hw, target: Add ResetType argument to hold and exit phase methods

We pass a ResetType argument to the Resettable class enter
phase method, but we don't pass it to hold and exit, even though
the call

hw, target: Add ResetType argument to hold and exit phase methods

We pass a ResetType argument to the Resettable class enter
phase method, but we don't pass it to hold and exit, even though
the callsites have it readily available. This means that if
a device cared about the ResetType it would need to record it
in the enter phase method to use later on. Pass the type to
all three of the phase methods to avoid having to do that.

Commit created with

for dir in hw target include; do \
spatch --macro-file scripts/cocci-macro-file.h \
--sp-file scripts/coccinelle/reset-type.cocci \
--keep-comments --smpl-spacing --in-place \
--include-headers --dir $dir; done

and no manual edits.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Message-id: 20240412160809.1260625-5-peter.maydell@linaro.org

show more ...

hw, target: Add ResetType argument to hold and exit phase methods

We pass a ResetType argument to the Resettable class enter
phase method, but we don't pass it to hold and exit, even though
the call

hw, target: Add ResetType argument to hold and exit phase methods

We pass a ResetType argument to the Resettable class enter
phase method, but we don't pass it to hold and exit, even though
the callsites have it readily available. This means that if
a device cared about the ResetType it would need to record it
in the enter phase method to use later on. Pass the type to
all three of the phase methods to avoid having to do that.

Commit created with

for dir in hw target include; do \
spatch --macro-file scripts/cocci-macro-file.h \
--sp-file scripts/coccinelle/reset-type.cocci \
--keep-comments --smpl-spacing --in-place \
--include-headers --dir $dir; done

and no manual edits.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Message-id: 20240412160809.1260625-5-peter.maydell@linaro.org

show more ...

hw, target: Add ResetType argument to hold and exit phase methods

We pass a ResetType argument to the Resettable class enter
phase method, but we don't pass it to hold and exit, even though
the call

hw, target: Add ResetType argument to hold and exit phase methods

We pass a ResetType argument to the Resettable class enter
phase method, but we don't pass it to hold and exit, even though
the callsites have it readily available. This means that if
a device cared about the ResetType it would need to record it
in the enter phase method to use later on. Pass the type to
all three of the phase methods to avoid having to do that.

Commit created with

for dir in hw target include; do \
spatch --macro-file scripts/cocci-macro-file.h \
--sp-file scripts/coccinelle/reset-type.cocci \
--keep-comments --smpl-spacing --in-place \
--include-headers --dir $dir; done

and no manual edits.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Message-id: 20240412160809.1260625-5-peter.maydell@linaro.org

show more ...

hw, target: Add ResetType argument to hold and exit phase methods

We pass a ResetType argument to the Resettable class enter
phase method, but we don't pass it to hold and exit, even though
the call

hw, target: Add ResetType argument to hold and exit phase methods

We pass a ResetType argument to the Resettable class enter
phase method, but we don't pass it to hold and exit, even though
the callsites have it readily available. This means that if
a device cared about the ResetType it would need to record it
in the enter phase method to use later on. Pass the type to
all three of the phase methods to avoid having to do that.

Commit created with

for dir in hw target include; do \
spatch --macro-file scripts/cocci-macro-file.h \
--sp-file scripts/coccinelle/reset-type.cocci \
--keep-comments --smpl-spacing --in-place \
--include-headers --dir $dir; done

and no manual edits.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Message-id: 20240412160809.1260625-5-peter.maydell@linaro.org

show more ...

vmbus: Print a warning when enabled without the recommended set of features

Some Windows versions crash at boot or fail to enable the VMBus device if
they don't see the expected set of Hyper-V featu

vmbus: Print a warning when enabled without the recommended set of features

Some Windows versions crash at boot or fail to enable the VMBus device if
they don't see the expected set of Hyper-V features (enlightenments).

Since this provides poor user experience let's warn user if the VMBus
device is enabled without the recommended set of Hyper-V features.

The recommended set is the minimum set of Hyper-V features required to make
the VMBus device work properly in Windows Server versions 2016, 2019 and
2022.

Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>

show more ...

vmbus: Switch bus reset to 3-phase-reset

Switch vmbus from using BusClass::reset to the Resettable interface.

This has no behavioural change, because the BusClass code to support
subclasses that us

vmbus: Switch bus reset to 3-phase-reset

Switch vmbus from using BusClass::reset to the Resettable interface.

