hw: Use device_class_set_legacy_reset() instead of opencoding

Use device_class_set_legacy_reset() instead of opencoding an
assignment to DeviceClass::reset. This change was produced
with:
spatch --

hw: Use device_class_set_legacy_reset() instead of opencoding

Use device_class_set_legacy_reset() instead of opencoding an
assignment to DeviceClass::reset. This change was produced
with:
spatch --macro-file scripts/cocci-macro-file.h \
--sp-file scripts/coccinelle/device-reset.cocci \
--keep-comments --smpl-spacing --in-place --dir hw

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240830145812.1967042-8-peter.maydell@linaro.org

show more ...

hw/sd: Constify VMState

Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

hw/sd: Constify VMState

Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231221031652.119827-53-richard.henderson@linaro.org>

show more ...

hw/sd: Declare QOM types using DEFINE_TYPES() macro

When multiple QOM types are registered in the same file,
it is simpler to use the the DEFINE_TYPES() macro. In
particular because type array decla

hw/sd: Declare QOM types using DEFINE_TYPES() macro

When multiple QOM types are registered in the same file,
it is simpler to use the the DEFINE_TYPES() macro. In
particular because type array declared with such macro
are easier to review.

Mechanical transformation using the following comby script:

[pattern-x1]
match='''
static const TypeInfo :[i1~.*_info] = {
:[body]
};
static void :[rt1~.*_register_type.](void)
{
type_register_static(&:[i2~.*_info]);
}
type_init(:[rt2~.*_register_type.])
'''
rewrite='''
static const TypeInfo :[i1][] = {
{
:[body]
},
};

DEFINE_TYPES(:[i1])
'''
rule='where :[i1] == :[i2], :[rt1] == :[rt2]'

[pattern-x2]
match='''
static const TypeInfo :[i1a~.*_info] = {
:[body1]
};
...
static const TypeInfo :[i2a~.*_info] = {
:[body2]
};
static void :[rt1~.*_register_type.](void)
{
type_register_static(&:[i1b~.*_info]);
type_register_static(&:[i2b~.*_info]);
}
type_init(:[rt2~.*_register_type.])
'''
rewrite='''
static const TypeInfo :[i1a][] = {
{
:[body1]
},
{
:[body2]
},
};

DEFINE_TYPES(:[i1a])
'''
rule='''
where
:[i1a] == :[i1b],
:[i2a] == :[i2b],
:[rt1] == :[rt2]
'''

and re-indented manually.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20231031080603.86889-2-philmd@linaro.org>

show more ...

hw/sd: Declare QOM types using DEFINE_TYPES() macro

When multiple QOM types are registered in the same file,
it is simpler to use the the DEFINE_TYPES() macro. In
particular because type array decla

hw/sd: Declare QOM types using DEFINE_TYPES() macro

When multiple QOM types are registered in the same file,
it is simpler to use the the DEFINE_TYPES() macro. In
particular because type array declared with such macro
are easier to review.

Mechanical transformation using the following comby script:

[pattern-x1]
match='''
static const TypeInfo :[i1~.*_info] = {
:[body]
};
static void :[rt1~.*_register_type.](void)
{
type_register_static(&:[i2~.*_info]);
}
type_init(:[rt2~.*_register_type.])
'''
rewrite='''
static const TypeInfo :[i1][] = {
{
:[body]
},
};

DEFINE_TYPES(:[i1])
'''
rule='where :[i1] == :[i2], :[rt1] == :[rt2]'

[pattern-x2]
match='''
static const TypeInfo :[i1a~.*_info] = {
:[body1]
};
...
static const TypeInfo :[i2a~.*_info] = {
:[body2]
};
static void :[rt1~.*_register_type.](void)
{
type_register_static(&:[i1b~.*_info]);
type_register_static(&:[i2b~.*_info]);
}
type_init(:[rt2~.*_register_type.])
'''
rewrite='''
static const TypeInfo :[i1a][] = {
{
:[body1]
},
{
:[body2]
},
};

DEFINE_TYPES(:[i1a])
'''
rule='''
where
:[i1a] == :[i1b],
:[i2a] == :[i2b],
:[rt1] == :[rt2]
'''

and re-indented manually.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20231031080603.86889-2-philmd@linaro.org>

show more ...

hw/sd: Declare QOM types using DEFINE_TYPES() macro

When multiple QOM types are registered in the same file,
it is simpler to use the the DEFINE_TYPES() macro. In
particular because type array decla

hw/sd: Declare QOM types using DEFINE_TYPES() macro

When multiple QOM types are registered in the same file,
it is simpler to use the the DEFINE_TYPES() macro. In
particular because type array declared with such macro
are easier to review.

Mechanical transformation using the following comby script:

[pattern-x1]
match='''
static const TypeInfo :[i1~.*_info] = {
:[body]
};
static void :[rt1~.*_register_type.](void)
{
type_register_static(&:[i2~.*_info]);
}
type_init(:[rt2~.*_register_type.])
'''
rewrite='''
static const TypeInfo :[i1][] = {
{
:[body]
},
};

DEFINE_TYPES(:[i1])
'''
rule='where :[i1] == :[i2], :[rt1] == :[rt2]'

[pattern-x2]
match='''
static const TypeInfo :[i1a~.*_info] = {
:[body1]
};
...
static const TypeInfo :[i2a~.*_info] = {
:[body2]
};
static void :[rt1~.*_register_type.](void)
{
type_register_static(&:[i1b~.*_info]);
type_register_static(&:[i2b~.*_info]);
}
type_init(:[rt2~.*_register_type.])
'''
rewrite='''
static const TypeInfo :[i1a][] = {
{
:[body1]
},
{
:[body2]
},
};

DEFINE_TYPES(:[i1a])
'''
rule='''
where
:[i1a] == :[i1b],
:[i2a] == :[i2b],
:[rt1] == :[rt2]
'''

and re-indented manually.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20231031080603.86889-2-philmd@linaro.org>

show more ...

hw/sd/ssi-sd: Do not create SD card within controller's realize

ssi_sd_realize() creates an "sd-card" device. This is inappropriate,
and marked FIXME.

Move it to the boards that create these devic

hw/sd/ssi-sd: Do not create SD card within controller's realize

ssi_sd_realize() creates an "sd-card" device. This is inappropriate,
and marked FIXME.

Move it to the boards that create these devices. Prior art: commit
eb4f566bbb for device "generic-sdhci", and commit 26c607b86b for
device "pl181".

The device remains not user-creatable, because its users should (and
do) wire up its GPIO chip-select line.

Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Alistair Francis <Alistair.Francis@wdc.com>
Cc: Bin Meng <bin.meng@windriver.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: "Philippe Mathieu-Daudé" <f4bug@amsat.org>
Cc: qemu-arm@nongnu.org
Cc: qemu-riscv@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20211117163409.3587705-2-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>

show more ...

qbus: Rename qbus_create_inplace() to qbus_init()

Rename qbus_create_inplace() to qbus_init(); this is more in line
with our usual naming convention for functions that in-place
initialize objects.

qbus: Rename qbus_create_inplace() to qbus_init()

Rename qbus_create_inplace() to qbus_init(); this is more in line
with our usual naming convention for functions that in-place
initialize objects.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20210923121153.23754-5-peter.maydell@linaro.org

show more ...

hw/sd: ssi-sd: Handle the rest commands with R1b response type

Besides CMD12, the following command's reponse type is R1b:

- SET_WRITE_PROT (CMD28)
- CLR_WRITE_PROT (CMD29)
- ERASE (CMD38)

Reuse t

hw/sd: ssi-sd: Handle the rest commands with R1b response type

Besides CMD12, the following command's reponse type is R1b:

- SET_WRITE_PROT (CMD28)
- CLR_WRITE_PROT (CMD29)
- ERASE (CMD38)

Reuse the same s->stopping to indicate a R1b reponse is needed.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210128063035.15674-10-bmeng.cn@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

show more ...

hw/sd: ssi-sd: Fix STOP_TRANSMISSION (CMD12) response

CMD12's response type is R1b, which is basically a R1 plus optional
addition of the busy signal token that can be any number of bytes.
A zero va

hw/sd: ssi-sd: Fix STOP_TRANSMISSION (CMD12) response

CMD12's response type is R1b, which is basically a R1 plus optional
addition of the busy signal token that can be any number of bytes.
A zero value indicates card is busy and a non-zero value indicates
the card is ready for the next command.

Current implementation sends the busy signal token without sending
the R1 first. This does not break the U-Boot/Linux mmc_spi driver,
but it does not make the VxWorks driver happy.

Move the testing logic of s->stopping in the SSI_SD_RESPONSE state
a bit later, after the first byte of the card reponse is sent out,
to conform with the spec. After the busy signal token is sent, the
state should be transferred to SSI_SD_CMD.

Fixes: 775616c3ae8c ("Partial SD card SPI mode support")
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Message-Id: <20210128063035.15674-9-bmeng.cn@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

show more ...

hw/sd: ssi-sd: Fix SEND_IF_COND (CMD8) response

The SEND_IF_COND command (CMD8) response is of format R7, but
current code returns R1 for CMD8. Fix it.

Fixes: 775616c3ae8c ("Partial SD card SPI mod

hw/sd: ssi-sd: Fix SEND_IF_COND (CMD8) response

The SEND_IF_COND command (CMD8) response is of format R7, but
current code returns R1 for CMD8. Fix it.

Fixes: 775616c3ae8c ("Partial SD card SPI mode support")
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210128063035.15674-8-bmeng.cn@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

show more ...

hw/sd: ssi-sd: Support multiple block write

For a multiple block write operation, each block begins with a multi
write start token. Unlike the SD mode that the multiple block write
ends when receivi

hw/sd: ssi-sd: Support multiple block write

For a multiple block write operation, each block begins with a multi
write start token. Unlike the SD mode that the multiple block write
ends when receiving a STOP_TRAN command (CMD12), a special stop tran
token is used to signal the card.

Emulating this by manually sending a CMD12 to the SD card core, to
bring it out of the receiving data state.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20210128063035.15674-7-bmeng.cn@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

show more ...

hw/sd: ssi-sd: Support single block write

Add 2 more states for the block write operation. The SPI host needs
to send a data start token to start the transfer, and the data block
written to the card

hw/sd: ssi-sd: Support single block write

Add 2 more states for the block write operation. The SPI host needs
to send a data start token to start the transfer, and the data block
written to the card will be acknowledged by a data response token.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
[PMD: Change VMState version id 6 -> 7]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20210128063035.15674-6-bmeng.cn@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

show more ...

hw/sd: ssi-sd: Support multiple block read

In the case of a multiple block read operation every transferred
block has its suffix of CRC16. Update the state machine logic to
handle multiple block rea

hw/sd: ssi-sd: Support multiple block read

In the case of a multiple block read operation every transferred
block has its suffix of CRC16. Update the state machine logic to
handle multiple block read.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
[PMD: Change VMState version id 5 -> 6]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20210128063035.15674-2-bmeng.cn@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

show more ...

hw/sd: ssi-sd: Use macros for the dummy value and tokens in the transfer

At present the codes use hardcoded numbers (0xff/0xfe) for the dummy
value and block start token. Replace them with macros.

hw/sd: ssi-sd: Use macros for the dummy value and tokens in the transfer

At present the codes use hardcoded numbers (0xff/0xfe) for the dummy
value and block start token. Replace them with macros.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210123104016.17485-12-bmeng.cn@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

show more ...

hw/sd: ssi-sd: Fix the wrong command index for STOP_TRANSMISSION

This fixes the wrong command index for STOP_TRANSMISSION, the
required command to interrupt the multiple block read command,
in the o

hw/sd: ssi-sd: Fix the wrong command index for STOP_TRANSMISSION

This fixes the wrong command index for STOP_TRANSMISSION, the
required command to interrupt the multiple block read command,
in the old codes. It should be CMD12 (0x4c), not CMD13 (0x4d).

Fixes: 775616c3ae8c ("Partial SD card SPI mode support")
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210123104016.17485-10-bmeng.cn@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

show more ...

hw/sd: ssi-sd: Add a state representing Nac

Per the "Physical Layer Specification Version 8.00" chapter 7.5.2,
"Data Read", there is a minimum 8 clock cycles (Nac) after the card
response and before

hw/sd: ssi-sd: Add a state representing Nac

Per the "Physical Layer Specification Version 8.00" chapter 7.5.2,
"Data Read", there is a minimum 8 clock cycles (Nac) after the card
response and before data block shows up on the data out line. This
applies to both single and multiple block read operations.

Current implementation of single block read already satisfies the
timing requirement as in the RESPONSE state after all responses are
transferred the state remains unchanged. In the next 8 clock cycles
it jumps to DATA_START state if data is ready.

However we need an explicit state when expanding our support to
multiple block read in the future. Let's add a new state PREP_DATA
explicitly in the ssi-sd state machine to represent Nac.

Note we don't change the single block read state machine to let it
jump from RESPONSE state to DATA_START state as that effectively
generates a 16 clock cycles Nac, which might not be safe. As the
spec says the maximum Nac shall be calculated from several fields
encoded in the CSD register, we don't want to bother updating CSD
to ensure our Nac is within range to complicate things.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210123104016.17485-9-bmeng.cn@gmail.com>
[PMD: Change VMState version id 4 -> 5]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

show more ...

hw/sd: ssi-sd: Suffix a data block with CRC16

Per the SD spec, a valid data block is suffixed with a 16-bit CRC
generated by the standard CCITT polynomial x16+x12+x5+1. This part
is currently missin

hw/sd: ssi-sd: Suffix a data block with CRC16

Per the SD spec, a valid data block is suffixed with a 16-bit CRC
generated by the standard CCITT polynomial x16+x12+x5+1. This part
is currently missing in the ssi-sd state machine. Without it, all
data block transfer fails in guest software because the expected
CRC16 is missing on the data out line.

Fixes: 775616c3ae8c ("Partial SD card SPI mode support")
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210123104016.17485-8-bmeng.cn@gmail.com>
[PMD: Change VMState version id 3 -> 4,
check s->mode validity in post_load()]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

show more ...

hw/sd: ssi-sd: Fix incorrect card response sequence

Per the "Physical Layer Specification Version 8.00" chapter 7.5.1,
"Command/Response", there is a minimum 8 clock cycles (Ncr) before
the card res

hw/sd: ssi-sd: Fix incorrect card response sequence

Per the "Physical Layer Specification Version 8.00" chapter 7.5.1,
"Command/Response", there is a minimum 8 clock cycles (Ncr) before
the card response shows up on the data out line. However current
implementation jumps directly to the sending response state after
all 6 bytes command is received, which is a spec violation.

Add a new state PREP_RESP in the ssi-sd state machine to handle it.

Fixes: 775616c3ae8c ("Partial SD card SPI mode support")
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Tested-by: Pragnesh Patel <pragnesh.patel@sifive.com>
Reviewed-by: Pragnesh Patel <pragnesh.patel@sifive.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210123104016.17485-4-bmeng.cn@gmail.com>
[PMD: Change VMState version id 2 -> 3]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

show more ...

hw/ssi: Rename SSI 'slave' as 'peripheral'

In order to use inclusive terminology, rename SSI 'slave' as
'peripheral', following the specification resolution:
https://www.oshwa.org/a-resolution-to-re

hw/ssi: Rename SSI 'slave' as 'peripheral'

In order to use inclusive terminology, rename SSI 'slave' as
'peripheral', following the specification resolution:
https://www.oshwa.org/a-resolution-to-redefine-spi-signal-names/

Patch created mechanically using:

$ sed -i s/SSISlave/SSIPeripheral/ $(git grep -l SSISlave)
$ sed -i s/SSI_SLAVE/SSI_PERIPHERAL/ $(git grep -l SSI_SLAVE)
$ sed -i s/ssi-slave/ssi-peripheral/ $(git grep -l ssi-slave)
$ sed -i s/ssi_slave/ssi_peripheral/ $(git grep -l ssi_slave)
$ sed -i s/ssi_create_slave/ssi_create_peripheral/ \
$(git grep -l ssi_create_slave)

Then in VMStateDescription vmstate_ssi_peripheral we restored
the "SSISlave" migration stream name (to avoid breaking migration).

Finally the following files have been manually tweaked:
- hw/ssi/pl022.c
- hw/ssi/xilinx_spips.c

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20201012124955.3409127-4-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

Use OBJECT_DECLARE_SIMPLE_TYPE when possible

This converts existing DECLARE_INSTANCE_CHECKER usage to
OBJECT_DECLARE_SIMPLE_TYPE when possible.

$ ./scripts/codeconverter/converter.py -i \
--patte

Use OBJECT_DECLARE_SIMPLE_TYPE when possible

This converts existing DECLARE_INSTANCE_CHECKER usage to
OBJECT_DECLARE_SIMPLE_TYPE when possible.

$ ./scripts/codeconverter/converter.py -i \
--pattern=AddObjectDeclareSimpleType $(git grep -l '' -- '*.[ch]')

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Paul Durrant <paul@xen.org>
Message-Id: <20200916182519.415636-6-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

show more ...

Use DECLARE_*CHECKER* macros

Generated using:

$ ./scripts/codeconverter/converter.py -i \
--pattern=TypeCheckMacro $(git grep -l '' -- '*.[ch]')

Reviewed-by: Daniel P. Berrangé <berrange@redha

Use DECLARE_*CHECKER* macros

Generated using:

$ ./scripts/codeconverter/converter.py -i \
--pattern=TypeCheckMacro $(git grep -l '' -- '*.[ch]')

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-12-ehabkost@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-13-ehabkost@redhat.com>
Message-Id: <20200831210740.126168-14-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

show more ...

Move QOM typedefs and add missing includes

Some typedefs and macros are defined after the type check macros.
This makes it difficult to automatically replace their
definitions with OBJECT_DECLARE_TY

Move QOM typedefs and add missing includes

Some typedefs and macros are defined after the type check macros.
This makes it difficult to automatically replace their
definitions with OBJECT_DECLARE_TYPE.

Patch generated using:

$ ./scripts/codeconverter/converter.py -i \
--pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]')

which will split "typdef struct { ... } TypedefName"
declarations.

Followed by:

$ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \
$(git grep -l '' -- '*.[ch]')

which will:
- move the typedefs and #defines above the type check macros
- add missing #include "qom/object.h" lines if necessary

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-9-ehabkost@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-10-ehabkost@redhat.com>
Message-Id: <20200831210740.126168-11-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

show more ...

hw/sd: Rename sdbus_read_data() as sdbus_read_byte()

The sdbus_read_data() method do a single byte access on the data
line of a SD bus. Rename it as sdbus_read_byte() and document it.

Signed-off-by

hw/sd: Rename sdbus_read_data() as sdbus_read_byte()

The sdbus_read_data() method do a single byte access on the data
line of a SD bus. Rename it as sdbus_read_byte() and document it.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200814092346.21825-4-f4bug@amsat.org>

show more ...

sd: Use ERRP_GUARD()

If we want to check error after errp-function call, we need to
introduce local_err and then propagate it to errp. Instead, use
the ERRP_GUARD() macro, benefits are:
1. No need o

sd: Use ERRP_GUARD()

If we want to check error after errp-function call, we need to
introduce local_err and then propagate it to errp. Instead, use
the ERRP_GUARD() macro, benefits are:
1. No need of explicit error_propagate call
2. No need of explicit local_err variable: use errp directly
3. ERRP_GUARD() leaves errp as is if it's not NULL or
&error_fatal, this means that we don't break error_abort
(we'll abort on error_set, not on error_propagate)

If we want to add some info to errp (by error_prepend() or
error_append_hint()), we must use the ERRP_GUARD() macro.
Otherwise, this info will not be added when errp == &error_fatal
(the program will exit prior to the error_append_hint() or
error_prepend() call). No such cases are being fixed here.

This commit is generated by command

sed -n '/^SD (Secure Card)$/,/^$/{s/^F: //p}' \
MAINTAINERS | \
xargs git ls-files | grep '\.[hc]$' | \
xargs spatch \
--sp-file scripts/coccinelle/errp-guard.cocci \
--macro-file scripts/cocci-macro-file.h \
--in-place --no-show-diff --max-width 80

Reported-by: Kevin Wolf <kwolf@redhat.com>
Reported-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200707165037.1026246-4-armbru@redhat.com>
[ERRP_AUTO_PROPAGATE() renamed to ERRP_GUARD(), and
auto-propagated-errp.cocci to errp-guard.cocci. Commit message
tweaked again.]

show more ...

qdev: Use returned bool to check for failure, Coccinelle part

The previous commit enables conversion of

qdev_prop_set_drive_err(..., &err);
if (err) {
...
}

to

if (!qdev_prop_

qdev: Use returned bool to check for failure, Coccinelle part

The previous commit enables conversion of

qdev_prop_set_drive_err(..., &err);
if (err) {
...
}

to

if (!qdev_prop_set_drive_err(..., errp)) {
...
}

Coccinelle script:

@@
identifier fun = qdev_prop_set_drive_err;
expression list args;
typedef Error;
Error *err;
@@
- fun(args, &err);
- if (err)
+ if (!fun(args, &err))
{
...
}

One line break tidied up manually.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200707160613.848843-33-armbru@redhat.com>

show more ...