hmp: Remove deprecated 'singlestep' command

This command has been deprecated before the 8.1 release,
in commit e9ccfdd91d ("hmp: Add 'one-insn-per-tb' command
equivalent to 'singlestep'"). Time to d

hmp: Remove deprecated 'singlestep' command

This command has been deprecated before the 8.1 release,
in commit e9ccfdd91d ("hmp: Add 'one-insn-per-tb' command
equivalent to 'singlestep'"). Time to drop it.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: "Dr. David Alan Gilbert" <dave@treblig.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240117151430.29235-3-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

show more ...

tests/qtest/test-hmp: Fix migrate_set_parameter xbzrle-cache-size test

The command always fails with "Error: Parameter 'xbzrle_cache_size'
expects a power of two no less than the target page size".

tests/qtest/test-hmp: Fix migrate_set_parameter xbzrle-cache-size test

The command always fails with "Error: Parameter 'xbzrle_cache_size'
expects a power of two no less than the target page size". The test
passes anyway. Change the argument from 1 to 64k to make the test a
bit more useful.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

show more ...

docs tests: Fix use of migrate_set_parameter

docs/multi-thread-compression.txt uses parameter names with
underscores instead of dashes. Wrong since day one.

docs/rdma.txt, tests/qemu-iotests/181,

docs tests: Fix use of migrate_set_parameter

docs/multi-thread-compression.txt uses parameter names with
underscores instead of dashes. Wrong since day one.

docs/rdma.txt, tests/qemu-iotests/181, and tests/qtest/test-hmp.c are
wrong the same way since commit cbde7be900d2 (v6.0.0). Hard to see,
as test-hmp doesn't check whether the commands work, and iotest 181
appears to be unaffected.

Fixes: 263170e679df (docs: Add a doc about multiple thread compression)
Fixes: cbde7be900d2 (migrate: remove QMP/HMP commands for speed, downtime and cache size)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

show more ...

tests/qtest/test-hmp: Fix migrate_set_parameter xbzrle-cache-size test

The command always fails with "Error: Parameter 'xbzrle_cache_size'
expects a power of two no less than the target page size".

tests/qtest/test-hmp: Fix migrate_set_parameter xbzrle-cache-size test

The command always fails with "Error: Parameter 'xbzrle_cache_size'
expects a power of two no less than the target page size". The test
passes anyway. Change the argument from 1 to 64k to make the test a
bit more useful.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

show more ...

docs tests: Fix use of migrate_set_parameter

docs/multi-thread-compression.txt uses parameter names with
underscores instead of dashes. Wrong since day one.

docs/rdma.txt, tests/qemu-iotests/181,

docs tests: Fix use of migrate_set_parameter

docs/multi-thread-compression.txt uses parameter names with
underscores instead of dashes. Wrong since day one.

docs/rdma.txt, tests/qemu-iotests/181, and tests/qtest/test-hmp.c are
wrong the same way since commit cbde7be900d2 (v6.0.0). Hard to see,
as test-hmp doesn't check whether the commands work, and iotest 181
appears to be unaffected.

Fixes: 263170e679df (docs: Add a doc about multiple thread compression)
Fixes: cbde7be900d2 (migrate: remove QMP/HMP commands for speed, downtime and cache size)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

show more ...

tests/qtest/test-hmp: Fix migrate_set_parameter xbzrle-cache-size test

The command always fails with "Error: Parameter 'xbzrle_cache_size'
expects a power of two no less than the target page size".

tests/qtest/test-hmp: Fix migrate_set_parameter xbzrle-cache-size test

The command always fails with "Error: Parameter 'xbzrle_cache_size'
expects a power of two no less than the target page size". The test
passes anyway. Change the argument from 1 to 64k to make the test a
bit more useful.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

show more ...

docs tests: Fix use of migrate_set_parameter

docs/multi-thread-compression.txt uses parameter names with
underscores instead of dashes. Wrong since day one.

docs/rdma.txt, tests/qemu-iotests/181,

docs tests: Fix use of migrate_set_parameter

docs/multi-thread-compression.txt uses parameter names with
underscores instead of dashes. Wrong since day one.

docs/rdma.txt, tests/qemu-iotests/181, and tests/qtest/test-hmp.c are
wrong the same way since commit cbde7be900d2 (v6.0.0). Hard to see,
as test-hmp doesn't check whether the commands work, and iotest 181
appears to be unaffected.