This has no behavioural change, because the BusClass code to support
subclasses that use the legacy BusClass::reset will call that method
in the hold phase of 3-phase reset.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Cédric Le Goater <clg@redhat.com>
Acked-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-id: 20240119163512.3810301-3-peter.maydell@linaro.org

show more ...

hw/hyperv: Constify VMState

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231221031652.119827-30-richard.henderson@linaro.org>

util/uuid: Add UUID_STR_LEN definition

qemu_uuid_unparse() includes a trailing NUL when writing the uuid
string and the buffer size should be UUID_FMT_LEN + 1 bytes. Add a
define for this size and u

util/uuid: Add UUID_STR_LEN definition

qemu_uuid_unparse() includes a trailing NUL when writing the uuid
string and the buffer size should be UUID_FMT_LEN + 1 bytes. Add a
define for this size and use it where required.

Cc: Fam Zheng <fam@euphon.net>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: "Denis V. Lunev" <den@openvz.org>
Signed-off-by: Cédric Le Goater <clg@redhat.com>

show more ...

util/uuid: Add UUID_STR_LEN definition

qemu_uuid_unparse() includes a trailing NUL when writing the uuid
string and the buffer size should be UUID_FMT_LEN + 1 bytes. Add a
define for this size and u

util/uuid: Add UUID_STR_LEN definition

qemu_uuid_unparse() includes a trailing NUL when writing the uuid
string and the buffer size should be UUID_FMT_LEN + 1 bytes. Add a
define for this size and use it where required.

Cc: Fam Zheng <fam@euphon.net>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: "Denis V. Lunev" <den@openvz.org>
Signed-off-by: Cédric Le Goater <clg@redhat.com>

show more ...

hw/hyperv/vmbus: Use device_cold_reset() and bus_cold_reset()

In the vmbus code we currently use the legacy functions
qdev_reset_all() and qbus_reset_all(). These perform a recursive
reset, startin

hw/hyperv/vmbus: Use device_cold_reset() and bus_cold_reset()

In the vmbus code we currently use the legacy functions
qdev_reset_all() and qbus_reset_all(). These perform a recursive
reset, starting from either a qbus or a qdev. However they do not
permit any of the devices in the tree to use three-phase reset,
because device reset goes through the device_legacy_reset() function
that only calls the single DeviceClass::reset method.

Switch to using the device_cold_reset() and bus_cold_reset()
functions. These also perform a recursive reset, where first the
children are reset and then finally the parent, but they use the new
(...in 2020...) Resettable mechanism, which supports both the old
style single-reset method and also the new 3-phase reset handling.

This should be a no-behaviour-change commit which just reduces the
use of a deprecated API.

Commit created with:
sed -i -e 's/qdev_reset_all/device_cold_reset/g;s/qbus_reset_all/bus_cold_reset/g' hw/hyperv/*.c

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/hyperv/vmbus: Use device_cold_reset() and bus_cold_reset()

In the vmbus code we currently use the legacy functions
qdev_reset_all() and qbus_reset_all(). These perform a recursive
reset, startin

hw/hyperv/vmbus: Use device_cold_reset() and bus_cold_reset()

In the vmbus code we currently use the legacy functions
qdev_reset_all() and qbus_reset_all(). These perform a recursive
reset, starting from either a qbus or a qdev. However they do not
permit any of the devices in the tree to use three-phase reset,
because device reset goes through the device_legacy_reset() function
that only calls the single DeviceClass::reset method.

Switch to using the device_cold_reset() and bus_cold_reset()
functions. These also perform a recursive reset, where first the
children are reset and then finally the parent, but they use the new
(...in 2020...) Resettable mechanism, which supports both the old
style single-reset method and also the new 3-phase reset handling.

This should be a no-behaviour-change commit which just reduces the
use of a deprecated API.

Commit created with:
sed -i -e 's/qdev_reset_all/device_cold_reset/g;s/qbus_reset_all/bus_cold_reset/g' hw/hyperv/*.c

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

error: Drop some obviously superfluous error_propagate()

When error_propagate(errp, local_err) is the only reader of
@local_err, we can just as well change its writers to write @errp
directly, and d

error: Drop some obviously superfluous error_propagate()

When error_propagate(errp, local_err) is the only reader of
@local_err, we can just as well change its writers to write @errp
directly, and drop the error_propagate() along with @local_err.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221121085054.683122-2-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>

show more ...

