nbd/client: Accept 64-bit block status chunks

Once extended mode is enabled, we need to accept 64-bit status replies
(even for replies that don't exceed a 32-bit length). It is easier to
normalize

nbd/client: Accept 64-bit block status chunks

Once extended mode is enabled, we need to accept 64-bit status replies
(even for replies that don't exceed a 32-bit length). It is easier to
normalize narrow replies into wide format so that the rest of our code
only has to handle one width. Although a server is non-compliant if
it sends a 64-bit reply in compact mode, or a 32-bit reply in extended
mode, it is still easy enough to tolerate these mismatches.

In normal execution, we are only requesting "base:allocation" which
never exceeds 32 bits for flag values. But during testing with
x-dirty-bitmap, we can force qemu to connect to some other context
that might have 64-bit status bit; however, we ignore those upper bits
(other than mapping qemu:allocation-depth into something that
'qemu-img map --output=json' can expose), and since that only affects
testing, we really don't bother with checking whether more than the
two least-significant bits are set.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-ID: <20230925192229.3186470-22-eblake@redhat.com>

show more ...

nbd/client: Accept 64-bit block status chunks

Once extended mode is enabled, we need to accept 64-bit status replies
(even for replies that don't exceed a 32-bit length). It is easier to
normalize

nbd/client: Accept 64-bit block status chunks

Once extended mode is enabled, we need to accept 64-bit status replies
(even for replies that don't exceed a 32-bit length). It is easier to
normalize narrow replies into wide format so that the rest of our code
only has to handle one width. Although a server is non-compliant if
it sends a 64-bit reply in compact mode, or a 32-bit reply in extended
mode, it is still easy enough to tolerate these mismatches.

In normal execution, we are only requesting "base:allocation" which
never exceeds 32 bits for flag values. But during testing with
x-dirty-bitmap, we can force qemu to connect to some other context
that might have 64-bit status bit; however, we ignore those upper bits
(other than mapping qemu:allocation-depth into something that
'qemu-img map --output=json' can expose), and since that only affects
testing, we really don't bother with checking whether more than the
two least-significant bits are set.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-ID: <20230925192229.3186470-22-eblake@redhat.com>

show more ...

nbd/client: Accept 64-bit block status chunks

Once extended mode is enabled, we need to accept 64-bit status replies
(even for replies that don't exceed a 32-bit length). It is easier to
normalize

nbd/client: Accept 64-bit block status chunks

Once extended mode is enabled, we need to accept 64-bit status replies
(even for replies that don't exceed a 32-bit length). It is easier to
normalize narrow replies into wide format so that the rest of our code
only has to handle one width. Although a server is non-compliant if
it sends a 64-bit reply in compact mode, or a 32-bit reply in extended
mode, it is still easy enough to tolerate these mismatches.

In normal execution, we are only requesting "base:allocation" which
never exceeds 32 bits for flag values. But during testing with
x-dirty-bitmap, we can force qemu to connect to some other context
that might have 64-bit status bit; however, we ignore those upper bits
(other than mapping qemu:allocation-depth into something that
'qemu-img map --output=json' can expose), and since that only affects
testing, we really don't bother with checking whether more than the
two least-significant bits are set.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-ID: <20230925192229.3186470-22-eblake@redhat.com>

show more ...

nbd: Prepare for 64-bit request effect lengths

Widen the length field of NBDRequest to 64-bits, although we can
assert that all current uses are still under 32 bits: either because
of NBD_MAX_BUFFER

nbd: Prepare for 64-bit request effect lengths

Widen the length field of NBDRequest to 64-bits, although we can
assert that all current uses are still under 32 bits: either because
of NBD_MAX_BUFFER_SIZE which is even smaller (and where size_t can
still be appropriate, even on 32-bit platforms), or because nothing
ever puts us into NBD_MODE_EXTENDED yet (and while future patches will
allow larger transactions, the lengths in play here are still capped
at 32-bit). There are no semantic changes, other than a typo fix in a
couple of error messages.

