hw/net: Constify VMState

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231221031652.119827-42-richard.henderson@linaro.org>

net: Provide MemReentrancyGuard * to qemu_new_nic()

Recently MemReentrancyGuard was added to DeviceState to record that the
device is engaging in I/O. The network device backend needs to update it
w

net: Provide MemReentrancyGuard * to qemu_new_nic()

Recently MemReentrancyGuard was added to DeviceState to record that the
device is engaging in I/O. The network device backend needs to update it
when delivering a packet to a device.

In preparation for such a change, add MemReentrancyGuard * as a
parameter of qemu_new_nic().

Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Jason Wang <jasowang@redhat.com>

show more ...

hw/net: spelling fixes

Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>

hw/net: spelling fixes

Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>

hw/net: spelling fixes

Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>

hw/net: rtl8139: Remove the logic of padding short frames in the receive path

Now that we have implemented unified short frames padding in the
QEMU networking codes, remove the same logic in the NIC

hw/net: rtl8139: Remove the logic of padding short frames in the receive path

Now that we have implemented unified short frames padding in the
QEMU networking codes, remove the same logic in the NIC codes.

Signed-off-by: Bin Meng <bmeng@tinylab.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>

show more ...

hw/net: rtl8139: Remove the logic of padding short frames in the receive path

Now that we have implemented unified short frames padding in the
QEMU networking codes, remove the same logic in the NIC

hw/net: rtl8139: Remove the logic of padding short frames in the receive path

Now that we have implemented unified short frames padding in the
QEMU networking codes, remove the same logic in the NIC codes.

Signed-off-by: Bin Meng <bmeng@tinylab.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>

show more ...

rtl8139: fix large_send_mss divide-by-zero

If the driver sets large_send_mss to 0 then a divide-by-zero occurs.
Even if the division wasn't a problem, the for loop that emits MSS-sized
packets would

rtl8139: fix large_send_mss divide-by-zero

If the driver sets large_send_mss to 0 then a divide-by-zero occurs.
Even if the division wasn't a problem, the for loop that emits MSS-sized
packets would never terminate.

Solve these issues by skipping offloading when large_send_mss=0.

This issue was found by OSS-Fuzz as part of Alexander Bulekov's device
fuzzing work. The reproducer is:

$ cat << EOF | ./qemu-system-i386 -display none -machine accel=qtest, -m \
512M,slots=1,maxmem=0xffff000000000000 -machine q35 -nodefaults -device \
rtl8139,netdev=net0 -netdev user,id=net0 -device \
pc-dimm,id=nv1,memdev=mem1,addr=0xb800a64602800000 -object \
memory-backend-ram,id=mem1,size=2M -qtest stdio
outl 0xcf8 0x80000814
outl 0xcfc 0xe0000000
outl 0xcf8 0x80000804
outw 0xcfc 0x06
write 0xe0000037 0x1 0x04
write 0xe00000e0 0x2 0x01
write 0x1 0x1 0x04
write 0x3 0x1 0x98
write 0xa 0x1 0x8c
write 0xb 0x1 0x02
write 0xc 0x1 0x46
write 0xd 0x1 0xa6
write 0xf 0x1 0xb8
write 0xb800a646028c000c 0x1 0x08
write 0xb800a646028c000e 0x1 0x47
write 0xb800a646028c0010 0x1 0x02
write 0xb800a646028c0017 0x1 0x06
write 0xb800a646028c0036 0x1 0x80
write 0xe00000d9 0x1 0x40
EOF

Buglink: https://gitlab.com/qemu-project/qemu/-/issues/1582
Closes: https://gitlab.com/qemu-project/qemu/-/issues/1582
Cc: qemu-stable@nongnu.org
Cc: Peter Maydell <peter.maydell@linaro.org>
Fixes: 6d71357a3b65 ("rtl8139: honor large send MSS value")
Reported-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

show more ...