Drop more useless casts from void * to pointer

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20221123133811.1398562-1-armbru@redha

Drop more useless casts from void * to pointer

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20221123133811.1398562-1-armbru@redhat.com>

show more ...

error: Drop some obviously superfluous error_propagate()

When error_propagate(errp, local_err) is the only reader of
@local_err, we can just as well change its writers to write @errp
directly, and d

error: Drop some obviously superfluous error_propagate()

When error_propagate(errp, local_err) is the only reader of
@local_err, we can just as well change its writers to write @errp
directly, and drop the error_propagate() along with @local_err.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221121085054.683122-2-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>

show more ...

Drop more useless casts from void * to pointer

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20221123133811.1398562-1-armbru@redha

Drop more useless casts from void * to pointer

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20221123133811.1398562-1-armbru@redhat.com>

show more ...

hw/hyperv/vmbus: Remove unused vmbus_load/save_req()

vmbus_save_req() and vmbus_load_req() are not used.
Remove them to avoid maintaining dead code.

This essentially reverts commit 4dd8a7064b8a6527

hw/hyperv/vmbus: Remove unused vmbus_load/save_req()

vmbus_save_req() and vmbus_load_req() are not used.
Remove them to avoid maintaining dead code.

This essentially reverts commit 4dd8a7064b8a6527f99a62be11
("vmbus: add infrastructure to save/load vmbus requests").

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211106134155.582312-2-philmd@redhat.com>
[MSS: Remove also corresponding variables, which are now unused]
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>

show more ...

hw/hyperv/vmbus: Remove unused vmbus_load/save_req()

vmbus_save_req() and vmbus_load_req() are not used.
Remove them to avoid maintaining dead code.

This essentially reverts commit 4dd8a7064b8a6527

hw/hyperv/vmbus: Remove unused vmbus_load/save_req()

vmbus_save_req() and vmbus_load_req() are not used.
Remove them to avoid maintaining dead code.

This essentially reverts commit 4dd8a7064b8a6527f99a62be11
("vmbus: add infrastructure to save/load vmbus requests").

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211106134155.582312-2-philmd@redhat.com>
[MSS: Remove also corresponding variables, which are now unused]
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>

show more ...

dma: Let dma_memory_map() take MemTxAttrs argument

Let devices specify transaction attributes when calling
dma_memory_map().

Patch created mechanically using spatch with this script:

@@
expres

dma: Let dma_memory_map() take MemTxAttrs argument

Let devices specify transaction attributes when calling
dma_memory_map().

Patch created mechanically using spatch with this script:

@@
expression E1, E2, E3, E4;
@@
- dma_memory_map(E1, E2, E3, E4)
+ dma_memory_map(E1, E2, E3, E4, MEMTXATTRS_UNSPECIFIED)

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20211223115554.3155328-7-philmd@redhat.com>

show more ...

qbus: Rename qbus_create() to qbus_new()

Rename the "allocate and return" qbus creation function to
qbus_new(), to bring it into line with our _init vs _new convention.

Signed-off-by: Peter Maydell

qbus: Rename qbus_create() to qbus_new()

Rename the "allocate and return" qbus creation function to
qbus_new(), to bring it into line with our _init vs _new convention.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Corey Minyard <cminyard@mvista.com>
Message-id: 20210923121153.23754-6-peter.maydell@linaro.org

show more ...

vmbus: Don't make QOM property registration conditional

Having properties registered conditionally makes QOM type
introspection difficult. Instead of skipping registration of the
"instanceid" prope

vmbus: Don't make QOM property registration conditional

Having properties registered conditionally makes QOM type
introspection difficult. Instead of skipping registration of the
"instanceid" property, always register the property but validate
its value against the instance id required by the class.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <20201009200701.1830060-1-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

show more ...

qdev: Move softmmu properties to qdev-properties-system.h

Move the property types and property macros implemented in
qdev-properties-system.c to a new qdev-properties-system.h
header.

