usb: dwc2: gadget: Don't write invalid mapped sg entries into dma_desc with iommu enabled

When using dma_map_sg() to map the scatterlist with iommu enabled,
the entries in the scatterlist can be mer

usb: dwc2: gadget: Don't write invalid mapped sg entries into dma_desc with iommu enabled

When using dma_map_sg() to map the scatterlist with iommu enabled,
the entries in the scatterlist can be mergerd into less but longer
entries in the function __finalise_sg(). So that the number of
valid mapped entries is actually smaller than ureq->num_reqs,and
there are still some invalid entries in the scatterlist with
dma_addr=0xffffffff and len=0. Writing these invalid sg entries
into the dma_desc can cause a data transmission error.

The function dma_map_sg() returns the number of valid map entries
and the return value is assigned to usb_request::num_mapped_sgs in
function usb_gadget_map_request_by_dev(). So that just write valid
mapped entries into dma_desc according to the usb_request::num_mapped_sgs,
and set the IOC bit if it's the last valid mapped entry.

This patch poses no risk to no-iommu situation, cause
ureq->num_mapped_sgs equals ureq->num_sgs while using dma_direct_map_sg()
to map the scatterlist whith iommu disabled.

Signed-off-by: Peng Hongchi <hongchi.peng@siengine.com>
Link: https://lore.kernel.org/r/20240523100315.7226-1-hongchi.peng@siengine.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

usb: dwc2: gadget: LPM flow fix

Added functionality to exit from L1 state by device initiation
using remote wakeup signaling, in case when function driver queuing
request while core in L1 state.

Fi

usb: dwc2: gadget: LPM flow fix

Added functionality to exit from L1 state by device initiation
using remote wakeup signaling, in case when function driver queuing
request while core in L1 state.

Fixes: 273d576c4d41 ("usb: dwc2: gadget: Add functionality to exit from LPM L1 state")
Fixes: 88b02f2cb1e1 ("usb: dwc2: Add core state checking")
CC: stable@vger.kernel.org
Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Link: https://lore.kernel.org/r/b4d9de5382375dddbf7ef6049d9a82066ad87d5d.1710166393.git.Minas.Harutyunyan@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

usb: dwc2: gadget: Fix exiting from clock gating

Added exiting from the clock gating mode on USB Reset Detect interrupt
if core in the clock gating mode.
Added new condition to check core in clock g

usb: dwc2: gadget: Fix exiting from clock gating

Added exiting from the clock gating mode on USB Reset Detect interrupt
if core in the clock gating mode.
Added new condition to check core in clock gating mode or no.

Fixes: 9b4965d77e11 ("usb: dwc2: Add exit clock gating from session request interrupt")
Fixes: 5d240efddc7f ("usb: dwc2: Add exit clock gating from wakeup interrupt")
Fixes: 16c729f90bdf ("usb: dwc2: Allow exit clock gating in urb enqueue")
Fixes: 401411bbc4e6 ("usb: dwc2: Add exit clock gating before removing driver")
CC: stable@vger.kernel.org
Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Link: https://lore.kernel.org/r/cbcc2ccd37e89e339130797ed68ae4597db773ac.1708938774.git.Minas.Harutyunyan@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

usb: dwc2: Add hibernation updates for ULPI PHY

Added programmming of ULPI_LATCH_EN_DURING_HIB_ENTRY bit in GPWRDN
register when using ULPI PHY during entry/exit to/from hibernation.
This bit set to

usb: dwc2: Add hibernation updates for ULPI PHY

Added programmming of ULPI_LATCH_EN_DURING_HIB_ENTRY bit in GPWRDN
register when using ULPI PHY during entry/exit to/from hibernation.
This bit set to 1 during entering to hibernation if ULPI PHY used.
On exiting from hibernation this bit reset to 0.
Applicable for both host and device modes.

Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Link: https://lore.kernel.org/r/e024cb39a7177ec201c873df25ca6365f2e55947.1708948356.git.Minas.Harutyunyan@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

usb: dwc2: Add eUSB2 PHY disconnect flow support

To support eUSB2 PHY disconnect flow required in Soft disconnect
state set GOTGCTL_EUSB2_DISC_SUPP bit, if applicable.

