Import acpica 2022-10-20

20 October 2022. Summary of changes for version 20221020:

This release is available at https://acpica.org/downloads

0) Global changes:

Allow disabling of -Werror. For dis

Import acpica 2022-10-20

20 October 2022. Summary of changes for version 20221020:

This release is available at https://acpica.org/downloads

0) Global changes:

Allow disabling of -Werror. For distro maintainers having `-Werror`
can delay update of GCC. Since every GCC release might add new
warnings that were not yet captured, it might break the build of
packages. With this change, distros can now build with `NOWERROR=TRUE`
instead of patching either the errors or the makefiles. The default
behavior keeps on using `-Werror`.

1) ACPICA kernel-resident subsystem:

Added support for FFH Operation Region special context data.
FFH(Fixed Function Hardware) Opregion is approved to be added in
ACPI 6.5 via code first approach[1]. It requires special context
data similar to GPIO and Generic Serial Bus as it needs to know
platform specific offset and length.

Reverted this commit "executer/exsystem: Warn about sleeps greater
than 10 ms." Due to user complaints about valid sleeps greater than
10ms seen in some existing machines -- generating lots of warnings.

Do not touch VGA memory when EBDA < 1KiB. The ACPICA code assumes
that EBDA region must be at least 1KiB in size. Because this is
not guaranteed, it might happen that while scanning the memory for
RSDP pointer, the kernel touches memory above 640KiB. This is
unwanted as the VGA memory range may not be decoded or even present
when running under virtualization.

Check that EBDA pointer is in valid memory. If the memory at 0x40e
is uninitialized, the retrieved physical memory address of EBDA
may be beyond the low memory (i.e. above 640K). If so, the kernel
may unintentionally access the VGA memory, that might not be decoded
or even present in case of virtualization.

2) iASL Compiler/Disassembler and ACPICA tools:

Completed the existing partial support for the CDAT "table". Although
this isn't technically an ACPI table (It doesn't go into the XSDT),
it is possible to support this table in the Data Table compiler.
Created one new file, "utilities/utcksum.c", used to centralize
checksum generation/validation into one location. Includes changes
to makefiles and MSVC project files.

Updated support for the IORT table - update to version E.e

Added CXL 3.0 structures (CXIMS & RDPAS) to the CEDT table

iASL: Added CCEL table to both compiler/disassembler.

iASL: NHLT table: Fixed compilation of optional undocumented fields

iASL: Fix iASL compile error due to ACPI_TDEL_OFFSET. Commit #
10e4763 ("iASL: Add CCEL table to both compiler/disassembler")
introduced the iASL build issue. The issue is due to using
ACPI_TDEL_OFFSET for CCEL table member reference. To fix it, change
ACPI_TDEL_OFFSET with ACPI_CCEL_OFFSET.

show more ...

Import acpica-2022-03-31
----------------------------------------
31 March 2022. Summary of changes for version 20220331:

0) Global changes:

Update all copyright notices to the year 2022. This effe

Import acpica-2022-03-31
----------------------------------------
31 March 2022. Summary of changes for version 20220331:

0) Global changes:

Update all copyright notices to the year 2022. This effects all source
modules, as well as utility signons.


1) ACPICA kernel-resident subsystem:

For the ASL Sleep() operator, issue a warning if the sleep value is
greater than 10 Milliseconds. Quick boottime is important, so warn about
sleeps greater than 10 ms. Distribution Linux kernels reach initrd in 350
ms, so excessive delays should be called out. 10 ms is chosen randomly,
but three of such delays would already make up ten percent of the
boottime.

Namespace: Avoid attempting to walk the Namespace if the Namespace does
not exist.

AML interpreter/iASL compiler: Add new Acpi 6.4 semantics for the
LoadTable and Load operators. DDB_HANDLE is gone, now loadtable returns a
pass/fail integer. Now load returns a pass/fail integer, as well as
storing the return value in an optional 2nd argument.

Headers: Use uintptr_t and offsetof() in Linux kernel builds. To avoid
"performing pointer subtraction with a null pointer has undefined
behavior" compiler warnings, use uintptr_t and offsetof() that are always
available during Linux kernel builds to define ACPI_UINTPTR_T and the
ACPI_TO_INTEGER() and ACPI_OFFSET() macros when building the ACPICA code
in the Linux kernel.

Added support for the Windows 11 _OSI string ("Windows 2021"). Submitted
by superm1.

executer/exsystem: Inform users about ACPI spec violation for the Stall()
operator. Values greater than 100 microseconds violate the ACPI
specification, so warn users about it. From the ACPI Specification
version 6.2 Errata A, 19.6.128 *Stall (Stall for a Short Time)*:
> The implementation of Stall is OS-specific, but must not relinquish
> control of the processor. Because of this, delays longer than 100
> microseconds must use Sleep instead of Stall.


2) iASL Compiler/Disassembler and ACPICA tools:

Data Table Compiler/Disassembler: Add support for the APMT table - ARM
Performance Monitoring Unit table. Submitted by @bwicaksononv.

Data Table Compiler/Disassembler: For MADT, add support for the OEM-
defined subtables (Types 0x80-0x7F).

Data Table Compiler: Fixed a problem with support for the SDEV table,
where a subtable Length was not computed correctly.

Data Table Compiler/Disassembler: Add/fix the CFMWS subtable to the CEDT
Acpi table support.

Data Table Compiler/Disassembler: Fix a compile issue with the CEDT and
add template. Submitted by MasterDrogo.

Data Table Compiler/Disassembler: NHLT Changes provided by Piotr Maziarz:
iASL/NHLT: Rename linux specific structures to DeviceInfo to improve
readability of the code.
iASL/NHLT: Fix parsing undocumented bytes at the end of Endpoint.
Undocumented bytes at the end of Endpoint Descriptor can be present
independently of Linux-specific structures. Their size can also vary.
iASL/NHLT: Treat TableTerminator as SpecificConfig. SpecificConfig has 4
bytes of size and then an amount of bytes specified by size. All of the
terminators that I've seen had a size equal to 4, but theoretically it
can vary.

iASL/AcpiExec: Use _exit instead of exit in signal handers (ctrl-C).

iASL: Remove a remark due to excessive output. Removed a remark for
duplicate Offset() operators, due to a user complaint.

show more ...

31 March 2021. Summary of changes for version 20210331:

This release is available at https://acpica.org/downloads, and
includes all ACPI 6.4 support

1) ACPICA kernel-resident subsystem:
ACPI 6.4: i

31 March 2021. Summary of changes for version 20210331:

This release is available at https://acpica.org/downloads, and
includes all ACPI 6.4 support

1) ACPICA kernel-resident subsystem:
ACPI 6.4: iASL: deprecate DDBHandleObj keyword
Always create namespace nodes using AcpiNsCreateNode(). ACPICA is
allocating an object using kmalloc(), but then frees it using
kmem_cache_free(<"Acpi-Namespace" kmem_cache>). This is wrong.
Fixed a race condition in generic serial bus operation region
handler. Fixed by Hans de Goede.

2) iASL Compiler/Disassembler and ACPICA tools:

ACPI 6.4: NFIT: add Location Cookie field
ACPI 6.4: HMAT: add new fields/flags
ACPI 6.4: Add new flags in SRAT
ACPI 6.4: add SDEV secure access components
ACPI 6.4: add Csi2Bus resource template
ACPI 6.4: add support for PHAT table
ACPI 6.4: add support for PMTT table
Add disassembly support for the IVRS table. Compilation of the
table is not yet complete. Fixed a potential infinite loop due to
type mismatch. The for-loop is using a UINT8 counter and comparing
the upper limit against a UINT32 AslGbl_ExpectedMessagesIndex
maximum. In the case where AslGbl_ExpectedMessagesIndex is > 255
the counter i will wrap around to zero and the loop will never
exit. I suspect the AslGbl_ExpectedMessagesIndex is never that
high, but fixing this does future proof the code and cleans up
static analysis warnings.Colin King.

iASL/TableCompiler: update it with IORT table E.b revision changes.
From shamiali2008.
iASL/TableCompiler: Add compilation support for the VIOT table.
Signed-off-by: Jean-Philippe Brucker.
iASL/TableCompiler: Add compilation support for CEDT table.
Also, update the CEDT template.

show more ...

13 November 2020. Summary of changes for version 20201113:

This release is available at https://acpica.org/downloads

1) ACPICA kernel-resident subsystem:

Interpreter: fixed a memory leak by using

13 November 2020. Summary of changes for version 20201113:

This release is available at https://acpica.org/downloads

1) ACPICA kernel-resident subsystem:

Interpreter: fixed a memory leak by using use existing buffer in
_HID repair. There was a memory leak that occurred when a _CID
object is defined as a package containing string objects. When _CID
is checked for any possible repairs, it calls a helper function to
repair _HID (because _CID basically contains multiple _HID entries).
The _HID repair function assumes that string objects are standalone
objects that are not contained inside of any packages. The _HID
repair function replaced the string object with a brand new object
and attempted to delete the old object by decrementing the reference
count of the old object. Strings inside of packages have a reference
count of 2 so the _HID repair function leaves this object in a
dangling state and causes a memory leak. Instead of allocating a
brand new object and removing the old object, use the existing
object when repairing the _HID object.

Added function trace macros to improve namespace debugging. The
namespace repair mechanism does not have function tracing macros.
Add several trace macros to improve debuggability.

Handle "orphan" _REG methods for GPIO OpRegions. Before this change
AcpiEvExecuteRegMethods() had special handling to handle "orphan"
(no matching OpRegion declared) _REG methods for EC nodes. On Intel
Cherry Trail devices there are 2 possible ACPI OpRegions for
accessing GPIOs. The standard GeneralPurposeIo OpRegion and the
Cherry Trail - specific UserDefined 0x9X OpRegions. Having 2
different types of OpRegions leads to potential issues with checks
for OpRegion availability, or in other words checks if _REG has
been called for the OpRegion which the ACPI code wants to use.
Except for the "orphan" EC handling, ACPICA core does not call _REG
on an ACPI node which does not define an OpRegion matching the type
being registered; and the reference design DSDT, from which most
Cherry Trail DSDTs are derived, does not define GeneralPurposeIo,
nor UserDefined(0x93) OpRegions for the GPO2 (UID 3) device, because
no pins were assigned ACPI controlled functions in the reference
design. Together this leads to the perfect storm, at least on the
Cherry Trail based Medion Akayo E1239T. This design does use a GPO2
pin from its ACPI code and has added the Cherry Trail specific
UserDefined(0x93) opregion to its GPO2 ACPI node to access this
pin. But it uses a "has _REG been called" availability check for
the standard GeneralPurposeIo OpRegion. This clearly is a bug in
the DSDT, but this does work under Windows. This issue leads to
the intel vbtn driver reporting the device always being in tablet-mode
at boot, even if it is in laptop mode. Which in turn causes userspace
to ignore touchpad events. So in other words, this issue causes
the touchpad to not work at boot. This change fixes this by extending
the "orphan" _REG method handling to also apply to GPIO address-space
handlers.

2) iASL Compiler/Disassembler and ACPICA tools:

iASL: Added more info to namespace dump file (-ln option). In a
separate section of the dump file (after the main namespace dump),
emit the full pathname for each namespace node, its type, and the
ASL filename and line number where it is declared.

AcpiHelp: Added an option to display/decode iASL exceptions. Option
is: -x [Hex Value] where "Hex Value" is the iASL exception code.
If Hex Value is omitted, all iASL exceptions are displayed.

iASL: Use StringLiteral instead of StringData for some ASL macros.
The use of the stringData rule allows for some "string" oriented
opcodes (Such as ToString, ToHexString, etc.) None of which make
sense with the macros in question. This change modifies the StringData
part of the rule for these macros to a simple string literal - thus
disallowing the use of ToString, ToHexString, etc. The following
ASL operators (macros) are affected: EisaId Fprintf Printf ToUuid
Unicode Note: The MS compiler requires the use of string literals
for these operators also.

iASL: Added a remark for an unknown UUID: ASL_MSG_UUID_NOT_FOUND.
Search the list of "known" UUIDs for the input to the ToUUID macro.

Added 5 new UUIDs to the known UUID table. All related to NVDIMM
and the NFIT table.

show more ...

----------------------------------------
26 March 2020. Summary of changes for version 20200326:


1) ACPICA kernel-resident subsystem:

Performed a code clean-up to prevent build errors on early ver

----------------------------------------
26 March 2020. Summary of changes for version 20200326:


1) ACPICA kernel-resident subsystem:

Performed a code clean-up to prevent build errors on early versions of
GCC-10.

Added the NHLT table signature. iASL data table compiler/disassembler
support for this table is coming soon.


2) iASL Compiler/Disassembler and ACPICA tools:

AcpiExec: Fixed several problems with the namespace initialization file
(-fi<filename> option). Includes fixes to prevent AE_ALREADY_EXISTS
errors, several seg faults, and enhancements to line parsing within the
init file. In addition, each object found in the init file and it's new
value is displayed, as well as any such entries that do not have a
corresponding name in the namespace. For reference, the syntax for the
various supported data types are presented below:
PCHG 0x777788889999BBBB // Integer
\DEV1.STR1 "XYZ" // String
BUF1 (88 99 AA) // Buffer
PKG1 [0x1111 0x2222] // Package
\BF1 0x7980 // BufferField
RCRV 0x0123456789ABCDEF // Field Unit

iASL: Added a custom iASL macro __EXPECT__(iASL-Error-Code). This macro
can be used anywhere in a given ASL file to configure iASL to expect an
iASL compiler error code on the line where this macro was placed. If the
error code does not exist, an error is generated. This is intended to be
used for ACPICA's ASL test suite, but can be used by ASL developers as
well.

iASL: table compiler: Implemented IVRS IVHD type 11h parsing. The AMD
IVRS table parsing supported only IVHD type 10h structures. Parsing an
IVHD type 11h caused the iasl to report unknown subtable type. Add
necessary structure definition for IVHD type 11h and apply correct
parsing method based on subtable type. Micha? ?ygowski.

iASL: table compiler: Fixed IVRS table IVHD type 10h reserved field name
According to AMD IOMMU Specification Revision 3.05 the reserved field
should be IOMMU Feature Reporting. Change the name of the field to the
correct one. Micha? ?ygowski.

acpiexec: removed redeclaration of AcpiGbl_DbOpt_NoRegionSupport. Patch
based on suggestions by David Seifert and Benjamin Berg.

iASL: table compiler: removed an unused variable (DtCompilerParserResult)
causing linking errors. Patch based on suggestions by David Seifert and
Benjamin Berg.

iASL: table compiler: make LexBuffer static to avoid linking errors in
newer compilers. Patch based on suggestions by David Seifert and Benjamin
Berg.

iASL: fixed type matching between External and Named objects. External
object types can only be expressed with ACPI object type values that are
defined in the ACPI spec. However, iASL uses ACPI object type values that
are local to ACPICA in addition to the values defined in the ACPI spec.
This change implements type matching to map some object type values
specific to ACPICA to ones that are defined in the ACPI spec.

iASL: Dropped the type mismatch compiler error that can arise from
External declarations to a warning. This warning can occur when there is
a type difference between the external declaration and the actual object
declaration (when compiling multiple files/modules simultaneously).

iASL: removed an incorrect error message regarding externals. This change
removes an incorrect error that is emitted when a duplicate external
declaration does not contain a type that opens a scope. This is incorrect
because the duplicate external with conflicting types are already caught
by iASL and it doesn't make any sense to enforce what this conflicting
type should be.

