linux-user: Move tswap_siginfo out of target code

Move tswap_siginfo from target code to handle_pending_signal. This will
allow some cleanups and having the siginfo ready to be used in gdbstub.

Sig

linux-user: Move tswap_siginfo out of target code

Move tswap_siginfo from target code to handle_pending_signal. This will
allow some cleanups and having the siginfo ready to be used in gdbstub.

Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240309030901.1726211-3-gustavo.romero@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>

show more ...

linux-user: Move tswap_siginfo out of target code

Move tswap_siginfo from target code to handle_pending_signal. This will
allow some cleanups and having the siginfo ready to be used in gdbstub.

Sig

linux-user: Move tswap_siginfo out of target code

Move tswap_siginfo from target code to handle_pending_signal. This will
allow some cleanups and having the siginfo ready to be used in gdbstub.

Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240309030901.1726211-3-gustavo.romero@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>

show more ...

linux-user: Move tswap_siginfo out of target code

Move tswap_siginfo from target code to handle_pending_signal. This will
allow some cleanups and having the siginfo ready to be used in gdbstub.

Sig

linux-user: Move tswap_siginfo out of target code

Move tswap_siginfo from target code to handle_pending_signal. This will
allow some cleanups and having the siginfo ready to be used in gdbstub.

Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240309030901.1726211-3-gustavo.romero@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>

show more ...

linux-user: Rename TARGET_QEMU_ESIGRETURN to QEMU_ESIGRETURN

This value is fully internal to qemu, and so is not a TARGET define.

Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mat

linux-user: Rename TARGET_QEMU_ESIGRETURN to QEMU_ESIGRETURN

This value is fully internal to qemu, and so is not a TARGET define.

Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

linux-user/microblaze: Implement setup_sigtramp

Create and record the rt signal trampoline.

Cc: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Si

linux-user/microblaze: Implement setup_sigtramp

Create and record the rt signal trampoline.

Cc: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210929130553.121567-14-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

show more ...

linux-user: Split linux-user internals out of qemu.h

qemu.h is included in various non-linux-user files (which
mostly want the TaskState struct and the functions for
doing usermode access to guest a

linux-user: Split linux-user internals out of qemu.h

qemu.h is included in various non-linux-user files (which
mostly want the TaskState struct and the functions for
doing usermode access to guest addresses like lock_user(),
unlock_user(), get_user*(), etc).

Split out the parts that are only used in linux-user itself
into a new user-internals.h. This leaves qemu.h with basically
three things:
* the definition of the TaskState struct
* the user-access functions and macros
* do_brk()
all of which are needed by code outside linux-user that
includes qemu.h.

The addition of all the extra #include lines was done with
sed -i '/include.*qemu\.h/a #include "user-internals.h"' $(git grep -l 'include.*qemu\.h' linux-user)
(and then undoing the change to fpa11.h).

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210908154405.15417-8-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

show more ...

linux-user: Pass CPUArchState to target_restore_altstack

In most cases we were already passing get_sp_from_cpustate
directly to the function. In other cases, we were passing
a local variable which

linux-user: Pass CPUArchState to target_restore_altstack

In most cases we were already passing get_sp_from_cpustate
directly to the function. In other cases, we were passing
a local variable which already contained the same value.
In the rest of the cases, we were passing the stack pointer
out of env directly.

Reviewed by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210426025334.1168495-5-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

show more ...

linux-user: Use target_restore_altstack in all sigreturn

Note that target_restore_altstack uses the host memory
pointer that we have already verified, so TARGET_EFAULT
is not a possible return value

linux-user: Use target_restore_altstack in all sigreturn

Note that target_restore_altstack uses the host memory
pointer that we have already verified, so TARGET_EFAULT
is not a possible return value.

Note that using -EFAULT was a bug.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210426025334.1168495-3-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

show more ...

linux-user/microblaze: Remove non-rt signal frames

The microblaze kernel does not support these, and uses
only rt style signal frames.

Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Revie

linux-user/microblaze: Remove non-rt signal frames

The microblaze kernel does not support these, and uses
only rt style signal frames.

Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

linux-user/microblaze: Implement rt signal frames

Allows microblaze to pass tests/tcg/multiarch/linux-test.c.

Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Edgar E. Iglesias

linux-user/microblaze: Implement rt signal frames

Allows microblaze to pass tests/tcg/multiarch/linux-test.c.

Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

target/microblaze: Split out PC from env->sregs

Begin eliminating the sregs array in favor of individual members.
Does not correct the width of pc, yet.

Tested-by: Edgar E. Iglesias <edgar.iglesias

target/microblaze: Split out PC from env->sregs

Begin eliminating the sregs array in favor of individual members.
Does not correct the width of pc, yet.

Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

linux-user: Do not report "syscall not implemented" by default

This can still be reported using the "-d unimp" command line option.

Code change produced with:

git ls-files linux-user | \
xargs

linux-user: Do not report "syscall not implemented" by default

This can still be reported using the "-d unimp" command line option.

Code change produced with:

git ls-files linux-user | \
xargs sed -i -E 's/fprintf\(stderr,\s?(".*not implemented\\n")\);/qemu_log_mask(LOG_UNIMP, \1);/g'

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180706155127.7483-3-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

show more ...

linux-user: move get_sp_from_cpustate() to target_cpu.h

Remove useless includes
Fix HPPA include guard.

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Acked-by: Richard Henderson <richard.hender

linux-user: move get_sp_from_cpustate() to target_cpu.h

Remove useless includes
Fix HPPA include guard.

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180529194207.31503-9-laurent@vivier.eu>

show more ...

linux-user: introduce target_sigsp() and target_save_altstack()

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <201804111

linux-user: introduce target_sigsp() and target_save_altstack()

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180411192347.30228-1-laurent@vivier.eu>

show more ...

linux-user: move microblaze signal.c parts to microblaze directory

No code change, only move code from signal.c to
microblaze/signal.c, except adding includes and
exporting setup_frame() and setup_r

linux-user: move microblaze signal.c parts to microblaze directory

No code change, only move code from signal.c to
microblaze/signal.c, except adding includes and
exporting setup_frame() and setup_rt_frame().

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180424192635.6027-6-laurent@vivier.eu>

show more ...

linux-user: create a dummy per arch signal.c

Create a signal-common.h for future use by these new files
and use it in the existing signal.c

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewe

linux-user: create a dummy per arch signal.c

Create a signal-common.h for future use by these new files
and use it in the existing signal.c

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180424192635.6027-2-laurent@vivier.eu>

show more ...