perf thread_map: Reduce exposure of libperf internal API

Remove unnecessary include of internal threadmap.h and refcount.h in
thread_map.h. Switch to using public APIs when possible or including
the

perf thread_map: Reduce exposure of libperf internal API

Remove unnecessary include of internal threadmap.h and refcount.h in
thread_map.h. Switch to using public APIs when possible or including
the internal header file in the C file. Fix a transitive dependency in
openat-syscall.c broken by the clean up.

Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: bpf@vger.kernel.org
Link: http://lore.kernel.org/lkml/20221109184914.1357295-13-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

perf test: Use skip in openat syscall

Failures to open the tracepoint cause this test to fail, however,
typically such failures are permission related. Lower the failure to
just skipping the test in

perf test: Use skip in openat syscall

Failures to open the tracepoint cause this test to fail, however,
typically such failures are permission related. Lower the failure to
just skipping the test in those cases and add a skip reason.

Committer testing:

Before:

$ perf test "openat syscall"
2: Detect openat syscall event : FAILED!
3: Detect openat syscall event on all cpus : FAILED!
$

After:

$ perf test "openat syscall"
2: Detect openat syscall event : Skip (permissions)
3: Detect openat syscall event on all cpus : Skip (permissions)
$

Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Carsten Haitzler <carsten.haitzler@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Marco Elver <elver@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Sohaib Mohamed <sohaib.amhmd@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20220518042027.836799-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

perf test: Rename struct test to test_suite

This is to align with kunit's terminology.

Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Sohaib Mohamed <sohaib.amhmd@gmail.com>
Acked-by: Ji

perf test: Rename struct test to test_suite

This is to align with kunit's terminology.

Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Sohaib Mohamed <sohaib.amhmd@gmail.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Daniel Latypov <dlatypov@google.com>
Cc: David Gow <davidgow@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20211104064208.3156807-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

perf test: Move each test suite struct to its test

Rather than export test functions, export the test struct. Rename with a
suite__ prefix to avoid name collisions.

Committer notes:

Its '&suite__v

perf test: Move each test suite struct to its test

Rather than export test functions, export the test struct. Rename with a
suite__ prefix to avoid name collisions.

Committer notes:

Its '&suite__vectors_page', not '&suite__vectors_pages', noticed when
cross building to arm (32-bit).

Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Sohaib Mohamed <sohaib.amhmd@gmail.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Daniel Latypov <dlatypov@google.com>
Cc: David Gow <davidgow@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20211104064208.3156807-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

perf evsel: Rename perf_evsel__new*() to evsel__new*()

As these are 'struct evsel' methods, not part of tools/lib/perf/, aka
libperf, to whom the perf_ prefix belongs.

Cc: Adrian Hunter <adrian.hun

perf evsel: Rename perf_evsel__new*() to evsel__new*()

As these are 'struct evsel' methods, not part of tools/lib/perf/, aka
libperf, to whom the perf_ prefix belongs.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

perf evsel: Rename *perf_evsel__read*() to *evsel__read()

As those are 'struct evsel' methods, not part of tools/lib/perf/, aka
libperf, to whom the perf_ prefix belongs.

Cc: Adrian Hunter <adrian.

perf evsel: Rename *perf_evsel__read*() to *evsel__read()

As those are 'struct evsel' methods, not part of tools/lib/perf/, aka
libperf, to whom the perf_ prefix belongs.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

perf evsel: Rename perf_evsel__open_per_*() to evsel__open_per_*()

As those are not 'struct evsel' methods, not part of tools/lib/perf/,
aka libperf, to whom the perf_ prefix belongs.

Cc: Adrian Hu

perf evsel: Rename perf_evsel__open_per_*() to evsel__open_per_*()

As those are not 'struct evsel' methods, not part of tools/lib/perf/,
aka libperf, to whom the perf_ prefix belongs.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

perf debug: Remove needless include directives from debug.h

All we need there is a forward declaration for 'union perf_event', so
remove it from there and add missing header directives in places usi

perf debug: Remove needless include directives from debug.h

All we need there is a forward declaration for 'union perf_event', so
remove it from there and add missing header directives in places using
things from this indirect include.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-7ftk0ztstqub1tirjj8o8xbl@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

perf tests: Add missing counts.h

Those are getting counts.h via evsel.h, that don't strictly need
counts.h, just forward declarations for some structs, so add it here
before we remove it from there.

perf tests: Add missing counts.h

Those are getting counts.h via evsel.h, that don't strictly need
counts.h, just forward declarations for some structs, so add it here
before we remove it from there.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-phldqlfxxu563txja7evd4zt@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

libperf: Adopt simplified perf_evsel__close() function from tools/perf

Add perf_evsel__close() function to libperf while keeping a tools/perf
specific evsel__close() to free ids.

