selftests: mptcp: join: check backup support in signal endp

Before the previous commit, 'signal' endpoints with the 'backup' flag
were ignored when sending the MP_JOIN.

The MPTCP Join selftest has

selftests: mptcp: join: check backup support in signal endp

Before the previous commit, 'signal' endpoints with the 'backup' flag
were ignored when sending the MP_JOIN.

The MPTCP Join selftest has then been modified to validate this case:
the "single address, backup" test, is now validating the MP_JOIN with a
backup flag as it is what we expect it to do with such name. The
previous version has been kept, but renamed to "single address, switch
to backup" to avoid confusions.

The "single address with port, backup" test is also now validating the
MPJ with a backup flag, which makes more sense than checking the switch
to backup with an MP_PRIO.

The "mpc backup both sides" test is now validating that the backup flag
is also set in MP_JOIN from and to the addresses used in the initial
subflow, using the special ID 0.

The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.

Fixes: 4596a2c1b7f5 ("mptcp: allow creating non-backup subflows")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

show more ...

selftests: mptcp: join: validate backup in MPJ

A peer can notify the other one that a subflow has to be treated as
"backup" by two different ways: either by sending a dedicated MP_PRIO
notification,

selftests: mptcp: join: validate backup in MPJ

A peer can notify the other one that a subflow has to be treated as
"backup" by two different ways: either by sending a dedicated MP_PRIO
notification, or by setting the backup flag in the MP_JOIN handshake.

The selftests were previously monitoring the former, but not the latter.
This is what is now done here by looking at these new MIB counters when
validating the 'backup' cases:

MPTcpExtMPJoinSynBackupRx
MPTcpExtMPJoinSynAckBackupRx

The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it will help to validate a new fix for an issue introduced by this
commit ID.

Fixes: 4596a2c1b7f5 ("mptcp: allow creating non-backup subflows")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

show more ...

selftests: mptcp: fix error path

pm_nl_check_endpoint() currently calls an not existing helper
to mark the test as failed. Fix the wrong call.

Fixes: 03668c65d153 ("selftests: mptcp: join: rework d

selftests: mptcp: fix error path

pm_nl_check_endpoint() currently calls an not existing helper
to mark the test as failed. Fix the wrong call.

Fixes: 03668c65d153 ("selftests: mptcp: join: rework detailed report")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

selftests: mptcp: add explicit test case for remove/readd

Delete and re-create a signal endpoint and ensure that the PM
actually deletes and re-create the subflow.

Signed-off-by: Paolo Abeni <paben

selftests: mptcp: add explicit test case for remove/readd

Delete and re-create a signal endpoint and ensure that the PM
actually deletes and re-create the subflow.

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

mptcp: pm: update add_addr counters after connect

The creation of new subflows can fail for different reasons. If no
subflow have been created using the received ADD_ADDR, the related
counters shoul

mptcp: pm: update add_addr counters after connect

The creation of new subflows can fail for different reasons. If no
subflow have been created using the received ADD_ADDR, the related
counters should not be updated, otherwise they will never be decremented
for events related to this ID later on.

For the moment, the number of accepted ADD_ADDR is only decremented upon
the reception of a related RM_ADDR, and only if the remote address ID is
currently being used by at least one subflow. In other words, if no
subflow can be created with the received address, the counter will not
be decremented. In this case, it is then important not to increment
pm.add_addr_accepted counter, and not to modify pm.accept_addr bit.

Note that this patch does not modify the behaviour in case of failures
later on, e.g. if the MP Join is dropped or rejected.

The "remove invalid addresses" MP Join subtest has been modified to
validate this case. The broadcast IP address is added before the "valid"
address that will be used to successfully create a subflow, and the
limit is decreased by one: without this patch, it was not possible to
create the last subflow, because:

- the broadcast address would have been accepted even if it was not
usable: the creation of a subflow to this address results in an error,

- the limit of 2 accepted ADD_ADDR would have then been reached.