AcpiXtract: fix AX_IS_TABLE_BLOCK_HEADER macro. This macro needs to be
surrounded by parens. Otherwise, a logical statement that applies a
logical not operator to this macro could result in a computation that
applies the operator to the left side of the logical and but not the
right. Reported-by: John Levon <john.levon@joyent.com>

Fixed a problem with the local version of sprint(): On 32-bit, the
provided sprintf() is non-functional: with a size of ACPI_UINT32_MAX,
String + Size will wrap, meaning End < Start, and
AcpiUtBoundStringOutput() will never output anything as a result. The
symptom seen of this was acpixtract failing to output anything -- with a
custom build that included utprint.c. Signed-off-by: John Levon
<john.levon@joyent.com>

iASL: Changed the "PlatformCommChannel" ASL keyword to "PCC", as per the
ACPI specification.


----------------------------------------
14 February 2020. Summary of changes for version 20200214:


1) ACPICA kernel-resident subsystem:

Enable sleep button on ACPI legacy wake: Hibernation (S4) is triggered
in a guest when it receives a sleep trigger from the hypervisor. When the
guest resumes from this power state, it does not see the SleepEnabled
bit. In other words, the sleepHibernation (S4) is triggered in a guest
when it receives a sleep trigger from the hypervisor. When the guest
resumes from this power state, it does not see the SleepEnabled bit. In
other words, the sleep button is not enabled on waking from an S4 state.
This causes subsequent invocation of sleep state to fail since the
guest.button is not enabled on waking from an S4 state. This causes
subsequent invocation of sleep state to fail in the guest. Fix this
problem by enabling the sleep button in ACPI legacy wake. From Anchal
Agarwal <anchalag@amazon.com>.

Implemented a new external interface, AcpiAnyGpeStatusSet (). To be used
for checking the status bits of all enabled GPEs in one go. It is needed
to distinguish spurious SCIs from genuine ones when deciding whether or
not to wake up the system from suspend-to-idle.

Generic Makefiles: replace HOST name with ACPI_HOST: Some machines may be
using HOST in their environment to represent the host name for their
machines. Avoid this problem by renaming this variable from HOST to
ACPI_HOST.

MSVC 2017 project files: Enable multiprocessor generation to improve
build performance.

Added a macro to get the byte width of a Generic Address structure. New
ACPI_ACCESS_BYTE_WIDTH is in addition to the existing
ACPI_ACCESS_BIT_WIDTH. From Mika Westerberg.


2) iASL Compiler/Disassembler and ACPICA tools:

iASL: Implemented full support for the (optional, rarely used) ReturnType
and ParameterTypesList for the Method, Function, and External operators.
For Method declarations, the number of individual ParameterTypes must
match the declaration of the number of arguments (NumArgs). This also
Fixes a problem with the External operator where extra/extraneous bytes
were emitted in the AML code if the optional ReturnType/ParameterTypes
were specified for a MethodObj declaration.
New error message:
1) Method NumArgs count does not match length of ParameterTypes list

iASL: Implemented detection of type mismatches between External
declarations and named object declarations. Also, detect type mismatches
between multiple External declarations of the same Name.
New error messages:
1) Type mismatch between external declaration and actual object
declaration detected
2) Type mismatch between multiple external declarations detected

iASL: Implemented new error messages for External operators that specify
a ReturnType and/or ParameterTypesList for any object type other than
control methods (MethodObj).
New error messages:
1) Return type is only allowed for Externals declared as MethodObj
2) Parameter type is only allowed for Externals declared as MethodObj

iASL: Implemented two new remark/warning messages for ASL code that
creates named objects from within a control method. This is very
inefficient since the named object must be created and deleted each time
the method is executed.
New messages:
1) Creation of named objects within a method is highly inefficient, use
globals or method local variables instead (remark)
2) Static OperationRegion should be declared outside control method
(warning)

iASL: Improved illegal forward reference detection by adding support to
detect forward-reference method invocations.

iASL: Detect and issue an error message for NameStrings that contain too
many individual NameSegs (>255). This is an AML limitation that is
defined in the ACPI specification.
New message:
1) NameString contains too many NameSegs (>255)

acpidump: windows: use GetSystemFirmwareTable API for all tables except
SSDT. By using this API, acpidump is able to get all tables in the XSDT

iASL: Removed unused parser file and updated msvc2017 project files.
Removed the obsolete AslCompiler.y from the repository.

iASL: msvc2017: Fixed macros in the file dependency list to prevent
unnecessary rebuilds. Replace %(Directory) with %(RelativeDir).

Disassembler: Prevent spilling error messages to the output file. All
errors are directed to the console instead. These error messages
prevented re-compilation of the resulting disassembled ASL output file
(.DSL).


----------------------------------------
10 January 2020. Summary of changes for version 20200110:


1) ACPICA kernel-resident subsystem:

Updated all copyrights to 2020. This affects all ACPICA source code
modules.


2) iASL Compiler/Disassembler and ACPICA tools:

ASL test suite (ASLTS): Updated all copyrights to 2020.

Tools and utilities: Updated all signon copyrights to 2020.

iASL: fix forward reference analysis for field declarations. Fixes
forward reference analysis for field declarations by searching the
parent scope for the named object when the object is not present in
the current scope.

iASL: Improved the error output for ALREADY_EXISTS errors. Now, the
full pathname of the name that already exists is printed.

iASL: Enhance duplicate Case() detection for buffers. Add check for
buffers with no initializer list (these buffers will be filled with
zeros at runtime.)

show more ...

----------------------------------------
05 April 2019. Summary of changes for version 20190405:


1) ACPICA kernel-resident subsystem:

Event Manager: History: Commit 18996f2db918 ("ACPICA: Events:

----------------------------------------
05 April 2019. Summary of changes for version 20190405:


1) ACPICA kernel-resident subsystem:

Event Manager: History: Commit 18996f2db918 ("ACPICA: Events: Stop
unconditionally clearing ACPI IRQs during suspend/resume") was added
earlier to stop clearing of event status bits unconditionally on suspend
and resume paths. Though this change fixed an issue on suspend path, it
introduced regressions on several resume paths. In the case of S0ix,
events are enabled as part of device suspend path. If status bits for the
events are set when they are enabled, it could result in premature wake
from S0ix. If status is cleared for any event that is being enabled so
that any stale events are cleared out. In case of S0ix, events are
enabled as part of device suspend path. If status bits for the events are
set when they are enabled, it could result in premature wake from S0ix.

This change ensures that status is cleared for any event that is being
enabled so that any stale events are cleared out.


2) iASL Compiler/Disassembler and ACPICA tools:

iASL: Implemented an enhanced multiple file compilation that combines
named objects from all input files to a single namespace. With this
feature, any unresolved external declarations as well as duplicate named
object declarations can be detected during compilation rather than
generating errors much later at runtime. The following commands are
examples that utilize this feature:
iasl dsdt.asl ssdt.asl
iasl dsdt.asl ssdt1.asl ssdt2.asl
iasl dsdt.asl ssdt*.asl

----------------------------------------
29 March 2019. Summary of changes for version 20190329:


1) ACPICA kernel-resident subsystem:

Namespace support: Remove the address nodes from global list after method
termination. The global address list contains pointers to namespace nodes
that represent Operation Regions. This change properly removes Operation
Region namespace nodes that are declared dynamically during method
execution.

Linux: Use a different debug default than ACPICA. There was a divergence
between Linux and the ACPICA codebases. In order to resolve this
divergence, Linux now declares its own debug default in aclinux.h

Renamed some internal macros to improve code understanding and
maintenance. The macros below all operate on single 4-character ACPI
NameSegs, not generic strings (old -> new):
ACPI_NAME_SIZE -> ACPI_NAMESEG_SIZE
ACPI_COMPARE_NAME -> ACPI_COMPARE_NAMESEG
ACPI_MOVE_NAME -> ACPI_COPY_NAMESEG

Fix for missing comma in array declaration for the AcpiGbl_GenericNotify
table.

Test suite: Update makefiles, add PCC operation region support


2) iASL Compiler/Disassembler and Tools:

iASL: Implemented additional illegal forward reference detection. Now
detect and emit an error upon detection of a forward reference from a
Field to an Operation Region. This will fail at runtime if allowed to
pass the compiler.

AcpiExec: Add an address list check for dynamic Operation Regions. This
feature performs a sanity test for each node the global address list.
This is done in order to ensure that all dynamic operation regions are
properly removed from the global address list and no dangling pointers
are left behind.

Disassembler: Improved generation of resource pathnames. This change
improves the code that generates resource descriptor and resource tag
pathnames. The original code used a bunch of str* C library functions
that caused warnings on some compilers.

iASL: Removed some uses of strncpy and replaced with memmove. The strncpy
function can overwrite buffers if the calling code is not very careful.
In the case of generating a module/table header, use of memmove is a
better implementation.


3) Status of new features that have not been completed at this time:

iASL: Implementing an enhanced multiple file compilation into a single
namespace feature (Status): This feature will be released soon, and
allows multiple ASL files to be compiled into the same single namespace.
By doing so, any unresolved external declarations as well as duplicate
named object declarations can be detected during compilation (rather than
later during runtime). The following commands are examples that utilize
this feature:
iasl dsdt.asl ssdt.asl
iasl dsdt.asl ssdt1.asl ssdt2.asl
iasl dsdt.asl ssdt*.asl

ASL tutorial status: Feedback is being gathered internally and the
current plan is to publish this tutorial on the ACPICA website after a
final review by a tech writer.

----------------------------------------
15 February 2019. Summary of changes for version 20190215:


0) Support for ACPI specification version 6.3:

Add PCC operation region support for the AML interpreter. This adds PCC
operation region support in the AML interpreter and a default handler for
acpiexec. The change also renames the PCC region address space keyword to
PlatformCommChannel.

Support for new predefined methods _NBS, _NCH, _NIC, _NIH, and _NIG.
These methods provide OSPM with health information and device boot
status.

PDTT: Add TriggerOrder to the PCC Identifier structure. The field value
defines if the trigger needs to be invoked by OSPM before or at the end
of kernel crash dump processing/handling operation.

SRAT: Add Generic Affinity Structure subtable. This subtable in the SRAT
is used for describing devices such as heterogeneous processors,
accelerators, GPUs, and IO devices with integrated compute or DMA
engines.

MADT: Add support for statistical profiling in GICC. Statistical
profiling extension (SPE) is an architecture-specific feature for ARM.

MADT: Add online capable flag. If this bit is set, system hardware
supports enabling this processor during OS runtime.

New Error Disconnect Recover Notification value. There are a number of
scenarios where system Firmware in collaboration with hardware may
disconnect one or more devices from the rest of the system for purposes
of error containment. Firmware can use this new notification value to
alert OSPM of such a removal.

PPTT: New additional fields in Processor Structure Flags. These flags
provide more information about processor topology.

NFIT/Disassembler: Change a field name from "Address Range" to "Region
Type".

HMAT updates: make several existing fields to be reserved as well as
rename subtable 0 to "memory proximity domain attributes".

GTDT: Add support for new GTDT Revision 3. This revision adds information
for the EL2 timer.

iASL: Update the HMAT example template for new fields.

iASL: Add support for the new revision of the GTDT (Rev 3).


1) ACPICA kernel-resident subsystem:

AML Parser: fix the main AML parse loop to correctly skip erroneous
extended opcodes. AML opcodes come in two lengths: 1-byte opcodes and 2-
byte extended opcodes. If an error occurs during an AML table load, the
AML parser will continue loading the table by skipping the offending
opcode. This implements a "load table at any cost" philosophy.


2) iASL Compiler/Disassembler and Tools:

iASL: Add checks for illegal object references, such as a reference
outside of method to an object within a method. Such an object is only
temporary.

iASL: Emit error for creation of a zero-length operation region. Such a
region is rather pointless. If encountered, a runtime error is also
implemented in the interpeter.

Debugger: Fix a possible fault with the "test objects" command.

iASL: Makefile: support parent directory filenames containing embedded
spaces.

iASL: Update the TPM2 template to revision 4.

iASL: Add the ability to report specific warnings or remarks as errors.

Disassembler: Disassemble OEMx tables as actual AML byte code.
Previously, these tables were treated as "unknown table".

iASL: Add definition and disassembly for TPM2 revision 3.

iASL: Add support for TPM2 rev 3 compilation.


----------------------------------------
08 January 2019. Summary of changes for version 20190108:


1) ACPICA kernel-resident subsystem:

Updated all copyrights to 2019. This affects all source code modules.


2) iASL Compiler/Disassembler and Tools:

ASL test suite (ASLTS): Updated all copyrights to 2019.

Tools: Updated all signon copyrights to 2019.

AcpiExec: Added a new option to dump extra information concerning any
memory leaks detected by the internal object/cache tracking mechanism. -
va

iASL: Updated the table template for the TPM2 table to the newest version
of the table (Revision 4)

show more ...

----------------------------------------
13 March 2018. Summary of changes for version 20180313:


1) ACPICA kernel-resident subsystem:

Implemented various improvements to the GPE support:

1) Dispa

----------------------------------------
13 March 2018. Summary of changes for version 20180313:


1) ACPICA kernel-resident subsystem:

Implemented various improvements to the GPE support:

1) Dispatch all active GPEs at initialization time so that no GPEs are
lost.
2) Enable runtime GPEs earlier. Some systems expect GPEs to be enabled
before devices are enumerated.
3) Don't unconditionally clear ACPI IRQs during suspend/resume, so that
IRQs are not lost.
4) Add parallel GPE handling to eliminate the possibility of dispatching
the same GPE twice.
5) Dispatch any pending GPEs after enabling for the first time.

AcpiGetObjectInfo - removed support for the _STA method. This was causing
problems on some platforms.

Added a new _OSI string, "Windows 2017.2".

Cleaned up and simplified the module-level code support. These changes
are in preparation for the eventual removal of the legacy MLC support
(deferred execution), replaced by the new MLC architecture which executes
the MLC as a table is loaded (DSDT/SSDTs).

Changed a compile-time option to a runtime option. Changes the option to
ignore ACPI table load-time package resolution errors into a runtime
option. Used only for platforms that generate many AE_NOT_FOUND errors
during boot. AcpiGbl_IgnorePackageResolutionErrors.

Fixed the ACPI_ERROR_NAMESPACE macro. This change involves putting some
ACPI_ERROR_NAMESPACE parameters inside macros. By doing so, we avoid
compilation errors from unused variables (seen with some compilers).


2) iASL Compiler/Disassembler and Tools:

ASLTS: parallelized execution in order to achieve an (approximately) 2X
performance increase.

ASLTS: Updated to use the iASL __LINE__ and __METHOD__ macros. Improves
error reporting.

----------------------------------------
09 February 2018. Summary of changes for version 20180209:


1) ACPICA kernel-resident subsystem:

Completed the final integration of the recent changes to Package Object
handling and the module-level AML code support. This allows forward
references from individual package elements when the package object is
declared from within module-level code blocks. Provides compatibility
with other ACPI implementations.

