speed/sdhci: Add trace events

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Message

speed/sdhci: Add trace events

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Message-Id: <20211018132609.160008-6-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

show more ...

docs: fix references to docs/devel/tracing.rst

Commit e50caf4a5c ("tracing: convert documentation to rST")
converted docs/devel/tracing.txt to docs/devel/tracing.rst.

We still have several referenc

docs: fix references to docs/devel/tracing.rst

Commit e50caf4a5c ("tracing: convert documentation to rST")
converted docs/devel/tracing.txt to docs/devel/tracing.rst.

We still have several references to the old file, so let's fix them
with the following command:

sed -i s/tracing.txt/tracing.rst/ $(git grep -l docs/devel/tracing.txt)

Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210517151702.109066-2-sgarzare@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

show more ...

Drop the deprecated lm32 target

Target lm32 was deprecated in commit d8498005122, v5.2.0. See there
for rationale.

Some of its code lives on in device models derived from milkymist
ones: hw/char/d

Drop the deprecated lm32 target

Target lm32 was deprecated in commit d8498005122, v5.2.0. See there
for rationale.

Some of its code lives on in device models derived from milkymist
ones: hw/char/digic-uart.c and hw/display/bcm2835_fb.c.

Cc: Michael Walle <michael@walle.cc>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210503084034.3804963-2-armbru@redhat.com>
Acked-by: Michael Walle <michael@walle.cc>
[Trivial conflicts resolved, reST markup fixed]

show more ...

hw/sd/sdcard: Make iolen unsigned

I/O request length can not be negative.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by:

hw/sd/sdcard: Make iolen unsigned

I/O request length can not be negative.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20200630133912.9428-15-f4bug@amsat.org>

show more ...

hw/sd/sdcard: Add trace event for ERASE command (CMD38)

Trace addresses provided to the ERASE command.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Alexander Bulekov <alxndr@b

hw/sd/sdcard: Add trace event for ERASE command (CMD38)

Trace addresses provided to the ERASE command.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20201015063824.212980-2-f4bug@amsat.org>

show more ...

hw/sd/pl181: Replace disabled fprintf()s by trace events

Convert disabled DPRINTF() to trace events and remove ifdef'ry.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistai

hw/sd/pl181: Replace disabled fprintf()s by trace events

Convert disabled DPRINTF() to trace events and remove ifdef'ry.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200705204630.4133-9-f4bug@amsat.org>

show more ...

hw/arm/allwinner: add SD/MMC host controller

The Allwinner System on Chip families sun4i and above contain
an integrated storage controller for Secure Digital (SD) and
Multi Media Card (MMC) interfa

hw/arm/allwinner: add SD/MMC host controller

The Allwinner System on Chip families sun4i and above contain
an integrated storage controller for Secure Digital (SD) and
Multi Media Card (MMC) interfaces. This commit adds support
for the Allwinner SD/MMC storage controller with the following
emulated features:

* DMA transfers
* Direct FIFO I/O
* Short/Long format command responses
* Auto-Stop command (CMD12)
* Insert & remove card detection

The following boards are extended with the SD host controller:

* Cubieboard (hw/arm/cubieboard.c)
* Orange Pi PC (hw/arm/orangepi.c)

Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200311221854.30370-9-nieklinnenbank@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

trace: Remove trailing newline in events

While the tracing framework does not forbid trailing newline in
events format string, using them lead to confuse output.
It is the responsibility of the back

trace: Remove trailing newline in events

While the tracing framework does not forbid trailing newline in
events format string, using them lead to confuse output.
It is the responsibility of the backend to properly end an event
line.

Some of our formats have trailing newlines, remove them.

[Fixed typo in commit description reported by Eric Blake
<eblake@redhat.com>
--Stefan]

Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190916095121.29506-2-philmd@redhat.com
Message-Id: <20190916095121.29506-2-philmd@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

show more ...

trace-events: Delete unused trace points

Tracked down with cleanup-trace-events.pl. Funnies requiring manual
post-processing:

* block.c and blockdev.c trace points are in block/trace-events.

* hw

trace-events: Delete unused trace points

Tracked down with cleanup-trace-events.pl. Funnies requiring manual
post-processing:

* block.c and blockdev.c trace points are in block/trace-events.

* hw/block/nvme.c uses the preprocessor to hide its trace point use
from cleanup-trace-events.pl.

* include/hw/xen/xen_common.h trace points are in hw/xen/trace-events.

* net/colo-compare and net/filter-rewriter.c use pseudo trace points
colo_compare_udp_miscompare and colo_filter_rewriter_debug to guard
debug code.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20190314180929.27722-5-armbru@redhat.com
Message-Id: <20190314180929.27722-5-armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

show more ...

trace-events: Shorten file names in comments

We spell out sub/dir/ in sub/dir/trace-events' comments pointing to
source files. That's because when trace-events got split up, the
comments were moved

trace-events: Shorten file names in comments

We spell out sub/dir/ in sub/dir/trace-events' comments pointing to
source files. That's because when trace-events got split up, the
comments were moved verbatim.

Delete the sub/dir/ part from these comments. Gets rid of several
misspellings.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190314180929.27722-3-armbru@redhat.com
Message-Id: <20190314180929.27722-3-armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

show more ...

sd: Don't trace SDRequest crc field

We don't actually implement SD command CRC checking, because
for almost all of our SD controllers the CRC generation is
done in hardware, and so modelling CRC gen

sd: Don't trace SDRequest crc field

We don't actually implement SD command CRC checking, because
for almost all of our SD controllers the CRC generation is
done in hardware, and so modelling CRC generation and checking
would be a bit pointless. (The exception is that milkymist-memcard
makes the guest software compute the CRC.)