Signed-off-by: Jir

libperf: Adopt simplified perf_evsel__close() function from tools/perf

Add perf_evsel__close() function to libperf while keeping a tools/perf
specific evsel__close() to free ids.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-64-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

libperf: Add perf_thread_map__get()/perf_thread_map__put()

Move the following functions:

thread_map__get()
thread_map__put()
thread_map__comm()

to libperf with the following names:

perf_t

libperf: Add perf_thread_map__get()/perf_thread_map__put()

Move the following functions:

thread_map__get()
thread_map__put()
thread_map__comm()

to libperf with the following names:

perf_thread_map__get()
perf_thread_map__put()
perf_thread_map__comm()

Add the perf_thread_map__comm() function for it to work/compile.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-34-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

perf evsel: Rename perf_evsel__delete() to evsel__delete()

Remame perf_evsel__delete() to evsel__delete(), so we don't have a name
clash when we add perf_evsel__delete() in libperf.

Also renaming p

perf evsel: Rename perf_evsel__delete() to evsel__delete()

Remame perf_evsel__delete() to evsel__delete(), so we don't have a name
clash when we add perf_evsel__delete() in libperf.

Also renaming perf_evsel__delete_priv() to evsel__delete_priv().

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-11-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

perf evsel: Rename struct perf_evsel to struct evsel

Rename struct perf_evsel to struct evsel, so we don't have a name clash
when we add struct perf_evsel in libperf.

Committer notes:

Added fixes

perf evsel: Rename struct perf_evsel to struct evsel

Rename struct perf_evsel to struct evsel, so we don't have a name clash
when we add struct perf_evsel in libperf.

Committer notes:

Added fixes for arm64, provided by Jiri.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-5-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

perf tools: Rename struct thread_map to struct perf_thread_map

Rename struct thread_map to struct perf_thread_map, so it could be part
of libperf.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Al

perf tools: Rename struct thread_map to struct perf_thread_map

Rename struct thread_map to struct perf_thread_map, so it could be part
of libperf.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-4-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.

For non */uapi/* files that summary was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139

and resulted in the first patch in this series.

If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930

and resulted in the second patch in this series.

- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:

SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1

and that resulted in the third patch in this series.

- when the two scanners agreed on the detected license(s), that became
the concluded license(s).

- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.

- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).

- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.

- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct

This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

perf evsel: Fix buffer overflow while freeing events

Fix buffer overflow for:

% perf stat -e msr/tsc/,cstate_core/c7-residency/ true

that causes glibc free list corruption. For some reason it do

perf evsel: Fix buffer overflow while freeing events

Fix buffer overflow for:

% perf stat -e msr/tsc/,cstate_core/c7-residency/ true

that causes glibc free list corruption. For some reason it doesn't
trigger in valgrind, but it is visible in AS:

=================================================================
==32681==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x603000003f5c at pc 0x0000005671ef bp 0x7ffdaaac9ac0 sp 0x7ffdaaac9ab0
READ of size 4 at 0x603000003f5c thread T0
#0 0x5671ee in perf_evsel__close_fd util/evsel.c:1196
#1 0x56c57a in perf_evsel__close util/evsel.c:1717
#2 0x55ed5f in perf_evlist__close util/evlist.c:1631
#3 0x4647e1 in __run_perf_stat /home/ak/hle/linux-hle-2.6/tools/perf/builtin-stat.c:749
#4 0x4648e3 in run_perf_stat /home/ak/hle/linux-hle-2.6/tools/perf/builtin-stat.c:767
#5 0x46e1bc in cmd_stat /home/ak/hle/linux-hle-2.6/tools/perf/builtin-stat.c:2785
#6 0x52f83d in run_builtin /home/ak/hle/linux-hle-2.6/tools/perf/perf.c:296
#7 0x52fd49 in handle_internal_command /home/ak/hle/linux-hle-2.6/tools/perf/perf.c:348
#8 0x5300de in run_argv /home/ak/hle/linux-hle-2.6/tools/perf/perf.c:392
#9 0x5308f3 in main /home/ak/hle/linux-hle-2.6/tools/perf/perf.c:530
#10 0x7f0672d13400 in __libc_start_main (/lib64/libc.so.6+0x20400)
#11 0x428419 in _start (/home/ak/hle/obj-perf/perf+0x428419)

