| /dports/cad/cura/Cura-58bae31/resources/definitions/ |
| H A D | cocoon_create_modelmaker.def.json | 27 "default_value": 120 number
30 "default_value": 100 number
33 "default_value": 135 number
48 "default_value": 1.75 number
51 "default_value": 0.10 number
54 "default_value": 0.2 number
60 "default_value": 0.6 number
63 "default_value": 40 number
66 "default_value": true boolean
72 "default_value": 7 number
[all …]
|
| H A D | mbot3d_grid2plus.def.json | 18 "machine_name": { "default_value": "MBot3D Grid 2+" }, string
25 "machine_width": { "default_value": 235 }, number
26 "machine_depth": { "default_value": 210 }, number
27 "machine_height": { "default_value": 190 }, number
28 "machine_heated_bed": { "default_value": true }, boolean
35 "machine_steps_per_mm_z": { "default_value": 400 }, number
37 "retraction_amount": { "default_value": 0.7 }, number
38 "retraction_speed": { "default_value": 15 }, number
39 "speed_print": { "default_value": 50 }, number
54 "raft_airgap": { "default_value": 0.15 }, number
[all …]
|
| H A D | mbot3d_grid2plus_dual.def.json | 26 "machine_width": { "default_value": 235 }, number
27 "machine_depth": { "default_value": 210 }, number
28 "machine_height": { "default_value": 190 }, number
29 "machine_extruder_count": { "default_value": 2 }, number
30 "machine_center_is_zero": { "default_value": true }, boolean
36 "machine_steps_per_mm_z": { "default_value": 400 }, number
38 "retraction_amount": { "default_value": 0.7 }, number
39 "retraction_speed": { "default_value": 15 }, number
40 "speed_print": { "default_value": 50 }, number
55 "raft_airgap": { "default_value": 0.15 }, number
[all …]
|
| H A D | tam.def.json | 21 "layer_height": { "default_value": 0.2 }, number
22 "layer_height_0": { "default_value": 0.3 }, number
23 "infill_sparse_density": { "default_value": 5 }, number
25 "top_bottom_thickness": { "default_value": 1 }, number
29 "machine_width": { "default_value": 305 }, number
30 "machine_depth": { "default_value": 305 }, number
31 "machine_height": { "default_value": 305 }, number
39 "speed_print": { "default_value": 60 }, number
41 "retraction_amount": { "default_value": 0.4 }, number
42 "retraction_speed": { "default_value": 35}, number
[all …]
|
| H A D | tevo_tornado.def.json | 20 "default_value": 300 number
23 "default_value": 400 number
26 "default_value": 300 number
32 "default_value": [ array
40 "default_value": 1.2 number
55 "default_value": 40 number
58 "default_value": 10 number
64 "default_value": 4 number
67 "default_value": 10 number
94 "default_value": 8 number
[all …]
|
| H A D | bq_witbox_2.def.json | 27 "default_value": 297 number
30 "default_value": 210 number
33 "default_value": 200 number
45 "default_value": 0.2 number
48 "default_value": 0.2 number
54 "default_value": 1.2 number
57 "default_value": 20 number
60 "default_value": 60 number
63 "default_value": 4 number
66 "default_value": 30 number
[all …]
|
| H A D | geeetech_A20T.def.json | 23 "default_value": 250 number
26 "default_value": 250 number
29 "default_value": 250 number
31 "default_value": false boolean
33 "layer_height": { "default_value": 0.1 }, number
34 "layer_height_0": { "default_value": 0.15 }, number
35 "retraction_amount": { "default_value": 0.8 }, number
36 "retraction_speed": { "default_value": 35 }, number
37 "adhesion_type": { "default_value": "skirt" }, string
44 "machine_max_jerk_xy": { "default_value": 10 }, number
[all …]
|
| H A D | geeetech_A10T.def.json | 23 "default_value": 220 number
26 "default_value": 220 number
29 "default_value": 260 number
32 "default_value": false boolean
34 "layer_height": { "default_value": 0.1 }, number
35 "layer_height_0": { "default_value": 0.15 }, number
36 "retraction_amount": { "default_value": 0.8 }, number
37 "retraction_speed": { "default_value": 35 }, number
38 "adhesion_type": { "default_value": "skirt" }, string
45 "machine_max_jerk_xy": { "default_value": 10 }, number
[all …]
|
| H A D | creatable_d3.def.json | 19 "machine_name": { "default_value": "Creatable D3" }, string
20 "machine_center_is_zero": { "default_value": true }, boolean
22 "machine_width": { "default_value": 250 }, number
23 "machine_height": { "default_value": 200 }, number
24 "machine_depth": { "default_value": 250 }, number
25 "machine_heated_bed": { "default_value": true }, boolean
26 "machine_shape": { "default_value": "elliptic" }, string
29 "layer_height": { "default_value": 0.1 }, number
31 "retraction_combing": { "default_value": "off" }, string