The new architecture for the AML module-level code has been completed and
is now the default for the ACPICA code. This new architecture executes
the module-level code in-line as the ACPI table is loaded/parsed instead
of the previous architecture which deferred this code until after the
table was fully loaded. This solves some ASL code ordering issues and
provides compatibility with other ACPI implementations. At this time,
there is an option to fallback to the earlier architecture, but this
support is deprecated and is planned to be completely removed later this
year.

Added a compile-time option to ignore AE_NOT_FOUND exceptions during
resolution of named reference elements within Package objects. Although
this is potentially a serious problem, it can generate a lot of
noise/errors on platforms whose firmware carries around a bunch of unused
Package objects. To disable these errors, define
ACPI_IGNORE_PACKAGE_RESOLUTION_ERRORS in the OS-specific header. All
errors are always reported for ACPICA applications such as AcpiExec.

Fixed a regression related to the explicit type-conversion AML operators
(ToXXXX). The regression was introduced early in 2017 but was not seen
until recently because these operators are not fully supported by other
ACPI implementations and are thus rarely used by firmware developers. The
operators are defined by the ACPI specification to not implement the
"implicit result object conversion". The regression incorrectly
introduced this object conversion for the following explicit conversion
operators:
ToInteger
ToString
ToBuffer
ToDecimalString
ToHexString
ToBCD
FromBCD


2) iASL Compiler/Disassembler and Tools:

iASL: Fixed a problem with the compiler constant folding feature as
related to the ToXXXX explicit conversion operators. These operators do
not support the "implicit result object conversion" by definition. Thus,
ASL expressions that use these operators cannot be folded to a simple
Store operator because Store implements the implicit conversion. This
change uses the CopyObject operator for the ToXXXX operator folding
instead. CopyObject is defined to not implement implicit result
conversions and is thus appropriate for folding the ToXXXX operators.

iASL: Changed the severity of an error condition to a simple warning for
the case where a symbol is declared both locally and as an external
symbol. This accommodates existing ASL code.

AcpiExec: The -ep option to enable the new architecture for module-level
code has been removed. It is replaced by the -dp option which instead has
the opposite effect: it disables the new architecture (the default) and
enables the legacy architecture. When the legacy code is removed in the
future, the -dp option will be removed also.

----------------------------------------
05 January 2018. Summary of changes for version 20180105:


1) ACPICA kernel-resident subsystem:

Updated all copyrights to 2018. This affects all source code modules.

Fixed a possible build error caused by an unresolved reference to the
AcpiUtSafeStrncpy function.

Removed NULL pointer arithmetic in the various pointer manipulation
macros. All "(void *) NULL" constructs are converted to "(void *) 0".
This eliminates warnings/errors in newer C compilers. Jung-uk Kim.

Added support for A32 ABI compilation, which uses the ILP32 model. Anuj
Mittal.


2) iASL Compiler/Disassembler and Tools:

ASLTS: Updated all copyrights to 2018.

Tools: Updated all signon copyrights to 2018.

AcpiXtract: Fixed a regression related to ACPI table signatures where the
signature was truncated to 3 characters (instead of 4).

AcpiExec: Restore the original terminal mode after the use of the -v and
-vd options.

ASLTS: Deployed the iASL __METHOD__ macro across the test suite.

----------------------------------------
14 December 2017. Summary of changes for version 20171214:


1) ACPICA kernel-resident subsystem:

Fixed a regression in the external (public) AcpiEvaluateObjectTyped
interface where the optional "pathname" argument had inadvertently become
a required argument returning an error if omitted (NULL pointer
argument).

Fixed two possible memory leaks related to the recently developed "late
resolution" of reference objects within ASL Package Object definitions.

Added two recently defined _OSI strings: "Windows 2016" and "Windows
2017". Mario Limonciello.

Implemented and deployed a safer version of the C library function
strncpy: AcpiUtSafeStrncpy. The intent is to at least prevent the
creation of unterminated strings as a possible result of a standard
strncpy.

Cleaned up and restructured the global variable file (acglobal.h). There
are many changes, but no functional changes.


2) iASL Compiler/Disassembler and Tools:

iASL Table Compiler: Fixed a problem with the DBG2 ACPI table where the
optional OemData field at the end of the table was incorrectly required
for proper compilation. It is now correctly an optional field.

ASLTS: The entire suite was converted from standard ASL to the ASL+
language, using the ASL-to-ASL+ converter which is integrated into the
iASL compiler. A binary compare of all output files has verified the
correctness of the conversion.

iASL: Fixed the source code build for platforms where "char" is unsigned.
This affected the iASL lexer only. Jung-uk Kim.

show more ...

----------------------------------------
10 November 2017. Summary of changes for version 20171110:


1) ACPICA kernel-resident subsystem:

This release implements full support for ACPI 6.2A:
NFI

----------------------------------------
10 November 2017. Summary of changes for version 20171110:


1) ACPICA kernel-resident subsystem:

This release implements full support for ACPI 6.2A:
NFIT - Added a new subtable, "Platform Capabilities Structure"
No other changes to ACPICA were required, since ACPI 6.2A is primarily an
errata release of the specification.

Other ACPI table changes:
IORT: Added the SMMUv3 Device ID mapping index. Hanjun Guo
PPTT: Added cache attribute flag definitions to actbl1.h. Jeremy
Linton

Utilities: Modified the string/integer conversion functions to use
internal 64-bit divide support instead of a native divide. On 32-bit
platforms, a 64-bit divide typically requires a library function which
may not be present in the build (kernel or otherwise).

Implemented a targeted error message for timeouts returned from the
Embedded Controller device driver. This is seen frequently enough to
special-case an AE_TIME returned from an EC operation region access:
"Timeout from EC hardware or EC device driver"

Changed the "ACPI Exception" message prefix to "ACPI Error" so that all
runtime error messages have the identical prefix.


2) iASL Compiler/Disassembler and Tools:

AcpiXtract: Fixed a problem with table header detection within the
acpidump file. Processing a table could be ended early if a 0x40 (@)
appears in the original binary table, resulting in the @ symbol appearing
in the decoded ASCII field at the end of the acpidump text line. The
symbol caused acpixtract to incorrectly think it had reached the end of
the current table and the beginning of a new table.

AcpiXtract: Added an option (-f) to ignore some errors during table
extraction. This initial implementation ignores non-ASCII and non-
printable characters found in the acpidump text file.

TestSuite(ASLTS)/AcpiExec: Fixed and restored the memory usage statistics
for ASLTS. This feature is used to track memory allocations from
different memory caches within the ACPICA code. At the end of an ASLTS
run, these memory statistics are recorded and stored in a log file.

Debugger (user-space version): Implemented a simple "Background" command.
Creates a new thread to execute a control method in the background, while
control returns to the debugger prompt to allow additional commands.
Syntax: Background <Namepath> [Arguments]

----------------------------------------
29 September 2017. Summary of changes for version 20170929:


1) ACPICA kernel-resident subsystem:

Redesigned and implemented an improved ASL While() loop timeout
mechanism. This mechanism is used to prevent infinite loops in the kernel
AML interpreter caused by either non-responsive hardware or incorrect AML
code. The new implementation uses AcpiOsGetTimer instead of a simple
maximum loop count, and is thus more accurate and constant across
different machines. The default timeout is currently 30 seconds, but this
may be adjusted later.

Renamed the ACPI_AML_INFINITE_LOOP exception to AE_AML_LOOP_TIMEOUT to
better reflect the new implementation of the loop timeout mechanism.

Updated the AcpiGetTimerDuration interface to cleanup the 64-bit support
and to fix an off-by-one error. Jung-uk Kim.

Fixed an EFI build problem by updating the makefiles to for a new file
that was added, utstrsuppt.c


2) iASL Compiler/Disassembler and Tools:

Implemented full support for the PDTT, SDEV, and TPM2 ACPI tables. This
includes support in the table disassembler, compiler, and template
generator.

iASL: Added an exception for an illegal type of recursive method
invocation. If a method creates named objects, the first recursive call
will fail at runtime. This change adds an error detection at compile time
to catch the problem up front. Note: Marking such a method as
"serialized" will not help with this problem, because the same thread can
acquire the method mutex more than once. Example compiler and runtime
output:

Method (MTH1)
{
Name (INT1, 1)
MTH1 ()
}

dsdt.asl 22: MTH1 ()
Error 6152 - ^ Illegal recursive call to method
that creates named objects (MTH1)

Previous runtime exception:
ACPI Error: [INT1] Namespace lookup failure,
AE_ALREADY_EXISTS (20170831/dswload2-465)

iASL: Updated support for External() opcodes to improve namespace
management and error detection. These changes are related to issues seen
with multiple-segment namespace pathnames within External declarations,
such as below:

External(\_SB.PCI0.GFX0, DeviceObj)
External(\_SB.PCI0.GFX0.ALSI)

iASL: Implemented support for multi-line error/warning messages. This
enables more detailed and helpful error messages as below, from the
initial deployment for the duplicate names error:

DSDT.iiii 1692: Device(PEG2) {
Error 6074 - ^ Name already exists in scope
(PEG2)

Original name creation/declaration below:
DSDT.iiii 93: External(\_SB.PCI0.PEG2, DeviceObj)

AcpiXtract: Added additional flexibility to support differing input hex
dump formats. Specifically, hex dumps that contain partial disassembly
and/or comments within the ACPI table data definition. There exist some
dump utilities seen in the field that create this type of hex dump (such
as Simics). For example:

DSDT @ 0xdfffd0c0 (10999 bytes)
Signature DSDT
Length 10999
Revision 1
Checksum 0xf3 (Ok)
OEM_ID BXPC
OEM_table_id BXDSDT
OEM_revision 1
Creator_id 1280593481
Creator_revision 537399345
0000: 44 53 44 54 f7 2a 00 00 01 f3 42 58 50 43 00 00
...
2af0: 5f 4c 30 46 00 a4 01

Test suite: Miscellaneous changes/fixes:
More cleanup and simplification of makefiles
Continue compilation of test cases after a compile failure
Do not perform binary compare unless both files actually exist

iASL: Performed some code/module restructuring. Moved all memory
allocation functions to new modules. Two new files, aslallocate.c and
aslcache.c

show more ...

One more time in the right place...

----------------------------------------
19 January 2017. Summary of changes for version 20170119:

This release is available at https://acpica.org/downloads

1)

One more time in the right place...

----------------------------------------
19 January 2017. Summary of changes for version 20170119:

This release is available at https://acpica.org/downloads

1) General ACPICA software:

Entire source code base: Added the 2017 copyright to all source code
legal/licensing module headers and utility/tool signons. This includes
the standard Linux dual-license header. This affects virtually every file
in the ACPICA core subsystem, iASL compiler, all ACPICA utilities, and
the ACPICA test suite.


2) iASL Compiler/Disassembler and Tools:

iASL: Removed/fixed an inadvertent remark when a method argument
containing a reference is used as a target operand within the method (and
never used as a simple argument), as in the example below. Jeffrey Hugo.

dsdt.asl 1507: Store(0x1, Arg0)
Remark 2146 - ^ Method Argument is never used (Arg0)

All tools: Removed the bit width of the compiler that generated the tool
from the common signon for all user space tools. This proved to be
confusing and unnecessary. This includes similar removal of HARDWARE_NAME
from the generic makefiles (Thomas Petazzoni). Example below.

Old:
ASL+ Optimizing Compiler version 20170119-32
ASL+ Optimizing Compiler version 20170119-64

New:
ASL+ Optimizing Compiler version 20170119

----------------------------------------
22 December 2016. Summary of changes for version 20161222:


1) ACPICA kernel-resident subsystem:

AML Debugger: Implemented a new mechanism to simplify and enhance
debugger integration into all environments, including kernel debuggers
and user-space utilities, as well as remote debug services. This
mechanism essentially consists of new OSL interfaces to support debugger
initialization/termination, as well as wait/notify interfaces to perform
the debugger handshake with the host. Lv Zheng.

New OSL interfaces:
AcpiOsInitializeDebugger (void)
AcpiOsTerminateDebugger (void)
AcpiOsWaitCommandReady (void)
AcpiOsNotifyCommandComplete (void)

New OS services layer:
osgendbg.c -- Example implementation, and used for AcpiExec

Update for Generic Address Space (GAS) support: Although the AccessWidth
and/or BitOffset fields of the GAS are not often used, this change now
fully supports these fields. This affects the internal support for FADT
registers, registers in other ACPI data tables, and the AcpiRead and
AcpiWrite public interfaces. Lv Zheng.

Sleep support: In order to simplify integration of ACPI sleep for the
various host operating systems, a new OSL interface has been introduced.
AcpiOsEnterSleep allows the host to perform any required operations
before the final write to the sleep control register(s) is performed by
ACPICA. Lv Zheng.

New OSL interface:
AcpiOsEnterSleep(SleepState, RegisterAValue, RegisterBValue)

Called from these internal interfaces:
AcpiHwLegacySleep
AcpiHwExtendedSleep

EFI support: Added a very small EFI/ACPICA example application. Provides
a simple demo for EFI integration, as well as assisting with resolution
of issues related to customer ACPICA/EFI integration. Lv Zheng. See:

source/tools/efihello/efihello.c

Local C library: Implemented several new functions to enhance ACPICA
portability, for environments where these clib functions are not
available (such as EFI). Lv Zheng:
putchar
getchar
strpbrk
strtok
memmove

Fixed a regression where occasionally a valid resource descriptor was
incorrectly detected as invalid at runtime, and a
AE_AML_NO_RESOURCE_END_TAG was returned.

Fixed a problem with the recently implemented support that enables
control method invocations as Target operands to many ASL operators.
Warnings of this form: "Needed type [Reference], found [Processor]" were
seen at runtime for some method invocations.

Example Code and Data Size: These are the sizes for the OS-independent
acpica.lib produced by the Microsoft Visual C++ 9.0 32-bit compiler. The
debug version of the code includes the debug output trace mechanism and
has a much larger code and data size.

Current Release:
Non-Debug Version: 141.5K Code, 58.5K Data, 200.0K Total
Debug Version: 201.7K Code, 82.7K Data, 284.4K Total
Previous Release:
Non-Debug Version: 140.5K Code, 58.5K Data, 198.9K Total
Debug Version: 201.3K Code, 82.7K Data, 284.0K Total


2) iASL Compiler/Disassembler and Tools:

Disassembler: Enhanced output by adding the capability to detect and
disassemble ASL Switch/Case statements back to the original ASL source
code instead of if/else blocks. David Box.

AcpiHelp: Split a large file into separate files based upon
functionality/purpose. New files are:
ahaml.c
ahasl.c

----------------------------------------
17 November 2016. Summary of changes for version 20161117:


1) ACPICA kernel-resident subsystem:

Table Manager: Fixed a regression introduced in 20160729, "FADT support
cleanup". This was an attempt to remove all references in the source to
the FADT version 2, which never was a legal version number. It was
skipped because it was an early version of 64-bit support that was
eventually abandoned for the current 64-bit support.

Interpreter: Fixed a problem where runtime implicit conversion was
incorrectly disabled for the ASL operators below. This brings the
behavior into compliance with the ACPI specification:
FromBCD
ToBCD
ToDecimalString
ToHexString
ToInteger
ToBuffer

Table Manager: Added a new public interface, AcpiPutTable, used to
release and free an ACPI table returned by AcpiGetTable and related
interfaces. Lv Zheng.