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-ID: <20230829175826.377251-23-eblake@redhat.com>
[eblake: fix assertion bug in nbd_co_send_simple_reply]
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>

show more ...

nbd: Prepare for 64-bit request effect lengths

Widen the length field of NBDRequest to 64-bits, although we can
assert that all current uses are still under 32 bits: either because
of NBD_MAX_BUFFER

nbd: Prepare for 64-bit request effect lengths

Widen the length field of NBDRequest to 64-bits, although we can
assert that all current uses are still under 32 bits: either because
of NBD_MAX_BUFFER_SIZE which is even smaller (and where size_t can
still be appropriate, even on 32-bit platforms), or because nothing
ever puts us into NBD_MODE_EXTENDED yet (and while future patches will
allow larger transactions, the lengths in play here are still capped
at 32-bit). There are no semantic changes, other than a typo fix in a
couple of error messages.

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-ID: <20230829175826.377251-23-eblake@redhat.com>
[eblake: fix assertion bug in nbd_co_send_simple_reply]
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>

show more ...

nbd: Prepare for 64-bit request effect lengths

Widen the length field of NBDRequest to 64-bits, although we can
assert that all current uses are still under 32 bits: either because
of NBD_MAX_BUFFER

nbd: Prepare for 64-bit request effect lengths

Widen the length field of NBDRequest to 64-bits, although we can
assert that all current uses are still under 32 bits: either because
of NBD_MAX_BUFFER_SIZE which is even smaller (and where size_t can
still be appropriate, even on 32-bit platforms), or because nothing
ever puts us into NBD_MODE_EXTENDED yet (and while future patches will
allow larger transactions, the lengths in play here are still capped
at 32-bit). There are no semantic changes, other than a typo fix in a
couple of error messages.

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-ID: <20230829175826.377251-23-eblake@redhat.com>
[eblake: fix assertion bug in nbd_co_send_simple_reply]
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>

show more ...

block/io_uring: convert to blk_io_plug_call() API

Stop using the .bdrv_co_io_plug() API because it is not multi-queue
block layer friendly. Use the new blk_io_plug_call() API to batch I/O
submission

block/io_uring: convert to blk_io_plug_call() API

Stop using the .bdrv_co_io_plug() API because it is not multi-queue
block layer friendly. Use the new blk_io_plug_call() API to batch I/O
submission instead.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20230530180959.1108766-5-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

show more ...

block/nvme: convert to blk_io_plug_call() API

Stop using the .bdrv_co_io_plug() API because it is not multi-queue
block layer friendly. Use the new blk_io_plug_call() API to batch I/O
submission ins

block/nvme: convert to blk_io_plug_call() API

Stop using the .bdrv_co_io_plug() API because it is not multi-queue
block layer friendly. Use the new blk_io_plug_call() API to batch I/O
submission instead.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20230530180959.1108766-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

show more ...

block: add some trace events for zone append

Signed-off-by: Sam Li <faithilikerun@gmail.com>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>

block: add some trace events for zone append

Signed-off-by: Sam Li <faithilikerun@gmail.com>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20230508051510.177850-5-faithilikerun@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

show more ...

block: add some trace events for new block layer APIs

Signed-off-by: Sam Li <faithilikerun@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev

block: add some trace events for new block layer APIs

Signed-off-by: Sam Li <faithilikerun@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20230508045533.175575-8-faithilikerun@gmail.com
Message-id: 20230324090605.28361-8-faithilikerun@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

show more ...

nbd: trace long NBD operations

At the moment there are 2 sources of lengthy operations if configured:
* open connection, which could retry inside and
* reconnect of already opened connection
These o

nbd: trace long NBD operations

At the moment there are 2 sources of lengthy operations if configured:
* open connection, which could retry inside and
* reconnect of already opened connection
These operations could be quite lengthy and cumbersome to catch thus
it would be quite natural to add trace points for them.

This patch is based on the original downstream work made by Vladimir.

Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Eric Blake <eblake@redhat.com>
CC: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Hanna Reitz <hreitz@redhat.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>

show more ...

block/nvme: Display CQ/SQ pointer in nvme_free_queue_pair()

For debugging purpose it is helpful to know the CQ/SQ pointers.
We already have a trace event in nvme_free_queue_pair(), extend
it to repo

block/nvme: Display CQ/SQ pointer in nvme_free_queue_pair()

For debugging purpose it is helpful to know the CQ/SQ pointers.
We already have a trace event in nvme_free_queue_pair(), extend
it to report these pointer addresses.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211006164931.172349-3-philmd@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

show more ...

block-backend: convert blk_co_pwritev_part to int64_t bytes

We convert blk_do_pwritev_part() and some wrappers:
blk_co_pwritev_part(), blk_co_pwritev(), blk_co_pwrite_zeroes().