34 "retraction_speed": { "default_value": 100 }, number
[all …]
|
| H A D | tevo_tarantula.def.json | 22 "machine_heated_bed": { "default_value": true }, boolean
23 "machine_width": { "default_value": 200 }, number
24 "machine_height": { "default_value": 200 }, number
25 "machine_depth": { "default_value": 200 }, number
29 "default_value": array
39 "machine_acceleration": { "default_value": 2650 }, number
40 "machine_max_jerk_xy": { "default_value": 15.0 }, number
41 "machine_max_jerk_z": { "default_value": 0.4 }, number
42 "machine_max_jerk_e": { "default_value": 5 }, number
45 "machine_max_feedrate_z": { "default_value": 3 }, number
[all …]
|
| H A D | felixtec4dual.def.json | 25 "layer_height": { "default_value": 0.2 }, number
26 "layer_height_0": { "default_value": 0.3 }, number
29 "top_bottom_thickness": { "default_value": 1 }, number
33 "machine_width": { "default_value": 255 }, number
34 "machine_depth": { "default_value": 205 }, number
35 "machine_height": { "default_value": 225 }, number
41 "speed_print": { "default_value": 60 }, number
43 "retraction_amount": { "default_value": 1 }, number
44 "retraction_speed": { "default_value": 50}, number
45 "material_flow": { "default_value": 95 }, number
[all …]
|
| H A D | zyyx_agile.def.json | 23 "machine_name": { "default_value": "ZYYX Agile" }, string
30 "machine_width": { "default_value": 265 }, number
31 "machine_depth": { "default_value": 225 }, number
32 "machine_height": { "default_value": 195 }, number
33 "machine_center_is_zero": { "default_value": true }, boolean
39 "machine_steps_per_mm_z": { "default_value": 400 }, number
41 "retraction_amount": { "default_value": 0.7 }, number
42 "retraction_speed": { "default_value": 15 }, number
43 "speed_print": { "default_value": 50 }, number
58 "raft_airgap": { "default_value": 0.15 }, number
[all …]
|
| H A D | alfawise_u20.def.json | 27 "default_value": 300 number
30 "default_value": 400 number
33 "default_value": 300 number
36 "default_value": true boolean
48 "default_value": 1.75 number
51 "default_value": 0.2 number
57 "default_value": 40 number
60 "default_value": true boolean
63 "default_value": true boolean
66 "default_value": 5 number
[all …]
|
| H A D | jgaurora_z_603s.def.json | 27 "default_value": 280 number
30 "default_value": 175 number
33 "default_value": 180 number
36 "default_value": true boolean
48 "default_value": 1.75 number
51 "default_value": 0.2 number
57 "default_value": 60 number
60 "default_value": true boolean
63 "default_value": true boolean
66 "default_value": 5 number
[all …]
|
| H A D | jgaurora_a1.def.json | 27 "default_value": 300 number
30 "default_value": 300 number
33 "default_value": 300 number
36 "default_value": true boolean
48 "default_value": 1.75 number
51 "default_value": 0.12 number
57 "default_value": 40 number
60 "default_value": true boolean
63 "default_value": true boolean
66 "default_value": 6 number
[all …]
|
| H A D | jgaurora_a3s.def.json | 27 "default_value": 205 number
30 "default_value": 205 number
33 "default_value": 205 number
36 "default_value": true boolean
48 "default_value": 1.75 number
51 "default_value": 0.12 number
57 "default_value": 35 number
60 "default_value": true boolean
63 "default_value": true boolean
66 "default_value": 8 number
[all …]
|
| H A D | jgaurora_jgmaker_magic.def.json | 27 "default_value": 220 number
30 "default_value": 250 number
33 "default_value": 220 number
36 "default_value": true boolean
48 "default_value": 1.75 number
51 "default_value": 0.2 number
57 "default_value": 60 number
60 "default_value": true boolean
63 "default_value": true boolean
66 "default_value": 5 number
[all …]
|
| /dports/cad/cura/Cura-58bae31/resources/extruders/ |
| H A D | atmat_signal_pro_extruder_left.def.json | 12 "default_value": 0, number
15 "machine_nozzle_offset_x": { "default_value": 0 }, number
16 "machine_nozzle_offset_y": { "default_value": 0 }, number
17 "machine_extruder_start_pos_abs": { "default_value": true }, boolean
18 "machine_extruder_start_pos_x": { "default_value": 270 }, number
19 "machine_extruder_start_pos_y": { "default_value": 270 }, number
21 "machine_extruder_end_pos_x": { "default_value": 270 }, number
23 "extruder_prime_pos_x": { "default_value": 0 }, number
24 "extruder_prime_pos_y": { "default_value": 0 }, number
25 "extruder_prime_pos_z": { "default_value": 0 }, number
[all …]
|
| H A D | atmat_signal_pro_extruder_right.def.json | 12 "default_value": 1, number
15 "machine_nozzle_offset_x": { "default_value": 0 }, number
16 "machine_nozzle_offset_y": { "default_value": 0 }, number
17 "machine_extruder_start_pos_abs": { "default_value": true }, boolean
18 "machine_extruder_start_pos_x": { "default_value": 270 }, number
19 "machine_extruder_start_pos_y": { "default_value": 270 }, number
21 "machine_extruder_end_pos_x": { "default_value": 270 }, number
23 "extruder_prime_pos_x": { "default_value": 0 }, number
24 "extruder_prime_pos_y": { "default_value": 0 }, number
25 "extruder_prime_pos_z": { "default_value": 0 }, number
[all …]
|
| H A D | ultimaker_s3_extruder_left.def.json | 12 "default_value": 0, number
15 "machine_nozzle_offset_x": { "default_value": 0 }, number
16 "machine_nozzle_offset_y": { "default_value": 0 }, number
19 "machine_extruder_start_pos_x": { "default_value": 180 }, number
20 "machine_extruder_start_pos_y": { "default_value": 180 }, number
22 "machine_extruder_end_pos_x": { "default_value": 180 }, number
23 "machine_extruder_end_pos_y": { "default_value": 180 }, number
24 "machine_nozzle_head_distance": { "default_value": 2.7 }, number
25 "extruder_prime_pos_x": { "default_value": -3 }, number
26 "extruder_prime_pos_y": { "default_value": 6 }, number
[all …]
|
| H A D | ultimaker_s5_extruder_left.def.json | 12 "default_value": 0, number
15 "machine_nozzle_offset_x": { "default_value": 0 }, number
16 "machine_nozzle_offset_y": { "default_value": 0 }, number
19 "machine_extruder_start_pos_x": { "default_value": 330 }, number
20 "machine_extruder_start_pos_y": { "default_value": 237 }, number
22 "machine_extruder_end_pos_x": { "default_value": 330 }, number
23 "machine_extruder_end_pos_y": { "default_value": 237 }, number
24 "machine_nozzle_head_distance": { "default_value": 2.7 }, number
25 "extruder_prime_pos_x": { "default_value": -3 }, number
26 "extruder_prime_pos_y": { "default_value": 6 }, number
[all …]
|
| H A D | ultimaker_s5_extruder_right.def.json | 12 "default_value": 1, number
15 "machine_nozzle_offset_x": { "default_value": 22 }, number
16 "machine_nozzle_offset_y": { "default_value": 0 }, number
19 "machine_extruder_start_pos_x": { "default_value": 330 }, number
20 "machine_extruder_start_pos_y": { "default_value": 219 }, number
22 "machine_extruder_end_pos_x": { "default_value": 330 }, number
23 "machine_extruder_end_pos_y": { "default_value": 219 }, number
24 "machine_nozzle_head_distance": { "default_value": 4.2 }, number
25 "extruder_prime_pos_x": { "default_value": 333 }, number
26 "extruder_prime_pos_y": { "default_value": 6 }, number
[all …]
|
| H A D | ultimaker3_extended_extruder_right.def.json | 13 "default_value": 1, number
16 "machine_nozzle_offset_x": { "default_value": 18 }, number
17 "machine_nozzle_offset_y": { "default_value": 0 }, number
20 "machine_extruder_start_pos_x": { "default_value": 213 }, number
21 "machine_extruder_start_pos_y": { "default_value": 189 }, number
23 "machine_extruder_end_pos_x": { "default_value": 213 }, number
24 "machine_extruder_end_pos_y": { "default_value": 189 }, number
25 "machine_nozzle_head_distance": { "default_value": 4.2 }, number
26 "extruder_prime_pos_x": { "default_value": 222 }, number
27 "extruder_prime_pos_y": { "default_value": 6 }, number
[all …]
|
| H A D | ultimaker3_extruder_right.def.json | 13 "default_value": 1, number
16 "machine_nozzle_offset_x": { "default_value": 18 }, number
17 "machine_nozzle_offset_y": { "default_value": 0 }, number
20 "machine_extruder_start_pos_x": { "default_value": 213 }, number
21 "machine_extruder_start_pos_y": { "default_value": 189 }, number
23 "machine_extruder_end_pos_x": { "default_value": 213 }, number
24 "machine_extruder_end_pos_y": { "default_value": 189 }, number
25 "machine_nozzle_head_distance": { "default_value": 4.2 }, number
26 "extruder_prime_pos_x": { "default_value": 222 }, number
27 "extruder_prime_pos_y": { "default_value": 6 }, number
[all …]
|
| H A D | ultimaker3_extruder_left.def.json | 13 "default_value": 0, number
16 "machine_nozzle_offset_x": { "default_value": 0 }, number
17 "machine_nozzle_offset_y": { "default_value": 0 }, number
20 "machine_extruder_start_pos_x": { "default_value": 213 }, number
21 "machine_extruder_start_pos_y": { "default_value": 207 }, number
23 "machine_extruder_end_pos_x": { "default_value": 213 }, number
24 "machine_extruder_end_pos_y": { "default_value": 207 }, number
25 "machine_nozzle_head_distance": { "default_value": 2.7 }, number
26 "extruder_prime_pos_x": { "default_value": 9 }, number
27 "extruder_prime_pos_y": { "default_value": 6 }, number
[all …]
|