liquidio: remove obsolete functions and data structures

1. Remove unused functions and data structures.
2. Change the sending of the remaining soft commands to synchronous.

Signed-off-by: Weilin Ch

liquidio: remove obsolete functions and data structures

1. Remove unused functions and data structures.
2. Change the sending of the remaining soft commands to synchronous.

Signed-off-by: Weilin Chang <weilin.chang@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

liquidio: improve soft command handling

1. Set LIO_SC_MAX_TMO_MS as the maximum timeout value for a soft command
(sc). All sc's use this value as a hard timeout value. Add expiry_time
in stru

liquidio: improve soft command handling

1. Set LIO_SC_MAX_TMO_MS as the maximum timeout value for a soft command
(sc). All sc's use this value as a hard timeout value. Add expiry_time
in struct octeon_soft_command to keep the hard timeout value. The field
wait_time and timeout in struct octeon_soft_command will be obsoleted in
the last patch of this patch series.
2. Add processing a synchronous sc in sc response thread
lio_process_ordered_list. The memory allocated for a synchronous sc will
be freed by lio_process_ordered_list() to the sc pool.
3. Add two response lists for lio_process_ordered_list to process the
storage allocated for sc's:
OCTEON_DONE_SC_LIST response list keeps all sc's which will be freed to
the pool after their requestors have finished processing the responses.
OCTEON_ZOMBIE_SC_LIST response list keeps all sc's which have got
LIO_SC_MAX_TMO_MS timeout.
When an sc gets a hard timeout, lio_process_order_list() will recheck
its status 1 ms later. If the status has not updated by the firmware at
that time, the sc will be removed from OCTEON_DONE_SC_LIST response list
to OCTEON_ZOMBIE_SC_LIST response list. The sc's in the
OCTEON_ZOMBIE_SC_LIST response list will be freed when the driver is
unloaded.

Signed-off-by: Weilin Chang <weilin.chang@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

liquidio: xmit_more support

Defer ringing the Tx doorbell if skb->xmit_more is set unless the Tx queue
is full or stopped. To keep latency low, use a deferral limit of 8
packets. We chose 8 becaus

liquidio: xmit_more support

Defer ringing the Tx doorbell if skb->xmit_more is set unless the Tx queue
is full or stopped. To keep latency low, use a deferral limit of 8
packets. We chose 8 because Octeon can fetch at most 8 packets in a single
PCI read, and our tests show that 8 results in low latency.

Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com>
Signed-off-by: Satanand Burla <satananda.burla@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

liquidio: added support for ethtool --set-ring feature

added support for ethtool --set-ring feature

Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com>
Signed-off-by: Felix Manlunas <felix.manl

liquidio: added support for ethtool --set-ring feature

added support for ethtool --set-ring feature

Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

liquidio: replace info-pointer mode with buffer-pointer-only mode

Each Octeon output ring can DMA packets to host memory in two modes: info-
pointer mode and buffer-pointer-only mode. In info-poin

liquidio: replace info-pointer mode with buffer-pointer-only mode

Each Octeon output ring can DMA packets to host memory in two modes: info-
pointer mode and buffer-pointer-only mode. In info-pointer mode, Octeon
takes two buffer pointers for each packet and places the length of the
packet along with specified number of bytes from the beginning of the
packet into one buffer and the rest of the packet in a separate buffer. In
buffer-pointer-only mode, Octeon takes single buffer pointer and places the
length of the packet at the beginning of the buffer followed by the packet
data.

This patch switches all Octeon output rings from info-pointer mode to
buffer-pointer-only mode. This results in fewer DMA setups and cache line
snoops.