0x603000003f5c is located 0 bytes to the right of 28-byte region [0x603000003f40,0x603000003f5c)
allocated by thread T0 here:
#0 0x7f0675139020 in calloc (/lib64/libasan.so.3+0xc7020)
#1 0x648a2d in zalloc util/util.h:23
#2 0x648a88 in xyarray__new util/xyarray.c:9
#3 0x566419 in perf_evsel__alloc_fd util/evsel.c:1039
#4 0x56b427 in perf_evsel__open util/evsel.c:1529
#5 0x56c620 in perf_evsel__open_per_thread util/evsel.c:1730
#6 0x461dea in create_perf_stat_counter /home/ak/hle/linux-hle-2.6/tools/perf/builtin-stat.c:263
#7 0x4637d7 in __run_perf_stat /home/ak/hle/linux-hle-2.6/tools/perf/builtin-stat.c:600
#8 0x4648e3 in run_perf_stat /home/ak/hle/linux-hle-2.6/tools/perf/builtin-stat.c:767
#9 0x46e1bc in cmd_stat /home/ak/hle/linux-hle-2.6/tools/perf/builtin-stat.c:2785
#10 0x52f83d in run_builtin /home/ak/hle/linux-hle-2.6/tools/perf/perf.c:296
#11 0x52fd49 in handle_internal_command /home/ak/hle/linux-hle-2.6/tools/perf/perf.c:348
#12 0x5300de in run_argv /home/ak/hle/linux-hle-2.6/tools/perf/perf.c:392
#13 0x5308f3 in main /home/ak/hle/linux-hle-2.6/tools/perf/perf.c:530
#14 0x7f0672d13400 in __libc_start_main (/lib64/libc.so.6+0x20400)

The event is allocated with cpus == 1, but freed with cpus == real number
When the evsel close function walks the file descriptors it exceeds the
fd xyarray boundaries and reads random memory.

v2:

Now that xyarrays save their original dimensions we can use these to
iterate the two dimensional fd arrays. Fix some users (close, ioctl) in
evsel.c to use these fields directly. This allows simplifying the code
and dropping quite a few function arguments. Adjust all callers by
removing the unneeded arguments.

The actual perf event reading still uses the original values from the
evsel list.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170811232634.30465-2-andi@firstfloor.org
[ Fix up xy_max_[xy]() -> xyarray__max_[xy]() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

perf test: Add 'struct test *' to the test functions

This way we'll be able to pass more test specific parameters without
having to change this function signature.

Will be used by the upcoming 'she

perf test: Add 'struct test *' to the test functions

This way we'll be able to pass more test specific parameters without
having to change this function signature.

Will be used by the upcoming 'shell tests', shell scripts that will
call perf tools and check if they work as expected, comparing its
effects on the system (think 'perf probe foo') the output produced, etc.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-wq250w7j1opbzyiynozuajbl@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

perf tools: Move path related functions to util/path.h

Disentangling util.h header mess a bit more.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jo

perf tools: Move path related functions to util/path.h

Disentangling util.h header mess a bit more.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-aj6je8ly377i4upedmjzdsq6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

perf tools: Include errno.h where needed

Removing it from util.h, part of an effort to disentangle the includes
hell, that makes changes to util.h or something included by it to cause
a complete reb

perf tools: Include errno.h where needed

Removing it from util.h, part of an effort to disentangle the includes
hell, that makes changes to util.h or something included by it to cause
a complete rebuild of the tools.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ztrjy52q1rqcchuy3rubfgt2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

perf tools: Including missing inttypes.h header

Needed to use the PRI[xu](32,64) formatting macros.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jo

perf tools: Including missing inttypes.h header

Needed to use the PRI[xu](32,64) formatting macros.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-wkbho8kaw24q67dd11q0j39f@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

tools: Introduce str_error_r()

The tools so far have been using the strerror_r() GNU variant, that
returns a string, be it the buffer passed or something else.