Example Code and Data Size: These are the sizes for the OS-independent
acpica.lib produced by the Microsoft Visual C++ 9.0 32-bit compiler. The
debug version of the code includes the debug output trace mechanism and
has a much larger code and data size.

Current Release:
Non-Debug Version: 140.5K Code, 58.5K Data, 198.9K Total
Debug Version: 201.3K Code, 82.7K Data, 284.0K Total
Previous Release:
Non-Debug Version: 140.4K Code, 58.1K Data, 198.5K Total
Debug Version: 200.7K Code, 82.1K Data, 282.8K Total


2) iASL Compiler/Disassembler and Tools:

Disassembler: Fixed a regression for disassembly of Resource Template.
Detection of templates in the AML stream missed some types of templates.

iASL: Fixed a problem where an Access Size error was returned for the PCC
address space when the AccessSize of the GAS register is greater than a
DWORD. Hoan Tran.

iASL: Implemented several grammar changes for the operators below. These
changes are slated for the next version of the ACPI specification:
RefOf - Disallow method invocation as an operand
CondRefOf - Disallow method invocation as an operand
DerefOf - Disallow operands that use the result from operators
that
do not return a reference (Changed TermArg to
SuperName).

iASL: Control method invocations are now allowed for Target operands, as
per the ACPI specification. Removed error for using a control method
invocation as a Target operand.

Disassembler: Improved detection of Resource Templates, Unicode, and
Strings within Buffer objects. These subtypes do not contain a specific
opcode to indicate the originating ASL code, and they must be detected by
other means within the disassembler.

iASL: Implemented an optimization improvement for 32-bit ACPI tables
(DSDT/SSDT). For the 32-bit case only, compute the optimum integer opcode
only after 64-bit to 32-bit truncation. A truncation warning message is
still emitted, however.

AcpiXtract: Implemented handling for both types of line terminators (LF
or CR/LF) so that it can accept AcpiDump output files from any system.
Peter Wu.

AcpiBin: Added two new options for comparing AML files:
-a: compare and display ALL mismatches
-o: start compare at this offset into the second file

show more ...

Import acpica-20160930:

----------------------------------------
30 September 2016. Summary of changes for version 20160930:


1) ACPICA kernel-resident subsystem:

Fixed a regression in the interna

Import acpica-20160930:

----------------------------------------
30 September 2016. Summary of changes for version 20160930:


1) ACPICA kernel-resident subsystem:

Fixed a regression in the internal AcpiTbFindTable function where a non
AE_OK exception could inadvertently be returned even if the function did
not fail. This problem affects the following operators:
DataTableRegion
LoadTable

Fixed a regression in the LoadTable operator where a load to any
namespace location other than the root no longer worked properly.

Increased the maximum loop count value that will result in the
AE_AML_INFINITE_LOOP exception. This is a mechanism that is intended to
prevent infinite loops within the AML interpreter and thus the host OS
kernel. The value is increased from 0xFFFF to 0xFFFFF loops (65,535 to
1,048,575).

Moved the AcpiGbl_MaxLoopIterations configuration variable to the public
acpixf.h file. This allows hosts to easily configure the maximum loop
count at runtime.

Removed an illegal character in the strtoul64.c file. This character
caused errors with some C compilers.

Example Code and Data Size: These are the sizes for the OS-independent
acpica.lib produced by the Microsoft Visual C++ 9.0 32-bit compiler. The
debug version of the code includes the debug output trace mechanism and
has a much larger code and data size.

Current Release:
Non-Debug Version: 140.4K Code, 58.1K Data, 198.5K Total
Debug Version: 200.7K Code, 82.1K Data, 282.8K Total
Previous Release:
Non-Debug Version: 140.0K Code, 58.1K Data, 198.1K Total
Debug Version: 200.3K Code, 82.1K Data, 282.4K Total


2) iASL Compiler/Disassembler and Tools:

Disassembler: Fixed a problem with the conversion of Else{If{ blocks into
the simpler ASL ElseIf keyword. During the conversion, a trailing If
block could be lost and missing from the disassembled output.

iASL: Fixed a missing parser rule for the ObjectType operator. For ASL+,
the missing rule caused a parse error when using the Index operator as an
operand to ObjectType. This construct now compiles properly. Example:
ObjectType(PKG1[4]).

iASL: Correctly handle unresolved symbols in the hardware map file (-lm
option). Previously, unresolved symbols could cause a protection fault.
Such symbols are now marked as unresolved in the map file.

iASL: Implemented support to allow control method invocations as an
operand to the ASL DeRefOf operator. Example:
DeRefOf(MTH1(Local0))

Disassembler: Improved support for the ToPLD ASL macro. Detection of a
possible _PLD buffer now includes examination of both the normal buffer
length (16 or 20) as well as the surrounding AML package length.

Disassembler: Fixed a problem with the decoding of complex expressions
within the Divide operator for ASL+. For the case where both the quotient
and remainder targets are specified, the entire statement cannot be
disassembled. Previously, the output incorrectly contained a mix of ASL-
and ASL+ operators. This mixed statement causes a syntax error when
compiled. Example:
Divide (Add (INT1, 6), 128, RSLT, QUOT) // was incorrectly
disassembled to:
Divide (INT1 + 6, 128, RSLT, QUOT)

iASL/Tools: Added support to process AML and non-AML ACPI tables
consistently. For the disassembler and AcpiExec, allow all types of ACPI
tables (AML and data tables). For the iASL -e option, allow only AML
tables (DSDT/SSDT).

----------------------------------------
31 August 2016. Summary of changes for version 20160831:


1) ACPICA kernel-resident subsystem:

Improve support for the so-called "module-level code", which is defined
to be math, logical and control AML opcodes that appear outside of any
control method. This change improves the support by adding more opcodes
that can be executed in the manner. Some other issues have been solved,
and the ASL grammar changes to support such code under all scope
operators (Device, etc.) are complete. Lv Zheng.

UEFI support: these OSL functions have been implemented. This is an
additional step toward supporting the AcpiExec utility natively (with
full hardware access) under UEFI. Marcelo Ferreira.
AcpiOsReadPciConfiguration
AcpiOsWritePciConfiguration

Fixed a possible mutex error during control method auto-serialization. Lv
Zheng.

Updated support for the Generic Address Structure by fully implementing
all GAS fields when a 32-bit address is expanded to a 64-bit GAS. Lv
Zheng.

Updated the return value for the internal _OSI method. Instead of
0xFFFFFFFF, the "Ones" value is now returned, which is 0xFFFFFFFFFFFFFFFF
for 64-bit ACPI tables. This fixes an incompatibility with other ACPI
implementations, and will be reflected and clarified in the next version
of the ACPI specification.

Implemented two new table events that can be passed to an ACPICA table
handler. These events are used to indicate a table installation or
uninstallation. These events are used in addition to existed table load
and unload events. Lv Zheng.

Implemented a cleanup for all internal string-to-integer conversions.
Consolidate multiple versions of this functionality and limit possible
bases to either 10 or 16 to simplify the code. Adds a new file,
utstrtoul64.

Cleanup the inclusion order of the various compiler-specific headers.
This simplifies build configuration management. The compiler-specific
headers are now split out from the host-specific headers. Lv Zheng.

Example Code and Data Size: These are the sizes for the OS-independent
acpica.lib produced by the Microsoft Visual C++ 9.0 32-bit compiler. The
debug version of the code includes the debug output trace mechanism and
has a much larger code and data size.

Current Release:
Non-Debug Version: 140.1K Code, 58.1K Data, 198.1K Total
Debug Version: 200.3K Code, 82.1K Data, 282.4K Total


2) iASL Compiler/Disassembler and Tools:

iASL/AcpiExec: Added a command line option to display the build date/time
of the tool (-vd). This can be useful to verify that the correct version
of the tools are being used.

AML Debugger: Implemented a new subcommand ("execute predef") to execute
all predefined control methods and names within the current namespace.
This can be useful for debugging problems with ACPI tables and the ACPI
namespace.

----------------------------------------
29 July 2016. Summary of changes for version 20160729:


1) ACPICA kernel-resident subsystem:

Implemented basic UEFI support for the various ACPICA tools. This
includes:
1) An OSL to implement the various AcpiOs* interfaces on UEFI.
2) Support to obtain the ACPI tables on UEFI.
3) Local implementation of required C library functions not available on
UEFI.
4) A front-end (main) function for the tools for UEFI-related
initialization.

The initial deployment of this support is the AcpiDump utility executing
as an UEFI application via EDK2 (EDKII, "UEFI Firmware Development Kit").
Current environments supported are Linux/Unix. MSVC generation is not
supported at this time. See the generate/efi/README file for build
instructions. Lv Zheng.

Future plans include porting the AcpiExec utility to execute natively on
the platform with I/O and memory access. This will allow viewing/dump of
the platform namespace and native execution of ACPI control methods that
access the actual hardware. To fully implement this support, the OSL
functions below must be implemented with UEFI interfaces. Any community
help in the implementation of these functions would be appreciated:
AcpiOsReadPort
AcpiOsWritePort
AcpiOsReadMemory
AcpiOsWriteMemory
AcpiOsReadPciConfiguration
AcpiOsWritePciConfiguration

Restructured and standardized the C library configuration for ACPICA,
resulting in the various configuration options below. This includes a
global restructuring of the compiler-dependent and platform-dependent
include files. These changes may affect the existing platform-dependent
configuration files on some hosts. Lv Zheng.

The current C library configuration options appear below. For any issues,
it may be helpful to examine the existing compiler-dependent and
platform-dependent files as examples. Lv Zheng.

1) Linux kernel:
ACPI_USE_STANDARD_HEADERS=n in order not to use system-provided C
library.
ACPI_USE_SYSTEM_CLIBRARY=y in order not to use ACPICA mini C library.
2) Unix/Windows/BSD applications:
ACPI_USE_STANDARD_HEADERS=y in order to use system-provided C
library.
ACPI_USE_SYSTEM_CLIBRARY=y in order not to use ACPICA mini C library.
3) UEFI applications:
ACPI_USE_STANDARD_HEADERS=n in order not to use system-provided C
library.
ACPI_USE_SYSTEM_CLIBRARY=n in order to use ACPICA mini C library.
4) UEFI applications (EDK2/StdLib):
ACPI_USE_STANDARD_HEADERS=y in order to use EDK2 StdLib C library.
ACPI_USE_SYSTEM_CLIBRARY=y in order to use EDK2 StdLib C library.


AML interpreter: "module-level code" support. Allows for execution of so-
called "executable" AML code (math/logical operations, etc.) outside of
control methods not just at the module level (top level) but also within
any scope declared outside of a control method - Scope{}, Device{},
Processor{}, PowerResource{}, and ThermalZone{}. Lv Zheng.

Simplified the configuration of the "maximum AML loops" global option by
adding a global public variable, "AcpiGbl_MaxLoopIterations" which can be
modified at runtime.


Example Code and Data Size: These are the sizes for the OS-independent
acpica.lib produced by the Microsoft Visual C++ 9.0 32-bit compiler. The
debug version of the code includes the debug output trace mechanism and
has a much larger code and data size.

Current Release:
Non-Debug Version: 139.1K Code, 22.9K Data, 162.0K Total
Debug Version: 199.0K Code, 81.8K Data, 280.8K Total


2) iASL Compiler/Disassembler and Tools:

iASL: Add full support for the RASF ACPI table (RAS Features Table).
Includes disassembler, data table compiler, and header support.

iASL Expand "module-level code" support. Allows for
compilation/disassembly of so-called "executable" AML code (math/logical
operations, etc.) outside of control methods not just at the module level
(top level) but also within any scope declared outside of a control
method - Scope{}, Device{}, Processor{}, PowerResource{}, and
ThermalZone{}.

AcpiDump: Added support for dumping all SSDTs on newer versions of
Windows. These tables are now easily available -- SSDTs are not available
through the registry on older versions.

show more ...

import new acpica:

----------------------------------------
8 January 2016. Summary of changes for version 20160108:

1) ACPICA kernel-resident subsystem:

Updated all ACPICA copyrights and signons

import new acpica:

----------------------------------------
8 January 2016. Summary of changes for version 20160108:

1) ACPICA kernel-resident subsystem:

Updated all ACPICA copyrights and signons to 2016: Added the 2016
copyright to all source code module headers and utility/tool signons.
This includes the standard Linux dual-license header. This affects
virtually every file in the ACPICA core subsystem, iASL compiler, all
ACPICA utilities, and the ACPICA test suite.

Fixed a regression introduced in version 20151218 concerning the
execution of so-called module-level ASL/AML code. Namespace objects
created under a module-level If() construct were not properly/fully
entered into the namespace and could cause an interpreter fault when
accessed.

Example Code and Data Size: These are the sizes for the OS-independent
acpica.lib produced by the Microsoft Visual C++ 9.0 32-bit compiler. The
debug version of the code includes the debug output trace mechanism and
has a much larger code and data size.

Current Release:
Non-Debug Version: 102.7K Code, 28.4K Data, 131.1K Total
Debug Version: 200.4K Code, 81.9K Data, 282.4K Total
Previous Release:
Non-Debug Version: 102.6K Code, 28.4K Data, 131.0K Total
Debug Version: 200.3K Code, 81.9K Data, 282.3K Total


2) iASL Compiler/Disassembler and Tools:

Fixed a problem with the compilation of the GpioIo and GpioInt resource
descriptors. The _PIN field name was incorrectly defined to be an array
of 32-bit values, but the _PIN values are in fact 16 bits each. This
would cause incorrect bit width warnings when using Word (16-bit) fields
to access the descriptors.


----------------------------------------
18 December 2015. Summary of changes for version 20151218:

1) ACPICA kernel-resident subsystem:

Implemented per-AML-table execution of "module-level code" as individual
ACPI tables are loaded into the namespace during ACPICA initialization.
In other words, any module-level code within an AML table is executed
immediately after the table is loaded, instead of batched and executed
after all of the tables have been loaded. This provides compatibility
with other ACPI implementations. ACPICA BZ 1219. Bob Moore, Lv Zheng,
David Box.

To fully support the feature above, the default operation region handlers
for the SystemMemory, SystemIO, and PCI_Config address spaces are now
installed before any ACPI tables are loaded. This enables module-level
code to access these address spaces during the table load and module-
level code execution phase. ACPICA BZ 1220. Bob Moore, Lv Zheng, David
Box.

Implemented several changes to the internal _REG support in conjunction
with the changes above. Also, changes to the AcpiExec/AcpiNames/Examples
utilities for the changes above. Although these tools were changed, host
operating systems that simply use the default handlers for SystemMemory,
SystemIO, and PCI_Config spaces should not require any update. Lv Zheng.

For example, in the code below, DEV1 is conditionally added to the
namespace by the DSDT via module-level code that accesses an operation
region. The SSDT references DEV1 via the Scope operator. DEV1 must be
created immediately after the DSDT is loaded in order for the SSDT to
successfully reference DEV1. Previously, this code would cause an
AE_NOT_EXIST exception during the load of the SSDT. Now, this code is
fully supported by ACPICA.