All functions are co

block-backend: convert blk_co_pwritev_part to int64_t bytes

We convert blk_do_pwritev_part() and some wrappers:
blk_co_pwritev_part(), blk_co_pwritev(), blk_co_pwrite_zeroes().

All functions are converted so that the parameter type becomes wider, so
all callers should be OK with it.

Look at blk_do_pwritev_part() body:
bytes is passed to:

- trace_blk_co_pwritev (we update it here)
- blk_check_byte_request, throttle_group_co_io_limits_intercept,
bdrv_co_pwritev_part - all already have int64_t argument.

Note that requests exceeding INT_MAX are still restricted by
blk_check_byte_request().

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211006131718.214235-4-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: grammar tweaks]
Signed-off-by: Eric Blake <eblake@redhat.com>

show more ...

block-backend: make blk_co_preadv() 64bit

For both updated functions, the type of bytes becomes wider, so all callers
should be OK with it.

blk_co_preadv() only passes its arguments to blk_do_pread

block-backend: make blk_co_preadv() 64bit

For both updated functions, the type of bytes becomes wider, so all callers
should be OK with it.

blk_co_preadv() only passes its arguments to blk_do_preadv().

blk_do_preadv() passes bytes to:

- trace_blk_co_preadv, which is updated too
- blk_check_byte_request, throttle_group_co_io_limits_intercept,
bdrv_co_preadv, which are already int64_t.

Note that requests exceeding INT_MAX are still restricted by
blk_check_byte_request().

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211006131718.214235-3-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: grammar tweaks]
Signed-off-by: Eric Blake <eblake@redhat.com>

show more ...

block: use int64_t instead of int in driver discard handlers

We are generally moving to int64_t for both offset and bytes parameters
on all io paths.

Main motivation is realization of 64-bit write_

block: use int64_t instead of int in driver discard handlers

We are generally moving to int64_t for both offset and bytes parameters
on all io paths.

Main motivation is realization of 64-bit write_zeroes operation for
fast zeroing large disk chunks, up to the whole disk.

We chose signed type, to be consistent with off_t (which is signed) and
with possibility for signed return type (where negative value means
error).

So, convert driver discard handlers bytes parameter to int64_t.

The only caller of all updated function is bdrv_co_pdiscard in
block/io.c. It is already prepared to work with 64bit requests, but
pass at most max(bs->bl.max_pdiscard, INT_MAX) to the driver.

Let's look at all updated functions:

blkdebug: all calculations are still OK, thanks to
bdrv_check_qiov_request().
both rule_check and bdrv_co_pdiscard are 64bit

blklogwrites: pass to blk_loc_writes_co_log which is 64bit

blkreplay, copy-on-read, filter-compress: pass to bdrv_co_pdiscard, OK

copy-before-write: pass to bdrv_co_pdiscard which is 64bit and to
cbw_do_copy_before_write which is 64bit

file-posix: one handler calls raw_account_discard() is 64bit and both
handlers calls raw_do_pdiscard(). Update raw_do_pdiscard, which pass
to RawPosixAIOData::aio_nbytes, which is 64bit (and calls
raw_account_discard())

gluster: somehow, third argument of glfs_discard_async is size_t.
Let's set max_pdiscard accordingly.

iscsi: iscsi_allocmap_set_invalid is 64bit,
!is_byte_request_lun_aligned is 64bit.
list.num is uint32_t. Let's clarify max_pdiscard and
pdiscard_alignment.

mirror_top: pass to bdrv_mirror_top_do_write() which is
64bit

nbd: protocol limitation. max_pdiscard is alredy set strict enough,
keep it as is for now.

nvme: buf.nlb is uint32_t and we do shift. So, add corresponding limits
to nvme_refresh_limits().

preallocate: pass to bdrv_co_pdiscard() which is 64bit.

rbd: pass to qemu_rbd_start_co() which is 64bit.

qcow2: calculations are still OK, thanks to bdrv_check_qiov_request(),
qcow2_cluster_discard() is 64bit.

raw-format: raw_adjust_offset() is 64bit, bdrv_co_pdiscard too.

throttle: pass to bdrv_co_pdiscard() which is 64bit and to
throttle_group_co_io_limits_intercept() which is 64bit as well.

test-block-iothread: bytes argument is unused

Great! Now all drivers are prepared to handle 64bit discard requests,
or else have explicit max_pdiscard limits.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210903102807.27127-11-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>

show more ...

block: use int64_t instead of int in driver write_zeroes handlers

We are generally moving to int64_t for both offset and bytes parameters
on all io paths.