Fixes: 263170e679df (docs: Add a doc about multiple thread compression)
Fixes: cbde7be900d2 (migrate: remove QMP/HMP commands for speed, downtime and cache size)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

show more ...

hmp: Add 'one-insn-per-tb' command equivalent to 'singlestep'

The 'singlestep' HMP command is confusing, because it doesn't
actually have anything to do with single-stepping the CPU. What it
does d

hmp: Add 'one-insn-per-tb' command equivalent to 'singlestep'

The 'singlestep' HMP command is confusing, because it doesn't
actually have anything to do with single-stepping the CPU. What it
does do is force TCG emulation to put one guest instruction in each
TB, which can be useful in some situations.

Create a new HMP command 'one-insn-per-tb', so we can document that
'singlestep' is just a deprecated synonym for it, and eventually
perhaps drop it.

We aren't obliged to do deprecate-and-drop for HMP commands,
but it's easy enough to do so, so we do.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230417164041.684562-9-peter.maydell@linaro.org

show more ...

hmp: Add 'one-insn-per-tb' command equivalent to 'singlestep'

The 'singlestep' HMP command is confusing, because it doesn't
actually have anything to do with single-stepping the CPU. What it
does d

hmp: Add 'one-insn-per-tb' command equivalent to 'singlestep'

The 'singlestep' HMP command is confusing, because it doesn't
actually have anything to do with single-stepping the CPU. What it
does do is force TCG emulation to put one guest instruction in each
TB, which can be useful in some situations.

Create a new HMP command 'one-insn-per-tb', so we can document that
'singlestep' is just a deprecated synonym for it, and eventually
perhaps drop it.

We aren't obliged to do deprecate-and-drop for HMP commands,
but it's easy enough to do so, so we do.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230417164041.684562-9-peter.maydell@linaro.org

show more ...

tests/qtest/test-hmp: Improve the check for verbose mode

Running the test-hmp with V=2 up to V=9 runs the test in verbose mode,
but running for example with V=10 falls back to non-verbose mode ...
I

tests/qtest/test-hmp: Improve the check for verbose mode

Running the test-hmp with V=2 up to V=9 runs the test in verbose mode,
but running for example with V=10 falls back to non-verbose mode ...
Improve this oddity by properly treating the argument as a number.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230109101306.271444-1-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

show more ...

tests/qtest/test-hmp: Improve the check for verbose mode

Running the test-hmp with V=2 up to V=9 runs the test in verbose mode,
but running for example with V=10 falls back to non-verbose mode ...
I

tests/qtest/test-hmp: Improve the check for verbose mode

Running the test-hmp with V=2 up to V=9 runs the test in verbose mode,
but running for example with V=10 falls back to non-verbose mode ...
Improve this oddity by properly treating the argument as a number.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230109101306.271444-1-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

show more ...

tests/qtest/test-hmp: Improve the check for verbose mode

Running the test-hmp with V=2 up to V=9 runs the test in verbose mode,
but running for example with V=10 falls back to non-verbose mode ...
I

tests/qtest/test-hmp: Improve the check for verbose mode

Running the test-hmp with V=2 up to V=9 runs the test in verbose mode,
but running for example with V=10 falls back to non-verbose mode ...
Improve this oddity by properly treating the argument as a number.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230109101306.271444-1-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

show more ...

tests/qtest/test-hmp: Improve the check for verbose mode

Running the test-hmp with V=2 up to V=9 runs the test in verbose mode,
but running for example with V=10 falls back to non-verbose mode ...
I

tests/qtest/test-hmp: Improve the check for verbose mode

Running the test-hmp with V=2 up to V=9 runs the test in verbose mode,
but running for example with V=10 falls back to non-verbose mode ...
Improve this oddity by properly treating the argument as a number.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230109101306.271444-1-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

show more ...

tests: move libqtest.h back under qtest/

Since commit a2ce7dbd917 ("meson: convert tests/qtest to meson"),
libqtest.h is under libqos/ directory, while libqtest.c is still in
qtest/. Move back to it

tests: move libqtest.h back under qtest/

Since commit a2ce7dbd917 ("meson: convert tests/qtest to meson"),
libqtest.h is under libqos/ directory, while libqtest.c is still in
qtest/. Move back to its original location to avoid mixing with libqos/.

Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>

show more ...

migrate: remove QMP/HMP commands for speed, downtime and cache size

The generic 'migrate_set_parameters' command handle all types of param.

Only the QMP commands were documented in the deprecations

migrate: remove QMP/HMP commands for speed, downtime and cache size

The generic 'migrate_set_parameters' command handle all types of param.

Only the QMP commands were documented in the deprecations page, but the
rationale for deprecating applies equally to HMP, and the replacements
exist. Furthermore the HMP commands are just shims to the QMP commands,
so removing the latter breaks the former unless they get re-implemented.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>

show more ...

cphp: remove deprecated cpu-add command(s)

These were deprecated since 4.0, remove both HMP and QMP variants.

