop, notebook, PDA, organizers)
Minor class: Desktop workstation
Capturing (Scanner, Microphone)
Telephony (Cordless telephony, Modem, Headset)
Link type: ACL (0x01)
< HCI Command: Accept Connection Request (0x01|0x0009) plen 7
Address: BB:22:33:44:55:99 (OUI BB-22-33)
Role: Peripheral (0x01)
> HCI Event: Command Status (0x0f) plen 4
Accept Connection Request (0x01|0x0009) ncmd 2
Status: Success (0x00)
> HCI Event: Connect Complete (0x03) plen 11
Status: Success (0x00)
Handle: 1
Address: BB:22:33:44:55:99 (OUI BB-22-33)
Link type: ACL (0x01)
Encryption: Disabled (0x00)
...

> HCI Event: Encryption Change (0x08) plen 4
Status: Success (0x00)
Handle: 1 Address: BB:22:33:44:55:99 (OUI BB-22-33)
Encryption: Enabled with E0 (0x01)
< HCI Command: Read Encryption Key Size (0x05|0x0008) plen 2
Handle: 1 Address: BB:22:33:44:55:99 (OUI BB-22-33)
> HCI Event: Command Complete (0x0e) plen 7
Read Encryption Key Size (0x05|0x0008) ncmd 2
Status: Success (0x00)
Handle: 1 Address: BB:22:33:44:55:99 (OUI BB-22-33)
Key size: 6
// We should check the enc key size
...

> ACL Data RX: Handle 1 flags 0x02 dlen 12
L2CAP: Connection Request (0x02) ident 3 len 4
PSM: 25 (0x0019)
Source CID: 64
< ACL Data TX: Handle 1 flags 0x00 dlen 16
L2CAP: Connection Response (0x03) ident 3 len 8
Destination CID: 64
Source CID: 64
Result: Connection pending (0x0001)
Status: Authorization pending (0x0002)
> HCI Event: Number of Completed Packets (0x13) plen 5
Num handles: 1
Handle: 1 Address: BB:22:33:44:55:99 (OUI BB-22-33)
Count: 1
#35: len 16 (25 Kb/s)
Latency: 5 msec (2-7 msec ~4 msec)
< ACL Data TX: Handle 1 flags 0x00 dlen 16
L2CAP: Connection Response (0x03) ident 3 len 8
Destination CID: 64
Source CID: 64
Result: Connection successful (0x0000)
Status: No further information available (0x0000)

Cc: stable@vger.kernel.org
Signed-off-by: Alex Lu <alex_lu@realsil.com.cn>
Signed-off-by: Max Chou <max.chou@realtek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

show more ...

Bluetooth: hci_event: shut up a false-positive warning

Turning on -Wstringop-overflow globally exposed a misleading compiler
warning in bluetooth:

net/bluetooth/hci_event.c: In function 'hci_cc_rea

Bluetooth: hci_event: shut up a false-positive warning

Turning on -Wstringop-overflow globally exposed a misleading compiler
warning in bluetooth:

net/bluetooth/hci_event.c: In function 'hci_cc_read_class_of_dev':
net/bluetooth/hci_event.c:524:9: error: 'memcpy' writing 3 bytes into a
region of size 0 overflows the destination [-Werror=stringop-overflow=]
524 | memcpy(hdev->dev_class, rp->dev_class, 3);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

The problem here is the check for hdev being NULL in bt_dev_dbg() that
leads the compiler to conclude that hdev->dev_class might be an invalid
pointer access.

Add another explicit check for the same condition to make sure gcc sees
this cannot happen.

Fixes: a9de9248064b ("[Bluetooth] Switch from OGF+OCF to using only opcodes")
Fixes: 1b56c90018f0 ("Makefile: Enable -Wstringop-overflow globally")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

show more ...

Bluetooth: hci_event: Fix not checking if HCI_OP_INQUIRY has been sent

Before setting HCI_INQUIRY bit check if HCI_OP_INQUIRY was really sent
otherwise the controller maybe be generating invalid eve

Bluetooth: hci_event: Fix not checking if HCI_OP_INQUIRY has been sent

Before setting HCI_INQUIRY bit check if HCI_OP_INQUIRY was really sent
otherwise the controller maybe be generating invalid events or, more
likely, it is a result of fuzzing tools attempting to test the right
behavior of the stack when unexpected events are generated.

Cc: stable@vger.kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218151
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

show more ...

Bluetooth: Fix not notifying when connection encryption changes

Some layers such as SMP depend on getting notified about encryption
changes immediately as they only allow certain PDU to be transmitt

Bluetooth: Fix not notifying when connection encryption changes

Some layers such as SMP depend on getting notified about encryption
changes immediately as they only allow certain PDU to be transmitted
over an encrypted link which may cause SMP implementation to reject
valid PDUs received thus causing pairing to fail when it shouldn't.

Fixes: 7aca0ac4792e ("Bluetooth: Wait for HCI_OP_WRITE_AUTH_PAYLOAD_TO to complete")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

show more ...