On Session End Detected inter

usb: dwc2: Add eUSB2 PHY disconnect flow support

To support eUSB2 PHY disconnect flow required in Soft disconnect
state set GOTGCTL_EUSB2_DISC_SUPP bit, if applicable.

On Session End Detected interrupt clear PCGCTL_GATEHCLK and
PCGCTL_STOPPCLK bits if eusb2_disc parameter true.

Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Link: https://lore.kernel.org/r/9d50b83df693cda8c391313e90048df8dd611c04.1708948356.git.Minas.Harutyunyan@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

usb: Explicitly include correct DT includes

The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that mer

usb: Explicitly include correct DT includes

The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.

Acked-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230718143027.1064731-1-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

usb: dwc2: fix a race, don't power off/on phy for dual-role mode

When in dual role mode (dr_mode == USB_DR_MODE_OTG), platform probe
successively basically calls:
- dwc2_gadget_init()
- dwc2_hcd_ini

usb: dwc2: fix a race, don't power off/on phy for dual-role mode

When in dual role mode (dr_mode == USB_DR_MODE_OTG), platform probe
successively basically calls:
- dwc2_gadget_init()
- dwc2_hcd_init()
- dwc2_lowlevel_hw_disable() since recent change [1]
- usb_add_gadget_udc()

The PHYs (and so the clocks it may provide) shouldn't be disabled for all
SoCs, in OTG mode, as the HCD part has been initialized.

On STM32 this creates some weird race condition upon boot, when:
- initially attached as a device, to a HOST
- and there is a gadget script invoked to setup the device part.
Below issue becomes systematic, as long as the gadget script isn't
started by userland: the hardware PHYs (and so the clocks provided by the
PHYs) remains disabled.
It ends up in having an endless interrupt storm, before the watchdog
resets the platform.

[ 16.924163] dwc2 49000000.usb-otg: EPs: 9, dedicated fifos, 952 entries in SPRAM
[ 16.962704] dwc2 49000000.usb-otg: DWC OTG Controller
[ 16.966488] dwc2 49000000.usb-otg: new USB bus registered, assigned bus number 2
[ 16.974051] dwc2 49000000.usb-otg: irq 77, io mem 0x49000000
[ 17.032170] hub 2-0:1.0: USB hub found
[ 17.042299] hub 2-0:1.0: 1 port detected
[ 17.175408] dwc2 49000000.usb-otg: Mode Mismatch Interrupt: currently in Host mode
[ 17.181741] dwc2 49000000.usb-otg: Mode Mismatch Interrupt: currently in Host mode
[ 17.189303] dwc2 49000000.usb-otg: Mode Mismatch Interrupt: currently in Host mode
...

The host part is also not functional, until the gadget part is configured.

The HW may only be disabled for peripheral mode (original init), e.g.
dr_mode == USB_DR_MODE_PERIPHERAL, until the gadget driver initializes.

But when in USB_DR_MODE_OTG, the HW should remain enabled, as the HCD part
is able to run, while the gadget part isn't necessarily configured.

I don't fully get the of purpose the original change, that claims disabling
the hardware is missing. It creates conditions on SOCs using the PHY
initialization to be completely non working in OTG mode. Original
change [1] should be reworked to be platform specific.

[1] https://lore.kernel.org/r/20221206-dwc2-gadget-dual-role-v1-2-36515e1092cd@theobroma-systems.com

Fixes: ade23d7b7ec5 ("usb: dwc2: power on/off phy for peripheral mode in dual-role mode")
Cc: stable <stable@kernel.org>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Tested-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Link: https://lore.kernel.org/r/20230315144433.3095859-1-fabrice.gasnier@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

usb: dwc2: power on/off phy for peripheral mode in dual-role mode

The PHY power is handled for peripheral mode but only when the device is
forced into this peripheral mode. It is missing when the de

usb: dwc2: power on/off phy for peripheral mode in dual-role mode

The PHY power is handled for peripheral mode but only when the device is
forced into this peripheral mode. It is missing when the device is
operating in peripheral mode when dual-role mode is enabled, so let's
update the condition to match this scenario.

Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Link: https://lore.kernel.org/r/20221206-dwc2-gadget-dual-role-v1-2-36515e1092cd@theobroma-systems.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

usb: dwc2: gadget: remove D+ pull-up while no vbus with usb-role-switch

When using usb-role-switch, D+ pull-up is set as soon as DTCL_SFTDISCON is
cleared, whatever the vbus valid signal state is. T

usb: dwc2: gadget: remove D+ pull-up while no vbus with usb-role-switch

When using usb-role-switch, D+ pull-up is set as soon as DTCL_SFTDISCON is
cleared, whatever the vbus valid signal state is. The pull-up should not
be set when vbus isn't present (this is determined by the drd controller).

This patch ensures that B-Session (so Peripheral role + vbus valid signal)
is valid before clearing the DCTL_SFTDISCON bit when role switch is used.
Keep original behavior when usb-role-switch isn't used.

Acked-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20220622160717.314580-1-fabrice.gasnier@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

usb: dwc2: gadget: don't reset gadget's driver->bus

UDC driver should not touch gadget's driver internals, especially it
should not reset driver->bus. This wasn't harmful so far, but since
commit fc

usb: dwc2: gadget: don't reset gadget's driver->bus

UDC driver should not touch gadget's driver internals, especially it
should not reset driver->bus. This wasn't harmful so far, but since
commit fc274c1e9973 ("USB: gadget: Add a new bus for gadgets") gadget
subsystem got it's own bus and messing with ->bus triggers the
following NULL pointer dereference:

dwc2 12480000.hsotg: bound driver g_ether
8<--- cut here ---
Unable to handle kernel NULL pointer dereference at virtual address 00000000
[00000000] *pgd=00000000
Internal error: Oops: 5 [#1] SMP ARM
Modules linked in: ...
CPU: 0 PID: 620 Comm: modprobe Not tainted 5.18.0-rc5-next-20220504 #11862
Hardware name: Samsung Exynos (Flattened Device Tree)
PC is at module_add_driver+0x44/0xe8
LR is at sysfs_do_create_link_sd+0x84/0xe0
...
Process modprobe (pid: 620, stack limit = 0x(ptrval))
...
module_add_driver from bus_add_driver+0xf4/0x1e4
bus_add_driver from driver_register+0x78/0x10c
driver_register from usb_gadget_register_driver_owner+0x40/0xb4
usb_gadget_register_driver_owner from do_one_initcall+0x44/0x1e0
do_one_initcall from do_init_module+0x44/0x1c8
do_init_module from load_module+0x19b8/0x1b9c
load_module from sys_finit_module+0xdc/0xfc
sys_finit_module from ret_fast_syscall+0x0/0x54
Exception stack(0xf1771fa8 to 0xf1771ff0)
...
dwc2 12480000.hsotg: new device is high-speed
---[ end trace 0000000000000000 ]---

Fix this by removing driver->bus entry reset.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20220505104618.22729-1-m.szyprowski@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

usb: dwc2: gadget: don't try to disable ep0 in dwc2_hsotg_suspend

Calling dwc2_hsotg_ep_disable on ep0 (in/out) will lead to the following
logs before returning -EINVAL:
dwc2 49000000.usb-otg: dwc2_

usb: dwc2: gadget: don't try to disable ep0 in dwc2_hsotg_suspend

Calling dwc2_hsotg_ep_disable on ep0 (in/out) will lead to the following
logs before returning -EINVAL:
dwc2 49000000.usb-otg: dwc2_hsotg_ep_disable: called for ep0
dwc2 49000000.usb-otg: dwc2_hsotg_ep_disable: called for ep0

To avoid these two logs while suspending, start disabling the endpoint
from the index 1, as done in dwc2_hsotg_udc_stop:

/* all endpoints should be shutdown */
for (ep = 1; ep < hsotg->num_of_eps; ep++) {
if (hsotg->eps_in[ep])
dwc2_hsotg_ep_disable_lock(&hsotg->eps_in[ep]->ep);
if (hsotg->eps_out[ep])
dwc2_hsotg_ep_disable_lock(&hsotg->eps_out[ep]->ep);
}

Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20211207130101.270314-1-amelie.delaunay@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

usb: dwc2: gadget: initialize max_speed from params

DWC2 may be paired with a full-speed PHY which is not capable of
high-speed operation. Report this correctly to the gadget core by
setting max_sp

usb: dwc2: gadget: initialize max_speed from params

DWC2 may be paired with a full-speed PHY which is not capable of
high-speed operation. Report this correctly to the gadget core by
setting max_speed from the core parameters.