Users should use device_add command instead. To get list of
possible CPUs and options,

cphp: remove deprecated cpu-add command(s)

These were deprecated since 4.0, remove both HMP and QMP variants.

Users should use device_add command instead. To get list of
possible CPUs and options, use 'info hotpluggable-cpus' HMP
or query-hotpluggable-cpus QMP command.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200915120403.1074579-1-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

meson: convert tests/qtest to meson

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

tests/qtest: Unify the test for the xenfv and xenpv machines

We have the same check in three places. Let's unify it in a central
place instead.

Message-Id: <20200622104339.21000-1-thuth@redhat.com>

tests/qtest: Unify the test for the xenfv and xenpv machines

We have the same check in three places. Let's unify it in a central
place instead.

Message-Id: <20200622104339.21000-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

show more ...

hmp: Implement qom-get HMP command

This started off as Andreas Färber's implementation from
March 2015, but after feedback from Paolo and Markus it morphed into
using the json output which handles s

hmp: Implement qom-get HMP command

This started off as Andreas Färber's implementation from
March 2015, but after feedback from Paolo and Markus it morphed into
using the json output which handles structs reasonably.

Use with qom-list to find the members of an object.

(qemu) qom-get /backend/console[0]/device/vga.rom[0] size
65536
(qemu) qom-get /machine smm
"auto"
(qemu) qom-get /machine rtc-time
{
"tm_year": 120,
"tm_sec": 51,
"tm_hour": 9,
"tm_min": 50,
"tm_mon": 4,
"tm_mday": 20
}
(qemu) qom-get /machine frob
Error: Property '.frob' not found

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20200520151108.160598-2-dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

show more ...

piix: fix xenfv regression, add compat machine xenfv-4.2

With QEMU 4.0 an incompatible change was added to pc_piix, which makes it
practical impossible to migrate domUs started with qemu2 or qemu3 t

piix: fix xenfv regression, add compat machine xenfv-4.2

With QEMU 4.0 an incompatible change was added to pc_piix, which makes it
practical impossible to migrate domUs started with qemu2 or qemu3 to
newer qemu versions. Commit 7fccf2a06890e3bc3b30e29827ad3fb93fe88fea
added and enabled a new member "smbus_no_migration_support". In commit
4ab2f2a8aabfea95cc53c64e13b3f67960b27fdf the vmstate_acpi got new
elements, which are conditionally filled. As a result, an incoming
migration expected smbus related data unless smbus migration was
disabled for a given MachineClass. Since first commit forgot to handle
'xenfv', domUs started with QEMU 4.x are incompatible with their QEMU
siblings.

Using other existing machine types, such as 'pc-i440fx-3.1', is not
possible because 'xenfv' creates the 'xen-platform' PCI device at
00:02.0, while all other variants to run a domU would create it at
00:04.0.

To cover both the existing and the broken case of 'xenfv' in a single
qemu binary, a new compatibility variant of 'xenfv-4.2' must be added
which targets domUs started with qemu 4.2. The existing 'xenfv' restores
compatibility of QEMU 5.x with qemu 3.1.

Host admins who started domUs with QEMU 4.x (preferrable QEMU 4.2)
have to use a wrapper script which appends '-machine xenfv-4.2' to
the device-model command line. This is only required if there is no
maintenance window which allows to temporary shutdown the domU and
restart it with a fixed device-model.

The wrapper script is as simple as this:
#!/bin/sh
exec /usr/bin/qemu-system-i386 "$@" -machine xenfv-4.2

With xl this script will be enabled with device_model_override=, see
xl.cfg(5). To live migrate a domU, adjust the existing domU.cfg and pass
it to xl migrate or xl save/restore:
xl migrate -C new-domU.cfg domU remote-host
xl save domU CheckpointFile new-domU.cfg
xl restore new-domU.cfg CheckpointFile

With libvirt this script will be enabled with the <emulator> element in
domU.xml. Use 'virsh edit' prior 'virsh migrate' to replace the existing
<emulator> element to point it to the wrapper script.

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Message-Id: <20200327151841.13877-1-olaf@aepfle.de>
[Adjust tests for blacklisted machine types, simplifying the one in
qom-test. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

test: Move qtests to a separate directory

The tests directory itself is pretty overcrowded, and it's hard to
see which test belongs to which test subsystem (unit, qtest, ...).
Let's move the qtests

test: Move qtests to a separate directory

The tests directory itself is pretty overcrowded, and it's hard to
see which test belongs to which test subsystem (unit, qtest, ...).
Let's move the qtests to a separate folder for more clarity.

Message-Id: <20191218103059.11729-6-thuth@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

show more ...