tests/docker: run script use realpath instead of readlink

The alpine docker image only comes with busybox, which doesn't have the
'-e' option on its readlink, so change it to 'realpath' to avoid tha

tests/docker: run script use realpath instead of readlink

The alpine docker image only comes with busybox, which doesn't have the
'-e' option on its readlink, so change it to 'realpath' to avoid that
problem.

Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Lucas Mateus Castro (alqotel) <lucas.araujo@eldorado.org.br>
Message-Id: <20220922135516.33627-5-lucas.araujo@eldorado.org.br>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-5-alex.bennee@linaro.org>

show more ...

tests/docker: remove FEATURES env var from templates

In preparation for switching to auto-generated dockerfiles, remove the
FEATURES env variable. The equivalent functionality can be achieved in
mos

tests/docker: remove FEATURES env var from templates

In preparation for switching to auto-generated dockerfiles, remove the
FEATURES env variable. The equivalent functionality can be achieved in
most cases by just looking for existance of a binary.

The cases which don't correspond to binaries are simply dropped because
configure/meson will probe for any requested feature anyway.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210623142245.307776-6-berrange@redhat.com>
Message-Id: <20210709143005.1554-14-alex.bennee@linaro.org>

show more ...

tests/docker: avoid $SHELL invoke bash directly

On some images SHELL is pointing at a limited /bin/sh which doesn't
understand noprofile/norc. Given the run script is running bash just
invoke it dir

tests/docker: avoid $SHELL invoke bash directly

On some images SHELL is pointing at a limited /bin/sh which doesn't
understand noprofile/norc. Given the run script is running bash just
invoke it directly.

This fixes:

$ make docker-test-build@IMAGE DEBUG=1
[...]
+ echo ' ./test-build'
./test-build
+ echo '* Hit Ctrl-D to continue, or type '\''exit 1'\'' to abort'
* Hit Ctrl-D to continue, or type 'exit 1' to abort
+ echo
+ /bin/sh --noprofile --norc
/bin/sh: 0: Illegal option --

Fixes: 2b0c4fa13f3
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>

show more ...

tests/docker: invoke the DEBUG shell with --noprofile/--norc

It's very confusing when things work in the debug shell because the
environment is different from what the test is running. Fix this by
e

tests/docker: invoke the DEBUG shell with --noprofile/--norc

It's very confusing when things work in the debug shell because the
environment is different from what the test is running. Fix this by
ensuring we only have the inherited environment from the run shell.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>

show more ...

docker: Inline "prep_fail" in run script

We don't source common.rc where prep_fail is defined, so spell out the
commands and do what was intended.

Signed-off-by: Fam Zheng <famz@redhat.com>
Message

docker: Inline "prep_fail" in run script

We don't source common.rc where prep_fail is defined, so spell out the
commands and do what was intended.

Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20180326090350.30014-1-famz@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>

show more ...

docker: Fix PATH for ccache

Before bcd7f06f57fb6f780a3e2f7a46c22b6f6c8238aa we source /etc/profile
so the PATH included the right paths to ccache binaries. Now we need to
update $PATH explicitly fro

docker: Fix PATH for ccache

Before bcd7f06f57fb6f780a3e2f7a46c22b6f6c8238aa we source /etc/profile
so the PATH included the right paths to ccache binaries. Now we need to
update $PATH explicitly from run script.

Keep the old /usr/lib around just so that in the future, ccache from 32
bit images will just work.

Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20171018073841.30062-1-famz@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>

show more ...

tests/docker/run: don't source /etc/profile

The usual behaviour of /etc/profile is to set the default PATH for
users. This runs into problems when we have updated PATH in our
dockerfile e.g. to acce

tests/docker/run: don't source /etc/profile

The usual behaviour of /etc/profile is to set the default PATH for
users. This runs into problems when we have updated PATH in our
dockerfile e.g. to access a cross-compiler in a non-standard
location. It shouldn't be needed anyway as we inherit the env from the
image when it was setup.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
CC: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20170926133622.14991-1-alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Fam Zheng <famz@redhat.com>

show more ...

docker: Fix test-mingw

Feature "dtc" is explicitly required by test-mingw, but is not detected
by the run script since we switched to archive-source.sh in b7f404201e4.
Since it isn't available in th

docker: Fix test-mingw

Feature "dtc" is explicitly required by test-mingw, but is not detected
by the run script since we switched to archive-source.sh in b7f404201e4.
Since it isn't available in the Fedora image which runs this test on
patchew, the way we get dtc is still from submodule.

archive-source.sh takes care of bundling the submodule files already, so
what we need to do is just checking if files are there. Makefile is
chosen because it is one that is unlikely to get renamed in the future.

Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170925082913.22089-1-famz@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Fam Zheng <famz@redhat.com>

show more ...

docker: Drop 'set -e' from run script

Signed-off-by: Fam Zheng <famz@redhat.com>

docker: Use archive-source.py

Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>

tests/docker: Clean up paths

The 'run' script already creats src, build and install directories under
$TEST_DIR, use it in common.rc.

Also the tests always run from $QEMU_SRC/tests/docker, so use a

tests/docker: Clean up paths

The 'run' script already creats src, build and install directories under
$TEST_DIR, use it in common.rc.

Also the tests always run from $QEMU_SRC/tests/docker, so use a relative
$CMD string.

Message-Id: <20170817035721.11064-1-famz@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>

show more ...

docker: exec $CMD

This is the last command to run (unless DEBUG), make it 'exec' to
simplify the process tree.

Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <1474429768-25027-10-git-send-e

docker: exec $CMD

This is the last command to run (unless DEBUG), make it 'exec' to
simplify the process tree.

Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <1474429768-25027-10-git-send-email-famz@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>

show more ...

docker: Support showing environment information

Add a make variable SHOW_ENV. When it's set to non empty, print the
package information and environment variables.

Signed-off-by: Fam Zheng <famz@red

docker: Support showing environment information

Add a make variable SHOW_ENV. When it's set to non empty, print the
package information and environment variables.

Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <1474429768-25027-8-git-send-email-famz@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>

show more ...

docker: Fix exit code if $CMD failed

Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1468934445-32183-8-git-send-email-famz@redhat.com

docker: More sensible run script

It is very easy to figure out current directory and bash option from the
execution, so do less in the Makefile invocation command line, and
figure both options in th

docker: More sensible run script

It is very easy to figure out current directory and bash option from the
execution, so do less in the Makefile invocation command line, and
figure both options in the script.

This makes the next patch easier.

Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1468934445-32183-7-git-send-email-famz@redhat.com

show more ...

docker: Add test runner

It's better to have a launcher for all tests, to make it easier to
initialize and manage the environment.

If "DEBUG=1" a shell prompt will show up before the test runs.

Re

docker: Add test runner

It's better to have a launcher for all tests, to make it easier to
initialize and manage the environment.

If "DEBUG=1" a shell prompt will show up before the test runs.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1464755128-32490-7-git-send-email-famz@redhat.com

show more ...