But that, besides being tricky in cas

tools: Introduce str_error_r()

The tools so far have been using the strerror_r() GNU variant, that
returns a string, be it the buffer passed or something else.

But that, besides being tricky in cases where we expect that the
function using strerror_r() returns the error formatted in a provided
buffer (we have to check if it returned something else and copy that
instead), breaks the build on systems not using glibc, like Alpine
Linux, where musl libc is used.

So, introduce yet another wrapper, str_error_r(), that has the GNU
interface, but uses the portable XSI variant of strerror_r(), so that
users rest asured that the provided buffer is used and it is what is
returned.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-d4t42fnf48ytlk8rjxs822tf@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

perf tests: Pass the subtest index to each test routine

Some tests have sub-tests we want to run, so allow passing this.

Wang tried to avoid having to touch all tests, but then, having the
test.fun

perf tests: Pass the subtest index to each test routine

Some tests have sub-tests we want to run, so allow passing this.

Wang tried to avoid having to touch all tests, but then, having the
test.func in an anonymous union makes the build fail on older compilers,
like the one in RHEL6, where:

test a = {
.func = foo,
};

fails.

To fix it leave the func pointer in the main structure and pass the subtest
index to all tests, end result function is the same, but we have just one
function pointer, not two, with and without the subtest index as an argument.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-5genj0ficwdmelpoqlds0u4y@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

perf test: Silence tracepoint event failures

Currently, when 'perf test' is run by a normal user, it'll fail to
access tracepoint events. The output becomes somewhat messy because it
tries to be ni

perf test: Silence tracepoint event failures

Currently, when 'perf test' is run by a normal user, it'll fail to
access tracepoint events. The output becomes somewhat messy because it
tries to be nice with long error messages and hints.

IMHO this is not needed for 'perf test' by default and AFAIK 'perf test'
uses pr_debug() rather than pr_err() for such messages so that one can
use -v option to see further details on failed testcases if needed.

Before:
$ perf test
1: vmlinux symtab matches kallsyms : FAILED!
2: detect openat syscall event :Error:
No permissions to read
/sys/kernel/debug/tracing/events/syscalls/sys_enter_openat
Hint: Try 'sudo mount -o remount,mode=755 /sys/kernel/debug/tracing'
FAILED!
3: detect openat syscall event on all cpus :Error:
No permissions to read
/sys/kernel/debug/tracing/events/syscalls/sys_enter_openat
Hint: Try 'sudo mount -o remount,mode=755 /sys/kernel/debug/tracing'
FAILED!
...

After:
$ perf test
1: vmlinux symtab matches kallsyms : FAILED!
2: detect openat syscall event : FAILED!
3: detect openat syscall event on all cpus : FAILED!
...

$ perf test -v 2
2: detect openat syscall event :
--- start ---
test child forked, pid 30575
Error: No permissions to read
/sys/kernel/debug/tracing/events/syscalls/sys_enter_openat
Hint: Try 'sudo mount -o remount,mode=755 /sys/kernel/debug/tracing'

test child finished with -1
---- end ----
detect openat syscall event: FAILED!

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1445268229-1601-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

perf evsel: Propagate error info from tp_format

Propagate error info from tp_format via ERR_PTR to get it all the way
down to the parse-event.c tracepoint adding routines. Following
functions now re

perf evsel: Propagate error info from tp_format

Propagate error info from tp_format via ERR_PTR to get it all the way
down to the parse-event.c tracepoint adding routines. Following
functions now return pointer with encoded error:

- tp_format
- trace_event__tp_format
- perf_evsel__newtp_idx
- perf_evsel__newtp

This affects several other places in perf, that cannot use pointer check
anymore, but must utilize the err.h interface, when getting error
information from above functions list.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Raphael Beamonte <raphael.beamonte@gmail.com>
Link: http://lkml.kernel.org/r/1441615087-13886-5-git-send-email-jolsa@kernel.org
[ Add two missing ERR_PTR() and one IS_ERR() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

perf tools: Switch to tracing_path interface on appropriate places

Using tracing_path interface on several places, that more or less
copy the functionality of tracing_path interface.

Signed-off-by:

perf tools: Switch to tracing_path interface on appropriate places

Using tracing_path interface on several places, that more or less
copy the functionality of tracing_path interface.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Raphael Beamonte <raphael.beamonte@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1441180605-24737-16-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...