include/hw/pci: Split pci_device.h off pci.h

PCIDeviceClass and PCIDevice are defined in pci.h. Many users of the
header don't actually need them. Similar structs live in their own
headers: PCIBus

include/hw/pci: Split pci_device.h off pci.h

PCIDeviceClass and PCIDevice are defined in pci.h. Many users of the
header don't actually need them. Similar structs live in their own
headers: PCIBusClass and PCIBus in pci_bus.h, PCIBridge in
pci_bridge.h, PCIHostBridgeClass and PCIHostState in pci_host.h,
PCIExpressHost in pcie_host.h, and PCIERootPortClass, PCIEPort, and
PCIESlot in pcie_port.h.

Move PCIDeviceClass and PCIDeviceClass to new pci_device.h, along with
the code that needs them. Adjust include directives.

This also enables the next commit.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221222100330.380143-6-armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

include/hw/pci: Split pci_device.h off pci.h

PCIDeviceClass and PCIDevice are defined in pci.h. Many users of the
header don't actually need them. Similar structs live in their own
headers: PCIBus

include/hw/pci: Split pci_device.h off pci.h

PCIDeviceClass and PCIDevice are defined in pci.h. Many users of the
header don't actually need them. Similar structs live in their own
headers: PCIBusClass and PCIBus in pci_bus.h, PCIBridge in
pci_bridge.h, PCIHostBridgeClass and PCIHostState in pci_host.h,
PCIExpressHost in pcie_host.h, and PCIERootPortClass, PCIEPort, and
PCIESlot in pcie_port.h.

Move PCIDeviceClass and PCIDeviceClass to new pci_device.h, along with
the code that needs them. Adjust include directives.

This also enables the next commit.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221222100330.380143-6-armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

include/hw/pci: Split pci_device.h off pci.h

PCIDeviceClass and PCIDevice are defined in pci.h. Many users of the
header don't actually need them. Similar structs live in their own
headers: PCIBus

include/hw/pci: Split pci_device.h off pci.h

PCIDeviceClass and PCIDevice are defined in pci.h. Many users of the
header don't actually need them. Similar structs live in their own
headers: PCIBusClass and PCIBus in pci_bus.h, PCIBridge in
pci_bridge.h, PCIHostBridgeClass and PCIHostState in pci_host.h,
PCIExpressHost in pcie_host.h, and PCIERootPortClass, PCIEPort, and
PCIESlot in pcie_port.h.

Move PCIDeviceClass and PCIDeviceClass to new pci_device.h, along with
the code that needs them. Adjust include directives.

This also enables the next commit.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221222100330.380143-6-armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

rtl8139: honor large send MSS value

The Large-Send Task Offload Tx Descriptor (9.2.1 Transmit) has a
Large-Send MSS value where the driver specifies the MSS. See the
datasheet here:
http://realtek.i

rtl8139: honor large send MSS value

The Large-Send Task Offload Tx Descriptor (9.2.1 Transmit) has a
Large-Send MSS value where the driver specifies the MSS. See the
datasheet here:
http://realtek.info/pdf/rtl8139cp.pdf

The code ignores this value and uses a hardcoded MSS of 1500 bytes
instead. When the MTU is less than 1500 bytes the hardcoded value
results in IP fragmentation and poor performance.

Use the Large-Send MSS value to correctly size Large-Send packets.

Jason Wang <jasowang@redhat.com> noticed that the Large-Send MSS value
mask was incorrect so it is adjusted to match the datasheet and Linux
8139cp driver.

This issue was discussed in the past here:
https://lore.kernel.org/all/20161114162505.GD26664@stefanha-x1.localdomain/

Reported-by: Russell King - ARM Linux <linux@armlinux.org.uk>
Reported-by: Tobias Fiebig <tobias+git@fiebig.nl>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1312
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221117165554.1773409-4-stefanha@redhat.com>

show more ...

rtl8139: keep Tx command mode 0 and 1 separate

There are two Tx Descriptor formats called mode 0 and mode 1. The mode
is determined by the Large Send bit.

CP_TX_IPCS (bit 18) is defined in mode 1 b

rtl8139: keep Tx command mode 0 and 1 separate

There are two Tx Descriptor formats called mode 0 and mode 1. The mode
is determined by the Large Send bit.

CP_TX_IPCS (bit 18) is defined in mode 1 but the code checks the bit
unconditionally. In mode 0 bit 18 is part of the Large Send MSS value.

Explicitly check the Large Send bit to distinguish Tx command modes.
This avoids bugs where modes are confused. Note that I didn't find any
actual bugs aside from needlessly computing the IP checksum when the
Large Send bit is enabled.

Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221117165554.1773409-3-stefanha@redhat.com>

show more ...

rtl8139: avoid clobbering tx descriptor bits

The device turns the Tx Descriptor into a Tx Status descriptor after
fully reading the descriptor. This involves clearing Tx Own (bit 31) to
indicate tha

rtl8139: avoid clobbering tx descriptor bits

The device turns the Tx Descriptor into a Tx Status descriptor after
fully reading the descriptor. This involves clearing Tx Own (bit 31) to
indicate that the driver has ownership of the descriptor again as well
as several other bits.

The code keeps the first dword of the Tx Descriptor in the txdw0 local
variable. txdw0 is reused to build the first word of the Tx Status
descriptor. Later on the code uses txdw0 again, incorrectly assuming
that it still contains the first dword of the Tx Descriptor. The tx
offloading code misbehaves because it sees bogus bits in txdw0.

Use a separate local variable for Tx Status and preserve Tx Descriptor
in txdw0.

Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221117165554.1773409-2-stefanha@redhat.com>

show more ...

rtl8139: Remove unused variable

Variable send_count used in rtl8139_cplus_transmit_one function is only
incremented but never read. This causes 'Unused but set variable' warning
on Clang 15.0.1 comp

rtl8139: Remove unused variable

Variable send_count used in rtl8139_cplus_transmit_one function is only
incremented but never read. This causes 'Unused but set variable' warning
on Clang 15.0.1 compiler.

Removing the variable to prevent the warning.

Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <15a32dd06c492216cbf27cd3ddcbe1e9afb8d8f5.1668009030.git.mrezanin@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

show more ...

rtl8139: Remove unused variable

Variable send_count used in rtl8139_cplus_transmit_one function is only
incremented but never read. This causes 'Unused but set variable' warning
on Clang 15.0.1 comp

rtl8139: Remove unused variable

Variable send_count used in rtl8139_cplus_transmit_one function is only
incremented but never read. This causes 'Unused but set variable' warning
on Clang 15.0.1 compiler.

Removing the variable to prevent the warning.

Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <15a32dd06c492216cbf27cd3ddcbe1e9afb8d8f5.1668009030.git.mrezanin@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

show more ...

Replace GCC_FMT_ATTR with G_GNUC_PRINTF

One less qemu-specific macro. It also helps to make some headers/units
only depend on glib, and thus moved in standalone projects eventually.

Signed-off-by:

Replace GCC_FMT_ATTR with G_GNUC_PRINTF

One less qemu-specific macro. It also helps to make some headers/units
only depend on glib, and thus moved in standalone projects eventually.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>

show more ...

rtl8139: switch to use qemu_receive_packet() for loopback

This patch switches to use qemu_receive_packet() which can detect
reentrancy and return early.

This is intended to address CVE-2021-3416.

rtl8139: switch to use qemu_receive_packet() for loopback

This patch switches to use qemu_receive_packet() which can detect
reentrancy and return early.

This is intended to address CVE-2021-3416.

Cc: Prasad J Pandit <ppandit@redhat.com>
Cc: qemu-stable@nongnu.org
Buglink: https://bugs.launchpad.net/qemu/+bug/1910826
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Jason Wang <jasowang@redhat.com>

show more ...

Remove superfluous timer_del() calls

This commit is the result of running the timer-del-timer-free.cocci
script on the whole source tree.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Ack

Remove superfluous timer_del() calls

This commit is the result of running the timer-del-timer-free.cocci
script on the whole source tree.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Corey Minyard <cminyard@mvista.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201215154107.3255-4-peter.maydell@linaro.org

show more ...

Use OBJECT_DECLARE_SIMPLE_TYPE when possible

This converts existing DECLARE_INSTANCE_CHECKER usage to
OBJECT_DECLARE_SIMPLE_TYPE when possible.

$ ./scripts/codeconverter/converter.py -i \
--patte

Use OBJECT_DECLARE_SIMPLE_TYPE when possible

This converts existing DECLARE_INSTANCE_CHECKER usage to
OBJECT_DECLARE_SIMPLE_TYPE when possible.

$ ./scripts/codeconverter/converter.py -i \
--pattern=AddObjectDeclareSimpleType $(git grep -l '' -- '*.[ch]')

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Paul Durrant <paul@xen.org>
Message-Id: <20200916182519.415636-6-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

show more ...

Use DECLARE_*CHECKER* macros

Generated using:

$ ./scripts/codeconverter/converter.py -i \
--pattern=TypeCheckMacro $(git grep -l '' -- '*.[ch]')

Reviewed-by: Daniel P. Berrangé <berrange@redha

Use DECLARE_*CHECKER* macros

Generated using:

$ ./scripts/codeconverter/converter.py -i \
--pattern=TypeCheckMacro $(git grep -l '' -- '*.[ch]')

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-12-ehabkost@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-13-ehabkost@redhat.com>
Message-Id: <20200831210740.126168-14-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

show more ...

Move QOM typedefs and add missing includes

Some typedefs and macros are defined after the type check macros.
This makes it difficult to automatically replace their
definitions with OBJECT_DECLARE_TY

Move QOM typedefs and add missing includes

Some typedefs and macros are defined after the type check macros.
This makes it difficult to automatically replace their
definitions with OBJECT_DECLARE_TYPE.

Patch generated using:

$ ./scripts/codeconverter/converter.py -i \
--pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]')

which will split "typdef struct { ... } TypedefName"
declarations.

Followed by:

$ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \
$(git grep -l '' -- '*.[ch]')

which will:
- move the typedefs and #defines above the type check macros
- add missing #include "qom/object.h" lines if necessary

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-9-ehabkost@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-10-ehabkost@redhat.com>
Message-Id: <20200831210740.126168-11-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

show more ...

Drop more @errp parameters after previous commit

Several functions can't fail anymore: ich9_pm_add_properties(),
device_add_bootindex_property(), ppc_compat_add_property(),
spapr_caps_add_properties

Drop more @errp parameters after previous commit

Several functions can't fail anymore: ich9_pm_add_properties(),
device_add_bootindex_property(), ppc_compat_add_property(),
spapr_caps_add_properties(), PropertyInfo.create(). Drop their @errp
parameter.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-16-armbru@redhat.com>

show more ...

hw/net: Make NetCanReceive() return a boolean

The NetCanReceive handler return whether the device can or
can not receive new packets. Make it obvious by returning
a boolean type.

Signed-off-by: Phi

hw/net: Make NetCanReceive() return a boolean

The NetCanReceive handler return whether the device can or
can not receive new packets. Make it obvious by returning
a boolean type.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>

show more ...

hw/net/rtl8139: Update coding style to make checkpatch.pl happy

We will modify this code in the next commit. Clean it up
first to avoid checkpatch.pl errors.

Signed-off-by: Philippe Mathieu-Daudé <

hw/net/rtl8139: Update coding style to make checkpatch.pl happy

We will modify this code in the next commit. Clean it up
first to avoid checkpatch.pl errors.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>

show more ...