DefinitionBlock ("", "DSDT", 2, "Intel", "DSDT1", 1)
{
OperationRegion (OPR1, SystemMemory, 0x400, 32)
Field (OPR1, AnyAcc, NoLock, Preserve)
{
FLD1, 1
}
If (FLD1)
{
Device (\DEV1)
{
}
}
}
DefinitionBlock ("", "SSDT", 2, "Intel", "SSDT1", 1)
{
External (\DEV1, DeviceObj)
Scope (\DEV1)
{
}
}

Fixed an AML interpreter problem where control method invocations were
not handled correctly when the invocation was itself a SuperName argument
to another ASL operator. In these cases, the method was not invoked.
ACPICA BZ 1002. Affects the following ASL operators that have a SuperName
argument:
Store
Acquire, Wait
CondRefOf, RefOf
Decrement, Increment
Load, Unload
Notify
Signal, Release, Reset
SizeOf

Implemented automatic String-to-ObjectReference conversion support for
packages returned by predefined names (such as _DEP). A common BIOS error
is to add double quotes around an ObjectReference namepath, which turns
the reference into an unexpected string object. This support detects the
problem and corrects it before the package is returned to the caller that
invoked the method. Lv Zheng.

Implemented extensions to the Concatenate operator. Concatenate now
accepts any type of object, it is not restricted to simply
Integer/String/Buffer. For objects other than these 3 basic data types,
the argument is treated as a string containing the name of the object
type. This expands the utility of Concatenate and the Printf/Fprintf
macros. ACPICA BZ 1222.

Cleaned up the output of the ASL Debug object. The timer() value is now
optional and no longer emitted by default. Also, the basic data types of
Integer/String/Buffer are simply emitted as their values, without a data
type string -- since the data type is obvious from the output. ACPICA BZ
1221.

Example Code and Data Size: These are the sizes for the OS-independent
acpica.lib produced by the Microsoft Visual C++ 9.0 32-bit compiler. The
debug version of the code includes the debug output trace mechanism and
has a much larger code and data size.

Current Release:
Non-Debug Version: 102.6K Code, 28.4K Data, 131.0K Total
Debug Version: 200.3K Code, 81.9K Data, 282.3K Total
Previous Release:
Non-Debug Version: 102.0K Code, 28.3K Data, 130.3K Total
Debug Version: 199.6K Code, 81.8K Data, 281.4K Total


2) iASL Compiler/Disassembler and Tools:

iASL: Fixed some issues with the ASL Include() operator. This operator
was incorrectly defined in the iASL parser rules, causing a new scope to
be opened for the code within the include file. This could lead to
several issues, including allowing ASL code that is technically illegal
and not supported by AML interpreters. Note, this does not affect the
related #include preprocessor operator. ACPICA BZ 1212.

iASL/Disassembler: Implemented support for the ASL ElseIf operator. This
operator is essentially an ASL macro since there is no AML opcode
associated with it. The code emitted by the iASL compiler for ElseIf is
an Else opcode followed immediately by an If opcode. The disassembler
will now emit an ElseIf if it finds an Else immediately followed by an
If. This simplifies the decoded ASL, especially for deeply nested
If..Else and large Switch constructs. Thus, the disassembled code more
closely follows the original source ASL. ACPICA BZ 1211. Example:

Old disassembly:
Else
{
If (Arg0 == 0x02)
{
Local0 = 0x05
}
}

New disassembly:
ElseIf (Arg0 == 0x02)
{
Local0 = 0x05
}

AcpiExec: Added support for the new module level code behavior and the
early region installation. This required a small change to the
initialization, since AcpiExec must install its own operation region
handlers.

AcpiExec: Added support to make the debug object timer optional. Default
is timer disabled. This cleans up the debug object output -- the timer
data is rarely used.

AcpiExec: Multiple ACPI tables are now loaded in the order that they
appear on the command line. This can be important when there are
interdependencies/references between the tables.

iASL/Templates. Add support to generate template files with multiple
SSDTs within a single output file. Also added ommand line support to
specify the number of SSDTs (in addition to a single DSDT). ACPICA BZ
1223, 1225.


----------------------------------------
24 November 2015. Summary of changes for version 20151124:

1) ACPICA kernel-resident subsystem:

Fixed a possible regression for a previous update to FADT handling. The
FADT no longer has a fixed table ID, causing some issues with code that
was hardwired to a specific ID. Lv Zheng.

Fixed a problem where the method auto-serialization could interfere with
the current SyncLevel. This change makes the auto-serialization support
transparent to the SyncLevel support and management.

Removed support for the _SUB predefined name in AcpiGetObjectInfo. This
interface is intended for early access to the namespace during the
initial namespace device discovery walk. The _SUB method has been seen to
access operation regions in some cases, causing errors because the
operation regions are not fully initialized.

AML Debugger: Fixed some issues with the terminate/quit/exit commands
that can cause faults. Lv Zheng.

AML Debugger: Add thread ID support so that single-step mode only applies
to the AML Debugger thread. This prevents runtime errors within some
kernels. Lv Zheng.

Eliminated extraneous warnings from AcpiGetSleepTypeData. Since the _Sx
methods that are invoked by this interface are optional, removed warnings
emitted for the case where one or more of these methods do not exist.
ACPICA BZ 1208, original change by Prarit Bhargava.

Made a major pass through the entire ACPICA source code base to
standardize formatting that has diverged a bit over time. There are no
functional changes, but this will of course cause quite a few code
differences from the previous ACPICA release.

Example Code and Data Size: These are the sizes for the OS-independent
acpica.lib produced by the Microsoft Visual C++ 9.0 32-bit compiler. The
debug version of the code includes the debug output trace mechanism and
has a much larger code and data size.

Current Release:
Non-Debug Version: 102.0K Code, 28.3K Data, 130.3K Total
Debug Version: 199.6K Code, 81.8K Data, 281.4K Total
Previous Release:
Non-Debug Version: 101.7K Code, 27.9K Data, 129.6K Total
Debug Version: 199.3K Code, 81.4K Data, 280.7K Total


2) iASL Compiler/Disassembler and Tools:

iASL/acpiexec/acpixtract/disassembler: Added support to allow multiple
definition blocks within a single ASL file and the resulting AML file.
Support for this type of file was also added to the various tools that
use binary AML files: acpiexec, acpixtract, and the AML disassembler. The
example code below shows two definition blocks within the same file:

DefinitionBlock ("dsdt.aml", "DSDT", 2, "Intel", "Template",
0x12345678)
{
}
DefinitionBlock ("", "SSDT", 2, "Intel", "Template", 0xABCDEF01)
{
}

iASL: Enhanced typechecking for the Name() operator. All expressions for
the value of the named object must be reduced/folded to a single constant
at compile time, as per the ACPI specification (the AML definition of
Name()).

iASL: Fixed some code indentation issues for the -ic and -ia options (C
and assembly headers). Now all emitted code correctly begins in column 1.

iASL: Added an error message for an attempt to open a Scope() on an
object defined in an SSDT. The DSDT is always loaded into the namespace
first, so any attempt to open a Scope on an SSDT object will fail at
runtime.


----------------------------------------
30 September 2015. Summary of changes for version 20150930:

1) ACPICA kernel-resident subsystem:

Debugger: Implemented several changes and bug fixes to assist support for
the in-kernel version of the AML debugger. Lv Zheng.
- Fix the "predefined" command for in-kernel debugger.
- Do not enter debug command loop for the help and version commands.
- Disallow "execute" command during execution/single-step of a method.

Interpreter: Updated runtime typechecking for all operators that have
target operands. The operand is resolved and validated that it is legal.
For example, the target cannot be a non-data object such as a Device,
Mutex, ThermalZone, etc., as per the ACPI specification.

Debugger: Fixed the double-mutex user I/O handshake to work when local
deadlock detection is enabled.

Debugger: limited display of method locals and arguments (LocalX and
ArgX) to only those that have actually been initialized. This prevents
lines of extraneous output.

Updated the definition of the NFIT table to correct the bit polarity of
one flag: ACPI_NFIT_MEM_ARMED --> ACPI_NFIT_MEM_NOT_ARMED

Example Code and Data Size: These are the sizes for the OS-independent
acpica.lib produced by the Microsoft Visual C++ 9.0 32-bit compiler. The
debug version of the code includes the debug output trace mechanism and
has a much larger code and data size.

Current Release:
Non-Debug Version: 101.7K Code, 27.9K Data, 129.6K Total
Debug Version: 199.3K Code, 81.4K Data, 280.7K Total
Previous Release:
Non-Debug Version: 101.3K Code, 27.7K Data, 129.0K Total
Debug Version: 198.6K Code, 80.9K Data, 279.5K Total


2) iASL Compiler/Disassembler and Tools:

iASL: Improved the compile-time typechecking for operands of many of the
ASL operators:

-- Added an option to disable compiler operand/operator typechecking (-
ot).

-- For the following operators, the TermArg operands are now validated
when possible to be Integer data objects: BankField, OperationRegion,
DataTableRegion, Buffer, and Package.

-- Store (Source, Target): Both the source and target operands are
resolved and checked that the operands are both legal. For example,
neither operand can be a non-data object such as a Device, Mutex,
ThermalZone, etc. Note, as per the ACPI specification, the CopyObject
operator can be used to store an object to any type of target object.

-- Store (Source, Target): If the source is a Package object, the target
must be a Package object, LocalX, ArgX, or Debug. Likewise, if the target
is a Package, the source must also be a Package.

-- Store (Source, Target): A warning is issued if the source and target
resolve to the identical named object.

-- Store (Source, <method invocation>): An error is generated for the
target method invocation, as this construct is not supported by the AML
interpreter.

-- For all ASL math and logic operators, the target operand must be a
data object (Integer, String, Buffer, LocalX, ArgX, or Debug). This
includes the function return value also.

-- External declarations are also included in the typechecking where
possible. External objects defined using the UnknownObj keyword cannot be
typechecked, however.

iASL and Disassembler: Added symbolic (ASL+) support for the ASL Index
operator:
- Legacy code: Index(PKG1, 3)
- New ASL+ code: PKG1[3]
This completes the ACPI 6.0 ASL+ support as it was the only operator not
supported.

iASL: Fixed the file suffix for the preprocessor output file (.i). Two
spaces were inadvertently appended to the filename, causing file access
and deletion problems on some systems.

ASL Test Suite (ASLTS): Updated the master makefile to generate all
possible compiler output files when building the test suite -- thus
exercising these features of the compiler. These files are automatically
deleted when the test suite exits.


----------------------------------------
18 August 2015. Summary of changes for version 20150818:

1) ACPICA kernel-resident subsystem:

Fix a regression for AcpiGetTableByIndex interface causing it to fail. Lv
Zheng. ACPICA BZ 1186.

Completed development to ensure that the ACPICA Disassembler and Debugger
are fully standalone components of ACPICA. Removed cross-component
dependences. Lv Zheng.

The max-number-of-AML-loops is now runtime configurable (previously was
compile-time only). This is essentially a loop timeout to force-abort
infinite AML loops. ACPCIA BZ 1192.

Debugger: Cleanup output to dump ACPI names and namepaths without any
trailing underscores. Lv Zheng. ACPICA BZ 1135.

Removed unnecessary conditional compilations across the Debugger and
Disassembler components where entire modules could be left uncompiled.

The aapits test is deprecated and has been removed from the ACPICA git
tree. The test has never been completed and has not been maintained, thus
becoming rather useless. ACPICA BZ 1015, 794.

A batch of small changes to close bugzilla and other reports:
- Remove duplicate code for _PLD processing. ACPICA BZ 1176.
- Correctly cleanup after a ACPI table load failure. ACPICA BZ 1185.
- iASL: Support POSIX yacc again in makefile. Jung-uk Kim.
- ACPI table support: general cleanup and simplification. Lv Zheng, Bob
Moore.
- ACPI table support: fix for a buffer read overrun in AcpiTbFindTable.
ACPICA BZ 1184.
- Enhance parameter validation for DataTableRegion and LoadTable ASL/AML
operators.
- Debugger: Split debugger initialization/termination interfaces. Lv
Zheng.
- AcpiExec: Emit OemTableId for SSDTs during the load phase for table
identification.
- AcpiExec: Add debug message during _REG method phase during table
load/init.
- AcpiNames: Fix a regression where some output was missing and no longer
emitted.
- Debugger: General cleanup and simplification. Lv Zheng.
- Disassembler: Cleanup use of several global option variables. Lv Zheng.

Example Code and Data Size: These are the sizes for the OS-independent
acpica.lib produced by the Microsoft Visual C++ 9.0 32-bit compiler. The
debug version of the code includes the debug output trace mechanism and
has a much larger code and data size.

Current Release:
Non-Debug Version: 101.3K Code, 27.7K Data, 129.0K Total
Debug Version: 198.6K Code, 80.9K Data, 279.5K Total
Previous Release:
Non-Debug Version: 100.9K Code, 24.5K Data, 125.4K Total
Debug Version: 197.8K Code, 81.5K Data, 279.3K Total


2) iASL Compiler/Disassembler and Tools:

AcpiExec: Fixed a problem where any more than 32 ACPI tables in the XSDT
were not handled properly and caused load errors. Now, properly invoke
and use the ACPICA auto-reallocate mechanism for ACPI table data
structures. ACPICA BZ 1188

AcpiNames: Add command-line wildcard support for ACPI table files. ACPICA
BZ 1190.

AcpiExec and AcpiNames: Add -l option to load ACPI tables only. For
AcpiExec, this means that no control methods (like _REG/_INI/_STA) are
executed during initialization. ACPICA BZ 1187, 1189.

iASL/Disassembler: Implemented a prototype "listing" mode that emits AML
that corresponds to each disassembled ASL statement, to simplify
debugging. ACPICA BZ 1191.

Debugger: Add option to the "objects" command to display a summary of the
current namespace objects (Object type and count). This is displayed if
the command is entered with no arguments.

AcpiNames: Add -x option to specify debug level, similar to AcpiExec.


----------------------------------------

show more ...

----------------------------------------
17 July 2015. Summary of changes for version 20150717:

1) ACPICA kernel-resident subsystem:

Improved the partitioning between the Debugger and Disassembler

----------------------------------------
17 July 2015. Summary of changes for version 20150717:

1) ACPICA kernel-resident subsystem:

Improved the partitioning between the Debugger and Disassembler
components. This allows the Debugger to be used standalone within kernel
code without the Disassembler (which is used for single stepping also).
This renames and moves one file, dmobject.c to dbobject.c. Lv Zheng.

Debugger: Implemented a new command to trace the execution of control
methods (Trace). This is especially useful for the in-kernel version of
the debugger when file I/O may not be available for method trace output.
See the ACPICA reference for more information. Lv Zheng.

Moved all C library prototypes (used for the local versions of these
functions when requested) to a new header, acclib.h
Cleaned up the use of non-ANSI C library functions. These functions are
implemented locally in ACPICA. Moved all such functions to a common
source file, utnonansi.c

Debugger: Fixed a problem with the "!!" command (get last command
executed) where the debugger could enter an infinite loop and eventually
crash.

Removed the use of local macros that were used for some of the standard C
library functions to automatically cast input parameters. This mostly
affected the is* functions where the input parameter is defined to be an
int. This required a few modifications to the main ACPICA source code to
provide casting for these functions and eliminate possible compiler
warnings for these parameters.

Across the source code, added additional status/error checking to resolve
issues discovered by static source code analysis tools such as Coverity.

Example Code and Data Size: These are the sizes for the OS-independent
acpica.lib produced by the Microsoft Visual C++ 9.0 32-bit compiler. The
debug version of the code includes the debug output trace mechanism and
has a much larger code and data size.

