busdma - Remove filter functionality

- Remove filtfunc and filtarg arguments from bus_dma_tag_create() and
fix all callers. All callers use NULL today for both filterfunc and
filterarg with one

busdma - Remove filter functionality

- Remove filtfunc and filtarg arguments from bus_dma_tag_create() and
fix all callers. All callers use NULL today for both filterfunc and
filterarg with one exception: if_jme.

- Remove filter functionality internally and parent tag tracking.
Without filter functions, we do not need to keep track of tag
ancestry. All inheritance of the parent tag's parameters occurs when
creating the new child tag.

- rename run_filter() to addr_needs_bounce().

- FreeBSD keeps the filtfunc and filtarg arguments but requires them to
be NULL.

- Drop filterfunc usage from if_jme.

In case of "JMC260 chip full mask revision 2", which has a hardware bug
when it comes to DMA transfers crossing the 4 GB bounday, the parent
buffer tag already limits DMA memory to 32bit address space. As such it
should be safe to drop the filterfunc. The filterfunc was checking if
the lower 32bits of the physical address used for DMA are all 0. In case
of a 32bit address space, the only address where all lower 32-bits are
all zero is 0 itself and I am here assuming that the physical address 0
is not used for DMA transfers!

Mainly obtained from: FreeBSD (commits 7cb028de, 900907f4, 1228b93b, 3933ff56)

show more ...

kernel: Move us to using M_NOWAIT and M_WAITOK for mbuf functions.

The main reason is that our having to use the MB_WAIT and MB_DONTWAIT
flags was a recurring issue when porting drivers from FreeBSD

kernel: Move us to using M_NOWAIT and M_WAITOK for mbuf functions.

The main reason is that our having to use the MB_WAIT and MB_DONTWAIT
flags was a recurring issue when porting drivers from FreeBSD because
it tended to get forgotten and the code would compile anyway with the
wrong constants. And since MB_WAIT and MB_DONTWAIT ended up as ocflags
for an objcache_get() or objcache_reclaimlist call (which use M_WAITOK
and M_NOWAIT), it was just one big converting back and forth with some
sanitization in between.

This commit allows M_* again for the mbuf functions and keeps the
sanitizing as it was before: when M_WAITOK is among the passed flags,
objcache functions will be called with M_WAITOK and when it is absent,
they will be called with M_NOWAIT. All other flags are scrubbed by the
MB_OCFLAG() macro which does the same as the former MBTOM().

Approved-by: dillon

show more ...

kernel: make pktinfo and cpuid native to ip_input()

In order to remove ether_input_pkt(), switch the prototype
of if_input() and adjust all callers. While there, consolidate
the style of the invoke

kernel: make pktinfo and cpuid native to ip_input()

In order to remove ether_input_pkt(), switch the prototype
of if_input() and adjust all callers. While there, consolidate
the style of the invoke.

Suggested and reviewed by: sephe

show more ...

kernel: Generate miidevs.h, pccarddevs.h and pcidevs.h on the fly.

It removes the need to regenerate those header file after first editing
the associated list of IDs (miidevs, pccarddevs or pcidevs)

kernel: Generate miidevs.h, pccarddevs.h and pcidevs.h on the fly.

It removes the need to regenerate those header file after first editing
the associated list of IDs (miidevs, pccarddevs or pcidevs). After this
commit, editing the list alone is enough to add IDs.