As a result almost all of our SD controller models don't bother
to set the SDRequest crc field, and the SD card model doesn't
check it. So the tracing of it in sdbus_do_command() provokes
Coverity warnings about use of uninitialized data.

Drop the CRC field from the trace; we can always add it back
if and when we do anything useful with the CRC.

Fixes Coverity issues 1386072, 1386074, 1386076, 1390571.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180626180324.5537-1-peter.maydell@linaro.org

show more ...

sdcard: Reduce sdcard_set_blocklen() trace digits

Per the Physical Layer Simplified Spec. "5.3 CSD Register":

"The maximum block length might therefore be in the range 512...2048 bytes"

Therefor

sdcard: Reduce sdcard_set_blocklen() trace digits

Per the Physical Layer Simplified Spec. "5.3 CSD Register":

"The maximum block length might therefore be in the range 512...2048 bytes"

Therefore 3 hexdigits are enough to report the block length.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

show more ...

hw/sd/bcm2835_sdhost: Add tracepoints

Add some tracepoints to the bcm2835_sdhost driver, to assist
debugging.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-D

hw/sd/bcm2835_sdhost: Add tracepoints

Add some tracepoints to the bcm2835_sdhost driver, to assist
debugging.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180319161556.16446-2-peter.maydell@linaro.org

show more ...

sdcard: Display which protocol is used when tracing (SD or SPI)

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 201803091536

sdcard: Display which protocol is used when tracing (SD or SPI)

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180309153654.13518-4-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

sdcard: Display command name when tracing CMD/ACMD

The SDBus will reuse these functions, so we put them in a new source file.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 201

sdcard: Display command name when tracing CMD/ACMD

The SDBus will reuse these functions, so we put them in a new source file.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180309153654.13518-3-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: slight wordsmithing of comments, added note that string
returned does not need to be freed]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

sdcard: add more trace events

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 20180215220540.6556-6-f4bug@amsat.org
Revie

sdcard: add more trace events

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 20180215220540.6556-6-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

sdcard: add a trace event for command responses

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180215220540.6556-4-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@li

sdcard: add a trace event for command responses

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180215220540.6556-4-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

sdcard: replace DPRINTF() by trace events

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 20180215220540.6556-3-f4bug@

sdcard: replace DPRINTF() by trace events

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 20180215220540.6556-3-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

sdhci: implement CMD/DAT[] fields in the Present State register

[based on a patch from Alistair Francis <alistair.francis@xilinx.com>
from qemu/xilinx tag xilinx-v2015.2]
Signed-off-by: Philippe Ma

sdhci: implement CMD/DAT[] fields in the Present State register

[based on a patch from Alistair Francis <alistair.francis@xilinx.com>
from qemu/xilinx tag xilinx-v2015.2]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-Id: <20180208164818.7961-23-f4bug@amsat.org>

show more ...

sdhci: implement UHS-I voltage switch

[based on a patch from Alistair Francis <alistair.francis@xilinx.com>
from qemu/xilinx tag xilinx-v2015.2]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.o

sdhci: implement UHS-I voltage switch

[based on a patch from Alistair Francis <alistair.francis@xilinx.com>
from qemu/xilinx tag xilinx-v2015.2]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-Id: <20180208164818.7961-22-f4bug@amsat.org>

show more ...

sdbus: add trace events

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-Id: <20180208164818.7961-21-f4bug@amsat.org>

sdhci: check the Spec v1 capabilities correctness

Incorrect value will throw an error.

Note than Spec v2 is supported by default.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-b

sdhci: check the Spec v1 capabilities correctness

Incorrect value will throw an error.

Note than Spec v2 is supported by default.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-Id: <20180208164818.7961-11-f4bug@amsat.org>

show more ...

sdhci: convert the DPRINT() calls into trace events

zero-initialize ADMADescr 'dscr' in sdhci_do_adma() to avoid:

hw/sd/sdhci.c: In function ‘sdhci_do_adma’:
hw/sd/sdhci.c:714:29: error: ‘dscr.

sdhci: convert the DPRINT() calls into trace events

zero-initialize ADMADescr 'dscr' in sdhci_do_adma() to avoid:

hw/sd/sdhci.c: In function ‘sdhci_do_adma’:
hw/sd/sdhci.c:714:29: error: ‘dscr.addr’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
trace_sdhci_adma("link", s->admasysaddr);
^

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 20180115182436.2066-9-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/sd/pxa2xx_mmci: add read/write() trace events

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 20180104000156.30932-

hw/sd/pxa2xx_mmci: add read/write() trace events

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 20180104000156.30932-1-f4bug@amsat.org
[PMM: add missing include]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

trace-events: fix code style: print 0x before hex numbers

The only exception are groups of numers separated by symbols
'.', ' ', ':', '/', like 'ab.09.7d'.

This patch is made by the following:

> f

trace-events: fix code style: print 0x before hex numbers

The only exception are groups of numers separated by symbols
'.', ' ', ':', '/', like 'ab.09.7d'.

This patch is made by the following:

> find . -name trace-events | xargs python script.py

where script.py is the following python script:
=========================
#!/usr/bin/env python

import sys
import re
import fileinput

rhex = '%[-+ *.0-9]*(?:[hljztL]|ll|hh)?(?:x|X|"\s*PRI[xX][^"]*"?)'
rgroup = re.compile('((?:' + rhex + '[.:/ ])+' + rhex + ')')
rbad = re.compile('(?<!0x)' + rhex)

files = sys.argv[1:]

for fname in files:
for line in fileinput.input(fname, inplace=True):
arr = re.split(rgroup, line)
for i in range(0, len(arr), 2):
arr[i] = re.sub(rbad, '0x\g<0>', arr[i])

sys.stdout.write(''.join(arr))
=========================

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-id: 20170731160135.12101-5-vsementsov@virtuozzo.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

show more ...