"7a8d25c0" (history) in projects: freebsd

Project(s)

Full Search
Definition
Symbol
File Path
History
Type

Searched hist:"7 a8d25c0" (Results 1 – 16 of 16) sorted by relevance

/freebsd/sys/powerpc/pseries/
H A D	plpar_iommu.h	7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib)
H A D	phyp-hvcall.S	7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib)
H A D	phyp-hvcall.h	7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib)
H A D	rtas_dev.c	7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib)
H A D	plpar_iommu.c	7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib)
H A D	phyp_console.c	7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib)
H A D	rtas_pci.c	7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib)
H A D	vdevice.c	7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib)
H A D	xics.c	7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib)
H A D	mmu_phyp.c	7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib)
H A D	platform_chrp.c	7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib)
/freebsd/sys/powerpc/conf/
H A D	DEFAULTS	7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib)
H A D	GENERIC64	7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib)
H A D	GENERIC	7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib)
/freebsd/sys/conf/
H A D	options.powerpc	7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib)
H A D	files.powerpc	7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib) 7a8d25c0 Tue Sep 17 17:37:04 GMT 2013 Nathan Whitehorn <nwhitehorn@FreeBSD.org> Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib)