Revision tags: v9.0.3, v8.2.7, v7.2.14 |
|
#
e3d08143 |
| 13-Sep-2024 |
Peter Maydell <peter.maydell@linaro.org> |
hw: Use device_class_set_legacy_reset() instead of opencoding
Use device_class_set_legacy_reset() instead of opencoding an assignment to DeviceClass::reset. This change was produced with: spatch --
hw: Use device_class_set_legacy_reset() instead of opencoding
Use device_class_set_legacy_reset() instead of opencoding an assignment to DeviceClass::reset. This change was produced with: spatch --macro-file scripts/cocci-macro-file.h \ --sp-file scripts/coccinelle/device-reset.cocci \ --keep-comments --smpl-spacing --in-place --dir hw
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240830145812.1967042-8-peter.maydell@linaro.org
show more ...
|
Revision tags: v9.1.0, v9.1.0-rc4, v9.1.0-rc3, v9.1.0-rc2, v9.1.0-rc1, v9.1.0-rc0, v9.0.2, v8.2.6, v7.2.13, v9.0.1, v8.2.5, v7.2.12, v8.2.4, v8.2.3, v7.2.11, v9.0.0, v9.0.0-rc4, v9.0.0-rc3, v9.0.0-rc2, v9.0.0-rc1, v9.0.0-rc0, v8.2.2, v7.2.10, v8.2.1, v8.1.5, v7.2.9, v8.1.4, v7.2.8 |
|
#
0aa6c7df |
| 21-Dec-2023 |
Richard Henderson <richard.henderson@linaro.org> |
hw/ssi: Constify VMState
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20231221031652.119827-56-richard.henderson@linaro.org>
|
Revision tags: v8.2.0, v8.2.0-rc4, v8.2.0-rc3, v8.2.0-rc2, v8.2.0-rc1, v7.2.7, v8.1.3, v8.2.0-rc0, v8.1.2, v8.1.1, v7.2.6, v8.0.5, v8.1.0, v8.1.0-rc4, v8.1.0-rc3, v7.2.5, v8.0.4, v8.1.0-rc2, v8.1.0-rc1, v8.1.0-rc0, v8.0.3, v7.2.4, v8.0.2, v8.0.1, v7.2.3, v7.2.2, v8.0.0, v8.0.0-rc4, v8.0.0-rc3, v7.2.1, v8.0.0-rc2, v8.0.0-rc1, v8.0.0-rc0, v7.2.0, v7.2.0-rc4, v7.2.0-rc3, v7.2.0-rc2, v7.2.0-rc1, v7.2.0-rc0, v7.1.0, v7.1.0-rc4, v7.1.0-rc3, v7.1.0-rc2, v7.1.0-rc1, v7.1.0-rc0, v7.0.0, v7.0.0-rc4, v7.0.0-rc3, v7.0.0-rc2, v7.0.0-rc1, v7.0.0-rc0, v6.1.1, v6.2.0, v6.2.0-rc4, v6.2.0-rc3, v6.2.0-rc2, v6.2.0-rc1, v6.2.0-rc0, v6.0.1, v6.1.0, v6.1.0-rc4, v6.1.0-rc3, v6.1.0-rc2, v6.1.0-rc1, v6.1.0-rc0, v6.0.0, v6.0.0-rc5, v6.0.0-rc4, v6.0.0-rc3, v6.0.0-rc2, v6.0.0-rc1, v6.0.0-rc0, v5.2.0, v5.2.0-rc4, v5.2.0-rc3, v5.2.0-rc2, v5.2.0-rc1, v5.2.0-rc0 |
|
#
ec7e429b |
| 12-Oct-2020 |
Philippe Mathieu-Daudé <f4bug@amsat.org> |
hw/ssi: Rename SSI 'slave' as 'peripheral'
In order to use inclusive terminology, rename SSI 'slave' as 'peripheral', following the specification resolution: https://www.oshwa.org/a-resolution-to-re
hw/ssi: Rename SSI 'slave' as 'peripheral'
In order to use inclusive terminology, rename SSI 'slave' as 'peripheral', following the specification resolution: https://www.oshwa.org/a-resolution-to-redefine-spi-signal-names/
Patch created mechanically using:
$ sed -i s/SSISlave/SSIPeripheral/ $(git grep -l SSISlave) $ sed -i s/SSI_SLAVE/SSI_PERIPHERAL/ $(git grep -l SSI_SLAVE) $ sed -i s/ssi-slave/ssi-peripheral/ $(git grep -l ssi-slave) $ sed -i s/ssi_slave/ssi_peripheral/ $(git grep -l ssi_slave) $ sed -i s/ssi_create_slave/ssi_create_peripheral/ \ $(git grep -l ssi_create_slave)
Then in VMStateDescription vmstate_ssi_peripheral we restored the "SSISlave" migration stream name (to avoid breaking migration).