We already did it like that for usb4bsd's usbdevs.h before. This commit
adjusts things for the remaining ID lists.

show more ...

ifq: Remove the unused parameter 'mpolled' from ifq dequeue interface

The ifq_poll() -> ifq_dequeue() model is not MPSAFE, and mpolled has
not been used, i.e. set to NULL, for years; time to let it

ifq: Remove the unused parameter 'mpolled' from ifq dequeue interface

The ifq_poll() -> ifq_dequeue() model is not MPSAFE, and mpolled has
not been used, i.e. set to NULL, for years; time to let it go.

show more ...

netif: Setup TX ring CPUID before hooking up interrupt vectors

kernel: Use DEVMETHOD_END in the drivers.

if: Per-cpu ifnet/ifaddr statistics, step 1/3

Wrap ifnet/ifaddr stats updating, setting and extraction into macros;
ease upcoming changes.

if: Multiple TX queue support step 1 of many; introduce ifaltq subqueue

Put the plain queue information, e.g. queue header and tail, serializer,
packet staging scoreboard and ifnet.if_start schedule

if: Multiple TX queue support step 1 of many; introduce ifaltq subqueue

Put the plain queue information, e.g. queue header and tail, serializer,
packet staging scoreboard and ifnet.if_start schedule netmsg etc. into
its own structure (subqueue). ifaltq structure could have multiple of
subqueues based on the count that drivers can specify.

Subqueue's enqueue, dequeue, purging and states updating are protected
by the subqueue's serializer, so for hardwares supporting multiple TX
queues, contention on queuing operation could be greatly reduced.

The subqueue is passed to if_start to let the driver know which hardware
TX queue to work on. Only the related driver's TX queue serializer will
be held, so for hardwares supporting multiple TX queues, contention on
driver's TX queue serializer could be greatly reduced.

Bunch of ifsq_ prefixed functions are added, which is used to perform
various operations on subqueues. Commonly used ifq_ prefixed functions
are still kept mainly for the drivers which do not support multiple TX
queues (well, these functions also ease the netif/ convertion in this
step :).

All of the pseudo network devices under sys/net are converted to use the
new subqueue operation. netproto/802_11 is converted too. igb(4) is
converted to use the new subqueue operation, the rest of the network
drivers are only changed for the if_start interface modification.

For ALTQs which have packet scheduler enabled, only the first subqueue
is used (*).

(*) Whether we should utilize multiple TX queues if ALTQ's packet scheduler
is enabled is quite questionable. Mainly because hardware's multiple TX
queue packet dequeue mechanism could have negative impact on ALTQ's packet
scheduler's decision.

show more ...

if: Move if_cpuid into ifaltq; prepare multiple TX queues support

if_cpuid and if_npoll_cpuid are merged and moved into ifaltq as
altq_cpuid, which indicates the owner CPU of the tx queue. Since
we

if: Move if_cpuid into ifaltq; prepare multiple TX queues support

if_cpuid and if_npoll_cpuid are merged and moved into ifaltq as
altq_cpuid, which indicates the owner CPU of the tx queue. Since
we already have code in if_start_dispatch() to catching tx queue
owner CPU changes, this merging is quite safe.

show more ...

if: Move IFF_OACTIVE bit into ifaltq; prepare multiple TX queues support

ifaltq.altq_hw_oactive is now used to record that NIC's TX queue is full.
IFF_OACTIVE is removed from kernel. User space IFF

if: Move IFF_OACTIVE bit into ifaltq; prepare multiple TX queues support

ifaltq.altq_hw_oactive is now used to record that NIC's TX queue is full.
IFF_OACTIVE is removed from kernel. User space IFF_OACTIVE is kept for
compability.

ifaltq.altq_hw_oactive should not be accessed directly. Following set of
functions are provided and should be used:
ifq_is_oactive(ifnet.if_snd) - Whether NIC's TX queue is full or not
ifq_set_oactive(ifnet.if_snd) - NIC's TX queue is full
ifq_clr_oactive(ifnet.if_snd) - NIC's TX queue is no longer full

show more ...

vge: Switch from device_polling to ifpoll

intr: Remove no longer correct ithread_cpuid; use rman_get_cpuid instead

Initial import of binutils 2.22 on the new vendor branch

Future versions of binutils will also reside on this branch rather
than continuing to create new binutils branches for each new version.

kernel: Use NULL for DRIVER_MODULE()'s evh & arg (which are pointers).