Main motivation is realization of 64-bit w

block: use int64_t instead of int in driver write_zeroes handlers

We are generally moving to int64_t for both offset and bytes parameters
on all io paths.

Main motivation is realization of 64-bit write_zeroes operation for
fast zeroing large disk chunks, up to the whole disk.

We chose signed type, to be consistent with off_t (which is signed) and
with possibility for signed return type (where negative value means
error).

So, convert driver write_zeroes handlers bytes parameter to int64_t.

The only caller of all updated function is bdrv_co_do_pwrite_zeroes().

bdrv_co_do_pwrite_zeroes() itself is of course OK with widening of
callee parameter type. Also, bdrv_co_do_pwrite_zeroes()'s
max_write_zeroes is limited to INT_MAX. So, updated functions all are
safe, they will not get "bytes" larger than before.

Still, let's look through all updated functions, and add assertions to
the ones which are actually unprepared to values larger than INT_MAX.
For these drivers also set explicit max_pwrite_zeroes limit.

Let's go:

blkdebug: calculations can't overflow, thanks to
bdrv_check_qiov_request() in generic layer. rule_check() and
bdrv_co_pwrite_zeroes() both have 64bit argument.

blklogwrites: pass to blk_log_writes_co_log() with 64bit argument.

blkreplay, copy-on-read, filter-compress: pass to
bdrv_co_pwrite_zeroes() which is OK

copy-before-write: Calls cbw_do_copy_before_write() and
bdrv_co_pwrite_zeroes, both have 64bit argument.

file-posix: both handler calls raw_do_pwrite_zeroes, which is updated.
In raw_do_pwrite_zeroes() calculations are OK due to
bdrv_check_qiov_request(), bytes go to RawPosixAIOData::aio_nbytes
which is uint64_t.
Check also where that uint64_t gets handed:
handle_aiocb_write_zeroes_block() passes a uint64_t[2] to
ioctl(BLKZEROOUT), handle_aiocb_write_zeroes() calls do_fallocate()
which takes off_t (and we compile to always have 64-bit off_t), as
does handle_aiocb_write_zeroes_unmap. All look safe.

gluster: bytes go to GlusterAIOCB::size which is int64_t and to
glfs_zerofill_async works with off_t.

iscsi: Aha, here we deal with iscsi_writesame16_task() that has
uint32_t num_blocks argument and iscsi_writesame16_task() has
uint16_t argument. Make comments, add assertions and clarify
max_pwrite_zeroes calculation.
iscsi_allocmap_() functions already has int64_t argument
is_byte_request_lun_aligned is simple to update, do it.

mirror_top: pass to bdrv_mirror_top_do_write which has uint64_t
argument

nbd: Aha, here we have protocol limitation, and NBDRequest::len is
uint32_t. max_pwrite_zeroes is cleanly set to 32bit value, so we are
OK for now.

nvme: Again, protocol limitation. And no inherent limit for
write-zeroes at all. But from code that calculates cdw12 it's obvious
that we do have limit and alignment. Let's clarify it. Also,
obviously the code is not prepared to handle bytes=0. Let's handle
this case too.
trace events already 64bit

preallocate: pass to handle_write() and bdrv_co_pwrite_zeroes(), both
64bit.

rbd: pass to qemu_rbd_start_co() which is 64bit.

qcow2: offset + bytes and alignment still works good (thanks to
bdrv_check_qiov_request()), so tail calculation is OK
qcow2_subcluster_zeroize() has 64bit argument, should be OK
trace events updated

qed: qed_co_request wants int nb_sectors. Also in code we have size_t
used for request length which may be 32bit. So, let's just keep
INT_MAX as a limit (aligning it down to pwrite_zeroes_alignment) and
don't care.

raw-format: Is OK. raw_adjust_offset and bdrv_co_pwrite_zeroes are both
64bit.

throttle: Both throttle_group_co_io_limits_intercept() and
bdrv_co_pwrite_zeroes() are 64bit.

vmdk: pass to vmdk_pwritev which is 64bit

quorum: pass to quorum_co_pwritev() which is 64bit

Hooray!

At this point all block drivers are prepared to support 64bit
write-zero requests, or have explicitly set max_pwrite_zeroes.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210903102807.27127-8-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: use <= rather than < in assertions relying on max_pwrite_zeroes]
Signed-off-by: Eric Blake <eblake@redhat.com>

show more ...

block: use int64_t instead of uint64_t in driver write handlers

We are generally moving to int64_t for both offset and bytes parameters
on all io paths.

Main motivation is realization of 64-bit wri

block: use int64_t instead of uint64_t in driver write handlers

We are generally moving to int64_t for both offset and bytes parameters
on all io paths.

Main motivation is realization of 64-bit write_zeroes operation for
fast zeroing large disk chunks, up to the whole disk.

We chose signed type, to be consistent with off_t (which is signed) and
with possibility for signed return type (where negative value means
error).

So, convert driver write handlers parameters which are already 64bit to
signed type.

While being here, convert also flags parameter to be BdrvRequestFlags.

Now let's consider all callers. Simple

git grep '\->bdrv_\(aio\|co\)_pwritev\(_part\)\?'

shows that's there three callers of driver function:

bdrv_driver_pwritev() and bdrv_driver_pwritev_compressed() in
block/io.c, both pass int64_t, checked by bdrv_check_qiov_request() to
be non-negative.

qcow2_save_vmstate() does bdrv_check_qiov_request().

Still, the functions may be called directly, not only by drv->...
Let's check:

git grep '\.bdrv_\(aio\|co\)_pwritev\(_part\)\?\s*=' | \
awk '{print $4}' | sed 's/,//' | sed 's/&//' | sort | uniq | \
while read func; do git grep "$func(" | \
grep -v "$func(BlockDriverState"; done

shows several callers:

qcow2:
qcow2_co_truncate() write at most up to @offset, which is checked in
generic qcow2_co_truncate() by bdrv_check_request().
qcow2_co_pwritev_compressed_task() pass the request (or part of the
request) that already went through normal write path, so it should
be OK

qcow:
qcow_co_pwritev_compressed() pass int64_t, it's updated by this patch

quorum:
quorum_co_pwrite_zeroes() pass int64_t and int - OK

throttle:
throttle_co_pwritev_compressed() pass int64_t, it's updated by this
patch

vmdk:
vmdk_co_pwritev_compressed() pass int64_t, it's updated by this
patch

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210903102807.27127-5-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>

show more ...

block/nvme: Use safer trace format string

Fix when building with -Wshorten-64-to-32:

warning: implicit conversion loses integer precision: 'unsigned long' to 'int' [-Wshorten-64-to-32]

Reviewed-

block/nvme: Use safer trace format string

Fix when building with -Wshorten-64-to-32:

warning: implicit conversion loses integer precision: 'unsigned long' to 'int' [-Wshorten-64-to-32]

Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210902070025.197072-2-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

show more ...

block: add trace point when fdatasync fails

A flush failure is a critical failure scenario for some operations.
For example, it will prevent migration from completing, as it will
make vm_stop() repo

block: add trace point when fdatasync fails

A flush failure is a critical failure scenario for some operations.
For example, it will prevent migration from completing, as it will
make vm_stop() report an error. Thus it is important to have a
trace point present for debugging.

Reviewed-by: Connor Kuehl <ckuehl@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>

show more ...

docs: fix references to docs/devel/tracing.rst

Commit e50caf4a5c ("tracing: convert documentation to rST")
converted docs/devel/tracing.txt to docs/devel/tracing.rst.

We still have several referenc

docs: fix references to docs/devel/tracing.rst

Commit e50caf4a5c ("tracing: convert documentation to rST")
converted docs/devel/tracing.txt to docs/devel/tracing.rst.

We still have several references to the old file, so let's fix them
with the following command:

sed -i s/tracing.txt/tracing.rst/ $(git grep -l docs/devel/tracing.txt)

Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210517151702.109066-2-sgarzare@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

show more ...

block: Drop the sheepdog block driver

It was deprecated in commit e1c4269763, v5.2.0. See that commit
message for rationale.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210

block: Drop the sheepdog block driver

It was deprecated in commit e1c4269763, v5.2.0. See that commit
message for rationale.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210501075747.3293186-1-armbru@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>

show more ...

block/io: use int64_t bytes in copy_range

We are generally moving to int64_t for both offset and bytes parameters
on all io paths.

Main motivation is realization of 64-bit write_zeroes operation fo

block/io: use int64_t bytes in copy_range

We are generally moving to int64_t for both offset and bytes parameters
on all io paths.

