[USB] Update the names of new USB drivers

Git conversion: Make reactos the root directory, move rosapps, rostests, wallpapers into modules, and delete rossubsys.

Create the AHCI branch for Aman's work

svn path=/branches/GSoC_2016/AHCI/; revision=71203

Create a branch for console restructuration work.

svn path=/branches/condrv_restructure/; revision=63104

[SHELL/EXPERIMENTS]
* Create a branch for some evul shell experiments.

svn path=/branches/shell-experiments/; revision=61927

Create a branch for Aleksandar Andrejevic for his work on NTVDM. See http://jira.reactos.org/browse/CORE-7250 for more details.

svn path=/branches/ntvdm/; revision=59241

Create this branch to work on loading of different Kernel-Debugger DLL providers, and see whether it is possible to move KDBG from ntoskrnl to a new DLL called, say, KDROSDBG.DLL.

The idea then woul

Create this branch to work on loading of different Kernel-Debugger DLL providers, and see whether it is possible to move KDBG from ntoskrnl to a new DLL called, say, KDROSDBG.DLL.

The idea then would be to have the following behaviour (when specifying the following options in the kernel command line):

/DEBUGPORT=COMi --> load KDCOM.DLL and use COMi port (i == 1,2,3,4) if possible.
/DEBUGPORT=FOO --> load KDFOO.DLL (useful for KDUSB.DLL, KD1394.DLL, KDBAZIS.DLL for VirtualKD, etc...)
/DEBUGPORT=ROSDBG:[COMi|SCREEN|FILE|GDB|...] --> load KDROSDBG.DLL which contains the ROS kernel debugger, and use COMi or SCREEN or... as output port.

svn path=/branches/kd++/; revision=58883

show more ...

Branching for 0.3.15 release after two days of no response from a certain sphere of plasma.

svn path=/branches/ReactOS-0.3.15/; revision=58636

Create a branch for working on csrss and co.

svn path=/branches/ros-csrss/; revision=57561

[USBOHCI]
- Implement reseting pipe and clear pipe stall

svn path=/branches/usb-bringup-trunk/; revision=55394

[USBOHCI]
- Check if the transfer descriptors reported errors and propagate the error in the urb status field
- OHCI now reports error which the class driver are handling
- Allocate device descriptor

[USBOHCI]
- Check if the transfer descriptors reported errors and propagate the error in the urb status field
- OHCI now reports error which the class driver are handling
- Allocate device descriptor from non paged pool to prevent possible alignment problems
- Fix checking of completed transfer descriptors
- Fix double freeing of descriptors
- Cleanup endpoints when the halted bit is set by the host controllers
- Check for the endpoint direction in the data descriptor
- Setup descriptor needs buffer rounding set

svn path=/branches/usb-bringup-trunk/; revision=55389

show more ...

[USBOHCI]
- Fix StartController() to perform initialization according to OHCI spec
- Fixes the infamous OHCI initialization hang on real hardware

svn path=/branches/usb-bringup-trunk/; revision=55181

[USBOHCI]
- More traces to fix isochronous problem
- Fix broken assert found by mjmartin

svn path=/branches/usb-bringup/; revision=52004

[USBOHCI]
- Fix OHCI_ISO_TD structure. Fixes host system crashes in Windows XP
- Fix multiple bugs in isochronous transfer implementation
- Still not yet working, as the interrupt completion is not f

[USBOHCI]
- Fix OHCI_ISO_TD structure. Fixes host system crashes in Windows XP
- Fix multiple bugs in isochronous transfer implementation
- Still not yet working, as the interrupt completion is not fired yet

svn path=/branches/usb-bringup/; revision=51998

show more ...

[USBOHCI]
- Implement function to retrieve isochronous head endpoint descriptor
- Implement function to retrieve current frame number
- Set isochronous descriptor flag for head endpoint
- Implement r

[USBOHCI]
- Implement function to retrieve isochronous head endpoint descriptor
- Implement function to retrieve current frame number
- Set isochronous descriptor flag for head endpoint
- Implement retrieve device status for devices
- Implement retrieve class status from device
- Partly implement isochronous descriptor handling in usb queue
- Start implementing isochronous transfers in ISUBRequest
- Code currently not tested as the Virtual Machine with XP + ReactOS usbohci driver brings down the host system when starting the iso transfers. Ironically it crashes in MS usbohci driver


svn path=/branches/usb-bringup/; revision=51957

show more ...