Finally the following files have been manually tweaked: - hw/ssi/pl022.c - hw/ssi/xilinx_spips.c
Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20201012124955.3409127-4-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
show more ...
|
Revision tags: v5.0.1, v5.1.0, v5.1.0-rc3, v5.1.0-rc2, v5.1.0-rc1, v5.1.0-rc0, v4.2.1, v5.0.0, v5.0.0-rc4, v5.0.0-rc3, v5.0.0-rc2, v5.0.0-rc1, v5.0.0-rc0, v4.2.0, v4.2.0-rc5, v4.2.0-rc4, v4.2.0-rc3, v4.2.0-rc2, v4.1.1, v4.2.0-rc1, v4.2.0-rc0, v4.0.1, v3.1.1.1, v4.1.0, v4.1.0-rc5 |
|
#
d6454270 |
| 12-Aug-2019 |
Markus Armbruster <armbru@redhat.com> |
Include migration/vmstate.h less
In my "build everything" tree, changing migration/vmstate.h triggers a recompile of some 2700 out of 6600 objects (not counting tests and objects that don't depend o
Include migration/vmstate.h less
In my "build everything" tree, changing migration/vmstate.h triggers a recompile of some 2700 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h).
hw/hw.h supposedly includes it for convenience. Several other headers include it just to get VMStateDescription. The previous commit made that unnecessary.
Include migration/vmstate.h only where it's still needed. Touching it now recompiles only some 1600 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-16-armbru@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
show more ...
|
#
64552b6b |
| 12-Aug-2019 |
Markus Armbruster <armbru@redhat.com> |
Include hw/irq.h a lot less
In my "build everything" tree, changing hw/irq.h triggers a recompile of some 5400 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h).
Include hw/irq.h a lot less
In my "build everything" tree, changing hw/irq.h triggers a recompile of some 5400 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h).
hw/hw.h supposedly includes it for convenience. Several other headers include it just to get qemu_irq and.or qemu_irq_handler.
Move the qemu_irq and qemu_irq_handler typedefs from hw/irq.h to qemu/typedefs.h, and then include hw/irq.h only where it's still needed. Touching it now recompiles only some 500 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190812052359.30071-13-armbru@redhat.com>
show more ...
|
Revision tags: v4.1.0-rc4, v3.1.1, v4.1.0-rc3, v4.1.0-rc2, v4.1.0-rc1, v4.1.0-rc0 |
|
#
0b8fa32f |
| 23-May-2019 |
Markus Armbruster <armbru@redhat.com> |
Include qemu/module.h where needed, drop it from qemu-common.h
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-4-armbru@redhat.com> [Rebased with conflicts res
Include qemu/module.h where needed, drop it from qemu-common.h
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-4-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c; ui/cocoa.m fixed up]
show more ...
|
Revision tags: v4.0.0, v4.0.0-rc4, v3.0.1, v4.0.0-rc3, v4.0.0-rc2, v4.0.0-rc1, v4.0.0-rc0, v3.1.0, v3.1.0-rc5, v3.1.0-rc4, v3.1.0-rc3, v3.1.0-rc2, v3.1.0-rc1, v3.1.0-rc0 |
|
#
7d3912f5 |
| 24-Aug-2018 |
Peter Maydell <peter.maydell@linaro.org> |
hw/ssi/pl022: Correct wrong DMACR and ICR handling
In the PL022, register offset 0x20 is the ICR, a write-only interrupt-clear register. Register offset 0x24 is DMACR, the DMA control register. We
hw/ssi/pl022: Correct wrong DMACR and ICR handling
In the PL022, register offset 0x20 is the ICR, a write-only interrupt-clear register. Register offset 0x24 is DMACR, the DMA control register. We were incorrectly implementing (a stub version of) DMACR at 0x20, and not implementing anything at 0x24. Fix this bug.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180820141116.9118-21-peter.maydell@linaro.org Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
show more ...
|
#
139d941e |
| 24-Aug-2018 |
Peter Maydell <peter.maydell@linaro.org> |
hw/ssi/pl022: Correct wrong value for PL022_INT_RT
The PL022 interrupt registers have bits allocated as: 0: ROR (receive overrun) 1: RT (receive timeout) 2: RX (receive FIFO half full or less) 3
hw/ssi/pl022: Correct wrong value for PL022_INT_RT
The PL022 interrupt registers have bits allocated as: 0: ROR (receive overrun) 1: RT (receive timeout) 2: RX (receive FIFO half full or less) 3: TX (transmit FIFO half full or less)
A cut and paste error meant we had the wrong value for the PL022_INT_RT constant. This bug doesn't affect device behaviour, because we don't implement the receive timeout feature and so never set that interrupt bit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180820141116.9118-20-peter.maydell@linaro.org Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
show more ...
|
#
13391a56 |
| 24-Aug-2018 |
Peter Maydell <peter.maydell@linaro.org> |
hw/ssi/pl022: Use DeviceState::realize rather than SysBusDevice::init
Move from the legacy SysBusDevice::init method to using DeviceState::realize.