Prior to commit 5324bad66f09f ("usb: dwc2: gadget: implement
udc_set_speed()") this didn't cause the hardware to be configured
incorrectly, although the speed may have been reported incorrectly. But
after that commit params.speed is updated based on a value passed in by
the gadget core which may set it to a faster speed than is supported by
the hardware. Initialising the max_speed parameter ensures the speed
passed to dwc2_gadget_set_speed() will be one supported by the hardware.

Fixes: 5324bad66f09f ("usb: dwc2: gadget: implement udc_set_speed()")
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: John Keeping <john@metanate.com>
Link: https://lore.kernel.org/r/20220106115731.1473909-1-john@metanate.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

usb: dwc2: gadget: use existing helper

All other checks of params.g_dma_desc in this file use the
using_desc_dma() helper function. Use that helper in two more places
for consistency throughout the

usb: dwc2: gadget: use existing helper

All other checks of params.g_dma_desc in this file use the
using_desc_dma() helper function. Use that helper in two more places
for consistency throughout the file.

Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: John Keeping <john@metanate.com>
Link: https://lore.kernel.org/r/20211122123107.3147353-1-john@metanate.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

usb: dwc2: gadget: Fix ISOC flow for elapsed frames

Added updating of request frame number for elapsed frames,
otherwise frame number will remain as previous use of request.
This will allow function

usb: dwc2: gadget: Fix ISOC flow for elapsed frames

Added updating of request frame number for elapsed frames,
otherwise frame number will remain as previous use of request.
This will allow function driver to correctly track frames in
case of Missed ISOC occurs.

Added setting request actual length to 0 for elapsed frames.
In Slave mode when pushing data to RxFIFO by dwords, request
actual length incrementing accordingly. But before whole packet
will be pushed into RxFIFO and send to host can occurs Missed
ISOC and data will not send to host. So, in this case request
actual length should be reset to 0.

Fixes: 91bb163e1e4f ("usb: dwc2: gadget: Fix ISOC flow for BDMA and Slave")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: John Keeping <john@metanate.com>
Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Link: https://lore.kernel.org/r/c356baade6e9716d312d43df08d53ae557cb8037.1636011277.git.Minas.Harutyunyan@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

usb: dwc2: add otg_rev and otg_caps information for gadget driver

Currently the dwc2 doesn't fill in the 'otg_caps' of usb_gadget structure.
When registering a gadget device (e.g. via configfs), the

usb: dwc2: add otg_rev and otg_caps information for gadget driver

Currently the dwc2 doesn't fill in the 'otg_caps' of usb_gadget structure.
When registering a gadget device (e.g. via configfs), the
usb_otg_descriptor_init() checks the 'otg_caps' and 'otg_rev'. It defaults
to HNP and SRP bmAttributes if unspecified. There may be a mismatch with
what's being set in dwc2 params structure. This result in the descriptors
to be miss-configured in this case.

So replace 'otg_cap' bit field by 'otg_caps' structure, so hnp, srp and
otg_rev' can be configured directly in the params.
It's then provided to the gadget struct. These parameters can be tuned
for each platform. In case it's not set, it will default to current
behavior.

Also add option to setup these from the device tree by calling
of_usb_update_otg_caps(). This provides support for standard properties
such as "otg-rev", "hnp-disable" and "srp-disable" (see usb-drd.yaml).

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/1634133425-25670-4-git-send-email-fabrice.gasnier@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

usb: dwc2: gadget: Fix ISOC transfer complete handling for DDMA

When last descriptor in a descriptor list completed with XferComplete
interrupt, core switching to handle next descriptor and assert B

usb: dwc2: gadget: Fix ISOC transfer complete handling for DDMA

When last descriptor in a descriptor list completed with XferComplete
interrupt, core switching to handle next descriptor and assert BNA
interrupt. Both these interrupts are set while dwc2_hsotg_epint()
handler called. Each interrupt should be handled separately: first
XferComplete interrupt then BNA interrupt, otherwise last completed
transfer will not be giveback to function driver as completed
request.