[USBOHCI]
- Set up periodic threshold (90 %)
- Add function to retrieve interrupt endpoints
- Add function to retrieve specific descriptors from interface. These are used by HID devices such as mice

[USBOHCI]
- Set up periodic threshold (90 %)
- Add function to retrieve interrupt endpoints
- Add function to retrieve specific descriptors from interface. These are used by HID devices such as mice / keyboards
- Add function to retrieve interrupt interval
- Enqueue all endpoint descriptors at the end of the associated queue
- Only notify hardware of insertion when it is an bulk / control request
- Scan interrupt endpoint list to find the completed transfer descriptor
- Add debugging function to print out linked endpoint descriptors
- Interrupt transfers are now implemented.
- Tested in Windows XP SP3 + Vbox 4.04 + Microsoft 5-Button Mouse. The HID mouse installs, initializes and starts up. Unfortunately the mouse does not work as expected yet

svn path=/branches/usb-bringup/; revision=51922

show more ...

[USBOHCI]
- Remove dead code
- Silence traces
- Pass status & DoneHead as parameters to dpc routine
- Move IUSBRequest cleanup code into new function and use it for bulk / control transfer cleanup
-

[USBOHCI]
- Remove dead code
- Silence traces
- Pass status & DoneHead as parameters to dpc routine
- Move IUSBRequest cleanup code into new function and use it for bulk / control transfer cleanup
- Fix bugs in AllocateEndpointDescriptor. It did not take the device address into account. It also did not respect the direction of the descriptor
- Implement support for bulk transfer requests
- Handle irp completion in CompletionCallback
- Tested in Windows XP SP3 + Vbox 4.04 + USB2.0 disabled + ReactOS usbstor + USB mass storage device
- OHCI Mass storage support is now also ready
- Next interrupt transfers

svn path=/branches/usb-bringup/; revision=51917

show more ...

[USBOHCI]
- Add sanity checks
- Preserve command status value when notifying the hc that a control / bulk endpoint was added
- Re-enable root hub notification interrupt when reset port has been comp

[USBOHCI]
- Add sanity checks
- Preserve command status value when notifying the hc that a control / bulk endpoint was added
- Re-enable root hub notification interrupt when reset port has been completed
- Dispatch processing to USBQeueu when DoneHead event arrives
- Scan endpoints to find the logical endpoint which was completed by the hardware
- Signal completion to IUSBRequest by calling CompletionCallback
- Create a final transfer descriptor which is linked to the endpoint descriptor
- Control transfers now appear to be working (Device retrieves device descriptor / configuration descriptor and succeeds in setting device address)
- Configuration parsing code needs more work now (currently fails there due to invalid / unexpected configuration descriptor from device)

svn path=/branches/usb-bringup/; revision=51888

show more ...

[USBOHCI]
- Enable global power mode
- Wait untill reset is complete
- Clear reset complete bit when reset is done
- Enable port
- Reset port now works
- USBOHCI still hangs after adding first contro

[USBOHCI]
- Enable global power mode
- Wait untill reset is complete
- Clear reset complete bit when reset is done
- Enable port
- Reset port now works
- USBOHCI still hangs after adding first control request, needs more investigation

svn path=/branches/usb-bringup/; revision=51883

show more ...

[USBOHCI]
- Start implementing control transfers
- Move initialization of usb queue after the bulk / control head endpoints have been created
- Add interface functions to retrieve bulk / control head

[USBOHCI]
- Start implementing control transfers
- Move initialization of usb queue after the bulk / control head endpoints have been created
- Add interface functions to retrieve bulk / control head endpoint descriptors
- Add macros for setting transfer descriptors field (taken from Haiku)
- Partly implement IUSBQueue::AddUSBRequest for control / bulk transfers
- Create endpoint descriptor for control request and link setup descriptor to it
- Link setup descriptors to data descriptor / status descriptor
- WIP (needs fixes)

svn path=/branches/usb-bringup/; revision=51864

show more ...

[USBOHCI]
- Fix bug in calculating offset of status register
- Start implementing deferred processing routine
- Signal status change when new device is arrived
- Implement basic GetPortStatus
- Start

[USBOHCI]
- Fix bug in calculating offset of status register
- Start implementing deferred processing routine
- Signal status change when new device is arrived
- Implement basic GetPortStatus
- Start implementing SetPortFeature, ClearPortStatus
- ResetPort not yet fully working, WIP

svn path=/branches/usb-bringup/; revision=51858

show more ...

[USBOHCI]
- Start of OHCI support
- Based on new usbehci driver and Haiku USB Stack
- Driver initializes the controller and retrieve number of ports

svn path=/branches/usb-bringup/; revision=51851