Signed-off-by: Prasad Kanneganti <pkanneganti@cavium.com>
Signed-off-by: Derek Chickles <derek.chickles@cavium.com>
Signed-off-by: Satanand Burla <satananda.burla@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

liquidio: improve UDP TX performance

Improve UDP TX performance by:
* reducing the ring size from 2K to 512
* replacing the numerous streaming DMA allocations for info buffers and
gather lists wit

liquidio: improve UDP TX performance

Improve UDP TX performance by:
* reducing the ring size from 2K to 512
* replacing the numerous streaming DMA allocations for info buffers and
gather lists with one large consistent DMA allocation per ring

BQL is not effective here. We reduced the ring size because there is heavy
overhead with dma_map_single every so often. With iommu=on, dma_map_single
in PF Tx data path was taking longer time (~700usec) for every ~250
packets. Debugged intel_iommu code, and found that PF driver is utilizing
too many static IO virtual address mapping entries (for gather list entries
and info buffers): about 100K entries for two PF's each using 8 rings.
Also, finding an empty entry (in rbtree of device domain's iova mapping in
kernel) during Tx path becomes a bottleneck every so often; the loop to
find the empty entry goes through over 40K iterations; this is too costly
and was the major overhead. Overhead is low when this loop quits quickly.

Netperf benchmark numbers before and after patch:

PF UDP TX
+--------+--------+------------+------------+---------+
| | | Before | After | |
| Number | | Patch | Patch | |
| of | Packet | Throughput | Throughput | Percent |
| Flows | Size | (Gbps) | (Gbps) | Change |
+--------+--------+------------+------------+---------+
| | 360 | 0.52 | 0.93 | +78.9 |
| 1 | 1024 | 1.62 | 2.84 | +75.3 |
| | 1518 | 2.44 | 4.21 | +72.5 |
+--------+--------+------------+------------+---------+
| | 360 | 0.45 | 1.59 | +253.3 |
| 4 | 1024 | 1.34 | 5.48 | +308.9 |
| | 1518 | 2.27 | 8.31 | +266.1 |
+--------+--------+------------+------------+---------+
| | 360 | 0.40 | 1.61 | +302.5 |
| 8 | 1024 | 1.64 | 4.24 | +158.5 |
| | 1518 | 2.87 | 6.52 | +127.2 |
+--------+--------+------------+------------+---------+

VF UDP TX
+--------+--------+------------+------------+---------+
| | | Before | After | |
| Number | | Patch | Patch | |
| of | Packet | Throughput | Throughput | Percent |
| Flows | Size | (Gbps) | (Gbps) | Change |
+--------+--------+------------+------------+---------+
| | 360 | 1.28 | 1.49 | +16.4 |
| 1 | 1024 | 4.44 | 4.39 | -1.1 |
| | 1518 | 6.08 | 6.51 | +7.1 |
+--------+--------+------------+------------+---------+
| | 360 | 2.35 | 2.35 | 0.0 |
| 4 | 1024 | 6.41 | 8.07 | +25.9 |
| | 1518 | 9.56 | 9.54 | -0.2 |
+--------+--------+------------+------------+---------+
| | 360 | 3.41 | 3.65 | +7.0 |
| 8 | 1024 | 9.35 | 9.34 | -0.1 |
| | 1518 | 9.56 | 9.57 | +0.1 |
+--------+--------+------------+------------+---------+

Signed-off-by: VSR Burru <veerasenareddy.burru@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: Derek Chickles <derek.chickles@cavium.com>
Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

liquidio: optimize reads from Octeon PCI console

Reads from Octeon PCI console are inefficient because before each read
operation, a dynamic mapping to Octeon DRAM is set up. This patch replaces
th

liquidio: optimize reads from Octeon PCI console

Reads from Octeon PCI console are inefficient because before each read
operation, a dynamic mapping to Octeon DRAM is set up. This patch replaces
the repeated setup of a dynamic mapping with a one-time setup of a static
mapping.

Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com>
Signed-off-by: Derek Chickles <derek.chickles@cavium.com>
Signed-off-by: Satanand Burla <satananda.burla@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

liquidio CN23XX: copyrights changes and alignment

Updated copyrights comments and also changed some other comments
alignments.

Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com>
Si

liquidio CN23XX: copyrights changes and alignment

Updated copyrights comments and also changed some other comments
alignments.

Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com>
Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com>
Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com>
Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

liquidio CN23XX: sysfs VF config support

Adds sysfs based support for enabling or disabling VFs.

Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com>
Signed-off-by: Derek Chickles <d

liquidio CN23XX: sysfs VF config support

Adds sysfs based support for enabling or disabling VFs.

Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com>
Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com>
Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com>
Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

liquidio CN23XX: HW config for VF support

Adds support for configuring HW for creating VFs.

Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com>
Signed-off-by: Derek Chickles <derek.

liquidio CN23XX: HW config for VF support

Adds support for configuring HW for creating VFs.

Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com>
Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com>
Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com>
Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

liquidio: CN23XX register setup

Adds support for initializing cn23xx device registers
related to mac, input/output and pf global config.

Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks

liquidio: CN23XX register setup

Adds support for initializing cn23xx device registers
related to mac, input/output and pf global config.

Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com>
Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com>
Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com>
Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

liquidio: CN23XX queue definitions

Add support for cn23xx specific queue definitions and
features.

Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com>
Signed-off-by: Satanand Burla <s

liquidio: CN23XX queue definitions

Add support for cn23xx specific queue definitions and
features.

Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com>
Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com>
Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com>
Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

liquidio: Remove redundant code

This patch removes redundant file includes and conditions.
Provides some meaningful comments and code alignment.

Signed-off-by: Derek Chickles <derek.chickles@cavium

liquidio: Remove redundant code

This patch removes redundant file includes and conditions.
Provides some meaningful comments and code alignment.

Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com>
Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com>
Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com>
Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

liquidio: soft command buffer limits

This patch increases the limits of soft command buffer size and
num command buffers. This patch also has changes for queue macros
and limit related changes for n

liquidio: soft command buffer limits

This patch increases the limits of soft command buffer size and
num command buffers. This patch also has changes for queue macros
and limit related changes for new chips.

Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com>
Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com>
Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com>
Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com>
Signed-off-by: Raghu Vatsavayi <rvatsavayi@caviumnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

Add support of Cavium Liquidio ethernet adapters

Following patch V8 adds support for Cavium Liquidio pci express
based 10Gig ethernet adapters.
1) Consolidated all debug macros to either call dev_*

Add support of Cavium Liquidio ethernet adapters

Following patch V8 adds support for Cavium Liquidio pci express
based 10Gig ethernet adapters.
1) Consolidated all debug macros to either call dev_* or
netdev_* macros directly, feedback from previous patch.
2) Changed soft commands to avoid crash when running
in interrupt context.
3) Fixed link status not reflecting correct status when NetworkManager
is running. Added MODULE_FIRMWARE declarations.

Following were the previous patches.
Patch V7:
1) Minor comments from v6 release regarding debug statements.
2) Fix for large multicast lists.
3) Fixed lockup issue if port initialization fails.
4) Enabled MSI by default.
https://patchwork.ozlabs.org/patch/464441/

Patch V6:
1) Addressed the uint64 vs u64 issue, feedback from previous patch.
2) Consolidated some receive processing routines.
3) Removed link status polling method.
https://patchwork.ozlabs.org/patch/459514/

Patch V5:
Based on the feedback from earlier patches with regards to
consolidation of common functions like device init, register
programming for cn66xx and cn68xx devices.
https://patchwork.ozlabs.org/patch/438979/

Patch V4:
Following were the changes based on the feedback from earlier patch:
1) Added mmiowb while synchronizing queue updates and other hw
interactions.
2) Statistics will now be incremented non-atomically per each ring.
liquidio_get_stats will add stats of each ring while reporting the
total statistics counts.
3) Modified liquidio_ioctl to return proper return codes.
4) Modified device naming to use standard Ethernet naming.
5) Global function names in the driver will have lio_/liquidio_/octeon_
prefix.
6) Ethtool related changes for:
Removed redundant stats and jiffies.
Use default ethtool handler of link status.
Speed setting will make use of ethtool_cmd_speed_set.
7) Added checks for pci_map_* return codes.
8) Check for signals while waiting in interruptible mode
https://patchwork.ozlabs.org/patch/435073/

Patch v3:
Implemented feedback from previous patch like:
Removed NAPI Config and DEBUG config options, added BQL and xmit_more
support.
https://patchwork.ozlabs.org/patch/422749/

Patch V2:
Implemented feedback from previous patch.
https://patchwork.ozlabs.org/patch/413539/

First Patch:
https://patchwork.ozlabs.org/patch/412946/

Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com>
Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com>
Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com>
Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com>
Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com>
Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...