Current Release:
Non-Debug Version: 100.9K Code, 24.5K Data, 125.4K Total
Debug Version: 197.8K Code, 81.5K Data, 279.3K Total
Previous Release:
Non-Debug Version: 100.6K Code, 27.6K Data, 128.2K Total
Debug Version: 196.2K Code, 81.0K Data, 277.2K Total


2) iASL Compiler/Disassembler and Tools:

iASL: Fixed a regression where the device map file feature no longer
worked properly when used in conjunction with the disassembler. It only
worked properly with the compiler itself.

iASL: Implemented a new warning for method LocalX variables that are set
but never used (similar to a C compiler such as gcc). This also applies
to ArgX variables that are not defined by the parent method, and are
instead (legally) used as local variables.

iASL/Preprocessor: Finished the pass-through of line numbers from the
preprocessor to the compiler. This ensures that compiler errors/warnings
have the correct original line numbers and filenames, regardless of any
#include files.

iASL/Preprocessor: Fixed a couple of issues with comment handling and the
pass-through of comments to the preprocessor output file (which becomes
the compiler input file). Also fixed a problem with // comments that
appear after a math expression.

iASL: Added support for the TCPA server table to the table compiler and
template generator. (The client table was already previously supported)

iASL/Preprocessor: Added a permanent #define of the symbol "__IASL__" to
identify the iASL compiler.

Cleaned up the use of the macros NEGATIVE and POSITIVE which were defined
multiple times. The new names are ACPI_SIGN_NEGATIVE and
ACPI_SIGN_POSITIVE.

AcpiHelp: Update to expand help messages for the iASL preprocessor
directives.


----------------------------------------
19 June 2015. Summary of changes for version 20150619:

Two regressions in version 20150616 have been addressed:

Fixes some problems/issues with the C library macro removal (ACPI_STRLEN,
etc.) This update changes ACPICA to only use the standard headers for
functions, or the prototypes for the local versions of the C library
functions. Across the source code, this required some additional casts
for some Clib invocations for portability. Moved all local prototypes to
a new file, acclib.h

Fixes several problems with recent changes to the handling of the FACS
table that could cause some systems not to boot.


----------------------------------------
16 June 2015. Summary of changes for version 20150616:


1) ACPICA kernel-resident subsystem:

Across the entire ACPICA source code base, the various macros for the C
library functions (such as ACPI_STRLEN, etc.) have been removed and
replaced by the standard C library names (strlen, etc.) The original
purpose for these macros is no longer applicable. This simplification
reduces the number of macros used in the ACPICA source code
significantly, improving readability and maintainability.

Implemented support for a new ACPI table, the OSDT. This table, the
"override" SDT, can be loaded directly by the host OS at boot time. It
enables the replacement of existing namespace objects that were installed
via the DSDT and/or SSDTs. The primary purpose for this is to replace
buggy or incorrect ASL/AML code obtained via the BIOS. The OSDT is slated
for inclusion in a future version of the ACPI Specification. Lv Zheng/Bob
Moore.

Added support for systems with (improperly) two FACS tables -- a "32-bit"
table (via FADT 32-bit legacy field) and a "64-bit" table (via the 64-bit
X field). This change will support both automatically. There continues to
be systems found with this issue. This support requires a change to the
AcpiSetFirmwareWakingVector interface. Also, a public global variable has
been added to allow the host to select which FACS is desired
(AcpiGbl_Use32BitFacsAddresses). See the ACPICA reference for more
details Lv Zheng.

Added a new feature to allow for systems that do not contain an FACS.
Although this is already supported on hardware-reduced platforms, the
feature has been extended for all platforms. The reasoning is that we do
not want to abort the entire ACPICA initialization just because the
system is seriously buggy and has no FACS.

Fixed a problem where the GUID strings for NFIT tables (in acuuid.h) were
not correctly transcribed from the ACPI specification in ACPICA version
20150515.

Implemented support for the _CLS object in the AcpiGetObjectInfo external
interface.

Updated the definitions of the TCPA and TPM2 ACPI tables to the more
recent TCG ACPI Specification, December 14, 2014. Table disassembler and
compiler also updated. Note: The TCPA "server" table is not supported by
the disassembler/table-compiler at this time.

ACPI 6.0: Added definitions for the new GIC version field in the MADT.

Example Code and Data Size: These are the sizes for the OS-independent
acpica.lib produced by the Microsoft Visual C++ 9.0 32-bit compiler. The
debug version of the code includes the debug output trace mechanism and
has a much larger code and data size.

Current Release:
Non-Debug Version: 100.6K Code, 27.6K Data, 128.2K Total
Debug Version: 196.2K Code, 81.0K Data, 277.2K Total
Previous Release:
Non-Debug Version: 99.9K Code, 27.5K Data, 127.4K Total
Debug Version: 195.2K Code, 80.8K Data, 276.0K Total


2) iASL Compiler/Disassembler and Tools:

Disassembler: Fixed a problem with the new symbolic operator disassembler
where incorrect ASL code could be emitted in some cases for the "non-
commutative" operators -- Subtract, Divide, Modulo, ShiftLeft, and
ShiftRight. The actual problem cases seem to be rather unusual in common
ASL code, however. David Box.

Modified the linux version of acpidump to obtain ACPI tables from not
just /dev/mem (which may not exist) and /sys/firmware/acpi/tables. Lv
Zheng.

iASL: Fixed a problem where the user preprocessor output file (.i)
contained extra data that was not expected. The compiler was using this
file as a temporary file and passed through #line directives in order to
keep compiler error messages in sync with the input file and line number
across multiple include files. The (.i) is no longer a temporary file as
the compiler uses a new, different file for the original purpose.

iASL: Fixed a problem where comments within the original ASL source code
file were not passed through to the preprocessor output file, nor any
listing files.

iASL: Fixed some issues for the handling of the "#include" preprocessor
directive and the similar (but not the same) "Include" ASL operator.

iASL: Add support for the new OSDT in both the disassembler and compiler.

iASL: Fixed a problem with the constant folding support where a Buffer
object could be incorrectly generated (incorrectly formed) during a
conversion to a Store() operator.

AcpiHelp: Updated for new NFIT GUIDs, "External" AML opcode, and new
description text for the _REV predefined name. _REV now permanently
returns 2, as per the ACPI 6.0 specification.

Debugger: Enhanced the output of the Debug ASL object for references
produced by the Index operator. For Buffers and strings, only output the
actual byte pointed to by the index. For packages, only print the single
package element decoded by the index. Previously, the entire
buffer/string/package was emitted.

iASL/Table-compiler: Fixed a regression where the "generic" data types
were no longer recognized, causing errors.


----------------------------------------
15 May 2015. Summary of changes for version 20150515:

This release implements most of ACPI 6.0 as described below.

1) ACPICA kernel-resident subsystem:

Implemented runtime argument checking and return value checking for all
new ACPI 6.0 predefined names. This includes: _BTH, _CR3, _DSD, _LPI,
_MTL, _PRR, _RDI, _RST, _TFP, _TSN.

Example Code and Data Size: These are the sizes for the OS-independent
acpica.lib produced by the Microsoft Visual C++ 9.0 32-bit compiler. The
debug version of the code includes the debug output trace mechanism and
has a much larger code and data size.

Current Release:
Non-Debug Version: 99.9K Code, 27.5K Data, 127.4K Total
Debug Version: 195.2K Code, 80.8K Data, 276.0K Total
Previous Release:
Non-Debug Version: 99.1K Code, 27.3K Data, 126.4K Total
Debug Version: 192.8K Code, 79.9K Data, 272.7K Total


2) iASL Compiler/Disassembler and Tools:

iASL compiler: Added compile-time support for all new ACPI 6.0 predefined
names (argument count validation and return value typechecking.)

iASL disassembler and table compiler: implemented support for all new
ACPI 6.0 tables. This includes: DRTM, IORT, LPIT, NFIT, STAO, WPBT, XENV.

iASL disassembler and table compiler: Added ACPI 6.0 changes to existing
tables: FADT, MADT.

iASL preprocessor: Added a new directive to enable inclusion of binary
blobs into ASL code. The new directive is #includebuffer. It takes a
binary file as input and emits a named ascii buffer object into the ASL
code.

AcpiHelp: Added support for all new ACPI 6.0 predefined names.

AcpiHelp: Added a new option, -d, to display all iASL preprocessor
directives.

AcpiHelp: Added a new option, -t, to display all known/supported ACPI
tables.

show more ...

----------------------------------------
10 April 2015. Summary of changes for version 20150410:

Reverted a change introduced in version 20150408 that caused
a regression in the disassembler where i

----------------------------------------
10 April 2015. Summary of changes for version 20150410:

Reverted a change introduced in version 20150408 that caused
a regression in the disassembler where incorrect operator
symbols could be emitted.

----------------------------------------
08 April 2015. Summary of changes for version 20150408:


1) ACPICA kernel-resident subsystem:

Permanently set the return value for the _REV predefined name. It now
returns 2 (was 5). This matches other ACPI implementations. _REV will be
deprecated in the future, and is now defined to be 1 for ACPI 1.0, and 2
for ACPI 2.0 and later. It should never be used to differentiate or
identify operating systems.

Added the "Windows 2015" string to the _OSI support. ACPICA will now
return TRUE to a query with this string.

Fixed several issues with the local version of the printf function.

Added the C99 compiler option (-std=c99) to the Unix makefiles.

Current Release:
Non-Debug Version: 99.9K Code, 27.4K Data, 127.3K Total
Debug Version: 195.2K Code, 80.7K Data, 275.9K Total
Previous Release:
Non-Debug Version: 98.8K Code, 27.3K Data, 126.1K Total
Debug Version: 192.1K Code, 79.8K Data, 271.9K Total


2) iASL Compiler/Disassembler and Tools:

iASL: Implemented an enhancement to the constant folding feature to
transform the parse tree to a simple Store operation whenever possible:
Add (2, 3, X) ==> is converted to: Store (5, X)
X = 2 + 3 ==> is converted to: Store (5, X)

Updated support for the SLIC table (Software Licensing Description Table)
in both the Data Table compiler and the disassembler. The SLIC table
support now conforms to "Microsoft Software Licensing Tables (SLIC and
MSDM). November 29, 2011. Copyright 2011 Microsoft". Note: Any SLIC data
following the ACPI header is now defined to be "Proprietary Data", and as
such, can only be entered or displayed as a hex data block.

Implemented full support for the MSDM table as described in the document
above. Note: The format of MSDM is similar to SLIC. Any MSDM data
following the ACPI header is defined to be "Proprietary Data", and can
only be entered or displayed as a hex data block.

Implemented the -Pn option for the iASL Table Compiler (was only
implemented for the ASL compiler). This option disables the iASL
preprocessor.

Disassembler: For disassembly of Data Tables, added a comment field
around the Ascii equivalent data that is emitted as part of the "Raw
Table Data" block. This prevents the iASL Preprocessor from possible
confusion if/when the table is compiled.

Disassembler: Added an option (-df) to force the disassembler to assume
that the table being disassembled contains valid AML. This feature is
useful for disassembling AML files that contain ACPI signatures other
than DSDT or SSDT (such as OEMx or other signatures).

Changes for the EFI version of the tools:
1) Fixed a build error/issue
2) Fixed a cast warning

iASL: Fixed a path issue with the __FILE__ operator by making the
directory prefix optional within the internal SplitInputFilename
function.

Debugger: Removed some unused global variables.

Tests: Updated the makefile for proper generation of the AAPITS suite.

----------------------------------------
04 February 2015. Summary of changes for version 20150204:

ACPICA kernel-resident subsystem:

Updated all ACPICA copyrights and signons to 2014. Added the 2014
copyright to all module headers and signons, including the standard Linux
header. This affects virtually every file in the ACPICA core subsystem,
iASL compiler, all ACPICA utilities, and the test suites.

Events: Introduce ACPI_GPE_DISPATCH_RAW_HANDLER to fix GPE storm issues.
A raw gpe handling mechanism was created to allow better handling of GPE
storms that aren't easily managed by the normal handler. The raw handler
allows disabling/renabling of the the GPE so that interrupt storms can be
avoided in cases where events cannot be timely serviced. In this
scenario, handlers should use the AcpiSetGpe() API to disable/enable the
GPE. This API will leave the reference counts undisturbed, thereby
preventing unintentional clearing of the GPE when the intent in only to
temporarily disable it. Raw handlers allow enabling and disabling of a
GPE by removing GPE register locking. As such, raw handlers much provide
their own locks while using GPE API's to protect access to GPE data
structures.
Lv Zheng

Events: Always modify GPE registers under the GPE lock.
Applies GPE lock around AcpiFinishGpe() to protect access to GPE register
values. Reported as bug by joe.liu@apple.com.

Unix makefiles: Separate option to disable optimizations and
_FORTIFY_SOURCE. This change removes the _FORTIFY_SOURCE flag from the
NOOPT disable option and creates a separate flag (NOFORTIFY) for this
purpose. Some toolchains may define _FORTIFY_SOURCE which leads redefined
errors when building ACPICA. This allows disabling the option without
also having to disable optimazations.
David Box

Current Release:
Non-Debug Version: 101.7K Code, 27.9K Data, 129.6K Total
Debug Version: 199.2K Code, 82.4K Data, 281.6K Total

----------------------------------------
07 November 2014. Summary of changes for version 20141107:

This release is available at https://acpica.org/downloads

This release introduces and implements language extensions to ASL that
provide support for symbolic ("C-style") operators and expressions. These
language extensions are known collectively as ASL+.


1) iASL Compiler/Disassembler and Tools:

Disassembler: Fixed a problem with disassembly of the UartSerialBus
macro. Changed "StopBitsNone" to the correct "StopBitsZero". David E.
Box.

Disassembler: Fixed the Unicode macro support to add escape sequences.
All non-printable ASCII values are emitted as escape sequences, as well
as the standard escapes for quote and backslash. Ensures that the
disassembled macro can be correctly recompiled.

iASL: Added Printf/Fprintf macros for formatted output. These macros are
translated to existing AML Concatenate and Store operations. Printf
writes to the ASL Debug object. Fprintf allows the specification of an
ASL name as the target. Only a single format specifier is required, %o,
since the AML interpreter dynamically converts objects to the required
type. David E. Box.

(old) Store (Concatenate (Concatenate (Concatenate (Concatenate
(Concatenate (Concatenate (Concatenate ("", Arg0),
": Unexpected value for "), Arg1), ", "), Arg2),
" at line "), Arg3), Debug)

(new) Printf ("%o: Unexpected value for %o, %o at line %o",
Arg0, Arg1, Arg2, Arg3)

(old) Store (Concatenate (Concatenate (Concatenate (Concatenate
("", Arg1), ": "), Arg0), " Successful"), STR1)

(new) Fprintf (STR1, "%o: %o Successful", Arg1, Arg0)

iASL: Added debug options (-bp, -bt) to dynamically prune levels of the
ASL parse tree before the AML code is generated. This allows blocks of
ASL code to be removed in order to help locate and identify problem
devices and/or code. David E. Box.

AcpiExec: Added support (-fi) for an optional namespace object
initialization file. This file specifies initial values for namespace
objects as necessary for debugging and testing different ASL code paths
that may be taken as a result of BIOS options.