Signed-off-by: Peter Maydell <peter.maydell@linar
hw/ssi/pl022: Use DeviceState::realize rather than SysBusDevice::init
Move from the legacy SysBusDevice::init method to using DeviceState::realize.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180820141116.9118-19-peter.maydell@linaro.org Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
show more ...
|
#
275ff67f |
| 24-Aug-2018 |
Peter Maydell <peter.maydell@linaro.org> |
hw/ssi/pl022: Don't directly call vmstate_register()
Use the DeviceState vmsd pointer rather than calling vmstate_register() directly.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Messag
hw/ssi/pl022: Don't directly call vmstate_register()
Use the DeviceState vmsd pointer rather than calling vmstate_register() directly.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180820141116.9118-18-peter.maydell@linaro.org Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
show more ...
|
#
66d9aa79 |
| 24-Aug-2018 |
Peter Maydell <peter.maydell@linaro.org> |
hw/ssi/pl022: Set up reset function in class init
Currently the PL022 calls pl022_reset() from its class init function. Make it register a DeviceState reset method instead, so that we reset the devi
hw/ssi/pl022: Set up reset function in class init
Currently the PL022 calls pl022_reset() from its class init function. Make it register a DeviceState reset method instead, so that we reset the device on system reset.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180820141116.9118-17-peter.maydell@linaro.org Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
show more ...
|
#
1d52866f |
| 24-Aug-2018 |
Peter Maydell <peter.maydell@linaro.org> |
hw/ssi/pl022: Allow use as embedded-struct device
Create a new include file for the pl022's device struct, type macros, etc, so that it can be instantiated using the "embedded struct" coding style.
hw/ssi/pl022: Allow use as embedded-struct device
Create a new include file for the pl022's device struct, type macros, etc, so that it can be instantiated using the "embedded struct" coding style.
While we're adding the new file to MAINTAINERS, add also the .c file, which was missing an entry.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180820141116.9118-16-peter.maydell@linaro.org Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
show more ...
|
Revision tags: v3.0.0, v3.0.0-rc4, v2.12.1, v3.0.0-rc3, v3.0.0-rc2, v3.0.0-rc1, v3.0.0-rc0, v2.11.2, v2.12.0, v2.12.0-rc4, v2.12.0-rc3, v2.12.0-rc2, v2.12.0-rc1, v2.12.0-rc0, v2.11.1, v2.10.2, v2.11.0, v2.11.0-rc5, v2.11.0-rc4, v2.11.0-rc3, v2.11.0-rc2, v2.11.0-rc1, v2.11.0-rc0, v2.10.1, v2.9.1, v2.10.0, v2.10.0-rc4, v2.10.0-rc3, v2.10.0-rc2, v2.10.0-rc1, v2.10.0-rc0, v2.8.1.1, v2.9.0, v2.9.0-rc5, v2.9.0-rc4, v2.9.0-rc3, v2.8.1, v2.9.0-rc2, v2.9.0-rc1, v2.9.0-rc0, v2.7.1, v2.8.0, v2.8.0-rc4, v2.8.0-rc3, v2.8.0-rc2, v2.8.0-rc1, v2.8.0-rc0, v2.6.2, v2.7.0, v2.7.0-rc5, v2.7.0-rc4, v2.6.1, v2.7.0-rc3, v2.7.0-rc2, v2.7.0-rc1, v2.7.0-rc0, v2.6.0, v2.5.1.1, v2.6.0-rc5, v2.6.0-rc4, v2.6.0-rc3, v2.6.0-rc2, v2.6.0-rc1, v2.6.0-rc0, v2.5.1, v2.5.0 |
|
#
03dd024f |
| 15-Dec-2015 |
Paolo Bonzini <pbonzini@redhat.com> |
hw: explicitly include qemu/log.h
Move the inclusion out of hw/hw.h, most files do not need it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
#
17b7f2db |
| 26-Jan-2016 |
Peter Maydell <peter.maydell@linaro.org> |
arm devices: Clean up includes
Clean up includes so that osdep.h is included first and headers which it implies are not included manually.
This commit was created with scripts/clean-includes.
Sign
arm devices: Clean up includes
Clean up includes so that osdep.h is included first and headers which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1453832250-766-36-git-send-email-peter.maydell@linaro.org
show more ...
|
#
8fd06719 |
| 21-Jan-2016 |
Alistair Francis <alistair.francis@xilinx.com> |
ssi: Move ssi.h into a separate directory
Move the ssi.h include file into the ssi directory.
While touching the code also fix the typdef lines as checkpatch complains.
Signed-off-by: Alistair Fra
ssi: Move ssi.h into a separate directory
Move the ssi.h include file into the ssi directory.
While touching the code also fix the typdef lines as checkpatch complains.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
show more ...
|
Revision tags: v2.5.0-rc4, v2.5.0-rc3, v2.5.0-rc2, v2.5.0-rc1, v2.5.0-rc0, v2.4.1, v2.4.0.1, v2.4.0, v2.3.1, v2.4.0-rc4, v2.4.0-rc3, v2.4.0-rc2, v2.4.0-rc1, v2.4.0-rc0, v2.3.0, v2.3.0-rc4, v2.3.0-rc3, v2.3.0-rc2, v2.3.0-rc1, v2.3.0-rc0, v2.2.1, v2.1.3, v2.2.0, v2.2.0-rc5, v2.2.0-rc4, v2.2.0-rc3, v2.2.0-rc2, v2.2.0-rc1, v2.2.0-rc0, v2.1.2, v2.1.1, v2.0.2, v2.0.1, v2.1.0, v2.1.0-rc5, v2.1.0-rc4, v2.1.0-rc3, v1.7.2, v2.1.0-rc2, v2.1.0-rc1, v2.1.0-rc0 |
|
#
8f1e884b |
| 13-May-2014 |
Juan Quintela <quintela@redhat.com> |
savevm: Remove all the unneeded version_minimum_id_old (arm)
After commit 767adce2d, they are redundant. This way we don't assign them except when needed. Once there, there were lots of cases wher
savevm: Remove all the unneeded version_minimum_id_old (arm)
After commit 767adce2d, they are redundant. This way we don't assign them except when needed. Once there, there were lots of cases where the ".fields" indentation was wrong:
.fields = (VMStateField []) { and .fields = (VMStateField []) {
Change all the combinations to:
.fields = (VMStateField[]){
The biggest problem (apart from aesthetics) was that checkpatch complained when we copy&pasted the code from one place to another.
Signed-off-by: Juan Quintela <quintela@redhat.com> [PMM: fixed minor conflict, corrected commit message typos] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
show more ...
|
Revision tags: v2.0.0, v2.0.0-rc3, v2.0.0-rc2 |
|
#
d8d0a0bc |
| 03-Apr-2014 |
Michael S. Tsirkin <mst@redhat.com> |
pl022: fix buffer overun on invalid state load
CVE-2013-4530
pl022.c did not bounds check tx_fifo_head and rx_fifo_head after loading them from file and before they are used to dereference array.
pl022: fix buffer overun on invalid state load
CVE-2013-4530
pl022.c did not bounds check tx_fifo_head and rx_fifo_head after loading them from file and before they are used to dereference array.
Reported-by: Michael S. Tsirkin <mst@redhat.com Reported-by: Anthony Liguori <anthony@codemonkey.ws> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
show more ...
|
Revision tags: v2.0.0-rc1, v2.0.0-rc0, v1.7.1, v1.6.2, v1.7.0, v1.7.0-rc2, v1.7.0-rc1, v1.7.0-rc0, v1.6.1, v1.5.3, v1.6.0, v1.6.0-rc3, v1.6.0-rc2, v1.6.0-rc1, v1.6.0-rc0 |
|
#
3d29bcee |
| 27-Jul-2013 |
Andreas Färber <afaerber@suse.de> |
pl022: QOM cast cleanup
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
#
ce556e0b |
| 27-Jul-2013 |
Andreas Färber <afaerber@suse.de> |
pl022: Rename pl022_state to PL022State
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
Revision tags: v1.5.2, v1.5.1 |
|
#
29776739 |
| 07-Jun-2013 |
Paolo Bonzini <pbonzini@redhat.com> |
hw/s*: pass owner to memory_region_init* functions
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
#
2c9b15ca |
| 06-Jun-2013 |
Paolo Bonzini <pbonzini@redhat.com> |
memory: add owner argument to initialization functions
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
Revision tags: v1.4.2, v1.5.0, v1.5.0-rc3, v1.5.0-rc2, v1.5.0-rc1, v1.5.0-rc0, v1.4.1 |
|
#
49ab747f |
| 01-Mar-2013 |
Paolo Bonzini <pbonzini@redhat.com> |
hw: move target-independent files to subdirectories
This patch tackles all files that are compiled once, moving them to subdirectories of hw/.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|