pc-bios/meson: Add hppa-firmware64.img blob

Add the missing 64-bit hppa firmware blob so that it gets installed.

Signed-off-by: Helge Deller <deller@gmx.de>
Fixes: 7c0dfcf9395e ("target/hppa: Updat

pc-bios/meson: Add hppa-firmware64.img blob

Add the missing 64-bit hppa firmware blob so that it gets installed.

Signed-off-by: Helge Deller <deller@gmx.de>
Fixes: 7c0dfcf9395e ("target/hppa: Update SeaBIOS-hppa to version 16")
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

meson: compile bundled device trees

If dtc is available, compile the .dts files in the pc-bios directory
instead of using the precompiled binaries.

Reviewed-by: Richard Henderson <richard.henderson

meson: compile bundled device trees

If dtc is available, compile the .dts files in the pc-bios directory
instead of using the precompiled binaries.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

hw/misc/sga: Remove the deprecated "sga" device

It's been deprecated since QEMU v6.2, so it should be OK to
finally remove this now.

Message-Id: <20230209161540.1054669-1-thuth@redhat.com>
Reviewed

hw/misc/sga: Remove the deprecated "sga" device

It's been deprecated since QEMU v6.2, so it should be OK to
finally remove this now.

Message-Id: <20230209161540.1054669-1-thuth@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

show more ...

hw/misc/sga: Remove the deprecated "sga" device

It's been deprecated since QEMU v6.2, so it should be OK to
finally remove this now.

Message-Id: <20230209161540.1054669-1-thuth@redhat.com>
Reviewed

hw/misc/sga: Remove the deprecated "sga" device

It's been deprecated since QEMU v6.2, so it should be OK to
finally remove this now.

Message-Id: <20230209161540.1054669-1-thuth@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

show more ...

datadir: Use bundle mechanism

softmmu/datadir.c had its own implementation to find files in the
build tree, but now bundle mechanism provides the unified
implementation which works for datadir and t

datadir: Use bundle mechanism

softmmu/datadir.c had its own implementation to find files in the
build tree, but now bundle mechanism provides the unified
implementation which works for datadir and the other files.

Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-Id: <20220624145039.49929-4-akihiko.odaki@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

datadir: Use bundle mechanism

softmmu/datadir.c had its own implementation to find files in the
build tree, but now bundle mechanism provides the unified
implementation which works for datadir and t

datadir: Use bundle mechanism

softmmu/datadir.c had its own implementation to find files in the
build tree, but now bundle mechanism provides the unified
implementation which works for datadir and the other files.

Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-Id: <20220624145039.49929-4-akihiko.odaki@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

datadir: Use bundle mechanism

softmmu/datadir.c had its own implementation to find files in the
build tree, but now bundle mechanism provides the unified
implementation which works for datadir and t

datadir: Use bundle mechanism

softmmu/datadir.c had its own implementation to find files in the
build tree, but now bundle mechanism provides the unified
implementation which works for datadir and the other files.

Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-Id: <20220624145039.49929-4-akihiko.odaki@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

datadir: Use bundle mechanism

softmmu/datadir.c had its own implementation to find files in the
build tree, but now bundle mechanism provides the unified
implementation which works for datadir and t

datadir: Use bundle mechanism

softmmu/datadir.c had its own implementation to find files in the
build tree, but now bundle mechanism provides the unified
implementation which works for datadir and the other files.

Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-Id: <20220624145039.49929-4-akihiko.odaki@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

configure, meson: move symlinking of ROMs to meson

This is useful because pc-bios/meson.build already has a list of all ROM
files, and thus does not need to use wildcards. The problems with
wildcar

configure, meson: move symlinking of ROMs to meson

This is useful because pc-bios/meson.build already has a list of all ROM
files, and thus does not need to use wildcards. The problems with
wildcards are mentioned above the definition of the LINKS variable,
but then the recommendation is disattended.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220517092616.1272238-6-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220527153603.887929-17-alex.bennee@linaro.org>

show more ...

configure, meson: move symlinking of ROMs to meson

This is useful because pc-bios/meson.build already has a list of all ROM
files, and thus does not need to use wildcards. The problems with
wildcar

configure, meson: move symlinking of ROMs to meson

This is useful because pc-bios/meson.build already has a list of all ROM
files, and thus does not need to use wildcards. The problems with
wildcards are mentioned above the definition of the LINKS variable,
but then the recommendation is disattended.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220517092616.1272238-6-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220527153603.887929-17-alex.bennee@linaro.org>

show more ...

spapr/vof: Install rom and nvram binaries

This installs VOF-related binaries (the firmware and the preformatted
NVRAM) as those were left out when the VOF was submitted initially.

Fixes: fc8c745d50

spapr/vof: Install rom and nvram binaries

This installs VOF-related binaries (the firmware and the preformatted
NVRAM) as those were left out when the VOF was submitted initially.

Fixes: fc8c745d5015 ("spapr: Implement Open Firmware client interface")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20220208103751.1587902-1-aik@ozlabs.ru>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

show more ...

roms/opensbi: Remove ELF images

Now that all RISC-V machines can use OpenSBI BIN images, we remove
OpenSBI ELF images and also exclude these images from BIOS build.