Main motivation is realization of 64-bit write_zeroes operation for
fast zeroing large disk chunks, up to the whole disk.

We chose signed type, to be consistent with off_t (which is signed) and
with possibility for signed return type (where negative value means
error).

So, convert now copy_range parameters which are already 64bit to signed
type.

It's safe as we don't work with requests overflowing BDRV_MAX_LENGTH
(which is less than INT64_MAX), and do check the requests in
bdrv_co_copy_range_internal() (by bdrv_check_request32(), which calls
bdrv_check_request()).

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201211183934.169161-17-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>

show more ...

block/io: support int64_t bytes in read/write wrappers

We are generally moving to int64_t for both offset and bytes parameters
on all io paths.

Main motivation is realization of 64-bit write_zeroes

block/io: support int64_t bytes in read/write wrappers

We are generally moving to int64_t for both offset and bytes parameters
on all io paths.

Main motivation is realization of 64-bit write_zeroes operation for
fast zeroing large disk chunks, up to the whole disk.

We chose signed type, to be consistent with off_t (which is signed) and
with possibility for signed return type (where negative value means
error).

Now, since bdrv_co_preadv_part() and bdrv_co_pwritev_part() have been
updated, update all their wrappers.

For all of them type of 'bytes' is widening, so callers are safe. We
have update request_fn in blkverify.c simultaneously. Still it's just a
pointer to one of bdrv_co_pwritev() or bdrv_co_preadv(), and type is
widening for callers of the request_fn anyway.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201211183934.169161-16-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: grammar tweak]
Signed-off-by: Eric Blake <eblake@redhat.com>

show more ...

block/io: support int64_t bytes in bdrv_co_p{read,write}v_part()

We are generally moving to int64_t for both offset and bytes parameters
on all io paths.

Main motivation is realization of 64-bit wr

block/io: support int64_t bytes in bdrv_co_p{read,write}v_part()

We are generally moving to int64_t for both offset and bytes parameters
on all io paths.

Main motivation is realization of 64-bit write_zeroes operation for
fast zeroing large disk chunks, up to the whole disk.

We chose signed type, to be consistent with off_t (which is signed) and
with possibility for signed return type (where negative value means
error).

So, prepare bdrv_co_preadv_part() and bdrv_co_pwritev_part() and their
remaining dependencies now.

bdrv_pad_request() is updated simultaneously, as pointer to bytes passed
to it both from bdrv_co_pwritev_part() and bdrv_co_preadv_part().

So, all callers of bdrv_pad_request() are updated to pass 64bit bytes.
bdrv_pad_request() is already good for 64bit requests, add
corresponding assertion.

Look at bdrv_co_preadv_part() and bdrv_co_pwritev_part().
Type is widening, so callers are safe. Let's look inside the functions.

In bdrv_co_preadv_part() and bdrv_aligned_pwritev() we only pass bytes
to other already int64_t interfaces (and some obviously safe
calculations), it's OK.

In bdrv_co_do_zero_pwritev() aligned_bytes may become large now, still
it's passed to bdrv_aligned_pwritev which supports int64_t bytes.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201211183934.169161-15-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>

show more ...

block/io: support int64_t bytes in bdrv_co_do_copy_on_readv()

We are generally moving to int64_t for both offset and bytes parameters
on all io paths.

Main motivation is realization of 64-bit write

block/io: support int64_t bytes in bdrv_co_do_copy_on_readv()

We are generally moving to int64_t for both offset and bytes parameters
on all io paths.

Main motivation is realization of 64-bit write_zeroes operation for
fast zeroing large disk chunks, up to the whole disk.

We chose signed type, to be consistent with off_t (which is signed) and
with possibility for signed return type (where negative value means
error).

So, prepare bdrv_co_do_copy_on_readv() now.

'bytes' type widening, so callers are safe. Look at the function
itself:

bytes, skip_bytes and progress become int64_t.

bdrv_round_to_clusters() is OK, cluster_bytes now may be large.
trace_bdrv_co_do_copy_on_readv() is OK

looping through cluster_bytes is still OK.

pnum is still capped to max_transfer, and to MAX_BOUNCE_BUFFER when we
are going to do COR operation. Therefor calculations in
qemu_iovec_from_buf() and bdrv_driver_preadv() should not change.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201211183934.169161-13-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>

show more ...