Fixes: 729cac693eec ("usb: dwc2: Change ISOC DDMA flow")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Link: https://lore.kernel.org/r/a36981accc26cd674c5d8f8da6164344b94ec1fe.1631386531.git.Minas.Harutyunyan@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

usb: dwc2: gadget: Fix ISOC flow for BDMA and Slave

According USB spec each ISOC transaction should be performed in a
designated for that transaction interval. On bus errors or delays
in operating s

usb: dwc2: gadget: Fix ISOC flow for BDMA and Slave

According USB spec each ISOC transaction should be performed in a
designated for that transaction interval. On bus errors or delays
in operating system scheduling of client software can result in no
packet being transferred for a (micro)frame. An error indication
should be returned as status to the client software in such a case.

Current implementation in case of missed/dropped interval send same
data in next possible interval instead of reporting missed isoc.

This fix complete requests with -ENODATA if interval elapsed.

HSOTG core in BDMA and Slave modes haven't HW support for
(micro)frames tracking, this is why SW should care about tracking
of (micro)frames. Because of that method and consider operating
system scheduling delays, added few additional checking's of elapsed
target (micro)frame:
1. Immediately before enabling EP to start transfer.
2. With any transfer completion interrupt.
3. With incomplete isoc in/out interrupt.
4. With EP disabled interrupt because of incomplete transfer.
5. With OUT token received while EP disabled interrupt (for OUT
transfers).
6. With NAK replied to IN token interrupt (for IN transfers).

As part of ISOC flow, additionally fixed 'current' and 'target' frame
calculation functions. In HS mode SOF limits provided by DSTS register
is 0x3fff, but in non HS mode this limit is 0x7ff.

Tested by internal tool which also using for dwc3 testing.

Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/95d1423adf4b0f68187c9894820c4b7e964a3f7f.1631175721.git.Minas.Harutyunyan@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

usb: dwc2: gadget: implement udc_set_speed()

Implemented udc_set_speed() gadget ops to allow the udc to select
the gadget speed on initialization.

Acked-by: Minas Harutyunyan <Minas.Harutyunyan@syn

usb: dwc2: gadget: implement udc_set_speed()

Implemented udc_set_speed() gadget ops to allow the udc to select
the gadget speed on initialization.

Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: Argishti Aleksanyan <aleksan@synopsys.com>
Link: https://lore.kernel.org/r/c453469d618100321c876a8c2b0ebee15a456eac.1628583235.git.aleksan@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

usb: dwc2: gadget: Add endpoint wedge support

Add enpoint wedge support. Tested by USBCV MSC tests.

Signed-off-by: Argishti Aleksanyan <Argishti.Aleksanyan@synopsys.com>
Signed-off-by: Minas Haruty

usb: dwc2: gadget: Add endpoint wedge support

Add enpoint wedge support. Tested by USBCV MSC tests.

Signed-off-by: Argishti Aleksanyan <Argishti.Aleksanyan@synopsys.com>
Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Link: https://lore.kernel.org/r/3143ea6b8eee08761709a6c2788216292be46a34.1626087390.git.Minas.Harutyunyan@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

usb: dwc2: gadget: Fix sending zero length packet in DDMA mode.

Sending zero length packet in DDMA mode perform by DMA descriptor
by setting SP (short packet) flag.

For DDMA in function dwc2_hsotg_

usb: dwc2: gadget: Fix sending zero length packet in DDMA mode.

Sending zero length packet in DDMA mode perform by DMA descriptor
by setting SP (short packet) flag.

For DDMA in function dwc2_hsotg_complete_in() does not need to send
zlp.

Tested by USBCV MSC tests.

Fixes: f71b5e2533de ("usb: dwc2: gadget: fix zero length packet transfers")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Link: https://lore.kernel.org/r/967bad78c55dd2db1c19714eee3d0a17cf99d74a.1626777738.git.Minas.Harutyunyan@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

usb: dwc2: gadget: Fix GOUTNAK flow for Slave mode.

