io/command: implement support for win32

The initial implementation was changing the pipe state created by GLib
to PIPE_NOWAIT, but it turns out it doesn't work (read/write returns an
error). Since r

io/command: implement support for win32

The initial implementation was changing the pipe state created by GLib
to PIPE_NOWAIT, but it turns out it doesn't work (read/write returns an
error). Since reading may return less than the requested amount, it
seems to be non-blocking already. However, the IO operation may block
until the FD is ready, I can't find good sources of information, to be
safe we can just poll for readiness before.

Alternatively, we could setup the FDs ourself, and use UNIX sockets on
Windows, which can be used in blocking/non-blocking mode. I haven't
tried it, as I am not sure it is necessary.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20221006113657.2656108-6-marcandre.lureau@redhat.com>

show more ...

io/command: use glib GSpawn, instead of open-coding fork/exec

Simplify qio_channel_command_new_spawn() with GSpawn API. This will
allow to build for WIN32 in the following patches.

As pointed out b

io/command: use glib GSpawn, instead of open-coding fork/exec

Simplify qio_channel_command_new_spawn() with GSpawn API. This will
allow to build for WIN32 in the following patches.

As pointed out by Daniel Berrangé: there is a change in semantics here
too. The current code only touches stdin/stdout/stderr. Any other FDs
which do NOT have O_CLOEXEC set will be inherited. With the new code,
all FDs except stdin/out/err will be explicitly closed, because we don't
set the flag G_SPAWN_LEAVE_DESCRIPTORS_OPEN. The only place we use
QIOChannelCommand today is the migration exec: protocol, and that is
only declared to use stdin/stdout.

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20221006113657.2656108-5-marcandre.lureau@redhat.com>

show more ...

io/command: implement support for win32

The initial implementation was changing the pipe state created by GLib
to PIPE_NOWAIT, but it turns out it doesn't work (read/write returns an
error). Since r

io/command: implement support for win32

The initial implementation was changing the pipe state created by GLib
to PIPE_NOWAIT, but it turns out it doesn't work (read/write returns an
error). Since reading may return less than the requested amount, it
seems to be non-blocking already. However, the IO operation may block
until the FD is ready, I can't find good sources of information, to be
safe we can just poll for readiness before.

Alternatively, we could setup the FDs ourself, and use UNIX sockets on
Windows, which can be used in blocking/non-blocking mode. I haven't
tried it, as I am not sure it is necessary.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20221006113657.2656108-6-marcandre.lureau@redhat.com>

show more ...

io/command: use glib GSpawn, instead of open-coding fork/exec

Simplify qio_channel_command_new_spawn() with GSpawn API. This will
allow to build for WIN32 in the following patches.

As pointed out b

io/command: use glib GSpawn, instead of open-coding fork/exec

Simplify qio_channel_command_new_spawn() with GSpawn API. This will
allow to build for WIN32 in the following patches.

As pointed out by Daniel Berrangé: there is a change in semantics here
too. The current code only touches stdin/stdout/stderr. Any other FDs
which do NOT have O_CLOEXEC set will be inherited. With the new code,
all FDs except stdin/out/err will be explicitly closed, because we don't
set the flag G_SPAWN_LEAVE_DESCRIPTORS_OPEN. The only place we use
QIOChannelCommand today is the migration exec: protocol, and that is
only declared to use stdin/stdout.

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20221006113657.2656108-5-marcandre.lureau@redhat.com>

show more ...

io/command: implement support for win32

The initial implementation was changing the pipe state created by GLib
to PIPE_NOWAIT, but it turns out it doesn't work (read/write returns an
error). Since r

io/command: implement support for win32

The initial implementation was changing the pipe state created by GLib
to PIPE_NOWAIT, but it turns out it doesn't work (read/write returns an
error). Since reading may return less than the requested amount, it
seems to be non-blocking already. However, the IO operation may block
until the FD is ready, I can't find good sources of information, to be
safe we can just poll for readiness before.

Alternatively, we could setup the FDs ourself, and use UNIX sockets on
Windows, which can be used in blocking/non-blocking mode. I haven't
tried it, as I am not sure it is necessary.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20221006113657.2656108-6-marcandre.lureau@redhat.com>

show more ...

io/command: use glib GSpawn, instead of open-coding fork/exec

Simplify qio_channel_command_new_spawn() with GSpawn API. This will
allow to build for WIN32 in the following patches.

As pointed out b

io/command: use glib GSpawn, instead of open-coding fork/exec

Simplify qio_channel_command_new_spawn() with GSpawn API. This will
allow to build for WIN32 in the following patches.

As pointed out by Daniel Berrangé: there is a change in semantics here
too. The current code only touches stdin/stdout/stderr. Any other FDs
which do NOT have O_CLOEXEC set will be inherited. With the new code,
all FDs except stdin/out/err will be explicitly closed, because we don't
set the flag G_SPAWN_LEAVE_DESCRIPTORS_OPEN. The only place we use
QIOChannelCommand today is the migration exec: protocol, and that is
only declared to use stdin/stdout.

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20221006113657.2656108-5-marcandre.lureau@redhat.com>

show more ...

io: make qio_channel_command_new_pid() static

The function isn't used outside of qio_channel_command_new_spawn(),
which is !win32-specific.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat

io: make qio_channel_command_new_pid() static

The function isn't used outside of qio_channel_command_new_spawn(),
which is !win32-specific.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

io: Fix Lesser GPL version number

There is no "version 2" of the "Lesser" General Public License.
It is either "GPL version 2.0" or "Lesser GPL version 2.1".
This patch replaces all occurrences of "

io: Fix Lesser GPL version number

There is no "version 2" of the "Lesser" General Public License.
It is either "GPL version 2.0" or "Lesser GPL version 2.1".
This patch replaces all occurrences of "Lesser GPL version 2" with
"Lesser GPL version 2.1" in comment section.

Signed-off-by: Chetan Pant <chetan4windows@gmail.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>

show more ...

io: Fix Lesser GPL version number

There is no "version 2" of the "Lesser" General Public License.
It is either "GPL version 2.0" or "Lesser GPL version 2.1".
This patch replaces all occurrences of "

io: Fix Lesser GPL version number

There is no "version 2" of the "Lesser" General Public License.
It is either "GPL version 2.0" or "Lesser GPL version 2.1".
This patch replaces all occurrences of "Lesser GPL version 2" with
"Lesser GPL version 2.1" in comment section.

Signed-off-by: Chetan Pant <chetan4windows@gmail.com>
Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20201014134033.14095-1-chetan4windows@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

show more ...

Use OBJECT_DECLARE_SIMPLE_TYPE when possible

This converts existing DECLARE_INSTANCE_CHECKER usage to
OBJECT_DECLARE_SIMPLE_TYPE when possible.

$ ./scripts/codeconverter/converter.py -i \
--patte

Use OBJECT_DECLARE_SIMPLE_TYPE when possible

This converts existing DECLARE_INSTANCE_CHECKER usage to
OBJECT_DECLARE_SIMPLE_TYPE when possible.

$ ./scripts/codeconverter/converter.py -i \
--pattern=AddObjectDeclareSimpleType $(git grep -l '' -- '*.[ch]')

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Paul Durrant <paul@xen.org>
Message-Id: <20200916182519.415636-6-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

show more ...

Use DECLARE_*CHECKER* macros

Generated using:

$ ./scripts/codeconverter/converter.py -i \
--pattern=TypeCheckMacro $(git grep -l '' -- '*.[ch]')

Reviewed-by: Daniel P. Berrangé <berrange@redha

Use DECLARE_*CHECKER* macros

Generated using:

$ ./scripts/codeconverter/converter.py -i \
--pattern=TypeCheckMacro $(git grep -l '' -- '*.[ch]')

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-12-ehabkost@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-13-ehabkost@redhat.com>
Message-Id: <20200831210740.126168-14-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

show more ...

Move QOM typedefs and add missing includes

Some typedefs and macros are defined after the type check macros.
This makes it difficult to automatically replace their
definitions with OBJECT_DECLARE_TY

Move QOM typedefs and add missing includes

Some typedefs and macros are defined after the type check macros.
This makes it difficult to automatically replace their
definitions with OBJECT_DECLARE_TYPE.

Patch generated using:

$ ./scripts/codeconverter/converter.py -i \
--pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]')

which will split "typdef struct { ... } TypedefName"
declarations.

Followed by:

$ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \
$(git grep -l '' -- '*.[ch]')

which will:
- move the typedefs and #defines above the type check macros
- add missing #include "qom/object.h" lines if necessary

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-9-ehabkost@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-10-ehabkost@redhat.com>
Message-Id: <20200831210740.126168-11-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

show more ...

Clean up ill-advised or unusual header guards

Cleaned up with scripts/clean-header-guards.pl.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>

io: fix description of @errp parameter initialization

The "Error **errp" parameters must be NULL initialized
not uninitialized.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>

io: add QIOChannelCommand class

Add a QIOChannel subclass that is capable of performing I/O
to/from a separate process, via a pair of pipes. The command
can be used for unidirectional or bi-directio

io: add QIOChannelCommand class

Add a QIOChannel subclass that is capable of performing I/O
to/from a separate process, via a pair of pipes. The command
can be used for unidirectional or bi-directional I/O.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>

show more ...