2) Overview of symbolic operator support for ASL (ASL+)
-------------------------------------------------------

As an extension to the ASL language, iASL implements support for symbolic
(C-style) operators for math and logical expressions. This can greatly
simplify ASL code as well as improve both readability and
maintainability. These language extensions can exist concurrently with
all legacy ASL code and expressions.

The symbolic extensions are 100% compatible with existing AML
interpreters, since no new AML opcodes are created. To implement the
extensions, the iASL compiler transforms the symbolic expressions into
the legacy ASL/AML equivalents at compile time.

Full symbolic expressions are supported, along with the standard C
precedence and associativity rules.

Full disassembler support for the symbolic expressions is provided, and
creates an automatic migration path for existing ASL code to ASL+ code
via the disassembly process. By default, the disassembler now emits ASL+
code with symbolic expressions. An option (-dl) is provided to force the
disassembler to emit legacy ASL code if desired.

Below is the complete list of the currently supported symbolic operators
with examples. See the iASL User Guide for additional information.


ASL+ Syntax Legacy ASL Equivalent
----------- ---------------------

// Math operators

Z = X + Y Add (X, Y, Z)
Z = X - Y Subtract (X, Y, Z)
Z = X * Y Multiply (X, Y, Z)
Z = X / Y Divide (X, Y, , Z)
Z = X % Y Mod (X, Y, Z)
Z = X << Y ShiftLeft (X, Y, Z)
Z = X >> Y ShiftRight (X, Y, Z)
Z = X & Y And (X, Y, Z)
Z = X | Y Or (X, Y, Z)
Z = X ^ Y Xor (X, Y, Z)
Z = ~X Not (X, Z)
X++ Increment (X)
X-- Decrement (X)

// Logical operators

(X == Y) LEqual (X, Y)
(X != Y) LNotEqual (X, Y)
(X < Y) LLess (X, Y)
(X > Y) LGreater (X, Y)
(X <= Y) LLessEqual (X, Y)
(X >= Y) LGreaterEqual (X, Y)
(X && Y) LAnd (X, Y)
(X || Y) LOr (X, Y)
(!X) LNot (X)

// Assignment and compound assignment operations

X = Y Store (Y, X)
X += Y Add (X, Y, X)
X -= Y Subtract (X, Y, X)
X *= Y Multiply (X, Y, X)
X /= Y Divide (X, Y, , X)
X %= Y Mod (X, Y, X)
X <<= Y ShiftLeft (X, Y, X)
X >>= Y ShiftRight (X, Y, X)
X &= Y And (X, Y, X)
X |= Y Or (X, Y, X)
X ^= Y Xor (X, Y, X)


3) ASL+ Examples:
-----------------

Legacy ASL:
If (LOr (LOr (LEqual (And (R510, 0x03FB), 0x02E0), LEqual (
And (R520, 0x03FB), 0x02E0)), LOr (LEqual (And (R530,
0x03FB),
0x02E0), LEqual (And (R540, 0x03FB), 0x02E0))))
{
And (MEMB, 0xFFFFFFF0, SRMB)
Store (MEMB, Local2)
Store (PDBM, Local1)
And (PDBM, 0xFFFFFFFFFFFFFFF9, PDBM)
Store (SRMB, MEMB)
Or (PDBM, 0x02, PDBM)
}

ASL+ version:
If (((R510 & 0x03FB) == 0x02E0) ||
((R520 & 0x03FB) == 0x02E0) ||
((R530 & 0x03FB) == 0x02E0) ||
((R540 & 0x03FB) == 0x02E0))
{
SRMB = (MEMB & 0xFFFFFFF0)
Local2 = MEMB
Local1 = PDBM
PDBM &= 0xFFFFFFFFFFFFFFF9
MEMB = SRMB
PDBM |= 0x02
}

Legacy ASL:
Store (0x1234, Local1)
Multiply (Add (Add (Local1, TEST), 0x20), Local2, Local3)
Multiply (Local2, Add (Add (Local1, TEST), 0x20), Local3)
Add (Local1, Add (TEST, Multiply (0x20, Local2)), Local3)
Store (Index (PKG1, 0x03), Local6)
Store (Add (Local3, Local2), Debug)
Add (Local1, 0x0F, Local2)
Add (Local1, Multiply (Local2, Local3), Local2)
Multiply (Add (Add (Local1, TEST), 0x20), ToBCD (Local1), Local3)

ASL+ version:
Local1 = 0x1234
Local3 = (((Local1 + TEST) + 0x20) * Local2)
Local3 = (Local2 * ((Local1 + TEST) + 0x20))
Local3 = (Local1 + (TEST + (0x20 * Local2)))
Local6 = Index (PKG1, 0x03)
Debug = (Local3 + Local2)
Local2 = (Local1 + 0x0F)
Local2 = (Local1 + (Local2 * Local3))
Local3 = (((Local1 + TEST) + 0x20) * ToBCD (Local1))

show more ...

----------------------------------------
26 September 2014. Summary of changes for version 20140926:

1) ACPICA kernel-resident subsystem:

Updated the GPIO operation region handler interface (Genera

----------------------------------------
26 September 2014. Summary of changes for version 20140926:

1) ACPICA kernel-resident subsystem:

Updated the GPIO operation region handler interface (GeneralPurposeIo).
In order to support GPIO Connection objects with multiple pins, along
with the related Field objects, the following changes to the interface
have been made: The Address is now defined to be the offset in bits of
the field unit from the previous invocation of a Connection. It can be
viewed as a "Pin Number Index" into the connection resource descriptor.
The BitWidth is the exact bit width of the field. It is usually one bit,
but not always. See the ACPICA reference guide (section 8.8.6.2.1) for
additional information and examples.

GPE support: During ACPICA/GPE initialization, ensure that all GPEs with
corresponding _Lxx/_Exx methods are disabled (they may have been enabled
by the firmware), so that they cannot fire until they are enabled via
AcpiUpdateAllGpes. Rafael J. Wysocki.

Added a new return flag for the Event/GPE status interfaces --
AcpiGetEventStatus and AcpiGetGpeStatus. The new
ACPI_EVENT_FLAGS_HAS_HANDLER flag is used to indicate that the event or
GPE currently has a handler associated with it, and can thus actually
affect the system. Lv Zheng.

Example Code and Data Size: These are the sizes for the OS-independent
acpica.lib produced by the Microsoft Visual C++ 9.0 32-bit compiler. The
debug version of the code includes the debug output trace mechanism and
has a much larger code and data size.

Current Release:
Non-Debug Version: 99.1K Code, 27.3K Data, 126.4K Total
Debug Version: 192.8K Code, 79.9K Data, 272.7K Total
Previous Release:
Non-Debug Version: 98.8K Code, 27.3K Data, 126.1K Total
Debug Version: 192.1K Code, 79.8K Data, 271.9K Total

2) iASL Compiler/Disassembler and Tools:

iASL: Fixed a memory allocation/free regression introduced in 20140828
that could cause the compiler to crash. This was introduced inadvertently
during the effort to eliminate compiler memory leaks. ACPICA BZ 1111,
1113.

iASL: Removed two error messages that have been found to create false
positives, until they can be fixed and fully validated (ACPICA BZ 1112):
1) Illegal forward reference within a method
2) Illegal reference across two methods

iASL: Implemented a new option (-lm) to create a hardware mapping file
that summarizes all GPIO, I2C, SPI, and UART connections. This option
works for both the compiler and disassembler. See the iASL compiler user
guide for additional information and examples (section 6.4.6).

AcpiDump: Added support for the version 1 (ACPI 1.0) RSDP in addition to
version 2. This corrects the AE_BAD_HEADER exception seen on systems with
a version 1 RSDP. Lv Zheng ACPICA BZ 1097.

AcpiExec: For Unix versions, don't attempt to put STDIN into raw mode
unless STDIN is actually a terminal. Assists with batch-mode processing.
ACPICA BZ 1114.

Disassembler/AcpiHelp: Added another large group of recognized _HID
values.


----------------------------------------
28 August 2014. Summary of changes for version 20140828:

1) ACPICA kernel-resident subsystem:

Fixed a problem related to the internal use of the Timer() operator where
a 64-bit divide could cause an attempted link to a double-precision math
library. This divide is not actually necessary, so the code was
restructured to eliminate it. Lv Zheng.

ACPI 5.1: Added support for the runtime validation of the _DSD package
(similar to the iASL support).

ACPI 5.1/Headers: Added support for the GICC affinity subtable to the
SRAT table. Hanjun Guo <hanjun.guo@linaro.org>.

Example Code and Data Size: These are the sizes for the OS-independent
acpica.lib produced by the Microsoft Visual C++ 9.0 32-bit compiler. The
debug version of the code includes the debug output trace mechanism and
has a much larger code and data size.

Current Release:
Non-Debug Version: 98.8K Code, 27.3K Data, 126.1K Total
Debug Version: 192.1K Code, 79.8K Data, 271.9K Total
Previous Release:
Non-Debug Version: 98.7K Code, 27.3K Data, 126.0K Total1
Debug Version: 192.0K Code, 79.7K Data, 271.7K Total

2) iASL Compiler/Disassembler and Tools:

AcpiExec: Fixed a problem on unix systems where the original terminal
state was not always properly restored upon exit. Seen when using the -v
option. ACPICA BZ 1104.

iASL: Fixed a problem with the validation of the ranges/length within the
Memory24 resource descriptor. There was a boundary condition when the
range was equal to the (length -1) caused by the fact that these values
are defined in 256-byte blocks, not bytes. ACPICA BZ 1098

Disassembler: Fixed a problem with the GpioInt descriptor interrupt
polarity
flags. The flags are actually 2 bits, not 1, and the "ActiveBoth" keyword
is
now supported properly.

ACPI 5.1: Added the GICC affinity subtable to the SRAT table. Supported
in the disassembler, data table compiler, and table template generator.

iASL: Added a requirement for Device() objects that one of either a _HID
or _ADR must exist within the scope of a Device, as per the ACPI
specification. Remove a similar requirement that was incorrectly in place
for the _DSD object.

iASL: Added error detection for illegal named references within control
methods that would cause runtime failures. Now trapped as errors are: 1)
References to objects within a non-parent control method. 2) Forward
references (within a method) -- for control methods, AML interpreters use
a one-pass parse of control methods. ACPICA BZ 1008.

iASL: Added error checking for dependencies related to the _PSx power
methods. ACPICA BZ 1029.
1) For _PS0, one of these must exist within the same scope: _PS1, _PS2,
_PS3.
2) For _PS1, _PS2, and PS3: A _PS0 object must exist within the same
scope.

iASL and table compiler: Cleanup miscellaneous memory leaks by fully
deploying the existing object and string caches and adding new caches for
the table compiler.

iASL: Split the huge parser source file into multiple subfiles to improve
manageability. Generation now requires the M4 macro preprocessor, which
is part of the Bison distribution on both unix and windows platforms.

AcpiSrc: Fixed and removed all extraneous warnings generated during
entire ACPICA source code scan and/or conversion.


----------------------------------------

24 July 2014. Summary of changes for version 20140724:

The ACPI 5.1 specification has been released and is available at:
http://uefi.org/specs/access


0) ACPI 5.1 support in ACPICA:

ACPI 5.1 is fully supported in ACPICA as of this release.

New predefined names. Support includes iASL and runtime ACPICA
validation.
_CCA (Cache Coherency Attribute).
_DSD (Device-Specific Data). David Box.

Modifications to existing ACPI tables. Support includes headers, iASL
Data Table compiler, disassembler, and the template generator.
FADT - New fields and flags. Graeme Gregory.
GTDT - One new subtable and new fields. Tomasz Nowicki.
MADT - Two new subtables. Tomasz Nowicki.
PCCT - One new subtable.

Miscellaneous.
New notification type for System Resource Affinity change events.


1) ACPICA kernel-resident subsystem:

Fixed a regression introduced in 20140627 where a fault can happen during
the deletion of Alias AML namespace objects. The problem affected both
the core ACPICA and the ACPICA tools including iASL and AcpiExec.

Implemented a new GPE public interface, AcpiMarkGpeForWake. Provides a
simple mechanism to enable wake GPEs that have no associated handler or
control method. Rafael Wysocki.

Updated the AcpiEnableGpe interface to disallow the enable if there is no
handler or control method associated with the particular GPE. This will
help avoid meaningless GPEs and even GPE floods. Rafael Wysocki.

Updated GPE handling and dispatch by disabling the GPE before clearing
the status bit for edge-triggered GPEs. Lv Zheng.

Added Timer() support to the AML Debug object. The current timer value is
now displayed with each invocation of (Store to) the debug object to
enable simple generation of execution times for AML code (method
execution for example.) ACPICA BZ 1093.

Example Code and Data Size: These are the sizes for the OS-independent
acpica.lib produced by the Microsoft Visual C++ 9.0 32-bit compiler. The
debug version of the code includes the debug output trace mechanism and
has a much larger code and data size.

Current Release:
Non-Debug Version: 98.7K Code, 27.3K Data, 126.0K Total
Debug Version: 192.0K Code, 79.7K Data, 271.7K Total
Previous Release:
Non-Debug Version: 98.7K Code, 27.2K Data, 125.9K Total
Debug Version: 191.7K Code, 79.6K Data, 271.3K Total


2) iASL Compiler/Disassembler and Tools:

Fixed an issue with the recently added local printf implementation,
concerning width/precision specifiers that could cause incorrect output.
Lv Zheng. ACPICA BZ 1094.

Disassembler: Added support to detect buffers that contain UUIDs and
disassemble them to an invocation of the ToUUID operator. Also emit
commented descriptions of known ACPI-related UUIDs.

AcpiHelp: Added support to display known ACPI-related UUIDs. New option,
-u. Adds three new files.

iASL: Update table compiler and disassembler for DMAR table changes that
were introduced in September 2013. With assistance by David Woodhouse.

----------------------------------------
27 June 2014. Summary of changes for version 20140627:

1) ACPICA kernel-resident subsystem:

Formatted Output: Implemented local versions of standard formatted output
utilities such as printf, etc. Over time, it has been discovered that
there are in fact many portability issues with printf, and the addition
of this feature will fix/prevent these issues once and for all. Some
known issues are summarized below:

1) Output of 64-bit values is not portable. For example, UINT64 is %ull
for the Linux kernel and is %uI64 for some MSVC versions.
2) Invoking printf consistently in a manner that is portable across both
32-bit and 64-bit platforms is difficult at best in many situations.
3) The output format for pointers varies from system to system (leading
zeros especially), and leads to inconsistent output from ACPICA across
platforms.
4) Certain platform-specific printf formats may conflict with ACPICA use.
5) If there is no local C library available, ACPICA now has local support
for printf.

-- To address these printf issues in a complete manner, ACPICA now
directly implements a small subset of printf format specifiers, only
those that it requires. Adds a new file, utilities/utprint.c. Lv Zheng.

Implemented support for ACPICA generation within the EFI environment.
Initially, the AcpiDump utility is supported in the UEFI shell
environment. Lv Zheng.

Added a new external interface, AcpiLogError, to improve ACPICA
portability. This allows the host to redirect error messages from the
ACPICA utilities. Lv Zheng.

Added and deployed new OSL file I/O interfaces to improve ACPICA
portability:
AcpiOsOpenFile
AcpiOsCloseFile
AcpiOsReadFile
AcpiOsWriteFile
AcpiOsGetFileOffset
AcpiOsSetFileOffset
There are C library implementations of these functions in the new file
service_layers/oslibcfs.c -- however, the functions can be implemented by
the local host in any way necessary. Lv Zheng.

Implemented a mechanism to disable/enable ACPI table checksum validation
at runtime. This can be useful when loading tables very early during OS
initialization when it may not be possible to map the entire table in
order to compute the checksum. Lv Zheng.

Fixed a buffer allocation issue for the Generic Serial Bus support.
Originally, a fixed buffer length was used. This change allows for
variable-length buffers based upon the protocol indicated by the field
access attributes. Reported by Lan Tianyu. Lv Zheng.

Fixed a problem where an object detached from a namespace node was not
properly terminated/cleared and could cause a circular list problem if
reattached. ACPICA BZ 1063. David Box.

Fixed a possible recursive lock acquisition in hwregs.c. Rakib Mullick.

Fixed a possible memory leak in an error return path within the function
AcpiUtCopyIobjectToIobject. ACPICA BZ 1087. Colin Ian King.

Example Code and Data Size: These are the sizes for the OS-independent
acpica.lib produced by the Microsoft Visual C++ 9.0 32-bit compiler. The
debug version of the code includes the debug output trace mechanism and
has a much larger code and data size.

Current Release:
Non-Debug Version: 98.7K Code, 27.2K Data, 125.9K Total
Debug Version: 191.7K Code, 79.6K Data, 271.3K Total
Previous Release:
Non-Debug Version: 96.8K Code, 27.2K Data, 124.0K Total
Debug Version: 189.5K Code, 79.7K Data, 269.2K Total


2) iASL Compiler/Disassembler and Tools:

Disassembler: Add dump of ASCII equivalent text within a comment at the
end of each line of the output for the Buffer() ASL operator.

AcpiDump: Miscellaneous changes:
Fixed repetitive table dump in -n mode.
For older EFI platforms, use the ACPI 1.0 GUID during RSDP search if
the ACPI 2.0 GUID fails.

iASL: Fixed a problem where the compiler could fault if incorrectly given
an acpidump output file as input. ACPICA BZ 1088. David Box.

AcpiExec/AcpiNames: Fixed a problem where these utilities could fault if
they are invoked without any arguments.

Debugger: Fixed a possible memory leak in an error return path. ACPICA BZ
1086. Colin Ian King.

Disassembler: Cleaned up a block of code that extracts a parent Op
object. Added a comment that explains that the parent is guaranteed to be
valid in this case. ACPICA BZ 1069.

----------------------------------------
24 April 2014. Summary of changes for version 20140424:

1) ACPICA kernel-resident subsystem:

Implemented support to skip/ignore NULL address entries in the RSDT/XSDT.
Some of these tables are known to contain a trailing NULL entry. Lv
Zheng.

Removed an extraneous error message for the case where there are a large
number of system GPEs (> 124). This was the "32-bit FADT register is too
long to convert to GAS struct" message, which is irrelevant for GPEs
since the GPEx_BLK_LEN fields of the FADT are always used instead of the
(limited capacity) GAS bit length. Also, several changes to ensure proper
support for GPE numbers > 255, where some "GPE number" fields were 8-bits
internally.

Implemented and deployed additional configuration support for the public
ACPICA external interfaces. Entire classes of interfaces can now be
easily modified or configured out, replaced by stubbed inline functions
by default. Lv Zheng.

Moved all public ACPICA runtime configuration globals to the public
ACPICA external interface file for convenience. Also, removed some
obsolete/unused globals. See the file acpixf.h. Lv Zheng.

Documentation: Added a new section to the ACPICA reference describing the
maximum number of GPEs that can be supported by the FADT-defined GPEs in
block zero and one. About 1200 total. See section 4.4.1 of the ACPICA
reference.

Example Code and Data Size: These are the sizes for the OS-independent
acpica.lib produced by the Microsoft Visual C++ 9.0 32-bit compiler. The
debug version of the code includes the debug output trace mechanism and
has a much larger code and data size.

Current Release:
Non-Debug Version: 96.8K Code, 27.2K Data, 124.0K Total
Debug Version: 189.5K Code, 79.7K Data, 269.2K Total
Previous Release:
Non-Debug Version: 97.0K Code, 27.2K Data, 124.2K Total
Debug Version: 189.7K Code, 79.5K Data, 269.2K Total


2) iASL Compiler/Disassembler and Tools:

iASL and disassembler: Add full support for the LPIT table (Low Power
Idle Table). Includes support in the disassembler, data table compiler,
and template generator.

AcpiDump utility:
1) Add option to force the use of the RSDT (over the XSDT).
2) Improve validation of the RSDP signature (use 8 chars instead of 4).

iASL: Add check for predefined packages that are too large. For
predefined names that contain subpackages, check if each subpackage is
too large. (Check for too small already exists.)

Debugger: Updated the GPE command (which simulates a GPE by executing the
GPE code paths in ACPICA). The GPE device is now optional, and defaults
to the GPE 0/1 FADT-defined blocks.

Unix application OSL: Update line-editing support. Add additional error
checking and take care not to reset terminal attributes on exit if they
were never set. This should help guarantee that the terminal is always
left in the previous state on program exit.

----------------------------------------
25 March 2014. Summary of changes for version 20140325:

1) ACPICA kernel-resident subsystem:

Updated the auto-serialize feature for control methods. This feature
automatically serializes all methods that create named objects in order
to prevent runtime errors. The update adds support to ignore the
currently executing AML SyncLevel when invoking such a method, in order
to prevent disruption of any existing SyncLevel priorities that may exist
in the AML code. Although the use of SyncLevels is relatively rare, this
change fixes a regression where an AE_AML_MUTEX_ORDER exception can
appear on some machines starting with the 20140214 release.

Added a new external interface to allow the host to install ACPI tables
very early, before the namespace is even created. AcpiInstallTable gives
the host additional flexibility for ACPI table management. Tables can be
installed directly by the host as if they had originally appeared in the
XSDT/RSDT. Installed tables can be SSDTs or other ACPI data tables
(anything except the DSDT and FACS). Adds a new file, tbdata.c, along
with additional internal restructuring and cleanup. See the ACPICA
Reference for interface details. Lv Zheng.

Added validation of the checksum for all incoming dynamically loaded
tables (via external interfaces or via AML Load/LoadTable operators). Lv
Zheng.

Updated the use of the AcpiOsWaitEventsComplete interface during Notify
and GPE handler removal. Restructured calls to eliminate possible race
conditions. Lv Zheng.

Added a warning for the use/execution of the ASL/AML Unload (table)
operator. This will help detect and identify machines that use this
operator if and when it is ever used. This operator has never been seen
in the field and the usage model and possible side-effects of the drastic
runtime action of a full table removal are unknown.

Reverted the use of #pragma push/pop which was introduced in the 20140214
release. It appears that push and pop are not implemented by enough
compilers to make the use of this feature feasible for ACPICA at this
time. However, these operators may be deployed in a future ACPICA
release.

Added the missing EXPORT_SYMBOL macros for the install and remove SCI
handler interfaces.

Source code generation:
1) Disabled the use of the "strchr" macro for the gcc-specific
generation. For some versions of gcc, this macro can periodically expose
a compiler bug which in turn causes compile-time error(s).
2) Added support for PPC64 compilation. Colin Ian King.

Example Code and Data Size: These are the sizes for the OS-independent
acpica.lib produced by the Microsoft Visual C++ 9.0 32-bit compiler. The
debug version of the code includes the debug output trace mechanism and
has a much larger code and data size.

Current Release:
Non-Debug Version: 97.0K Code, 27.2K Data, 124.2K Total
Debug Version: 189.7K Code, 79.5K Data, 269.2K Total
Previous Release:
Non-Debug Version: 96.5K Code, 27.2K Data, 123.7K Total
Debug Version: 188.6K Code, 79.0K Data, 267.6K Total


2) iASL Compiler/Disassembler and Tools:

Disassembler: Added several new features to improve the readability of
the resulting ASL code. Extra information is emitted within comment
fields in the ASL code:
1) Known _HID/_CID values are decoded to descriptive text.
2) Standard values for the Notify() operator are decoded to descriptive
text.
3) Target operands are expanded to full pathnames (in a comment) when
possible.

Disassembler: Miscellaneous updates for extern() handling:
1) Abort compiler if file specified by -fe option does not exist.
2) Silence unnecessary warnings about argument count mismatches.
3) Update warning messages concerning unresolved method externals.
4) Emit "UnknownObj" keyword for externals whose type cannot be
determined.

AcpiHelp utility:
1) Added the -a option to display both the ASL syntax and the AML
encoding for an input ASL operator. This effectively displays all known
information about an ASL operator with one AcpiHelp invocation.
2) Added substring match support (similar to a wildcard) for the -i
(_HID/PNP IDs) option.

iASL/Disassembler: Since this tool does not yet support execution on big-
endian machines, added detection of endianness and an error message if
execution is attempted on big-endian. Support for big-endian within iASL
is a feature that is on the ACPICA to-be-done list.

AcpiBin utility:
1) Remove option to extract binary files from an acpidump; this function
is made obsolete by the AcpiXtract utility.
2) General cleanup of open files and allocated buffers.

----------------------------------------
14 February 2014. Summary of changes for version 20140214:

1) ACPICA kernel-resident subsystem:

Implemented a new mechanism to proactively prevent problems with ill-
behaved reentrant control methods that create named ACPI objects. This
behavior is illegal as per the ACPI specification, but is nonetheless
frequently seen in the field. Previously, this could lead to an
AE_ALREADY_EXISTS exception if the method was actually entered by more
than one thread. This new mechanism detects such methods at table load
time and marks them "serialized" to prevent reentrancy. A new global
option, AcpiGbl_AutoSerializeMethods, has been added to disable this
feature if desired. This mechanism and global option obsoletes and
supersedes the previous AcpiGbl_SerializeAllMethods option.

Added the "Windows 2013" string to the _OSI support. ACPICA will now
respond TRUE to _OSI queries with this string. It is the stated policy of
ACPICA to add new strings to the _OSI support as soon as possible after
they are defined. See the full ACPICA _OSI policy which has been added to
the utilities/utosi.c file.

Hardened/updated the _PRT return value auto-repair code:
1) Do not abort the repair on a single subpackage failure, continue to
check all subpackages.
2) Add check for the minimum subpackage length (4).
3) Properly handle extraneous NULL package elements.

Added support to avoid the possibility of infinite loops when traversing
object linked lists. Never allow an infinite loop, even in the face of
corrupted object lists.

ACPICA headers: Deployed the use of #pragma pack(push) and #pragma
pack(pop) directives to ensure that the ACPICA headers are independent of
compiler settings or other host headers.

Example Code and Data Size: These are the sizes for the OS-independent
acpica.lib produced by the Microsoft Visual C++ 9.0 32-bit compiler. The
debug version of the code includes the debug output trace mechanism and
has a much larger code and data size.

Current Release:
Non-Debug Version: 96.5K Code, 27.2K Data, 123.7K Total
Debug Version: 188.6K Code, 79.0K Data, 267.6K Total
Previous Release:
Non-Debug Version: 96.2K Code, 27.0K Data, 123.2K Total
Debug Version: 187.5K Code, 78.3K Data, 265.8K Total


2) iASL Compiler/Disassembler and Tools:

iASL/Table-compiler: Fixed a problem with support for the SPMI table. The
first reserved field was incorrectly forced to have a value of zero. This
change correctly forces the field to have a value of one. ACPICA BZ 1081.

Debugger: Added missing support for the "Extra" and "Data" subobjects
when displaying object data.

Debugger: Added support to display entire object linked lists when
displaying object data.

iASL: Removed the obsolete -g option to obtain ACPI tables from the
Windows registry. This feature has been superseded by the acpidump
utility.

----------------------------------------
14 January 2014. Summary of changes for version 20140114:

1) ACPICA kernel-resident subsystem:

Updated all ACPICA copyrights and signons to 2014. Added the 2014
copyright to all module headers and signons, including the standard Linux
header. This affects virtually every file in the ACPICA core subsystem,
iASL compiler, all ACPICA utilities, and the test suites.

Improved parameter validation for AcpiInstallGpeBlock. Added the
following checks:
1) The incoming device handle refers to type ACPI_TYPE_DEVICE.
2) There is not already a GPE block attached to the device.
Likewise, with AcpiRemoveGpeBlock, ensure that the incoming object is a
device.

Correctly support "references" in the ACPI_OBJECT. This change fixes the
support to allow references (namespace nodes) to be passed as arguments
to control methods via the evaluate object interface. This is probably
most useful for testing purposes, however.

Improved support for 32/64 bit physical addresses in printf()-like
output. This change improves the support for physical addresses in printf
debug statements and other output on both 32-bit and 64-bit hosts. It
consistently outputs the appropriate number of bytes for each host. The
%p specifier is unsatisfactory since it does not emit uniform output on
all hosts/clib implementations (on some, leading zeros are not supported,
leading to difficult-to-read output).

Example Code and Data Size: These are the sizes for the OS-independent
acpica.lib produced by the Microsoft Visual C++ 9.0 32-bit compiler. The
debug version of the code includes the debug output trace mechanism and
has a much larger code and data size.

Current Release:
Non-Debug Version: 96.2K Code, 27.0K Data, 123.2K Total
Debug Version: 187.5K Code, 78.3K Data, 265.8K Total
Previous Release:
Non-Debug Version: 96.1K Code, 27.0K Data, 123.1K Total
Debug Version: 185.6K Code, 77.3K Data, 262.9K Total


2) iASL Compiler/Disassembler and Tools:

iASL: Fix a possible fault when using the Connection() operator. Fixes a
problem if the parent Field definition for the Connection operator refers
to an operation region that does not exist. ACPICA BZ 1064.

AcpiExec: Load of local test tables is now optional. The utility has the
capability to load some various tables to test features of ACPICA.
However, there are enough of them that the output of the utility became
confusing. With this change, only the required local tables are displayed
(RSDP, XSDT, etc.) along with the actual tables loaded via the command
line specification. This makes the default output simler and easier to
understand. The -el command line option restores the original behavior
for testing purposes.

AcpiExec: Added support for overlapping operation regions. This change
expands the simulation of operation regions by supporting regions that
overlap within the given address space. Supports SystemMemory and
SystemIO. ASLTS test suite updated also. David Box. ACPICA BZ 1031.

AcpiExec: Added region handler support for PCI_Config and EC spaces. This
allows AcpiExec to simulate these address spaces, similar to the current
support for SystemMemory and SystemIO.

Debugger: Added new command to read/write/compare all namespace objects.
The command "test objects" will exercise the entire namespace by writing
new values to each data object, and ensuring that the write was
successful. The original value is then restored and verified.

Debugger: Added the "test predefined" command. This change makes this
test public and puts it under the new "test" command. The test executes
each and every predefined name within the current namespace.

show more ...

import new acpica

Import ACPICA 20110623.

Selected changes since 20110211 include, among other things, fixes to _PRW
parsing, fix to a regression with the Load() operator, improvements in NULL
package element removal

Import ACPICA 20110623.

Selected changes since 20110211 include, among other things, fixes to _PRW
parsing, fix to a regression with the Load() operator, improvements in NULL
package element removal, support for "spurious" global lock interrupts,
execution of orphaned _REG methods under acpiec(4), and smaller iasl(8)
improvements.

show more ...