media: rtl28xxu: fix idle handling

Currently the IR receiver is put into idle mode after each interrupt.
However longer IR like NEC can be distributed over multiple interrupts,
so putting the IR int

media: rtl28xxu: fix idle handling

Currently the IR receiver is put into idle mode after each interrupt.
However longer IR like NEC can be distributed over multiple interrupts,
so putting the IR into idle in the middle of such a message will break
decoding.

Every IR message has a trailing space of 0xbf (one less than
IR_IDE_LEN{0,1} which is programmed to 0xc0). So, set the timeout to that
value and rc-core will put the IR receiver into idle mode automatically.

Thanks to Jan Pieter van Woerkom <jp@jpvw.nl> for providing the hardware.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

show more ...

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 1

Based on 2 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 1

Based on 2 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details you
should have received a copy of the gnu general public license along
with this program if not write to the free software foundation inc
51 franklin street fifth floor boston ma 02110 1301 usa

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option [no]_[pad]_[ctrl] any later version this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not write to the free
software foundation inc 51 franklin street fifth floor boston ma
02110 1301 usa

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 176 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190519154040.652910950@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

media: dvb: Use WARM definition from identify_state()

Device should be either COLD or WARM.
This change only make usage of the existing definition.

Signed-off-by: Victor Toso <me@victortoso.com>
Si

media: dvb: Use WARM definition from identify_state()

Device should be either COLD or WARM.
This change only make usage of the existing definition.

Signed-off-by: Victor Toso <me@victortoso.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

show more ...

media: use strscpy() instead of strlcpy()

The implementation of strscpy() is more robust and safer.

That's now the recommended way to copy NUL terminated strings.

Signed-off-by: Mauro Carvalho Che

media: use strscpy() instead of strlcpy()

The implementation of strscpy() is more robust and safer.

That's now the recommended way to copy NUL terminated strings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

show more ...

media: dvb: fix location of get_dvb_firmware script

This script was moved out of Documentation/dvb, but the
links weren't updated.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

media: dvb: fix location of get_dvb_firmware script

This script was moved out of Documentation/dvb, but the
links weren't updated.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>

show more ...

media: dvb-usb-v2: add probe/disconnect callbacks

Add probe and disconnect callbacks that behaves similarly than ones
used commonly on Linux driver model. We need those to get early / late
access to

media: dvb-usb-v2: add probe/disconnect callbacks

Add probe and disconnect callbacks that behaves similarly than ones
used commonly on Linux driver model. We need those to get early / late
access to driver in order to use normal probe time stuff, like regmap,
extra bus adapters and so.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

show more ...

media: usb: dvb-usb-v2: dvb_usb_core: remove redundant code in dvb_usb_fe_sleep

Check on return value and goto instruction is redundant as the code
that follows is the goto label err.

Addresses-Cov

media: usb: dvb-usb-v2: dvb_usb_core: remove redundant code in dvb_usb_fe_sleep

Check on return value and goto instruction is redundant as the code
that follows is the goto label err.

Addresses-Coverity-ID: 1268783

Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

show more ...

media: rc-core: rename input_name to device_name

When an ir-spi is registered, you get this message.

rc rc0: Unspecified device as /devices/platform/soc/3f215080.spi/spi_master/spi32766/spi32766.12

media: rc-core: rename input_name to device_name

When an ir-spi is registered, you get this message.

rc rc0: Unspecified device as /devices/platform/soc/3f215080.spi/spi_master/spi32766/spi32766.128/rc/rc0

"Unspecified device" refers to input_name, which makes no sense for IR
TX only devices. So, rename to device_name.

Also make driver_name const char* so that no casts are needed anywhere.

Now ir-spi reports:

rc rc0: IR SPI as /devices/platform/soc/3f215080.spi/spi_master/spi32766/spi32766.128/rc/rc0

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

show more ...

[media] dvb-usb-v2: avoid use-after-free

I ran into a stack frame size warning because of the on-stack copy of
the USB device structure:

drivers/media/usb/dvb-usb-v2/dvb_usb_core.c: In function 'dv

[media] dvb-usb-v2: avoid use-after-free

I ran into a stack frame size warning because of the on-stack copy of
the USB device structure:

drivers/media/usb/dvb-usb-v2/dvb_usb_core.c: In function 'dvb_usbv2_disconnect':
drivers/media/usb/dvb-usb-v2/dvb_usb_core.c:1029:1: error: the frame size of 1104 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]

Copying a device structure like this is wrong for a number of other reasons
too aside from the possible stack overflow. One of them is that the
dev_info() call will print the name of the device later, but AFAICT
we have only copied a pointer to the name earlier and the actual name
has been freed by the time it gets printed.

This removes the on-stack copy of the device and instead copies the
device name using kstrdup(). I'm ignoring the possible failure here
as both printk() and kfree() are able to deal with NULL pointers.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

show more ...

[media] rc-main: assign driver type during allocation

The driver type can be assigned immediately when an RC device
requests to the framework to allocate the device.

This is an 'enum rc_driver_type

[media] rc-main: assign driver type during allocation

The driver type can be assigned immediately when an RC device
requests to the framework to allocate the device.

This is an 'enum rc_driver_type' data type and specifies whether
the device is a raw receiver or scancode receiver. The type will
be given as parameter to the rc_allocate_device device.

Change accordingly all the drivers calling rc_allocate_device()
so that the device type is specified during the rc device
allocation. Whenever the device type is not specified, it will be
set as RC_DRIVER_SCANCODE which was the default '0' value.

Suggested-by: Sean Young <sean@mess.org>
Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

show more ...

[media] media: usb: dvb-usb-v2: dvb_usb_core: don't print error when adding adapter fails

The core will do this for us now.

Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by:

[media] media: usb: dvb-usb-v2: dvb_usb_core: don't print error when adding adapter fails

The core will do this for us now.

Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

show more ...

[media] media_device: move allocation out of media_device_*_init

Right now, media_device_pci_init and media_device_usb_init does
media_device allocation internaly. That preents its usage when
the me

[media] media_device: move allocation out of media_device_*_init

Right now, media_device_pci_init and media_device_usb_init does
media_device allocation internaly. That preents its usage when
the media_device struct is embedded on some other structure.

Move memory allocation outside it, to make it more generic.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

show more ...

[media] media-device: move PCI/USB helper functions from v4l2-mc

Those ancillary functions could be called even when compiled
without V4L2 support, as warned by ktest build robot:

All errors (new o

[media] media-device: move PCI/USB helper functions from v4l2-mc

Those ancillary functions could be called even when compiled
without V4L2 support, as warned by ktest build robot:

All errors (new ones prefixed by >>):

>> ERROR: "__v4l2_mc_usb_media_device_init" [drivers/media/usb/dvb-usb/dvb-usb.ko] undefined!
>> ERROR: "__v4l2_mc_usb_media_device_init" [drivers/media/usb/dvb-usb-v2/dvb_usb_v2.ko] undefined!
>> ERROR: "__v4l2_mc_usb_media_device_init" [drivers/media/usb/au0828/au0828.ko] undefined!

Also, there's nothing there that are specific to V4L2. So, move
those ancillary functions to MC core.

No functional changes. Just function rename.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

show more ...

[media] use v4l2_mc_usb_media_device_init() on most USB devices

Except for the usbuvc driver (with has an embedded media_device
struct on it), the other drivers have a pointer to media_device.

On t

[media] use v4l2_mc_usb_media_device_init() on most USB devices

Except for the usbuvc driver (with has an embedded media_device
struct on it), the other drivers have a pointer to media_device.

On those drivers, replace their own implementation for the core
one. That warrants that those subdev drivers will fill the
media_device info the same way.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

show more ...

[media] media: change email address

Soon my dibcom.fr/parrot.com-address won't respond anymore.
Thus I'm replacing it. And, while being at it,
let's adapt some other (old) email-addresses as well.

[media] media: change email address

Soon my dibcom.fr/parrot.com-address won't respond anymore.
Thus I'm replacing it. And, while being at it,
let's adapt some other (old) email-addresses as well.

Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

show more ...

[media] dvb-usb-v2: postpone removal of media_device

We should not remove the media_device until its last usage,
or we may have use after free troubles.

So, move the per-adapter media_device remova

[media] dvb-usb-v2: postpone removal of media_device

We should not remove the media_device until its last usage,
or we may have use after free troubles.

So, move the per-adapter media_device removal to happen at
the end of the adapter removal code.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

show more ...

[media] dvbdev: Add RF connector if needed

Several pure digital TV devices have a frontend with the tuner
integrated on it. Add the RF connector when dvb_create_media_graph()
is called on such devic

[media] dvbdev: Add RF connector if needed

Several pure digital TV devices have a frontend with the tuner
integrated on it. Add the RF connector when dvb_create_media_graph()
is called on such devices.

Tested with siano and dvb_usb_mxl111sf drivers.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

show more ...

[media] usb: check media device errors

There are now two new warnings:

drivers/media/usb/dvb-usb-v2/dvb_usb_core.c: In function 'dvb_usbv2_media_device_register':
drivers/media/usb/dvb-usb-v2/dvb_u

[media] usb: check media device errors

There are now two new warnings:

drivers/media/usb/dvb-usb-v2/dvb_usb_core.c: In function 'dvb_usbv2_media_device_register':
drivers/media/usb/dvb-usb-v2/dvb_usb_core.c:433:2: warning: ignoring return value of '__media_device_register', declared with attribute warn_unused_result [-Wunused-result]
media_device_register(adap->dvb_adap.mdev);
^
drivers/media/usb/dvb-usb/dvb-usb-dvb.c: In function 'dvb_usb_media_device_register':
drivers/media/usb/dvb-usb/dvb-usb-dvb.c:128:2: warning: ignoring return value of '__media_device_register', declared with attribute warn_unused_result [-Wunused-result]
media_device_register(adap->dvb_adap.mdev);
^

Those are because the drivers are not properly checking if the
media device init and register were succeeded.