Fixes: 01cacb00b35c ("mptcp: add netlink-based PM")
Cc: stable@vger.kernel.org
Co-developed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: YonglongLi <liyonglong@chinatelecom.cn>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240607-upstream-net-20240607-misc-fixes-v1-3-1ab9ddfa3d00@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

mptcp: pm: inc RmAddr MIB counter once per RM_ADDR ID

The RmAddr MIB counter is supposed to be incremented once when a valid
RM_ADDR has been received. Before this patch, it could have been
incremen

mptcp: pm: inc RmAddr MIB counter once per RM_ADDR ID

The RmAddr MIB counter is supposed to be incremented once when a valid
RM_ADDR has been received. Before this patch, it could have been
incremented as many times as the number of subflows connected to the
linked address ID, so it could have been 0, 1 or more than 1.

The "RmSubflow" is incremented after a local operation. In this case,
it is normal to tied it with the number of subflows that have been
actually removed.

The "remove invalid addresses" MP Join subtest has been modified to
validate this case. A broadcast IP address is now used instead: the
client will not be able to create a subflow to this address. The
consequence is that when receiving the RM_ADDR with the ID attached to
this broadcast IP address, no subflow linked to this ID will be found.

Fixes: 7a7e52e38a40 ("mptcp: add RM_ADDR related mibs")
Cc: stable@vger.kernel.org
Co-developed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: YonglongLi <liyonglong@chinatelecom.cn>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240607-upstream-net-20240607-misc-fixes-v1-2-1ab9ddfa3d00@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

selftests: mptcp: join: mark 'fail' tests as flaky

These tests are rarely unstable. It depends on the CI running the tests,
especially if it is also busy doing other tasks in parallel, and if a
debu

selftests: mptcp: join: mark 'fail' tests as flaky

These tests are rarely unstable. It depends on the CI running the tests,
especially if it is also busy doing other tasks in parallel, and if a
debug kernel config is being used.

It looks like this issue is sometimes present with the NetDev CI. While
this is being investigated, the tests are marked as flaky not to create
noises on such CIs.

Fixes: b6e074e171bc ("selftests: mptcp: add infinite map testcase")
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/491
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240524-upstream-net-20240524-selftests-mptcp-flaky-v1-4-a352362f3f8e@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

selftests: mptcp: join: mark 'fastclose' tests as flaky

These tests are flaky since their introduction. This might be less or
not visible depending on the CI running the tests, especially if it is
a

selftests: mptcp: join: mark 'fastclose' tests as flaky

These tests are flaky since their introduction. This might be less or
not visible depending on the CI running the tests, especially if it is
also busy doing other tasks in parallel, and if a debug kernel config is
being used.

It looks like this issue is often present with the NetDev CI. While this
is being investigated, the tests are marked as flaky not to create
noises on such CIs.

Fixes: 01542c9bf9ab ("selftests: mptcp: add fastclose testcase")
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/324
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240524-upstream-net-20240524-selftests-mptcp-flaky-v1-3-a352362f3f8e@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

selftests: mptcp: export pm_nl endpoint ops

This patch exports six endpoint operation helpers with pm_nl_ prefix,
pm_nl_set_limits(), pm_nl_add_endpoint(), pm_nl_del_endpoint(),
pm_nl_flush_endpoint

selftests: mptcp: export pm_nl endpoint ops

This patch exports six endpoint operation helpers with pm_nl_ prefix,
pm_nl_set_limits(), pm_nl_add_endpoint(), pm_nl_del_endpoint(),
pm_nl_flush_endpoint(), pm_nl_show_endpoints() and pm_nl_change_endpoint()
into mptcp_lib.sh as public functions, and renamed each of them with a
mptcp_lib_ prefix. Then these old pm_nl_ prefix helpers in mptcp_join.sh
can be wrappers of mptcp_lib_ prefix ones.

Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

selftests: mptcp: join: update endpoint ops

This patch uses 'case' statements to simplify pm_nl_add_endpoint() and
pm_nl_check_endpoint(). And simplify pm_nl_check_endpoint() with
check_output() hel

selftests: mptcp: join: update endpoint ops

This patch uses 'case' statements to simplify pm_nl_add_endpoint() and
pm_nl_check_endpoint(). And simplify pm_nl_check_endpoint() with
check_output() helper. Also update pm_nl_del_endpoint() to avoid the
'double quote' shellcheck warning.

Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

selftests: mptcp: add {get,format}_endpoint(s) helpers

The output formats of 'ip mptcp' commands are much different from that
of 'pm_nl_ctl' commands.

This patch adds a new helper format_endpoints(

selftests: mptcp: add {get,format}_endpoint(s) helpers

The output formats of 'ip mptcp' commands are much different from that
of 'pm_nl_ctl' commands.

This patch adds a new helper format_endpoints() to format the outputs of
'ip mptcp' and 'pm_nl_ctl' with 'endpoints' arguments to hide these
differences.

A new helper named get_endpoint() has also been added to show a specific
endpoint identified by the given address ID, similar to mptcp_join.sh's
pm_nl_show_endpoints() helper, but showing all entries.

Use these two helpers in mptcp_join.sh and pm_netlink.sh to replace all
'pm_nl_ctl get' commands and outputs of 'pm_nl_ctl dump/get'.

Suggested-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

selftests: mptcp: export ip_mptcp to mptcp_lib

This patch exports ip_mptcp into mptcp_lib.sh as a public variable,
named MPTCP_LIB_IP_MPTCP. Add a helper mptcp_lib_set_ip_mptcp() to set
it, and a he

selftests: mptcp: export ip_mptcp to mptcp_lib

This patch exports ip_mptcp into mptcp_lib.sh as a public variable,
named MPTCP_LIB_IP_MPTCP. Add a helper mptcp_lib_set_ip_mptcp() to set
it, and a helper mptcp_lib_is_ip_mptcp() to test whether it is set. Use
these two helpers in mptcp_join.sh.

This patch is prepared for coming commits.

Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

selftests: mptcp: add ms units for tc-netem delay

'delay 1' in tc-netem is confusing, not sure if it's a delay of 1 second or
1 millisecond. This patch explicitly adds millisecond units to make thes

selftests: mptcp: add ms units for tc-netem delay

'delay 1' in tc-netem is confusing, not sure if it's a delay of 1 second or
1 millisecond. This patch explicitly adds millisecond units to make these
commands clearer.

Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

selftests: mptcp: add tc check for check_tools

tc are used in some test scripts: mptcp_connect.sh, mptcp_join.sh and
simult_flows.sh. It makes sense to check if tc is installed before running
these

selftests: mptcp: add tc check for check_tools

tc are used in some test scripts: mptcp_connect.sh, mptcp_join.sh and
simult_flows.sh. It makes sense to check if tc is installed before running
these scripts, just like other tools. So this patch add 'tc' check for
mptcp_lib_check_tools(), and check it in these test scripts.

Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

selftests: mptcp: join: fix dev in check_endpoint

There's a bug in pm_nl_check_endpoint(), 'dev' didn't be parsed correctly.
If calling it in the 2nd test of endpoint_tests() too, it fails with an
e

selftests: mptcp: join: fix dev in check_endpoint

There's a bug in pm_nl_check_endpoint(), 'dev' didn't be parsed correctly.
If calling it in the 2nd test of endpoint_tests() too, it fails with an
error like this:

creation [FAIL] expected '10.0.2.2 id 2 subflow dev dev' \
found '10.0.2.2 id 2 subflow dev ns2eth2'

The reason is '$2' should be set to 'dev', not '$1'. This patch fixes it.

Fixes: 69c6ce7b6eca ("selftests: mptcp: add implicit endpoint test case")
Cc: stable@vger.kernel.org
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240329-upstream-net-20240329-fallback-mib-v1-2-324a8981da48@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

selftests: mptcp: use KSFT_SKIP/KSFT_PASS/KSFT_FAIL

This patch uses the public var KSFT_SKIP in mptcp_lib.sh instead of
ksft_skip, and drop 'ksft_skip=4' in mptcp_join.sh.

Use KSFT_PASS and KSFT_FA

selftests: mptcp: use KSFT_SKIP/KSFT_PASS/KSFT_FAIL

This patch uses the public var KSFT_SKIP in mptcp_lib.sh instead of
ksft_skip, and drop 'ksft_skip=4' in mptcp_join.sh.

Use KSFT_PASS and KSFT_FAIL macros instead of 0 and 1 after 'exit '
and 'ret=' in all scripts:

exit 0 -> exit ${KSFT_PASS}
exit 1 -> exit ${KSFT_FAIL}
ret=0 -> ret=${KSFT_PASS}
ret=1 -> ret=${KSFT_FAIL}

Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240308-upstream-net-next-20240308-selftests-mptcp-unification-v1-15-4f42c347b653@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

selftests: mptcp: declare event macros in mptcp_lib

MPTCP event macros (SUB_ESTABLISHED, LISTENER_CREATED, LISTENER_CLOSED),
and the protocol family macros (AF_INET, AF_INET6) are defined in both
mp

selftests: mptcp: declare event macros in mptcp_lib

MPTCP event macros (SUB_ESTABLISHED, LISTENER_CREATED, LISTENER_CLOSED),
and the protocol family macros (AF_INET, AF_INET6) are defined in both
mptcp_join.sh and userspace_pm.sh. In order not to duplicate code, this
patch declares them all in mptcp_lib.sh with MPTCP_LIB_ prefixs.

Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240308-upstream-net-next-20240308-selftests-mptcp-unification-v1-14-4f42c347b653@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

selftests: mptcp: add mptcp_lib_verify_listener_events

To avoid duplicated code in different MPTCP selftests, we can add and use
helpers defined in mptcp_lib.sh.

The helper verify_listener_events()

selftests: mptcp: add mptcp_lib_verify_listener_events

To avoid duplicated code in different MPTCP selftests, we can add and use
helpers defined in mptcp_lib.sh.

The helper verify_listener_events() is defined both in mptcp_join.sh and
userspace_pm.sh, export it into mptcp_lib.sh and rename it with mptcp_lib_
prefix. Use this new helper in both scripts.

Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240308-upstream-net-next-20240308-selftests-mptcp-unification-v1-13-4f42c347b653@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

selftests: mptcp: call test_fail without argument

This patch modifies test_fail() to call mptcp_lib_pr_fail() only if there
are arguments (if [ ${#} -gt 0 ]) in userspace_pm.sh, add arguments
"unexp

selftests: mptcp: call test_fail without argument

This patch modifies test_fail() to call mptcp_lib_pr_fail() only if there
are arguments (if [ ${#} -gt 0 ]) in userspace_pm.sh, add arguments
"unexpected type: ${type}" when calling test_fail() from test_remove().
Then mptcp_lib_pr_fail() can be used in check_expected_one() instead of
test_fail().

The same in mptcp_join.sh, calling fail_test() without argument, and adapt
this helper not to call print_fail() in this case.

Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240308-upstream-net-next-20240308-selftests-mptcp-unification-v1-10-4f42c347b653@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

selftests: mptcp: print test results with colors

To unify the output formats of all test scripts, this patch adds
four more helpers:

mptcp_lib_pr_ok()
mptcp_lib_pr_skip()
mptcp_lib_pr_fail()
mp

selftests: mptcp: print test results with colors

To unify the output formats of all test scripts, this patch adds
four more helpers:

mptcp_lib_pr_ok()
mptcp_lib_pr_skip()
mptcp_lib_pr_fail()
mptcp_lib_pr_info()

to print out [ OK ], [SKIP], [FAIL] and 'INFO: ' with colors. Use them
in all scripts to print the "ok/skip/fail/info' using the same 'format'.

Having colors helps to quickly identify issues when looking at a long
list of output logs and results.

Note that now all print the same keywords, which was not the case
before, but it is good to uniform that.

Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240308-upstream-net-next-20240308-selftests-mptcp-unification-v1-9-4f42c347b653@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

selftests: mptcp: use += operator to append strings

This patch uses addition assignment operator (+=) to append strings
instead of duplicating the variable name in mptcp_connect.sh and
mptcp_join.sh

selftests: mptcp: use += operator to append strings

This patch uses addition assignment operator (+=) to append strings
instead of duplicating the variable name in mptcp_connect.sh and
mptcp_join.sh.

This can make the statements shorter.

Note: in mptcp_connect.sh, add a local variable extra in do_transfer to
save the various extra warning logs, using += to append it. And add a
new variable tc_info to save various tc info, also using += to append it.
This can make the code more readable and prepare for the next commit.

Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240308-upstream-net-next-20240308-selftests-mptcp-unification-v1-8-4f42c347b653@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

selftests: mptcp: add print_title in mptcp_lib

This patch adds a new variable MPTCP_LIB_TEST_FORMAT as the test title
printing format. Also add a helper mptcp_lib_print_title() to use this
format to

selftests: mptcp: add print_title in mptcp_lib

This patch adds a new variable MPTCP_LIB_TEST_FORMAT as the test title
printing format. Also add a helper mptcp_lib_print_title() to use this
format to print the test title with test counters. They are used in
mptcp_join.sh first.

Each MPTCP selftest is having subtests, and it helps to give them a
number to quickly identify them. This can be managed by mptcp_lib.sh,
reusing what has been done here. The following commit will use these
new helpers in the other tests.

Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240308-upstream-net-next-20240308-selftests-mptcp-unification-v1-6-4f42c347b653@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

selftests: mptcp: export TEST_COUNTER variable

Variable TEST_COUNT are used in mptcp_connect.sh and mptcp_join.sh as
test counters, which are initialized to 0, while variable test_cnt are used
in di

selftests: mptcp: export TEST_COUNTER variable

Variable TEST_COUNT are used in mptcp_connect.sh and mptcp_join.sh as
test counters, which are initialized to 0, while variable test_cnt are used
in diag.sh and simult_flows.sh, which are initialized to 1. To maintain
consistency, this patch renames them all as MPTCP_LIB_TEST_COUNTER,
initializes it to 1, and exports it into mptcp_lib.sh.

Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240308-upstream-net-next-20240308-selftests-mptcp-unification-v1-5-4f42c347b653@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

selftests: mptcp: add mptcp_lib_events helper

To avoid duplicated code in different MPTCP selftests, we can add and
use helpers defined in mptcp_lib.sh.

This patch unifies "pm_nl_ctl events" relate

selftests: mptcp: add mptcp_lib_events helper

To avoid duplicated code in different MPTCP selftests, we can add and
use helpers defined in mptcp_lib.sh.

This patch unifies "pm_nl_ctl events" related code in userspace_pm.sh
and mptcp_join.sh into a helper mptcp_lib_events(). Define it in
mptcp_lib.sh and use it in both scripts.

Note that mptcp_lib_kill_wait is now call before starting 'events' for
mptcp_join.sh as well, but that's fine: each test is started from a new
netns, so there will not be any existing pid there, and nothing is done
when mptcp_lib_kill_wait is called with 0.

Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240306-upstream-net-next-20240304-selftests-mptcp-shared-code-shellcheck-v2-6-bc79e6e5e6a0@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

selftests: mptcp: more operations in ns_init/exit

Set more the default sysctl values in mptcp_lib_ns_init(). It is fine to
do that everywhere, because they could be overridden latter if needed.

mpt

selftests: mptcp: more operations in ns_init/exit

Set more the default sysctl values in mptcp_lib_ns_init(). It is fine to
do that everywhere, because they could be overridden latter if needed.

mptcp_lib_ns_exit() now also try to remove temp netns files used for the
stats even for selftests not using them. That's fine to do that because
these files have a unique name.

Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240306-upstream-net-next-20240304-selftests-mptcp-shared-code-shellcheck-v2-5-bc79e6e5e6a0@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...