Because of dwc2_hsotg_ep_stop_xfr() function uses poll
mode, first need to mask GINTSTS_GOUTNAKEFF interrupt.
In Slave mode GINTSTS_GOUTNAKEFF int

usb: dwc2: gadget: Fix GOUTNAK flow for Slave mode.

Because of dwc2_hsotg_ep_stop_xfr() function uses poll
mode, first need to mask GINTSTS_GOUTNAKEFF interrupt.
In Slave mode GINTSTS_GOUTNAKEFF interrupt will be
aserted only after pop OUT NAK status packet from RxFIFO.

In dwc2_hsotg_ep_sethalt() function before setting
DCTL_SGOUTNAK need to unmask GOUTNAKEFF interrupt.

Tested by USBCV CH9 and MSC tests set in Slave, BDMA and DDMA.
All tests are passed.

Fixes: a4f827714539a ("usb: dwc2: gadget: Disable enabled HW endpoint in dwc2_hsotg_ep_disable")
Fixes: 6070636c4918c ("usb: dwc2: Fix Stalling a Non-Isochronous OUT EP")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Link: https://lore.kernel.org/r/e17fad802bbcaf879e1ed6745030993abb93baf8.1626152924.git.Minas.Harutyunyan@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

usb: dwc2: gadget: Repair 'dwc2_hsotg_core_init_disconnected()'s documentation

Fixes the following W=1 kernel build warning(s):

drivers/usb/dwc2/gadget.c:3349: warning: expecting prototype for dwc

usb: dwc2: gadget: Repair 'dwc2_hsotg_core_init_disconnected()'s documentation

Fixes the following W=1 kernel build warning(s):

drivers/usb/dwc2/gadget.c:3349: warning: expecting prototype for dwc2_hsotg_core_init(). Prototype was for dwc2_hsotg_core_init_disconnected() instead

Cc: Minas Harutyunyan <hminas@synopsys.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ben Dooks <ben@simtec.co.uk>
Cc: linux-usb@vger.kernel.org
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210526130037.856068-16-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

USB: dwc2: drop irq-flags initialisations

There's no need to initialise irq-flags variables before saving the
interrupt state.

While at it drop two redundant return-value initialisations from two o

USB: dwc2: drop irq-flags initialisations

There's no need to initialise irq-flags variables before saving the
interrupt state.

While at it drop two redundant return-value initialisations from two of
the functions that got it wrong.

Cc: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210519093303.10789-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

usb: dwc2: Fix gadget DMA unmap direction

The dwc2 gadget support maps and unmaps DMA buffers as necessary. When
mapping and unmapping it uses the direction of the endpoint to select
the direction o

usb: dwc2: Fix gadget DMA unmap direction

The dwc2 gadget support maps and unmaps DMA buffers as necessary. When
mapping and unmapping it uses the direction of the endpoint to select
the direction of the DMA transfer, but this fails for Control OUT
transfers because the unmap occurs after the endpoint direction has
been reversed for the status phase.

A possible solution would be to unmap the buffer before the direction
is changed, but a safer, less invasive fix is to remember the buffer
direction independently of the endpoint direction.

Fixes: fe0b94abcdf6 ("usb: dwc2: gadget: manage ep0 state in software")
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Link: https://lore.kernel.org/r/20210506112200.2893922-1-phil@raspberrypi.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

usb: dwc2: Reset DEVADDR after exiting gadget hibernation.

Initially resetting device address was done in dwc2_hsotg_irq()
interrupt handler. However, when core is hibernated USB RESET
is not handle

usb: dwc2: Reset DEVADDR after exiting gadget hibernation.

Initially resetting device address was done in dwc2_hsotg_irq()
interrupt handler. However, when core is hibernated USB RESET
is not handled in dwc2_hsotg_irq() handler, instead USB RESET
interrupt is handled in dwc2_handle_gpwrdn_intr() handler.

- Added reset device address to zero when core exits from gadget
hibernation.

Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: Artur Petrosyan <Arthur.Petrosyan@synopsys.com>
Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Link: https://lore.kernel.org/r/20210416124659.652CFA005C@mailhost.synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...