This is just cosmetics for easier reading.

Unify vlan_input() and vlan_input_tag():
- For device drivers that support hardware vlan tag extraction, mbuf's
M_VLANTAG is turned on and vlan tag is saved in mbuf.m_pkthdr.ether_vlantag
- At the

Unify vlan_input() and vlan_input_tag():
- For device drivers that support hardware vlan tag extraction, mbuf's
M_VLANTAG is turned on and vlan tag is saved in mbuf.m_pkthdr.ether_vlantag
- At the very beginning of ether_input_chain(), if the packet's ether type is
vlan and hardware does not extract vlan tag, vlan_ether_decap() is called to
do software vlan tag extraction.
- Instead of BPF_MTAP(), ETHER_BPF_MTAP() is used in ether_input_chain() to
deliver possible vlan tagging information to the bpf listeners.
- Ether header is restored before calling vlan_input(), so under most cases,
extra ether header copy is avoided. vlan_input() does nothing more than
finding vlan interface and looping back the packet to ether_input_chain()
with vlan interface as input interface.

Ideas-from: FreeBSD

show more ...

Reduce ifnet.if_serializer contention on output path:
- Push ifnet.if_serializer holding down into each ifnet.if_output implementation
- Add a serializer into ifaltq, which is used to protect send qu

Reduce ifnet.if_serializer contention on output path:
- Push ifnet.if_serializer holding down into each ifnet.if_output implementation
- Add a serializer into ifaltq, which is used to protect send queue instead of
its parent's if_serializer. This change has following implication:
o On output path, enqueueing packets and calling ifnet.if_start are decoupled
o In device drivers, poll->dev_encap_ok->dequeue operation sequence is no
longer safe, instead dequeue->dev_encap_fail->prepend should be used
This serializer will be held by using lwkt_serialize_adaptive_enter()
- Add altq_started field into ifaltq, which is used to interlock the calling
of its parent's if_start, to reduce ifnet.if_serializer contention.
if_devstart(), a helper function which utilizes ifaltq.altq_started, is added
to reduce code duplication in ethernet device drivers.
- Add if_cpuid into ifnet. This field indicates on which CPU device driver's
interrupt will happen.
- Add ifq_dispatch(). This function will try to hold ifnet.if_serializer in
order to call ifnet.if_start. If this attempt fails, this function will
schedule ifnet.if_start to be called on CPU located by ifnet.if_start_cpuid
if_start_nmsg, which is per-CPU netmsg, is added to ifnet to facilitate
ifnet.if_start scheduling. ifq_dispatch() is called by ether_output_frame()
currently
- Use ifq_classic_ functions, if altq is not enabled
- Fix various device drivers bugs in their if_start implementation
- Add ktr for ifq classic enqueue and dequeue
- Add ktr for ifnet.if_start

show more ...

Add ETHER_BPF_MTAP() which will call vlan_ether_ptap() for packets whose vlan
tagging is offloaded to NIC.

Obtained-from: FreeBSD

- Embed ether vlan tag in mbuf packet header. Add an mbuf flag to mark that
this field is valid.
- Hide ifvlan after the above change; drivers support hardware vlan tagging
only need to check et

- Embed ether vlan tag in mbuf packet header. Add an mbuf flag to mark that
this field is valid.
- Hide ifvlan after the above change; drivers support hardware vlan tagging
only need to check ether_vlantag in mbuf packet header.
- Convert all drivers that support hardware vlan tagging to use vlan tag field
in mbug packet header.

Obtained-from: FreeBSD

Change the vlan/parent serializer releasing/holding sequences into mbuf
dispatching. There are several reasons to do so:
- Avoid excessive vlan interface serializer releasing/holding
- Touching parent interface if_snd without holding parent's serializer is
unsafe
- vlan's parent may disappear or be changed after vlan's serializer is released

# This dispatching could be further optimized by packing all mbufs into one
# netmsg using m_nextpkt to:
# - Amortize netmsg sending cost
# - Reduce the time that parent interface spends on serializer releasing/holding

show more ...