Signed-off-by: Anup Patel <apate

roms/opensbi: Remove ELF images

Now that all RISC-V machines can use OpenSBI BIN images, we remove
OpenSBI ELF images and also exclude these images from BIOS build.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

configure: remove unnecessary symlinks

Make pc-bios/meson.build use the files in the source tree as inputs
to bzip2.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pao

configure: remove unnecessary symlinks

Make pc-bios/meson.build use the files in the source tree as inputs
to bzip2.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

optionrom: add a DMA-enabled multiboot ROM

Add a new option rom for the multiboot loader, using DMA transfers to copy
data instead of "rep insb".

This significantly lowers QEMU's startup latency by

optionrom: add a DMA-enabled multiboot ROM

Add a new option rom for the multiboot loader, using DMA transfers to copy
data instead of "rep insb".

This significantly lowers QEMU's startup latency by a factor of about 40,
for example, going from 30sec to 0.8sec when loading modules of 120MB
in size.

Signed-off-by: Marcus Hähnel <marcus.haehnel@kernkonzept.com>
Signed-off-by: Adam Lackorzynski <adam@l4re.org>
[Modified to keep the non-DMA code depending on #ifdef USE_FW_CFG_DMA;
do not write below stack. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

tests: qtest: bios-tables-test depends on the unpacked edk2 ROMs

Skip the test if bzip2 is not available, and run it after they are
uncompressed.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

tests: qtest: bios-tables-test depends on the unpacked edk2 ROMs

Skip the test if bzip2 is not available, and run it after they are
uncompressed.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210923105529.3845741-2-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

meson: unpack edk2 firmware even if --disable-blobs

The edk2 firmware blobs are needed to run bios-tables-test. Unpack
them if any UEFI-enabled target is selected, so that the test can run.
This is

meson: unpack edk2 firmware even if --disable-blobs

The edk2 firmware blobs are needed to run bios-tables-test. Unpack
them if any UEFI-enabled target is selected, so that the test can run.
This is a bit more than is actually necessary, since bios-tables-test
does not run for all UEFI-enabled targets, but it is the easiest
way to write this logic.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210923105529.3845741-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

pc-bios/meson: Only install EDK2 blob firmwares with system emulation

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210122204

pc-bios/meson: Only install EDK2 blob firmwares with system emulation

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210122204441.2145197-4-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

meson.build: Detect bzip2 program

The --enable-bzip2/--disable-bzip2 configure arguments are
somehow misleading, they check for the bzip2 library, not
the bzip2 program.

We need the bzip2 program t

meson.build: Detect bzip2 program

The --enable-bzip2/--disable-bzip2 configure arguments are
somehow misleading, they check for the bzip2 library, not
the bzip2 program.

We need the bzip2 program to install the EDK2 firmware blobs
(see commit 623ef637a2e "configure: Check bzip2 is available").

Check if the bzip2 program in the global meson.build to avoid
the configuration to succeed, but a later when trying to install
the firmware blobs:

../pc-bios/meson.build:5:2: ERROR: Program 'bzip2' not found

Reported-by: John Snow <jsnow@redhat.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Fixes: c8d5450bba3 ("configure: move install_blobs from configure to meson")
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210114174509.2944817-3-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

meson.build: Declare global edk2_targets / install_edk2_blobs variables

Globally declare in the main meson.build:
- the list of EDK2 targets,
- whether the EDK2 blobs have to be installed.

Signed-o

meson.build: Declare global edk2_targets / install_edk2_blobs variables

Globally declare in the main meson.build:
- the list of EDK2 targets,
- whether the EDK2 blobs have to be installed.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210114174509.2944817-2-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

configure: move install_blobs from configure to meson

Move the conditions under which edk2 blobs are decompressed
and installed to pc-bios/meson.build.

Signed-off-by: Paolo Bonzini <pbonzini@redhat

configure: move install_blobs from configure to meson

Move the conditions under which edk2 blobs are decompressed
and installed to pc-bios/meson.build.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

configure: move directory options from config-host.mak to meson

Since installation is not part of Makefiles anymore, Make need not
know the directories anymore. Meson already knows them through
bui

configure: move directory options from config-host.mak to meson

Since installation is not part of Makefiles anymore, Make need not
know the directories anymore. Meson already knows them through
built-in options, do everything using them instead of the config_host
dictionary.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

seabios: add bios-microvm.bin binary

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20200915120909.20838-4-kraxel@redhat.com

microvm: name qboot binary qboot.rom

qboot isn't a bios and shouldnt be named that way.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Phil

microvm: name qboot binary qboot.rom

qboot isn't a bios and shouldnt be named that way.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200915120909.20838-2-kraxel@redhat.com

show more ...

roms: Add virtual Boot ROM for NPCM7xx SoCs

This is a minimalistic boot ROM written specifically for use with QEMU.
It supports loading the second-stage loader from SPI flash into RAM, SMP
boot, and

roms: Add virtual Boot ROM for NPCM7xx SoCs

This is a minimalistic boot ROM written specifically for use with QEMU.
It supports loading the second-stage loader from SPI flash into RAM, SMP
boot, and not much else.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Message-id: 20200911052101.2602693-7-hskinnemoen@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

meson: use meson datadir instead of qemu_datadir

When cross-compiling, by default qemu_datadir is 'c:\Program
Files\QEMU', which is not recognized as being an absolute path, and
meson will end up ad

meson: use meson datadir instead of qemu_datadir

When cross-compiling, by default qemu_datadir is 'c:\Program
Files\QEMU', which is not recognized as being an absolute path, and
meson will end up adding the prefix again.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200826110419.528931-6-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...