Fix it.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

show more ...

[media] media-device: split media initialization and registration

The media device node is registered and so made visible to user-space
before entities are registered and links created which means t

[media] media-device: split media initialization and registration

The media device node is registered and so made visible to user-space
before entities are registered and links created which means that the
media graph obtained by user-space could be only partially enumerated
if that happens too early before all the graph has been created.

To avoid this race condition, split the media init and registration
in separate functions and only register the media device node when
all the pending subdevices have been registered, either explicitly
by the driver or asynchronously using v4l2_async_register_subdev().

The media_device_register() had a check for drivers not filling dev
and model fields but all drivers in mainline set them and not doing
it will be a driver bug so change the function return to void and
add a BUG_ON() for dev being NULL instead.

Also, add a media_device_cleanup() function that will destroy the
graph_mutex that is initialized in media_device_init().

[mchehab@osg.samsung.com: Fix compilation if !CONFIG_MEDIA_CONTROLLER
and remove two warnings added by this changeset]
Suggested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

show more ...

[media] dvb core: must check dvb_create_media_graph()

If media controller is enabled and mdev is filled, it should
ensure that the media graph will be properly initialized.

Enforce that.

Acked-by:

[media] dvb core: must check dvb_create_media_graph()

If media controller is enabled and mdev is filled, it should
ensure that the media graph will be properly initialized.

Enforce that.

Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

show more ...

[media] use a function for DVB media controller register

This is really a simple function, but using it avoids to have
if's inside the drivers.

Also, the kABI becomes a little more clearer.

This s

[media] use a function for DVB media controller register

This is really a simple function, but using it avoids to have
if's inside the drivers.

Also, the kABI becomes a little more clearer.

This shouldn't generate any overhead, and the type check
will happen when compiling with MC DVB enabled.

So, let's do it.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

show more ...

[media] dvb: Avoid warnings when compiled without the media controller

drivers/media/usb/dvb-usb-v2/dvb_usb_core.c: In function ‘dvb_usbv2_adapter_dvb_exit’:
drivers/media/usb/dvb-usb-v2/dvb_usb_cor

[media] dvb: Avoid warnings when compiled without the media controller

drivers/media/usb/dvb-usb-v2/dvb_usb_core.c: In function ‘dvb_usbv2_adapter_dvb_exit’:
drivers/media/usb/dvb-usb-v2/dvb_usb_core.c:531:25: warning: unused variable ‘d’ [-Wunused-variable]
struct dvb_usb_device *d = adap_to_d(adap);
^
drivers/media/usb/dvb-usb-v2/dvb_usb_core.c:403:13: warning: ‘dvb_usbv2_media_device_register’ defined but not used [-Wunused-function]
static void dvb_usbv2_media_device_register(struct dvb_usb_adapter *adap)

drivers/media/usb/dvb-usb/dvb-usb-dvb.c:97:13: warning: ‘dvb_usb_media_device_register’ defined but not used [-Wunused-function]
static void dvb_usb_media_device_register(struct dvb_usb_adapter *adap)
^

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

show more ...

[media] dvbdev: use adapter arg for dvb_create_media_graph()

Instead of using media_dev argument for dvb_create_media_graph(),
use the adapter.

That allows to create a stub for this function, if co

[media] dvbdev: use adapter arg for dvb_create_media_graph()

Instead of using media_dev argument for dvb_create_media_graph(),
use the adapter.

That allows to create a stub for this function, if compiled
without DVB support, avoiding to add extra if's at the drivers.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

show more ...

[media] dvb-usb-v2: create one media_dev per adapter

Instead of assuming just one adapter, change the code to store
one media controller per adapter.

This works fine for dvb-usb, as, on all drivers

[media] dvb-usb-v2: create one media_dev per adapter

Instead of assuming just one adapter, change the code to store
one media controller per adapter.

This works fine for dvb-usb, as, on all drivers here, it is not
possible to write a media graph that would mix resources between
the two different adapters.

Acked-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

show more ...

[media] dvb-usb-v2: add support for the media controller at USB driver

Create a struct media_device and add it to the dvb adapter.

Please notice that the tuner is not mapped yet by the dvb core.

[

[media] dvb-usb-v2: add support for the media controller at USB driver

Create a struct media_device and add it to the dvb adapter.

Please notice that the tuner is not mapped yet by the dvb core.

[mchehab@osg.samsung.com: use config option MEDIA_CONTROLLER_DVB due to a rebase]
Signed-off-by: Rafael Lourenço de Lima Chehab <chehabrafael@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

show more ...