Add a new csum flag to tell IP defragmenter that csum_data does _not_
contain a valid IP fragment payload checksum. This flag is only intented
to be used by IP defragmenter.

Currently only bce(4),

Add a new csum flag to tell IP defragmenter that csum_data does _not_
contain a valid IP fragment payload checksum. This flag is only intented
to be used by IP defragmenter.

Currently only bce(4), bge(4) and ti(4) provide valid IP fragment payload
checksum. Turn on the new csum flag for the rest of the drivers, which
support hardware TCP/UDP checksum offload but hard-wire csum_data to 0xffff,
to avoid bypassing verification of defragmented payload's checksum.

Discussed-with: dillon@, hsu@
Approved-by: dillon@

show more ...

Vge(4) is miibus(4) aware, so nuke the already commented out link state change
reporting code.

Do a major clean-up of the BUSDMA architecture. A large number of
essentially machine-independant drivers use the structures and definitions
in machine-dependant directories that are really machine-

Do a major clean-up of the BUSDMA architecture. A large number of
essentially machine-independant drivers use the structures and definitions
in machine-dependant directories that are really machine-independant in
nature.

Split <machine/bus_dma.h> into machine-depdendant and machine-independant parts
and make the primary access run through <sys/bus_dma.h>.

Remove <machine/bus.h>, <machine/bus_memio.h> and <machine/bus_pio.h>. The
optimizations related to bus_memio.h and bus_pio.h made a huge mess,
introduced machine-specific knowledge into essentially machine-independant
drivers, and required specific #include file orderings to do their job.
They may be reintroduced in some other form later on.

Move <machine/resource.h> to <sys/bus_resource.h>. The contents of the file
is machine-independant or can be made a superset across many platforms.

Make <sys/bus.h> include <sys/bus_dma.h> and <sys/bus_resource.h> and
include <sys/bus.h> where necessary. Remove all #include's of
<machine/resource.h> and <machine/bus.h>. That is, make the BUSDMA
infrastructure integral to I/O-mapped and memory-mapped accesses to devices
and remove a large chunk of machine-specific dependancies from drivers.
bus_if.h and device_if.h are now required to be present when using <sys/bus.h>.

show more ...

Perform the following cleanup in sys/dev/netif:

* Ansify function definitions.

* Remove (void) casts for discarded return values.

* Remove register keywords.

* Move types and names in function de

Perform the following cleanup in sys/dev/netif:

* Ansify function definitions.

* Remove (void) casts for discarded return values.

* Remove register keywords.

* Move types and names in function definitions on separate lines.

In-collaboration-with: Alexey Slynko <slynko@tronet.ru>
Reviewed-by: sephe

show more ...

- Add ciphy for PHY modules produced by Cicada Semiconductor
- Add vge(4) for VIA VT612x GigE, which may have ciphy as its PHY module
- Add vge(4) into GENERIC and LINT
- Add man page for vge(4)

Tha

- Add ciphy for PHY modules produced by Cicada Semiconductor
- Add vge(4) for VIA VT612x GigE, which may have ciphy as its PHY module
- Add vge(4) into GENERIC and LINT
- Add man page for vge(4)

Thank Bill Paul for his work on this driver.
Thank Sascha Wildner for preparing the man page.

Obtained-from: FreeBSD
Tested-by: herrgard <herrgard@gmail.com>

NOTE:
Although polling(4) is claimed to be supported by this driver, but it does not
work that well with vge(4) (extremely slow, ~7000ms for ping, as reported by
herrgard).

show more ...

network code: Convert if_multiaddrs from LIST to TAILQ.

It can then be traversed backwards in the three drivers which want
to do that.

Taken-from: FreeBSD