selftests/bpf: Improve percpu_alloc test robustness

Make these non-serial tests filter BPF programs by intended PID of
a test runner process. This makes it isolated from other parallel tests
that mi

selftests/bpf: Improve percpu_alloc test robustness

Make these non-serial tests filter BPF programs by intended PID of
a test runner process. This makes it isolated from other parallel tests
that might interfere accidentally.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20231011223728.3188086-2-andrii@kernel.org

show more ...

selftests/bpf: Remove unnecessary direct read of local percpu kptr

For the second argument of bpf_kptr_xchg(), if the reg type contains
MEM_ALLOC and MEM_PERCPU, which means a percpu allocation,
aft

selftests/bpf: Remove unnecessary direct read of local percpu kptr

For the second argument of bpf_kptr_xchg(), if the reg type contains
MEM_ALLOC and MEM_PERCPU, which means a percpu allocation,
after bpf_kptr_xchg(), the argument is marked as MEM_RCU and MEM_PERCPU
if in rcu critical section. This way, re-reading from the map value
is not needed. Remove it from the percpu_alloc_array.c selftest.

Without previous kernel change, the test will fail like below:

0: R1=ctx(off=0,imm=0) R10=fp0
; int BPF_PROG(test_array_map_10, int a)
0: (b4) w1 = 0 ; R1_w=0
; int i, index = 0;
1: (63) *(u32 *)(r10 -4) = r1 ; R1_w=0 R10=fp0 fp-8=0000????
2: (bf) r2 = r10 ; R2_w=fp0 R10=fp0
;
3: (07) r2 += -4 ; R2_w=fp-4
; e = bpf_map_lookup_elem(&array, &index);
4: (18) r1 = 0xffff88810e771800 ; R1_w=map_ptr(off=0,ks=4,vs=16,imm=0)
6: (85) call bpf_map_lookup_elem#1 ; R0_w=map_value_or_null(id=1,off=0,ks=4,vs=16,imm=0)
7: (bf) r6 = r0 ; R0_w=map_value_or_null(id=1,off=0,ks=4,vs=16,imm=0) R6_w=map_value_or_null(id=1,off=0,ks=4,vs=16,imm=0)
; if (!e)
8: (15) if r6 == 0x0 goto pc+81 ; R6_w=map_value(off=0,ks=4,vs=16,imm=0)
; bpf_rcu_read_lock();
9: (85) call bpf_rcu_read_lock#87892 ;
; p = e->pc;
10: (bf) r7 = r6 ; R6=map_value(off=0,ks=4,vs=16,imm=0) R7_w=map_value(off=0,ks=4,vs=16,imm=0)
11: (07) r7 += 8 ; R7_w=map_value(off=8,ks=4,vs=16,imm=0)
12: (79) r6 = *(u64 *)(r6 +8) ; R6_w=percpu_rcu_ptr_or_null_val_t(id=2,off=0,imm=0)
; if (!p) {
13: (55) if r6 != 0x0 goto pc+13 ; R6_w=0
; p = bpf_percpu_obj_new(struct val_t);
14: (18) r1 = 0x12 ; R1_w=18
16: (b7) r2 = 0 ; R2_w=0
17: (85) call bpf_percpu_obj_new_impl#87883 ; R0_w=percpu_ptr_or_null_val_t(id=4,ref_obj_id=4,off=0,imm=0) refs=4
18: (bf) r6 = r0 ; R0=percpu_ptr_or_null_val_t(id=4,ref_obj_id=4,off=0,imm=0) R6=percpu_ptr_or_null_val_t(id=4,ref_obj_id=4,off=0,imm=0) refs=4
; if (!p)
19: (15) if r6 == 0x0 goto pc+69 ; R6=percpu_ptr_val_t(ref_obj_id=4,off=0,imm=0) refs=4
; p1 = bpf_kptr_xchg(&e->pc, p);
20: (bf) r1 = r7 ; R1_w=map_value(off=8,ks=4,vs=16,imm=0) R7=map_value(off=8,ks=4,vs=16,imm=0) refs=4
21: (bf) r2 = r6 ; R2_w=percpu_ptr_val_t(ref_obj_id=4,off=0,imm=0) R6=percpu_ptr_val_t(ref_obj_id=4,off=0,imm=0) refs=4
22: (85) call bpf_kptr_xchg#194 ; R0_w=percpu_ptr_or_null_val_t(id=6,ref_obj_id=6,off=0,imm=0) refs=6
; if (p1) {
23: (15) if r0 == 0x0 goto pc+3 ; R0_w=percpu_ptr_val_t(ref_obj_id=6,off=0,imm=0) refs=6
; bpf_percpu_obj_drop(p1);
24: (bf) r1 = r0 ; R0_w=percpu_ptr_val_t(ref_obj_id=6,off=0,imm=0) R1_w=percpu_ptr_val_t(ref_obj_id=6,off=0,imm=0) refs=6
25: (b7) r2 = 0 ; R2_w=0 refs=6
26: (85) call bpf_percpu_obj_drop_impl#87882 ;
; v = bpf_this_cpu_ptr(p);
27: (bf) r1 = r6 ; R1_w=scalar(id=7) R6=scalar(id=7)
28: (85) call bpf_this_cpu_ptr#154
R1 type=scalar expected=percpu_ptr_, percpu_rcu_ptr_, percpu_trusted_ptr_

The R1 which gets its value from R6 is a scalar. But before insn 22, R6 is
R6=percpu_ptr_val_t(ref_obj_id=4,off=0,imm=0)
Its type is changed to a scalar at insn 22 without previous patch.

Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230827152821.2001129-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

show more ...

selftests/bpf: Add tests for array map with local percpu kptr

Add non-sleepable and sleepable tests with percpu kptr. For
non-sleepable test, four programs are executed in the order of:
1. allocat

selftests/bpf: Add tests for array map with local percpu kptr

Add non-sleepable and sleepable tests with percpu kptr. For
non-sleepable test, four programs are executed in the order of:
1. allocate percpu data.
2. assign values to percpu data.
3. retrieve percpu data.
4. de-allocate percpu data.

The sleepable prog tried to exercise all above 4 steps in a
single prog. Also for sleepable prog, rcu_read_lock is needed
to protect direct percpu ptr access (from map value) and
following bpf_this_cpu_ptr() and bpf_per_cpu_ptr() helpers.

Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230827152811.2000125-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

show more ...