Signed-off-by

qdev: Move softmmu properties to qdev-properties-system.h

Move the property types and property macros implemented in
qdev-properties-system.c to a new qdev-properties-system.h
header.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20201211220529.2290218-16-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

show more ...

qemu/atomic.h: rename atomic_ to qatomic_

clang's C11 atomic_fetch_*() functions only take a C11 atomic type
pointer argument. QEMU uses direct types (int, etc) and this causes a
compiler error when

qemu/atomic.h: rename atomic_ to qatomic_

clang's C11 atomic_fetch_*() functions only take a C11 atomic type
pointer argument. QEMU uses direct types (int, etc) and this causes a
compiler error when a QEMU code calls these functions in a source file
that also included <stdatomic.h> via a system header file:

$ CC=clang CXX=clang++ ./configure ... && make
../util/async.c:79:17: error: address argument to atomic operation must be a pointer to _Atomic type ('unsigned int *' invalid)

Avoid using atomic_*() names in QEMU's atomic.h since that namespace is
used by <stdatomic.h>. Prefix QEMU's APIs with 'q' so that atomic.h
and <stdatomic.h> can co-exist. I checked /usr/include on my machine and
searched GitHub for existing "qatomic_" users but there seem to be none.

This patch was generated using:

$ git grep -h -o '\<atomic\(64\)\?_[a-z0-9_]\+' include/qemu/atomic.h | \
sort -u >/tmp/changed_identifiers
$ for identifier in $(</tmp/changed_identifiers); do
sed -i "s%\<$identifier\>%q$identifier%g" \
$(git grep -I -l "\<$identifier\>")
done

I manually fixed line-wrap issues and misaligned rST tables.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200923105646.47864-1-stefanha@redhat.com>

show more ...

hw: hyperv: vmbus: Fix 32bit compilation

Fix 32-bit build error for vmbus:

hw/hyperv/vmbus.c: In function ‘gpadl_iter_io’:
hw/hyperv/vmbus.c:383:13: error: cast to pointer from integer of diffe

hw: hyperv: vmbus: Fix 32bit compilation

Fix 32-bit build error for vmbus:

hw/hyperv/vmbus.c: In function ‘gpadl_iter_io’:
hw/hyperv/vmbus.c:383:13: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
383 | p = (void *)(((uintptr_t)iter->map & TARGET_PAGE_MASK) | off_in_page);
| ^
cc1: all warnings being treated as errors

Fixes: 0d71f7082d7 ("vmbus: vmbus implementation")
Signed-off-by: Jon Doron <arilou@gmail.com>
Tested-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Message-Id: <20200715084326.678715-3-arilou@gmail.com>
[lv: updated with commit description from <20200906050113.2783642-1-richard.henderson@linaro.org>]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

show more ...

vmbus: Move QOM macros to vmbus.h

Move all declarations related to TYPE_VMBUS to the same place in
vmbus.h.

This will make future conversion to OBJECT_DECLARE* easier.

Reviewed-by: Daniel P. Berra

vmbus: Move QOM macros to vmbus.h

Move all declarations related to TYPE_VMBUS to the same place in
vmbus.h.

This will make future conversion to OBJECT_DECLARE* easier.

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Tested-By: Roman Bolshakov <r.bolshakov@yadro.com>
Message-Id: <20200825192110.3528606-35-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

show more ...

error: Avoid unnecessary error_propagate() after error_setg()

Replace

error_setg(&err, ...);
error_propagate(errp, err);

by

error_setg(errp, ...);

Related pattern:

if (...) {

error: Avoid unnecessary error_propagate() after error_setg()

Replace

error_setg(&err, ...);
error_propagate(errp, err);

by

error_setg(errp, ...);

Related pattern:

if (...) {
error_setg(&err, ...);
goto out;
}
...
out:
error_propagate(errp, err);
return;

When all paths to label out are that way, replace by

if (...) {
error_setg(errp, ...);
return;
}

and delete the label along with the error_propagate().

When we have at most one other path that actually needs to propagate,
and maybe one at the end that where propagation is unnecessary, e.g.

foo(..., &err);
if (err) {
goto out;
}
...
bar(..., &err);
out:
error_propagate(errp, err);
return;

move the error_propagate() to where it's needed, like

if (...) {
foo(..., &err);
error_propagate(errp, err);
return;
}
...
bar(..., errp);
return;

and transform the error_setg() as above.

In some places, the transformation results in obviously unnecessary
error_propagate(). The next few commits will eliminate them.

Bonus: the elimination of gotos will make later patches in this series
easier to review.

Candidates for conversion tracked down with this Coccinelle script:

@@
identifier err, errp;
expression list args;
@@
- error_setg(&err, args);
+ error_setg(errp, args);
... when != err
error_propagate(errp, err);

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200707160613.848843-34-armbru@redhat.com>

show more ...